Electronic properties of bilayer and trilayer graphyne in the presence of electric field

The influence of electric field on the electronic properties of bilayer and trilayer graphyne has been studied using the density functional theory. We have investigated alpha graphyne due to its analogous to graphene. The bilayer and trilayer graphyne with different stacking style configurations have been considered. Our results indicate that the electronic properties of alpha graphyne are insensitive to the number of graphyne layer and configuration. The bilayer and trilayer graphyne are semimetal similar to the monolayer graphyne. It is found that applying a uniform electric field perpendicular to the graphyne sheet changes the electronic properties of AB-stacked bilayer and ABC-stacked trilayer graphyne so that they become semiconductor. The band gaps of the bilayer and trilayer graphyne with these configurations are enhanced by increasing strength of the electric field. Therefore, possibility of controlling the electronic properties of graphyne by applying electric field makes graphyne as a good candidate for next generation nanoelectronic devices.     

Adsorption of Hydrazoic Acid on Pristine Graphyne Sheet: A Computational StudySCI北大核心CSCD

Herein we have investigated the interaction between hydrazoic acid(HN3) and a pristine graphyne system based on density functional theory(DFT) method using generalized gradient approximation. The van der Waals dispersion correction is also considered for predicting the possibility of using the graphyne system for detection of hydrazoic acid. Pristine graphyne has a band gap of 0.453 eV, which decreases to 0.424 eV when HN3 is adsorbed on graphyne. The electrical conductivity of HN3-adsorbed graphyne is greater than that of its pristine counterpart. Charge transfer analysis reveals that the HN3-adsorbed graphyne system behaves as an n-type semiconductor; however, its pristine analogue acts as an intrinsic semiconductor. Pristine graphyne has zero dipole moment; however, its interaction with HN3 increases its dipole moment. The electronic properties of graphyne is significantly influenced by the presence of HN3, leading to the possibility of designing graphyne-based sensors for HN3 detection.     

First principle study of adsorption of boron-halogenated system on pristine graphyne

To ensure the possibility of using graphyne as a gas sensor, we have studied the adsorption of boron-halogenated system on pristine graphyne with the help of density functional theory using generalized gradient approximation. Depending on binding energy the most stable orientation, adsorption strength and optimal distance between the above mention molecules and graphyne surface have been determined. The band gap of graphyne slightly increases with the adsorption of the boron-halogenated system. The graphyne system behaves as n-type semiconductor when it interacts with BI₃ and BCl₃ molecules, and it behaves as p-type semiconductor when interaction with BF₃ molecule takes place. Our result reveals that the electronic properties of pristine graphyne are highly influenced by the adsorption of boron-halogenated molecule. We have observed that pristine graphyne has zero electric dipole moment, but with the interaction of boron-halogenated molecule, a significant change in the electric dipole moment takes place. Hence, by measuring the electric dipole moment change, graphyne-based gas sensor can be design for the detection of above-mentioned molecules.     

Adsorption of polycyclic aromatic hydrocarbons onto graphyne: Comparisons with graphene

Density functional theory calculations were implemented to expand the knowledge about graphyne and its interaction with polycyclic aromatic hydrocarbons (PAHs). Due to the porous character of graphyne, the adsorption strength of PAHs onto graphyne surfaces is expected to be lower with respect to graphene (a perfect π‐extended system). However, there are not quantitative evidences for this assumption. This work shows that the adsorption strength of adsorbed PAHs onto γ‐graphyne nanosheets (GY) is weakened in 12 ? 23% with respect to the adsorption onto graphene, with a decrease of 10 ? 20% in the dispersive interactions. The adsorption energies (in eV) of the GY–PAH systems can be straightforward obtained as E _ads/eV≈0.033N _H + 0.031N _C, where N _H and N _C is the number of H and C atoms in the aromatic molecule, respectively. This equation predicts the binding energy of graphene–graphyne bilayers with a value of ～31 meV/atom. Analysis of the electronic properties shows that PAHs behaves as n‐dopants for GY, introducing electrons in GY and also reducing its bandgap in up to ～0.5 eV. Strong acceptor or donor substituted PAHs decrease the bandgap of γ‐graphyne in up to ～0.8 eV, with changes in its valence or conduction band, depending on the chemical nature of the adsorbate. Finally, these data will serve for future studies related to the bandgap engineering of graphyne surfaces by nonaggressive molecular doping, and for the development of graphyne‐based materials with potential applications in the removal of persistent aromatic pollutants.     

