Synthetic application of in situ generation of N-acyliminium ions from α-amido p-tolylsulfones for the synthesis of α-amino nitriles

In the presence of catalytic amount of bismuth bromide (5 mol %) the α-amido p-tolylsulfones are converted into N-acyliminium ions, which undergo the nucleophilic addition of trimethylsilyl cyanide (TMSCN) to provide the N-protected α-amino nitriles in very good yield. A variety of α-amido p-tolylsulfones were prepared from aromatic as well as aliphatic aldehydes for the synthesis of α-amino nitriles.     

The first bismuth(III)-catalyzed guanylation of thioureas

This work describes the first catalytic bismuth-promoted synthesis of polysubstituted guanidines in good yields through the guanylation reaction of N-benzoyl or N-phenylthioureas with primary and secondary amines, but now employing equimolar amounts of each organic reagent. Both bismuth iodine and bismuth nitrate were efficient as inorganic thiophiles at only 5 mol % in relation to substrates, being the first example of inorganic thiophiles acting in guanylation at catalytic levels.     

Bismuth triflate catalyzed Claisen rearrangement of allyl naphthyl ethers

Bismuth triflate was found to be an efficient catalyst for the Claisen rearrangement of allyl naphthyl ethers. The reaction proceeds smoothly with a catalytic amount of bismuth triflate (20 mol %) to afford the corresponding ortho-allyl naphthol in moderate to good yields in most cases.     

One-pot conversion of aromatic bromides and aromatics into aromatic nitriles via aryllithiums and their DMF adduct

Various aromatic bromides and iodides were smoothly converted into the corresponding aromatic nitriles in good to moderate yields by the treatment with n-butyllithium and subsequently DMF, followed by treatment with molecular iodine in aq NH₃. The same treatment of typical aromatics and heteroaromatics with n-butyllithium and subsequently DMF, followed by treatment with molecular iodine in aq NH₃ also provided the corresponding aromatic nitriles in good yields. Moreover, the same treatment of aromatic bromides and aromatics with half amount of DIH (1,3-diiodo-5,5-dimethylhydantoin) instead of molecular iodine worked effectively to give the corresponding aromatic nitriles, respectively, in good yields. These reactions are novel and environmentally benign one-pot methods for the preparation of aromatic nitriles from aromatic bromides and aromatics, respectively, through the formation of aryllithiums and their DMF adducts.     

The structural chemistry of Bi14MO24 (M=Cr, Mo, W) phases: bismuth oxides containing discrete MO4 tetrahedra

The phases Bi₁₄MO₂₄ (M=Cr, Mo, W) have been studied using differential scanning calorimetry, variable temperature X-ray powder diffraction and neutron powder diffraction. All three compounds were found to undergo a phase change, on cooling, from the previously reported tetragonal symmetry (I4/m) to monoclinic symmetry (C2/m). Transition temperatures were determined to be ∼306 K (M=W) and ∼295 K (M=Mo), whereas a gradual transition between 275 and 200 K was observed for M=Cr. The high and low temperature structures are very similar, as indicated by the relationship between the monoclinic and tetragonal unit cell parameters: a_m=√2a_t, b_m=c_t, c_m=a_t, β∼135°. High-resolution neutron powder diffraction data, collected at 400 and 4 K, were used to establish the nature of the transition, which was found to involve a reduction in the statistical possibilities for orientation of the MO₄ tetrahedra. However, in both tetragonal and monoclinic variants, a degree of orientational disorder of the tetrahedra occurs to give partially occupied sites in the average unit cell.     

Facile preparation of aromatic esters from aromatic bromides with ethyl formate or DMF and molecular iodine via aryllithium

Various aromatic bromides were treated with n-BuLi and subsequently with ethyl formate, followed by the reaction with ethanol and molecular iodine in the presence of K₂CO₃ to provide the corresponding aromatic ethyl esters in good yields. Moreover, aromatic bromides could be transformed into the corresponding aromatic methyl esters in good yields by the treatment with n-BuLi and subsequently with DMF, followed by the reaction with methanol, molecular iodine, and K₂CO₃. Some aromatics could be also converted into the corresponding aromatic esters in good yields by the treatment with n-BuLi, and subsequently with ethyl formate or DMF, followed by the reaction with molecular iodine and K₂CO₃. The present reactions offer a novel route for the transition-metal-free, carbon-monoxide-free, and therefore environmentally benign one-pot conversion of aromatic bromides and aromatics into aromatic esters.     

