1D coordination polymers of silver(I) and copper(II) based on bis(N-heterocyclic carbene) ligands: Synthesis and structural studies

The alkyl chain-linked diimidazolium (or dibenzimidazolium) salts, 1,1′-diethyl-4,4′-tetramethylene-diimidazolium-diiodide (L¹H₂·I₂) and 1,1′-diethyl-3,3′-trimethylene-dibenzimidazolium-diiodide (L²H₂·I₂), and their silver(I) and copper(II) coordination polymers, [L¹AgI]_n (1) and [L²Cu₂I₄]_n (2), have been prepared and characterized. Complex 1 is a 1D helical polymer generated by bidentated carbene ligands (L¹) and Ag(I) atoms. The 1D polymer of 2 is formed by bidentated carbene ligands (L²) and coplanar quadrilateral Cu₂I₂ units. 3D supramolecular frameworks in the crystal packings of 1 and 2 are formed via intermolecular weak interactions, including C–H···π contacts, π–π interactions and C–H···I hydrogen bonds.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Effects of steroidal carriers of alkylating agents on the phase transition in DPPC membrane bilayers

Several steroidal esters of alkylating agents have been synthesized and tested in vitro and in vivo in various experimental cancer types. 3β-Hydroxy-17α-aza-D-homo-5-androsten-7,17-dione-N,N-bis(2-chloroethyl) aminophenylacetate (I) is a highly active compound. DSC scans show differences between the alkylating agent alone and in conjugation with the steroidal part in the broadening and lowering of the phase transition of DPPC bilayers. These differences may in part explain the better pharmacokinetic profile and lower toxicity of conjugated congener I versus the alkylating agent alone.     

Temperature dependence on recrystallisation of the magnesium phthalocyanine (MgPc) in triethylamine

Three complexes of magnesium phthalocyaninato(2−) derivatives in the crystalline form, MgPc(H₂O)·(C₂H₅)₃N – (I), MgPc(H₂O)₂·2(C₂H₅)₃N – (II) and MgPc(H₂O)₂ – (III), depending on the thermal recrystallisation conditions were obtained and structurally characterised. In complex I, the Mg center exhibits square-pyramidal (4 + 1) coordination environment, whereas in II and III the Mg center of MgPc the biaxial (4 + 2) coordination. Owing to the interaction of the positively charged Mg center with oppositely charged oxygen atom of water molecule in an axial position in I, the Mg atom is significantly displaced (0.451(2) Å) from the plane defined by four isoindole N atoms and leads to distortion of the planar Pc(2−) macrocycle to the saucer-shape form. In II and III due to the biaxial (4 + 2) coordination of the Mg center of MgPc, the Mg atom lies on a N₄-isoindole plane. The triethylamine solvent molecules in I and II interact with mono or bis(aqua)magnesium phthalocyanine via   O–H?$?$N hydrogen bonds. The axial Mg–O bond in I is significantly shorter than that in the II and III complexes. The strength of the Mg–O bond in these complexes is correlated with their thermal stability. From among the complexes only complex I exhibits an intense near-IR absorption band in the solid-state. The spectra of I, II and III in solution are very similar.     

Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

From lithium ketazides to isomeric silylketazine-rings - imine-enamine tautomerism

Di(tert-butylmethyl)ketazine (I) reacts with n-BuLi in a 1:1 molar ratio to give a monolithium salt (II). The reaction of II with ^tBu₂SiF₂ in n-hexane leads, even in a 1:1 molar ratio, to the formation of the isomeric five- and four-membered ring compounds 1 and 2. Compound 1 has an endocyclic imine and an exocyclic enamine unit. The opposite is found for 2. The acyclic monosubstitution product, ^tBu₂SiFCH₂-C^tBuN-NC^tBuCH₃ (III) could not be isolated. It reacts with the lithium ketazide to give 1 or 2. I is reformed. The reaction in THF yields only the four-membered ring 2. In a comparable reaction of the lithium ketazide and (H₃C)₂SiF₂, the substitution product 3 could be isolated. A possible formation mechanism for 2 includes an intermediate silene IV. Both compounds 1 and 2 react with H₃C-OH under cleavage of the endocyclic Si-N-bond to give the addition product 5. The reaction mechanism includes a hydrogen shift from a nitrogen atom to a carbon atom via an imine-enamine tautomerism. In a 2:1 molar ratio, n-BuLi and the di(tert-butylmethyl)-ketazine (I) form the dilithium salt, 6. Compound 6 crystallizes from THF as trimer with four imine and two enamine units. A seven-membered ring (7) isomeric to 1 and 2 is the result of the reaction of 6 with ^tBu₂SiF₂. Compound 7 contains one imine and one enamine unit in the ring skeleton.The comparable reaction of the (CH₃)₃Si-substituted dilithium-di(tert-butylmethyl)ketazide and ^tBu₂SiF₂ yields the five-membered ring compound 8 with one endocyclic imine and one exocyclic enamine unit.Quantum chemical calculations of 1, 2, 7 and the intermediate silene IV have been carried out and show a low energy difference between the cyclic silyl-ketazine isomers.     

