Calorimetric determination of enthalpies for the proton ionization of N,N-bis[2-hydroxyethyl]-2-aminoethanesulfonic acid (BES) and N-tris[hydroxymethyl]methyl-2-aminoethanesulfonic acid (TES) in water-methanol mixtures

The enthalpies of proton ionization of the biochemical buffers N,N-bis[2-hydroxyethyl]-2-aminoethanesulfonic acid (BES) and N-tris[hydroxymethyl]methyl-2-aminoethanesulfonic acid (TES) were obtained in water-methanol mixtures in which the methanol mole fraction (X_m) varied in the range 0-0.36. For both buffers, ionization enthalpy for the first proton (ΔH₁) was small in all solvent media. However, upon addition of methanol, ΔH₂ increased steadily from 22.2 to a maximum of 27.2 kJ mol⁻¹ for BES, whereas for TES it varied from 30.0 to 32.4, with a minimum of 28.6 kJ mol⁻¹ at X_m=0.123. It is noteworthy that this solvent composition lies within the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of methanol-water interactions.     

Calorimetric determination of enthalpy changes for the proton ionization of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) in water-methanol mixtures

Enthalpies for the two proton ionizations of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol the ionization enthalpy for the first proton (ΔH₁) of glycine increased from 4.4 to 9.4 kJ mol⁻¹ with a minimum of 4.1 kJ mol⁻¹ at X_m = 0.059. The ionization enthalpy of the second proton (ΔH₂) for glycine decreased from 46.3 to 38.1 kJ mol⁻¹. ΔH₁ of bicine increased from 3.5 to 7.6 kJ mol⁻¹ at X_m = 0.273 before dropping to 4.1 kJ mol⁻¹ at X_m = 0.360. ΔH₂ of bicine increased from 24.9 to 29.4 kJ mol⁻¹. For tricine, ΔH₁ increased from 6.7 to 9.8 kJ mol⁻¹ at X_m = 0.194 then dropped to 7.4 kJ mol⁻¹ at X_m = 0.360. ΔH₂ for tricine first dropped from 30.8 to 28.5 kJ mol⁻¹ at X_m = 0.059 before increasing to 33.3 kJ mol⁻¹ at X_m = 0.273. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

Calorimetric determination of enthalpy changes for the proton ionization of N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) in water–methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-tris(hydroxymethyl)methyl-4-aminobutanesulfonic acid (TABS), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS) and 3-[N-tris(hydroxymethyl)methylamino]-2-hyroxypropane sulfonic acid (TAPSO) were obtained in water–methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. The ionization enthalpy for the first proton (ΔH₁) of all three buffers was small and exhibited slight changes upon methanol addition. The ionization enthalpy of the second proton (ΔH₂) of TABS increased from 39.6 to 49.8 kJ mol⁻¹ and for TAPS from 40.1 to 43.2 kJ mol⁻¹, with a minimum of 38.2 kJ mol⁻¹ at X_m = 0.059. For TAPSO the increase was from 33.1 to 35.6 kJ mol⁻¹ at X_m = 0.194, with measurements at higher X_m precluded by low solubility of TAPSO in methanol rich solvents. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent–solvent and solvent–solute interactions.     

Cylindrospermopsin determination using 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) as the internal standard

Cylindrospermopsin (CYN) was determined by liquid chromatography/electrospray ionization-mass spectrometry (LC/ESI-MS) using 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES) as the internal standard. In the selected ion monitoring of LC/ESI-MS, m/z 414 for CYN and 237 for HEPES were monitored using the negative mode; the retention times of CYN and HEPES were 12.41 and 14.21 min, respectively. CYN was determined from peak area ratios of m/z 414/237. By the treatment of an anion exchange cartridge using a buffer at pH 10.5, CYN was isolated and condensed. No interfering peak was observed. Linearity of this method was observed at the range of 0.10-31.12 ng. Total coefficients of variation were 5.1 and 2.9% at 104 and 1038 μg CYN L⁻¹. The quantitative limit at a signal-to-noise (S/N) ratio of 10 was 0.16 ng.CYN concentration in natural waters is low. CYN in waters should be condensed for determination. This method including the treatment for isolation and condensation of CYN is useful for determination of CYN in environmental and/or drinking waters.     