One-dimensional inorganic arrangement in the bismuth oxalate hydroxide Bi(C2O4)OH

Single crystals of Bi(C₂O₄)OH were obtained by the slow diffusion of Bi³⁺ cations through silica gel impregnated with oxalic acid. The structure was solved in the Pnma space group with a=6.0853(2) Å, b=11.4479(3) Å, c=5.9722(2) Å, leading to R=0.0188 and wR=0.0190 from 513 unique reflections. The bismuth coordination polyhedron is a BiO₆E pentagonal bipyramid with the lone pair E sitting at an axial vertex. The opposite axial vertex is occupied by a hydroxyl oxygen atom, which is also an equatorial corner of a neighboring BiO₆E bipyramid. The sharing of the hydroxyl oxygen atoms build zig-zag chains running down the [100] direction. These chains are aligned in a sheet parallel to the (010) plane and are further connected through oxalate ions to form a three-dimensional arrangement. On heating, Bi(C₂O₄)OH decomposes to the meta-stable quadratic β-Bi₂O₃ phase.     

Catalytic stereoselective Mannich reaction under solvent-free conditions

Silicon tetrachloride catalyzed one-pot three-component Mannich reaction of cyclic ketones, aromatic aldehydes, and aromatic amine under solvent-free conditions affords the corresponding β-amino ketones with excellent yield and good to excellent anti-selectivity.     

Bismuth trichloride-catalyzed oxy-Michael addition of water and alcohol to α,β-unsaturated ketones

An efficient method was developed for the conjugate addition of water to various α,β-unsaturated ketones by using bismuth(III) chloride as a catalyst. The reactions proceeded smoothly in the presence of a catalytic amount of BiCl₃ (20 mol%) in aqueous media to furnish a variety of synthetically useful β-hydroxyl ketones in moderate to good yields. Apart from water molecule, various alcohols could also be employed as nucleophiles to react with α,β-unsaturated ketones, leading to β-alkoxyl ketones in modest to high yields. In addition, the mild reaction conditions also entailed the conjugate addition reactions to proceed with the tolerance to a range of functional groups.     

Bi(NO3)3 · 5H2O mediated synthesis of 4,4′-diaminotriarylmethane leuco malachite compounds under solvent-free conditions

In this report, we described the synthesis and characterization of a variety of diaminotriarylmethane derivatives with dimethylamino functional groups. These compounds were synthesized by the tandem regio-selective electrophilic aromatic substitution reaction of N,N-dimethylaniline with aryl aldehydes to form the corresponding diaminotriarylmethane compounds. In our strategy, Bi(NO₃)₃ was used as a catalyst under solvent free conditions to afford the desired products in good to excellent yields.      

Environment-friendly organic synthesis using bismuth compounds. Bismuth triflate catalyzed synthesis of substituted 3,4-dihydro-2H-1-benzopyrans

A highly catalytic method for the synthesis of dihydrobenzopyrans from salicylaldehydes has been developed. An extension of this method to the synthesis of a pyrano[2,3,b]benzopyran has also been achieved. Bi(OTf)₃·xH₂O (1 < x < 4) (0.1 mol%) smoothly catalyzes the condensation of substituted salicylaldehydes with 2,2-dimethoxypropane to give the corresponding substituted 3,4-dihydro-2H-1-benzopyrans as a mixture of diastereomers (9:1) in moderate yields. The relative configuration of the methoxy groups in the two diastereomers was established by NOE experiments. The advantages of this method include the use of an easy to handle, inexpensive and relatively non-toxic catalyst.     

Synthesis and structure of 5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines

Hypervalent organobismuth compounds, 6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines, with 13 different substituents on the bismuth atom including halogens, alkyl, alkenyl, alkynyl, aryl, or phenylthio groups have been synthesized. A key compound, 12-chloro-6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocine, which is a precursor for other azabismocines, has been synthesized by two different procedures; one is based on Akiba’s method using 2-bromobenzylbromide as one of the starting materials and the other is a newly developed one using a cheaper starting material, 2-chlorobenzyl chloride. The structures of 12 new bismuth compounds were determined by X-ray diffraction. The eight-membered tetrahydroazabismocine ring has proved to be highly flexible and the hypervalent Bi-N bond distances vary ranging from 2.568(3) to 2.896(5) Å, depending on the electronic nature of the substituents on the bismuth atom. The Bi-N bond distances have good linear relationship against Hammett’s σ_m constants.     