Preparation and reactivity of polyfunctional six- and eight-membered cyclic silicates

Six- and eight-membered cyclic silicates with reactive SiH or Si-vinyl functional groups have been prepared: hexakis(dimethylsiloxy)cyclotrisiloxane (I), hexakis(vinyldimethylsiloxy)cyclotrisiloxane (II), octakis(dimethylsiloxy)cyclotetrasiloxane (III) and octakis(vinyldimethylsiloxy)cyclotetrasiloxane (IV). Reaction of pseudo wollastonite (Ca₃Si₃O₉) with dimethylchlorosilane or vinyldimethylchlorosilane gives I and II, respectively. IV has been prepared similarly by reaction of octakis[chloro calcium oxy]cyclotetrasilicate [Ca₈Si₄O₁₂Cl₈] with vinyldimethylchlorosilane. On the other hand, acid catalyzed siloxane exchange between tetramethyldisiloxane and octakis(trimethylsiloxy)cyclotetrasiloxane (V) gave III. Cyclic silicates (I-VI) are surprisingly resistant to acid catalyzed ring opening polymerization. In addition, II, IV, V and hexakis(trimethylsiloxy)cyclotrisiloxanes (VI) are resistant to phosphazene P₄-t-Bu superbase catalyzed ring opening polymerization.     

A study of the physico-chemical properties of 1,3,5-trihydroxy-1,3,5-triazin-2,4,6[1H,3H,5H]-trione

Acetyl (Ia) and pivaloyl (Ib) triesters of the 1N,3N,5N-trihydroxy-1,3,5-triazin-2,4,6[1H,3H,5H]-trione (I) were synthesised. The spectrophotometric and potentiometric investigation of I revealed a weak acidic properties of triprotonic acid (pK_a1=5.23, pK_a2=6.32, and pK_a3=7.93). The MS and TGA analyses of I indicated on hydroxyisocyanate as possible degradation product. The chelating ability of I with Fe(III)-ion was preliminary explored. IR measurements of aqueous solutions of I in the presence of Fe(III) ion showed the possible chelating ability of all hydroxamic moieties. The chemical structures and properties of investigated compounds were derived from the results of IR, ¹H and ¹³C NMR, UV and MS spectrometric data, as well as thermogravimetric and potentiometric analysis.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

Ring-opening metathesis polymerization (ROMP) of N-cycloalkyl-7-oxanorbornene dicarboximides by well-defined ruthenium initiators

Ring-opening metathesis polymerization (ROMP) of exo-N-(1-adamantyl)-7-oxanorbornene-5,6-dicarboximide (AdONDI) (3a), exo-N-cyclohexyl-7-oxanorbornene-5,6-dicarboximide (ChONDI) (3b) and exo-N-phenyl-7-oxanorbornene-5,6-dicarboximide (PhONDI) (3c) using well-defined alkylidene ruthenium catalysts (PCy₃)₂(CI)₂RuCHPh (I) and (1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) (PCy₃)CI₂RuCHPh (II) was studied. The catalysts I and II gave polymers with around 70% and 50% trans vinylene content, respectively. The homopolymer of 3a had a T_g of 198 °C, while poly-3b showed a T_g of 122 °C. Copolymers of 3a, 3b and 3c with norbornene (NB) showed significant T_g increases over poly-NB.     

Informative secondary chiroptics in binary molecular organogel systems for donor-acceptor energy transfer

Pyrene-doped l-glutamide-based lipidic derivatives with different alkyl lengths (C_n-g-Pyr; n = 4, 8 and 12) were newly synthesized. All of the C_n-g-Pyr dissolved and showed thermotopically and lyotropically-induced excimer formations accompanied by induction of the positive Cotton effect in their CD spectra, indicating chirally ordered stacking. However, when C₄-g-Pyr and C₁₂-g-Pyr were mixed in a certain molar ratio, an unusual CD pattern from positive to negative ones was observed. In this study, energy transfer efficiency was investigated in a binary system of C_n-g-Pyr with C₁₂-g-TPP. The results revealed that simple modification of the alkyl length of C_n-g-Pyr enables enhancement of the energy transfer efficiency with C₁₂-g-TPP.     