Density-functional calculations of HCN adsorption on the pristine and Si-doped graphynes

Graphyne, a lattice of benzene rings connected by acetylene bonds, is one-atom-thick planar sheet of sp- and sp²-bonded carbons differing from the hybridization of graphene (considered as pure sp²). Here, HCN adsorption on the pristine and Si-doped graphynes was studied using density-functional calculations in terms of geometric, energetic, and electronic properties. It was found that HCN molecule is weakly adsorbed on the pristine graphyne and slightly affects its electronic properties. While, Si-doped graphyne shows high reactivity toward HCN, and, in the most favorable state, the calculated adsorption energy is about ?10.1 kcal/mol. The graphyne, in which sp-carbon was substituted by Si atom, is more favorable for HCN adsorption in comparison with sp²-carbon. It was shown that the electronic properties of Si-doped graphyne are strongly sensitive to the presence of HCN molecule and therefore it may be used in sensor devices.     

Carbon networks based on benzocyclynes. 6. synthesis of graphyne substructures via directed alkyne metathesis

Intramolecular ring closing alkyne metathesis afforded the graphyne biscyclyne (3) in high macrocyclization yield and good overall yield. This methodology also furnished the tris[12]cyclyne 4, which contains the longest linear diphenylacetylene conjugation pathway for any graphyne substructure based on the tribenzo[12]cyclyne core.     

Nonlinear Finite Element Analysis of γ-Graphyne Structures under Shearing

In this study, a nonlinear, spring-based finite element approach is employed in order to predict the nonlinear mechanical response of graphyne structures under shear loading. Based on Morse potential functions, suitable nonlinear spring finite elements are formulated simulating the interatomic interactions of different graphyne types. Specifically, the four well-known types of γ-graphyne, i.e., graphyne-1 also known as graphyne, graphyne-2 also known as graphdiyne, graphyne-3, and graphyne-4 rectangular sheets are numerically investigated applying appropriate boundary conditions representing shear load. The obtained finite element analysis results are employed to calculate the in-plane shear stress–strain behaviour, as well as the corresponding mechanical properties as shear modulus and shear strength. Comparisons of the present graphyne shearing response predictions with other corresponding estimations are performed to validate the present research results.     

氢取代石墨单炔的机械化学合成及其电催化特性

氢取代石墨单炔是一种仅由苯环上的sp²杂化碳和氢与乙炔基上的sp杂化碳组成具有与石墨炔相似平面网状结构的二维富碳材料。本文以碳化钙和三溴苯为原料,通过机械化学方法合成了氢取代石墨单炔,并通过X射线电子能谱、拉曼光谱、固体核磁共振成像¹H谱和透射电子显微镜加以证实。紫外可见漫反射吸收光谱和电化学测试表明样品为p型半导体,带隙为2.30 eV,在硫酸钠溶液(pH = 7)中的析氧起始过电位为0.04 V,在催化产氧和光催化方面具有应用潜力。     

Syntheses and Properties of Graphyne Fragments: Trigonally Expanded Dehydrobenzo[12]annulenes

