Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Synthesis and thermochemistry of MgO·3B2O3·3.5H2O

A new magnesium borate MgO·3B₂O₃·3.5H₂O has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₆O₉(OH)₂]·2.5H₂O. The enthalpy of solution of MgO·3B₂O₃·3.5H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5595.02±4.85) kJ mol⁻¹ of MgO·3B₂O₃3.5H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

New synthetic method and thermochemistry of szaibelyite

A new synthetic method of szaibelyite (2MgO·B₂O₃·H₂O) has been reported. The enthalpy of solution of 2MgO·B₂O₃·H₂O in 2.9842 mol dm⁻³ HCl (aq) was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in 2.9842 mol dm⁻³ HCl (aq) and of MgO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of MgO (s), H₃BO₃ (s), and H₂O (l), the standard molar enthalpy of formation of −(2884.36±1.82) kJ mol⁻¹ of 2MgO·B₂O₃·H₂O was obtained.     

Synthesis, characterization, and thermochemistry of a new form of 2MgO·3B2O3·17H2O

A new magnesium borate, β-2MgO·3B₂O₃·17H₂O, has been synthesized by the method of phase transformation of double salt and characterized by XRD, IR, and Raman spectroscopy as well as by TG. The structural formula of this compound was Mg[B₃O₃(OH)₅]·6H₂O. The enthalpy of solution of β-2MgO·3B₂O₃·17H₂O in approximately 1 mol dm⁻³ HCl was determined. With the incorporation of the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(10256.39±4.93) kJ mol⁻¹ of β-2MgO·3B₂O₃·17H₂O was obtained. Thermodynamic properties of this compound was also calculated by group contribution method.     

Standard molar enthalpies of formation of Ln(C9H6NO)2(C2H3O2) (Ln: Nd, Sm)

Using an on-line solution-reaction isoperibol calorimeter, the standard molar enthalpies of reaction for the general thermochemical reaction: LnCl₃·6H₂O(s) + 2C₉H₇NO(s) + CH₃COONa(s) = Ln(C₉H₆NO)₂(C₂H₃O₂)(s) + NaCl(s) + 2HCl(g) + 6H₂O(l) (Ln: Nd, Sm), were determined at T=298.15 K, as  kJ mol^−l, respectively. From the mentioned standard molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of Ln(C₉H₆NO)₂(C₂H₃O₂)(s) (Ln: Nd, Sm), at T=298.15 K, have been derived to be: −(1494.7±3.3) and −(1501.5±3.4) kJ mol^−l, respectively.     

Thermochemistry of dicesium calcium tetraborate octahydrate

The enthalpies of solution of Cs₂Ca[B₄O₅(OH)₄]₂·8H₂O(s) in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of CsCl(s) in aqueous (hydrochloric acid + boric acid + calcium oxide) were determined. From these results and the enthalpies of solution of H₃BO₃(s) in approximately 1 mol dm⁻³ HCl(aq) and of CaO(s) in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(10328 ± 6) kJ mol⁻¹ for Cs₂Ca[B₄O₅(OH)₄]₂·8H₂O(s) was obtained from the standard molar enthalpy of formation of CaO(s), CsCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of Cs₂Ca[B₄O₅(OH)₄]₂·8H₂O(s) was calculated from the thermodynamic relation with the standard molar Gibbs free energy of formation of Cs₂Ca[B₄O₅(OH)₄]₂·8H₂O(s) computed from a group contribution method.     

A solution-reaction isoperibol calorimeter and standard molar enthalpies of formation of Ln(hq)2Ac (Ln = La, Pr)

An on-line solution-reaction isoperibol calorimeter has been constructed. The performance of the apparatus was evaluated by measuring the molar enthalpy of solution of KCl in water at 298.15 K. The uncertainty and the inaccurary of the experimental results were within ±0.3% compared with the recommended reference data. Using the calorimeter, the molar enthalpies of reaction for the following two reactions: LaCl₃·7H₂O(s)+2Hhq(s)+NaAc(s)=La(hq)₂Ac(s)+NaCl(s)+2HCl(g)+7H₂O(l) and PrCl₃·6H₂O(s)+2Hhq(s)+NaAc(s)=Pr(hq)₂Ac(s)+NaCl(s)+2HCl(g)+6H₂O(l), were determined at T=298.15 K, as −(78.3±0.6) and −(97.3±0.5) kJ mol^−l, respectively. From the above molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of La(hq)₂Ac and Pr(hq)₂Ac, at T=298.15 K, have been derived to be −(1535.5±0.7) and −(1536.7±0.6) kJ mol^−l, respectively.     