BiI3 mediated difunctionalization of α-methylstyrenes,including azidohydroxylation and azidoiodination

BiI₃ mediated vicinal azidohydroxylation of α-methylstyrenes 1 with NaN₃ in wet DMF affords β-azidoalcohols 4 in good yields. In dry DMF, β-azidoiodides 6 are also obtained by BiI₃ mediated vicinal azidoiodination of α-methylstyrenes 1 with NaN₃. This present protocol provides the bond formations of carbon-azido/carbon-hydroxy (N₃─CC─OH) bond and carbon-azido/carbon-iodo (N₃─CC─I) under water-controlled conditions.     

Practical one-pot conversion of aryl bromides and β-bromostyrenes into aromatic nitriles and cinnamonitriles

Various aryl bromides were efficiently converted into the corresponding aromatic nitriles in good yields by the treatment with Mg turnings and subsequently DMF, followed by treatment with molecular iodine and aq NH₃. The same treatment of aryl bromides, which are weakly reactive to Mg turnings, with ⁱPrMgCl·LiCl and subsequently DMF, followed by the treatment with molecular iodine and aq NH₃ also afforded the corresponding aromatic nitriles in good yields. On the other hand, when N-formylpiperidine was used instead of DMF, p-substituted β-bromostyrenes were converted into the corresponding p-substituted cinnamonitriles, i.e., α,β-unsaturated nitriles, in good to moderate yields by the same procedure. The reactions were carried out by means of a simple experimental procedure and did not require any toxic metal cyanides or expensive rare metals. Therefore, the present reactions are practical and environmentally benign one-pot methods for the preparation of aromatic nitriles, cinnamonitriles, and aliphatic nitriles from aryl bromides, β-bromostyrenes, and alkyl bromides, respectively, through the formation of Grignard reagents and their DMF or N-formylpiperidine adducts.     

HClO4-SiO2 catalyzed stereoselective synthesis of β-amino ketones via a direct Mannich-type reaction

The HClO₄-SiO₂ catalyzed three-component, one-pot Mannich reaction of ketones, aromatic aldehydes and aromatic amines is carried out in ethanol to afford the corresponding β-amino ketones in good yields and high stereoselectivities in favor of the anti-isomer. Three new compounds are reported.     

Facile preparation of aromatic ketones from aromatic bromides and arenes with aldehydes

Aromatic ketones were efficiently prepared in good yields by the reactions of aryl bromides with n-BuLi, followed by the reactions with aromatic aldehydes or aliphatic aldehydes and the subsequent treatment with molecular iodine and K₂CO₃, in a one-pot method. The same treatment of arenes, instead of aromatic bromides, also provided the corresponding aromatic ketones in good yields. Using these methods, various diaryl ketones and alkyl aryl ketones bearing electron-rich aromatics and electron-deficient aromatics could be prepared efficiently by a simple, transition-metal-free, and therefore environmentally benign experimental procedure.     

Improvement of the Friedel–Crafts benzoylation by using bismuth trifluoromethanesulfonate in 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid under microwave irradiation

Bismuth trifluoromethanesulfonate (bismuth triflate) catalyzed the Friedel–Crafts benzoylation of activated aromatic compounds when dissolved in 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]OTf) ionic liquid. Immobilization of bismuth triflate (5 mol %) in [BMIM]OTf allowed the synthesis of aryl ketones in good to excellent yields with short reaction times under microwave irradiation. This catalytic system was easily recovered and reused several times without any significant loss of the activity.     

Synthesis of fully substituted pyrazolo[3,4-b]pyridine-5-carboxamide derivatives via a one-pot four-component reaction

A one-pot four-component reaction of an aliphatic or aromatic amine, diketene, an aromatic aldehyde and 1,3-diphenyl-1H-pyrazol-5-amine in the presence of p-toluenesulfonic acid as a catalyst has been developed. In this reaction, a new class of fully substituted pyrazolo[3,4-b]pyridine-5-carboxamide derivatives is produced under mild reaction conditions and in good yields at ambient temperature.     

A novel three-component reaction for the synthesis of N-cyclohexyl-3-aryl-quinoxaline-2-amines

Ferric perchlorate catalyzes the three-component condensation reaction of o-phenylenediamine, aromatic aldehydes, and cyclohexyl isocyanide to afford the corresponding N-cyclohexyl-3-aryl-quinoxaline-2-amines in good yields.