We present herein the synthesis and properties of the largest hitherto unknown graphyne fragment, namely trigonally expanded tetrakis(dehydrobenzo[12]annulene)s (tetrakis‐DBAs). Intramolecular three‐fold alkyne metathesis reactions of hexakis(arylethynyl)DBAs 9 a and 9 b using Fürstner’s Mo catalyst furnished tetrakis‐DBAs 8 a and 8 b substituted with tert‐butyl or branched alkyl ester groups in moderate and fair yields, respectively, demonstrating that the metathesis reaction of this protocol is a powerful tool for the construction of graphyne fragment backbones. For comparison, hexakis(arylethynyl)DBAs 9 c – g have also been prepared. The one‐photon absorption spectrum of tetrakis‐DBA 8 a bearing tert‐butyl groups revealed a remarkable bathochromic shift of the absorption cut‐off (λ_cutoff) compared with those of previously reported graphyne fragments due to extended π‐conjugation. Moreover, in the two‐photon absorption spectrum, 8 a showed a large cross‐section for a pure hydrocarbon because of the planar para‐phenylene‐ethynylene conjugation pathways. Hexakis(arylethynyl)‐DBAs 9 c – e and 9 g and tetrakis‐DBA 8 b bearing electron‐withdrawing groups aggregated in chloroform solutions. Comparison between the free energies of 9 e and 8 b bearing the same substituents revealed the more favorable association of the latter due to stronger π–π interactions between the extended π‐cores. Polarized optical microscopy observations, DSC, and XRD measurements showed that 8 b and 9 e with branched alkyl ester groups displayed columnar rectangular mesophases. By the time‐resolved microwave conductivity method, the columnar rectangular phase of 8 b was shown to exhibit a moderate charge‐carrier mobility of 0.12 cm² V^?1 s^?1. These results indicate that large graphyne fragments can serve as good organic semiconductors.     

Electronic structures and bonding of graphyne sheet and its BN analog

Using density functional theory and generalized gradient approximation for exchange and correlation, we present theoretical analysis of the electronic structure of recently synthesized graphyne and its boron nitride analog (labeled as BN-yne). The former is composed of hexagonal carbon rings joined by C-chains, while the latter is composed of hexagonal BN rings joined by C-chains. We have explored the nature of bonding and energy band structure of these unique systems characterized by sp and sp(2) bonding. Both graphyne and BN-yne are found to be direct bandgap semiconductors. The bandgap can be modulated by changing the size of hexagonal ring and the length of carbon chain, providing more flexibilities of energy band engineering for device applications. The present study sheds theoretical insight on better understanding of the properties of the novel carbon-based 2D structures beyond the graphene sheet.     

HYDROGEN ADSORPTION AND STORAGE ON PALLADIUM-FUNCTIONALIZED GRAPHYNE AND ITS BORON NITRIDE ANALOGUE

Journal of Structural Chemistry - This study investigates adsorption of a hydrogen molecule on palladium-functionalized graphyne and its boron nitride analogue using the mPW1PW91 functional. The...     

Theoretical investigation of Br2 and Cl2 detection by the pristine and Co-doped graphyne

Structural Chemistry - The Br2 and Cl2 interaction with the intrinsic and Co-doped graphyne nanosheets has been explored by density functional theory calculations. Two vertical and parallel...     

Carbon networks based on dehydrobenzoannulenes. 3. Synthesis of graphyne substructures

This Letter describes the synthesis of the first macrobicyclic subunits of the hypothetical all-carbon network graphyne. Key to synthetic success is an intramolecular Sonogashira cross-coupling sequence.     

A Triazine-Based Analogue of Graphyne: Scalable Synthesis and Applications in Photocatalytic Dye Degradation and Bacterial Inactivation

Graphyne, a theorized carbon allotrope possessing only sp- and sp²-hybridized carbon atoms, holds great potentials in many fields, especially in catalysis and energy-transfer/storage devices. Using a bottom-up strategy, we synthesized a new N-doped graphyne analogue, triazine- and 1,4-diethynylbenzene-based graphyne TA-BGY , in solution in gram-scale. The unique sp/sp² carbon-conjugated TA-BGY possesses an extended porous network structure with a BET surface area of approximately 300 m² g⁻¹. Owing to its low optical band gap (1.44 eV), TA-BGY was expected to have many applications, which were exemplified by the photodegradation of methyl orange and photocatalytic bacterial inactivation.     

