Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

Synthesis and thermochemistry of MgO·3B2O3·3.5H2O

A new magnesium borate MgO·3B₂O₃·3.5H₂O has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₆O₉(OH)₂]·2.5H₂O. The enthalpy of solution of MgO·3B₂O₃·3.5H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5595.02±4.85) kJ mol⁻¹ of MgO·3B₂O₃3.5H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

配位化合物Zn(Met)3(NO3)2·H2O(s)(Met=L-α-蛋氨酸)的低温热容及标准摩尔生成焓

利用精密绝热热量仪测定了化合物配合物Zn(Met)₃(NO₃)₂·H₂O (s) (Met=L-α-蛋氨酸)在78-371 K温区的摩尔热容. 通过热容曲线解析, 得到了该配合物的起始脱水温度为T_D=325.10 K. 将该温区的摩尔热容实验值用最小二乘法拟合得到了摩尔热容(C_p)对约化温度(T)的多项式方程, 由此计算得到了配合物的舒平热容值和热力学函数值. 基于设计的热化学循环, 选择100 mL of 2 mol·L^-1 HCl为量热溶剂, 利用等温环境溶解-反应热量计, 得到了298.15 K配合物的标准摩尔生成焓为Δ_fH_m⁰[Zn(Met)₃(NO₃)₂·H₂O(s),s]=-(1472.65±0.76) J·mol^-1.     

Synthesis, characterization, and thermochemistry of a new form of 2MgO·3B2O3·17H2O

A new magnesium borate, β-2MgO·3B₂O₃·17H₂O, has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR, and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₃O₃(OH)₅]·6H₂O. The enthalpy of solution of β-2MgO·3B₂O₃·17H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(10256.39±4.93) kJ mol⁻¹ of β-2MgO·3B₂O₃·17H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).     

Vaporization of DyI3(s) and thermochemistry of the homocomplexes (DyI3)2(g) and (DyI3)3(g)

The vaporization of DyI₃(s) was investigated in the temperature range between 833 and 1053 K by the use of Knudsen effusion mass spectrometry. The ions DyI₂⁺, DyI₃⁺, Dy₂I₄⁺, Dy₂I₅⁺, Dy₃I₇⁺, and Dy₃I₈⁺ were detected in the mass spectrum of the equilibrium vapor. The gaseous species DyI₃, (DyI₃)₂, and (DyI₃)₃ were identified and their partial pressures determined. Enthalpies and entropies of sublimation resulted according to the second- and third-law methods. The following sublimation enthalpies at 298 K were determined for the gaseous species given in brackets: 274.8±8.2 kJ mol⁻¹ [DyI₃], 356.0±11.3 kJ mol⁻¹ [(DyI₃)₂], and 436.6±14.6 kJ mol⁻¹ [(DyI₃)₃]. The enthalpy changes of the dissociation reactions (DyI₃)₂=2 DyI₃ and (DyI₃)₃=3 DyI₃ were obtained as Δ_dH°(298)=193.3±5.6 and 390.3±13.0 kJ mol⁻¹, respectively.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Synthesis, characterization and thermochemistry of K2B5O8(OH)·2H2O

A pure hydrated potassium borate K₂B₅O₈(OH)·2H₂O has been synthesized under mild hydrothermal conditions and characterized by single-crystal X-ray diffraction, XRD, FT-IR, Raman spectra and DTA-TG. The crystal structure consists of two K-O polyhedra and [B₅O₈(OH)]²⁻ polyborate anion. The enthalpy of formation was determined to be −4772.6 ± 4.0 kJ mol⁻¹ by solution calorimetry.     