Synthesis and characterization of (N→B) phenyl[N-alkyl-N-(2-alkyl)aminodiacetate-O,O′,N]boranes and phenyl[N-alkyl-N-(2-alkyl) aminodiacetate-O,O′,N]boranes

The reaction of boron heterocycles 1 and 2 with n-butyl lithium and alkyl halides led to (N→B) phenyl[N-alky-N-(2-alkyl)aminodiacetate-O,O′,N]boranes 3–6(a–b), 7(b) and 9(b), where alkyl can be in exo and/or endo position, and phenyl[N-alkyl-N-(2-alkyl)aminodiacetate-O,O′,N]boranes 7(c) and 8(c) isomers, which do not display the intramolecular N→B coordination bond. The existence of steric interactions between N-benzyl and the alkyl group at 2 position was indicated by ¹H and ¹³C NMR, while, the δ(¹¹B) values confirm the tetrahedral and trigonal environment of the ¹¹B nucleus in these compounds. Moreover, the compounds were characterized by COSY, HETCOR and homonuclear proton decoupling experiment. The study of the intramolecular N→B coordination by dynamic NMR afforded a ΔG‡ value of 81.09 kJ/mol for compound 6(b).     

Synthesis, characterization and luminescence study of dimethyl[2-(arylmethyleneimino)phenolato]gallium complexes: Crystal structure of dimethyl[N-(4-N,N′-dimethylamino) phenylmethyleneiminophenolato]gallium

Three dimethylgallium complexes of type Me₂GaL [L = 2-methoxylphenylmethyleneiminophenolato (1), N-(4-N,N′-dimethylamino)phenylmethyleneiminophenolato (2), N-(2-naphthyl)methyleneiminophenolato (3)] have been synthesized by the reaction of trimethylgallium with appropriate N-arylmethyleneiminophenol. The complexes obtained have been characterized by elemental analysis, ¹H, ¹³C{¹H} NMR, IR and mass spectroscopy, respectively. The solid structure of 2 has been determined by X-ray single crystal analysis. The gallium atom was bonded by an oxygen atom and coordinated by an imine nitrogen atom forming one five-membered ring. The stable dimmer was formed by the coordination of bridging oxygen atom of phenolate to another gallium atom. The photoluminescence of complexes 1-3 were studied. The maximum emission wavelengths of 1-3 are between 305 and 320 nm upon radiation by UV light. The electroluminescent properties of diodes using 1-3 as emitting material were measured. The blue/green electroluminescence has been observed.     

Endo and exo cyclometallated iron carbonyl complexes derived from N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine

The reaction of N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine (1) with Fe₂(CO)₉ in refluxing toluene gives endo cyclometallated iron carbonyl complexes 2 and 5, exo cyclometallated iron carbonyl complex 3, and unexpected iron carbonyl complex 4. Complexes 2, 3, and 5 are geometric isomers. Complex 5 differs from complex 2 in the switch of the original substituent from α to β position of the pyrrolyl ring, and the pyrrolyl ring bridges to the diiron centers in μ-(3,2-η¹:η²) coordination mode in stead of μ-(2,3-η¹:η²). In complex 4, the pyrrolyl moiety of the original ligand 1 has been displaced by a thienyl group, which comes from the same ligand. Single crystals of 2, 3, and 5 were subjected to the X-ray diffraction analysis. The major product 2 undergoes: (i) thermolysis to recover the original ligand 1; (ii) reduction to form a hydrogenation product, 6, of the original ligand; (iii) substitution to form a monophosphine-substituted complex 7; (iv) chemical as well as electrochemical oxidation to produce a carbonylation product, γ-butyrolactam 8.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

Ascorbate amperometric determination using conducting copolymers from aniline and N-(3-propane sulfonic acid)aniline

The sequential electrochemical polymerization of aniline and N-(3-propane sulfonic acid)aniline (PSA) is proposed to construct a sensor able to detect ascorbate at physiological conditions. Compared to poly(aniline) modified electrode, a device with improved conducting and electrochemical properties at neutral pH is obtained. The electrochemical copolymerization of the same starting materials is also carried out. For a PSA:aniline ratio of 10:90, a polymer with a similar electrochemical behavior to the one grown in the sequential mode is observed.The detection of ascorbate was tested for both configurations at pH 7.2, the modified electrode is able to determine ascorbate at 0 mV versus Ag/AgCl; an optimized sensor constructed by sequential polymerization can easily detect ascorbate concentrations with a detection limit of 2.2 μM. Uric acid and dopamine does not interfere in the ascorbate determination.     