Synthesis, structures and some chemical and electrochemical properties of E-1,2-diferrocenyl-3-methylthioprop-2-enone and its ketals

2,3-Diferrocenyl-1-methylthiocyclopropenylium iodide reacts with water, metal alkoxides, phenolates and with alcohols in the presence of Et₃N to give E-1,2-diferrocenyl-3-methylthioprop-2-enone or its ketals. Their structures were established based on data from ¹H and ¹³C NMR spectroscopy and X-ray diffraction analysis. The mechanistic aspects of these reactions are discussed. Electrochemical properties of 8 and 13b have been studied. The compounds present two oxidation processes (I-II), attributed to the oxidations of the ferrocenes groups, E^0′(I), E^0′(II), ΔE^0′(II-I) and comproportionation constant K_com are reported.     

Syntheses and crystal structures of copper mixed-ligand complexes of multidentate enaminones and acetate anions

Reactions of ferrocenoylacetone with 2-(aminomethyl)pyridine and N-(2-hydroxyethyl)-1,2-diaminoethane afford the multidentate enaminones HL¹ and H₃L², respectively. Reactions of copper acetate with the two enaminones generate the corresponding mixed-ligand complexes I and II, which are formulated as [CuL¹(OAc)] and [Cu(H₂L²)(OAc)], respectively. The structures of HL¹, I and II have been determined by single-crystal X-ray crystallography. In complex I, HL¹ acts as a monoanionic tridentate donor via the carbonyl oxygen, deprotonated enamine nitrogen and pyridyl nitrogen atoms, the acetate anion is monodentate and the coordination geometry of the central metal is square planar. In complex II, H₃L² is a monoanionic tetradentate ligand via the carbonyl oxygen, deprotonated enamine nitrogen, secondary amine nitrogen and hydroxy oxygen atoms, the acetate anion is monodentate and the coordination geometry of the central metal is a distorted trigonal bipyramid.     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

C-H?Cl relevant discrepancy on structure, magnetic and electronic conductivity of two mixed-valence CuCu coordination polymers

Two mixed-valence Cu^ICu^II coordination polymers [Cu^ICu^II(qdiol)ClL]_n (qdiol²⁻=2,3-dioxyquinoxalinate, L=2,2′-bipyridine, 1; L=1,10-phenanthroline, 2) were obtained in basic ethanolic solution of CuCl₂, 1,4-dihydro-2,3-quinoxalinedione and L under the solvothermal condition. 1 and 2 are similar in composition, but differ remarkably in structure. The coordination modes of Cu^II, qdiol²⁻ and L are identical in both complexes. But the Cu^I ions are two- and three-coordinated, and the Cl⁻ ions are terminal and bridging, in 1 and 2, respectively, which are relevant to the significantly different C-H?Cl hydrogen bonding pattern of bpy and phen. The temperature variable magnetic susceptibilities show that 1 is paramagnetic and 2 is weakly antiferromagnetic. The complex impedance spectroscopic studies indicate that both 1 and 2 are semiconductors and 2 is more conducting.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Ionic liquid phase organic synthesis (IoLiPOS) methodology applied to the three component preparation of 2-thioxo tetrahydropyrimidin-4-(1H)-ones under microwave dielectric heating

An ionic liquid phase organic synthesis (IoLiPOS) has been developed for the preparation of 2-thioxo tetrahydropyrimidin-4(1H)-ones. Treatment of the starting poly(ethyleneglycol)ionic liquid phases (PEG_n-ILPs) 1 with acryloyl chloride 2 afforded a serie of (PEG_n)-ILPs bound acrylate 3 in quantitative yields. Michael addition of aliphatic primary amines 5 to the PEG₁-ILPs 3(a,d) allowed the preparation of β-aminoesters 6 in high yields. Addition of alkyl isothiocyanates 7 to 6 gave the corresponding thioureido esters 8 in the third step. The final cyclization-cleavage under microwave/solventless strategy provides, under basic conditions, the expected 2-thioxo tetrahydropyrimidin-4(1H)-ones 9 in high purity after flash chromatography. According to the IoLiPOS methodology, the NMR method was used to establish loading of all the PEG-ionic liquid phases intermediates.