Crystal structure and characterization of Rb2Ca[B4O5(OH)4]2·8H2O

Dirubidium calcium tetraborate octahydrate, Rb₂Ca[B₄O₅(OH)₄]₂·8H₂O, was prepared by reaction of Rb-borate aqueous solution with CaCl₂ and it's structure has been determined by single-crystal X-ray diffraction data. It crystallizes in the orthorhombic system, space group P2₁2₁2₁ with unit cell parameters, Z=4, The structure contains alternate layers of [B₄O₅(OH)₄]²⁻ polyanions separated by water molecules and Rb, Ca cations. The isolated [B₄O₅(OH)₄]²⁻ is constructed from two BO₃(OH) tetrahedron groups and two BO₂(OH) triangular groups joined at common oxygen atoms. The two BO₃(OH) tetrahedron groups are further linked by means of an oxygen bridge across the ring. The Ca²⁺ ion displays seven coordination, while the two non-equivalent Rb⁺ ions display nine and seven coordination, respectively. Infrared and Raman (4000-400 cm⁻¹) spectra of Rb₂Ca[B₄O₅(OH)₄]₂·8H₂O were recorded at room temperature and analyzed. Fundamental vibrational modes were identified and band assignments were made. The dehydration of this hydrated mixed borate occurs in one step and leads to an amorphous phase which undergoes a crystallization.     

Determination of the enthalpy of fusion of K3TaF8 and K3TaOF6

The areas of the fusion and crystallization peaks of K₃TaF₈ and K₃TaOF₆ have been measured using the DSC mode of the high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities and the temperature dependence of the used calorimetric method sensitivity, the values of the enthalpy of fusion of K₃TaF₈ at temperature of fusion 1039 K: Δ_fusH_m(K₃TaF₈; 1039 K) = (52 ± 2) kJ mol⁻¹ and of K₃TaOF₆ at temperature of fusion 1055 K: Δ_fusH_m(K₃TaOF₆; 1055 K) = (62 ± 3) kJ mol⁻¹ have been determined.     

Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

Change in mechanistic pathway of hydroboration: A detailed kinetic study of H2BBr·SMe2 and HBBr2·SMe2

Hydroboration reactions of 1-octene and 1-hexyne with H₂BBr·SMe₂ in CH₂Cl₂ were studied as a function of concentration and temperature, using ¹¹B NMR spectroscopy. The reactions exhibited saturation kinetics. The rate of dissociation of dimethyl sulfide from boron at 25 °C was found to be (7.36 ± 0.59 and 7.32 ± 0.90) × 10⁻³ s⁻¹ for 1-octene and 1-hexyne, respectively. The second order rate constants, k₂, for hydroboration worked out to be 7.00 ± 0.81 M s⁻¹ and 7.03 ± 0.70 M s⁻¹, while the overall composite second order rate constants, k K, were (3.30 ± 0.43 and 3.10 ± 0.37) × 10⁻² M s⁻¹, respectively at 25 °C. The entropy and enthalpy values were found to be large and positive for k₁, whilst for k₂ these were large and negative, with small values for enthalpies. This is indicative of a limiting dissociative (D) for the dissociation of Me₂S and associative mechanism (A) for the hydroboration process. The overall activation parameters, ΔH^≠ and ΔS^≠, were found to be 98 ± 2 kJ mol⁻¹ and +56 ± 7 J K⁻¹ mol⁻¹ for 1-octene whilst, in the case of 1-hexyne these were found out to be 117 ± 7 kJ mol⁻¹ and +119 ± 24 J K⁻¹ mol⁻¹, respectively. When comparing the kinetic data between H₂BBr·SMe₂ and HBBr₂·SMe₂, the results showed that the rate of dissociation of Me₂S from H₂BBr·SMe₂ is on average 34 times faster than it is in the case of HBBr₂·SMe₂. Similarly, the rate of hydroboration with H₂BBr·SMe₂ was found to be on average 11 times faster than it is with HBBr₂·SMe₂. It is also clear that by replacing a hydrogen substituent with a bromine atom in the case of H₂BBr·SMe₂ the mechanism for the overall process changes from limiting dissociative (D) to interchange associative (I_a).