N,N,N′,N′-Tetrakis(2-hydroxyethyl)ethylenediamine palladium(II) complex as efficient catalyst for the Suzuki/Miyaura reaction in water

A new water soluble palladium(II) complex (2) derived from N,N,N′,N′-tetrakis(2-hydroxyethyl)ethylenediamine (edteH₄) (1) was synthesized in high yield and characterized by ¹H, ¹³C, HMQC and COSY NMR spectroscopy. X-ray diffraction studies on a single crystal of 2 confirmed the cis square planar geometry; the edteH₄ ligand (1) is κ² (N,N)-coordinated with four pendant CH₂CH₂OH groups. This new complex [PdCl₂(edteH₄)] (2) and the previously synthesized triethanolamine complex [Pd(OCH₂CH₂N(CH₂CH₂OH)₂)₂] (3) were tested as catalysts for the Suzuki/Miyaura cross-coupling reaction of various aryl bromides with phenylboronic acid in water. Electronically activated aryl bromides, such as 4-bromoacetophenone and 4-bromobenzaldehyde undergo the cross-coupling with extremely high turnover numbers (TON) of up to 1,00,000 without organic solvent.     

Thermal degradation of [poly(N-vinylimidazole)-polyacrylic acid] interpolymer complexes

Interpolymer complexes of a slightly basic polymer, poly(N-vinylimidazole) (PVIm) with a strongly acidic polymer, poly(acrylic acid) (PAA) have been prepared by mixing aqueous solutions of the respective components. Spectroscopy and thermal methods were used to reveal interaction between VIm and AA moieties. FT-IR analysis showed that the nitrogen atoms at 3rd position of imidazole ring are involved in strong H-bonding with acid groups of PAA leading to a uniform and fully miscible complex structure. As the quantity of PAA increases the thermal stability of complex increases based on TG results. In the DSC analyses, the single T_g for all IPC samples showed that IPCs have good or definite miscibility over the whole range of composition as a result of H-bond formation between acrylic acid and imidazole units.     

Synthesis and biological activities of N-(1,2,4-triazole-4-yl)-N′-(fluorine-containing-phenyl)carbamimidothioates

A series of N-(1,2,4-triazole-4-yl)-N′-(fluorine-containing-phenyl)carbamimidothioates 5a-i were synthesized by reacting 4-amine-1,2,4-trizaole with corresponding aryl isothiocyanates in ethanol at room temperature and, in a subsequent step, with methyl iodide. The antifungal activities of the title compounds against the fungi Rhizoctonia solan and Pyricularia orizae were screened.     

Structural, spectral and thermal studies of substituted N-(2-pyridyl)-N′-phenylthioureas

N-2-(3-picolyl)-N′-phenylthiourea, 3PicTuPh, monoclinic, P2₁/n, a=7.617(2) b=7.197(5), c=22.889(5) Å, β=94.63(4)°, V=1250.7(1) Å³ and Z=4; N-2-(4-picolyl)-N′-phenylthiourea, 4PicTuPh, triclinic, P-1, a=7.3960(5), b=7.9660(12), c=21.600(3) Å, α=86.401(4), β=84.899(8), γ=77.769(8)°, V=1237.5(3) Å³ and Z=4; N-2-(5-picolyl)-N′-phenylthiourea, 5PicTuPh, monoclinic, P2₁/c, a=14.201(1), b=4.905(3), c=17.689(3) Å, β=91.38(1)°, V=1231.8(7) Å³ and Z=4; N-2-(6-picolyl)-N′-phenylthiourea, 6PicTuPh, monoclinic, C2/c2, a=14.713(1), b=9.367(1), c=18.227(1) Å, β=92.88(1)°, V=2515.5(1) Å³ and Z=8 and N-2-(4,6-lutidyl)-N′-phenylthiourea, 4,6LutTuPh, monoclinic, C2/c, a=11.107(2), b=11.793(2), c=20.084(4) Å, β=96.10(3)°, V=2616(1) Å³ and Z=8. Intramolecular hydrogen bonding between N′H and the pyridyl nitrogen and intermolecular hydrogen bonding involving the thione sulfur are affected by substitution of the pyridine ring, as is the planarity of the molecule. ¹H NMR studies in CDCl₃ show the NH′ hydrogen resonance considerably downfield from other resonances in the spectrum for each thiourea.     

Highly efficient electrophilic cyclization of N′-(2-alkynylbenzylidene)hydrazides

Electrophilic cyclization of N′-(2-alkynylbenzylidene)hydrazides with I₂, Br₂, or ICl under mild conditions is described. This reaction proceeds smoothly in dichloromethane at room temperature, which provides a useful method for the synthesis of functionalized isoquinolinium-2-yl amide.     