Supramolecular graphyne: a C(sp)-H...N hydrogen-bonded unique network structure of 2,4,6-triethynyl-1,3,5-triazine

The crystallization of 2,4,6-triethynyl-1,3,5-triazine (2) leads to a pi-stacked layered structure of a C(sp)-H...N hydrogen-bonded unique hexagonal network structure, which may be regarded as a supramolecular analogue of a hitherto unknown graphyne network: in-plane intermolecular interactions are short and linear H...N contacts (2.31 and 2.34 A) and the interlayer separation is 3.23 A.     

Synthesis and properties of trefoil-shaped tris(hexadehydrotribenzo[12]annulene) and tris(tetradehydrotribenzo[12]annulene)

[reaction: see text] Trefoil-shaped tris(hexadehydrotribenzo[12]annulene) possessing a substructure of the ultimate two-dimensional C(sp)-C(sp(2)) network, graphyne, and the related tris(tetradehydrotribenzo[12]annulene) were synthesized, and their ground- and excited-state properties were investigated.     

Direct Formation of C−C Triple‐Bonded Structural Motifs by On‐Surface Dehalogenative Homocouplings of Tribromomethyl‐Substituted Arenes

On‐surface synthesis shows significant potential in constructing novel nanostructures/nanomaterials, which has been intensely studied in recent years. The formation of acetylenic scaffolds provides an important route to the fabrication of emerging carbon nanostructures, including carbyne, graphyne, and graphdiyne, which feature chemically vulnerable sp‐hybridized carbon atoms. Herein, we designed and synthesized a tribromomethyl‐substituted compound. By using a combination of high‐resolution scanning tunneling microscopy, non‐contact atomic force microscopy, and density functional theory calculations, we demonstrated that it is feasible to convert these compounds directly into C?C triple‐bonded structural motifs by on‐surface dehalogenative homocoupling reactions. Concurrently, sp³‐hybridized carbon atoms are converted into sp‐hybridized ones, that is, an alkyl group is transformed into an alkynyl moiety. Moreover, we achieved the formation of dimer structures, one‐dimensional molecular wires, and two‐dimensional molecular networks on Au(111) surfaces, which should inspire further studies towards two‐dimensional graphyne structures.     

Theoretical investigation of electromechanical effects for graphyne carbon nanotubes

We present a theoretical study of the electronic and mechanical properties of graphyne-based nanotubes (GNTs). These semiconducting nanotubes result from the elongation of one-third of the covalent interconnections of graphite-based nanotubes by the introduction of yne groups. The effect of charge injection on the dimensions of GNTs was investigated using tight-binding calculations. Low amounts of electron injection are predicted to cause qualitatively different responses for armchair and zigzag graphyne nanotubes. Although the behavior is qualitatively similar to the usual carbon nanotubes, the charge-induced strains are predicted to be smaller for the GNTs than for ordinary single walled carbon nanotubes.     

On‐Surface Assembly of Hydrogen‐ and Halogen‐Bonded Supramolecular Graphyne‐Like Networks

Demonstrated here is a supramolecular approach to fabricate highly ordered monolayered hydrogen‐ and halogen‐bonded graphyne‐like two‐dimensional (2D) materials from triethynyltriazine derivatives on Au(111) and Ag(111). The 2D networks are stabilized by N???H?C(sp) bonds and N???Br?C(sp) bonds to the triazine core. The structural properties and the binding energies of the supramolecular graphynes have been investigated by scanning tunneling microscopy in combination with density‐functional theory calculations. It is revealed that the N???Br?C(sp) bonds lead to significantly stronger bonded networks compared to the hydrogen‐bonded networks. A systematic analysis of the binding energies of triethynyltriazine and triethynylbenzene derivatives further demonstrates that the X₃‐synthon, which is commonly observed for bromobenzene derivatives, is weaker than the X₆‐synthon for our bromotriethynyl derivatives.