Synthesis, characterization and standard molar enthalpy of formation of La(C7H5O3)2·(C9H6NO)

The product from reaction of lanthanum chloride seven-hydrate with salicylic acid and 8-hydroxyquinoline, La(C₇H₅O₃)₂·(C₉H₆NO), was characterized by IR, elemental analysis, molar conductance, and thermogravimetric analysis. The standard molar enthalpies of solution of [LaCl₃·7H₂O (s)], [2C₇H₆O₃ (s)], [C₉H₇NO (s)] and [La(C₇H₅O₃)₂·(C₉H₆NO) (s)] in a mixed solvent of absolute ethyl alcohol, dimethyl formamide (DMF) and perchloric acid were determined by calorimetry to be [LaCl₃·7H₂O (s), 298.15 K] = −96.45 ± 0.18 kJ mol⁻¹, [2C₇H₆O₃ (s), 298.15 K] = 14.99 ± 0.17 kJ mol⁻¹, [C₉H₇NO (s), 298.15 K] = −3.86 ± 0.06 kJ mol⁻¹ and [La(C₇H₅O₃)₂·(C₉H₆NO) (s), 298.15 K] = −117.78 ± 0.11 kJ mol⁻¹. The enthalpy change of the reaction

(1)     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Synthesis, characterization and thermochemistry of K2B5O8(OH)·2H2O

A pure hydrated potassium borate K₂B₅O₈(OH)·2H₂O has been synthesized under mild hydrothermal conditions and characterized by single-crystal X-ray diffraction, XRD, FT-IR, Raman spectra and DTA-TG. The crystal structure consists of two K-O polyhedra and [B₅O₈(OH)]²⁻ polyborate anion. The enthalpy of formation was determined to be −4772.6 ± 4.0 kJ mol⁻¹ by solution calorimetry.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Thermodynamic properties of the gaseous barium silicates BaSiO2 and BaSiO3

In the present study, the stability of gaseous barium silicates was confirmed by the high temperature mass spectrometry. On the basis of equilibrium constants measured for gas-phase reactions, the standard formation enthalpies were determined for gaseous barium silicates as (−510 ± 15) kJ · mol⁻¹ and (−884 ± 18) kJ · mol⁻¹ at 298 K; standard atomization enthalpies as (1637 ± 17) kJ · mol⁻¹ and (2318 ± 20) kJ · mol⁻¹ at 298 K for BaSiO₂ and BaSiO₃, respectively. Based on the results obtained the critical analysis of the literature data was carried out.     

Synthesis, heat capacity and enthalpy of formation of [Ho2(l-Glu)2(H2O)8](ClO4)4·H2O

A complex of holmium perchlorate coordinated with l-glutamic acid, [Ho₂(l-Glu)₂(H₂O)₈](ClO₄)₄·H₂O, was prepared with a purity of 98.96%. The compound was characterized by chemical, elemental and thermal analysis. Heat capacities of the compound were determined by automated adiabatic calorimetry from 78 to 370 K. The dehydration temperature is 350 K. The dehydration enthalpy and entropy are 16.34 kJ mol⁻¹ and 16.67 J K⁻¹ mol⁻¹, respectively. The standard enthalpy of formation is −6474.6 kJ mol⁻¹ from reaction calorimetry at 298.15 K.     

Thermodynamic studies on SrFe12O19(s), SrFe2O4(s), Sr2Fe2O5(s) and Sr3Fe2O6(s)

The citrate-nitrate gel combustion route was used to prepare SrFe₂O₄(s), Sr₂Fe₂O₅(s) and Sr₃Fe₂O₆(s) powders and the compounds were characterized by X-ray diffraction analysis. Different solid-state electrochemical cells were used for the measurement of emf as a function of temperature from 970 to 1151 K. The standard molar Gibbs energies of formation of these ternary oxides were calculated as a function of temperature from the emf data and are represented as (SrFe₂O₄, s, T)/kJ mol⁻¹ (±1.7)=−1494.8+0.3754 (T/K) (970?T/K?1151). (Sr₂Fe₂O₅, s, T)/kJ mol⁻¹ (±3.0)=−2119.3+0.4461 (T/K) (970?T/K?1149). (Sr₃Fe₂O₆, s, T)/kJ mol⁻¹ (±7.3)=−2719.8+0.4974 (T/K) (969?T/K?1150).Standard molar heat capacities of these ternary oxides were determined from 310 to 820 K using a heat flux type differential scanning calorimeter (DSC). Based on second law analysis and using the thermodynamic database FactSage software, thermodynamic functions such as Δ_fH°(298.15 K), S°(298.15 K) S°(T), C_p°(T), H°(T), {H°(T)-H°(298.15 K)}, G°(T), free energy function (fef), Δ_fH°(T) and Δ_fG°(T) for these ternary oxides were also calculated from 298 to 1000 K.     