Structural characterization of a copper(II) complex containing oxidative cyclization of N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea,new ligands of 4-picolylthiourea derivatives and the precursor molecular structure of oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea

Three new compounds of aryl thiourea derivatives, namely N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea (L1), N-2-(6-picolyl)-N′-(4-methoxyphenyl)thiourea (L2) and N-2-(4-picolyl)-N′-(4-nitrophenyl)thiourea (L3), and the new copper(II) complex [Cu(4PicTz4OMePh)(OAC)(EtOH)] (C1), as a result of oxidative cyclization of the ligand (L1), were synthesized. In addition, pure precursor (P1), as the product of the oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea (L4), was isolated and characterized. Ligands (L1) and (L2) were characterized by ¹H and ¹³C NMR and single crystal X-ray analysis. ¹H NMR spectroscopy showed strong hydrogen bonding interactions between N′H-functionalities and the pyridine nitrogen atoms as well as weak intermolecular hydrogen bonding between the thione sulfur and the NH hydrogen. Structural studies of complex (C1) showed that the copper ion is five-coordinated with a square-pyramidal environment. The oxidative cyclization of ligand (L1) results in an anionic bidentate ligand in complex (C1). Both ligand (L1) and precursor (P1) crystallize as centrosymmetric dimers.     

Di-μ-hydroxy-bis(N,N,N′,N′-tetramethylenediamine)-copper(II) chloride [Cu(OH)·TMEDA]2Cl2: an efficient, practical catalyst for benzylation and allylation of amides

An efficient protocol for the benzylation or allylation of amides using the corresponding benzyl or allyl chlorides as electrophiles under basic conditions with commercially available 5 mol % of [Cu(OH)TMEDA]₂Cl₂ as catalyst was developed. Under these conditions, unprotected amino acids were benzylated without any racemization.     

Ruthenium(III) complexes with N-(acetyl)-N′-(5-R-salicylidene)hydrazines: Syntheses,structures and properties

The reactions of 1 mol equiv. each of [Ru(PPh₃)₃Cl₂] and N-(acetyl)-N′-(5-R-salicylidene)hydrazines (H₂ahsR, R = H, OCH₃, Cl, Br and NO₂) in alcoholic media afford simultaneously two types of complexes having the general formulae [Ru(HahsR)(PPh₃)₂Cl₂] and [Ru(ahsR)(PPh₃)₂Cl]. The complexes have been characterized by elemental analysis, magnetic, spectroscopic and electrochemical measurements. Molecular structures of [Ru(HahsH)(PPh₃)₂Cl₂] and [Ru(ahsH)(PPh₃)₂Cl] have been confirmed by X-ray crystallography. In both species, the PPh₃ ligands are trans to each other. The bidentate HahsH⁻ coordinates to the metal ion via the O atom of the deprotonated amide and the imine–N atom in [Ru(HahsH)(PPh₃)₂Cl₂]. In HahsH⁻, the phenolic OH is involved in a strong intramolecular hydrogen bond with the uncoordinated amide N atom forming a seven-membered ring. In [Ru(ahsH)(PPh₃)₂Cl], the tridentate ahsH²⁻ binds to the metal ion via the deprotonated amide O, the imine N and the phenolate O atoms. In the electronic spectra, the green [Ru(HahsR)(PPh₃)₂Cl₂] and brown [Ru(ahsR)(PPh₃)₂Cl] complexes display several absorptions in the ranges 385–283 and 457–269 nm, respectively. Both complexes are low-spin and display rhombic EPR spectra in frozen solutions. Both types of complexes are redox active and display a quasi-reversible ruthenium(III) to ruthenium(II) reduction which is sensitive to the polar effect of the substituent on the chelating ligand. The reduction potentials are in the ranges −0.21 to −0.12 and −0.42 to −0.21 V (versus Ag/AgCl) for [Ru(HahsR)(PPh₃)₂Cl₂] and [Ru(ahsR)(PPh₃)₂Cl], respectively.     

Lithiation of 2-(chloroaryl)-2-aryl-1,3-dioxolanes with butyllithium activated by N,N,N′,N″,N″-pentamethyldiethylenetriamine

Intramolecular competition of variously substituted phenyl rings of benzophenone ketals in lithiation reactions proved to be a useful tool to study both ortho-directing ability and long-range effects of the substituents. The regioselectivities observed in the reaction of benzophenone ketals having one or two chloro substituents in one of the aryl rings with butyllithium complexed to N,N,N′,N″,N″-pentamethyldiethylenetriamine demonstrate the significance of both ortho- and meta-acidifying effect of the chloro substituents. The lithio species thus generated were carboxylated resulting in new polysubstituted benzoic acids.