Thermodynamics of BaNd2Fe2O7(s) and BaNdFeO4(s) in the system BaNdFeO

Two compounds, BaNd₂Fe₂O₇(s) and BaNdFeO₄(s) in the quaternary system BaNdFeO were prepared by citrate-nitrate gel combustion route and characterized by X-ray diffraction analysis. Heat capacities of these two oxides were measured in two different temperature ranges: (i) 130-325 K and (ii) 310-845 K, using a heat flux type differential scanning calorimeter. Two different types of solid-state electrochemical cells with CaF₂(s) as the solid electrolyte were employed to measure the e.m.f. as a function of temperature. The standard molar Gibbs energies of formation of these quaternary oxides were calculated as a function of temperature from the e.m.f. data. The standard molar enthalpies of formation from elements at 298.15 K, ΔfHm° (298.15 K) and the standard entropies, Sm° (298.15 K) of these oxides were calculated by the second law method. The values of ΔfHm° (298.15 K) and Sm° (298.15 K) obtained for BaNd₂Fe₂O₇(s) are: −2756.9 kJ mol⁻¹ and 234.0 J K⁻¹ mol⁻¹ whereas those for BaNdFeO₄(s) are: −2061.5 kJ mol⁻¹ and 91.6 J K⁻¹ mol⁻¹, respectively.     

Low-temperature heat-capacity and standard molar enthalpy of formation of copper l-threonate hydrate Cu(C4H6O5)·0.5H2O(s)

The solid copper l-threonate hydrate, Cu(C₄H₆O₅)·0.5H₂O, was synthesized by the reaction of l-threonic acid with copper dihydrocarbonate and characterized by means of chemical and elemental analyses, IR and TG-DTG. Low-temperature heat-capacity of the title compound has been precisely measured with a small sample precise automated adiabatic calorimeter over the temperature range from 77 to 390 K. An obvious process of the dehydration occurred in the temperature range between 353 and 370 K. The peak temperature of the dehydration of the compound has been observed to be 369.304 ± 0.208 K by means of the heat-capacity measurements. The molar enthalpy, Δ_dH_m, of the dehydration of the resulting compound was of 16.490 ± 0.063 kJ mol⁻¹. The experimental molar heat capacities of the solid from 77 to 353 K and the solid from 370 to 390 K have been, respectively, fitted to tow polynomial equations with the reduced temperatures by least square method. The constant-volume energy of combustion of the compound, Δ_cU_m, has been determined as being −1616.15 ± 0.72 kJ mol⁻¹ by an RBC-II precision rotating-bomb combustion calorimeter at 298.15 K. The standard molar enthalpy of formation of the compound, , has been calculated to be −1114.76 ± 0.81 kJ mol⁻¹ from the combination of the data of standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities.     

Studies on synthesis, characterization and thermochemistry of Mg2[B2O4(OH)2]·H2O

A new magnesium borate Mg₂[B₂O₄(OH)₂]·H₂O has been synthesized by the method of phase transformation of double salt at hydrothermal condition and characterized by XRD, IR, TG and DSC. The enthalpy of solution of Mg₂[B₂O₄(OH)₂]·H₂O in 0.9764 mol L^–1 HCl was determined. With the incorporation of the enthalpies of solution of H₃BO₃ in HCl (aq), of MgO in (HCl+H₃BO₃) (aq), and the standard molar enthalpies of formation of MgO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of –(3185.78±1.91) kJ mol^–1 of Mg₂[B₂O₄(OH)₂]·H₂O was obtained.This revised version was published online in November 2005 with corrections to the Cover Date.     

Syntheses and crystal structures of two new hydrated borates, Zn8[(BO3)3O2(OH)3] and Pb[B5O8(OH)]·1.5H2O

Two new hydrated borates, Zn₈[(BO₃)₃O₂(OH)₃] and Pb[B₅O₈(OH)]·1.5H₂O, have been prepared by hydrothermal reactions at 170 °C. Single-crystal X-ray structural analyses showed that Zn₈[(BO₃)₃O₂(OH)₃] crystallizes in a non-centrosymmetric space group R32 with a=8.006(2) Å, c=17.751(2) Å, Z=3 and Pb[B₅O₈(OH)]·1.5H₂O in a triclinic space group P1¯ with a=6.656(2) Å, b=6.714(2) Å, c=10.701(2) Å, α=99.07(2)°, β=93.67(2)°, γ=118.87(1)°, Z=2. Zn₈[(BO₃)₃O₂(OH)₃] represents a new structure type in which Zn-centered tetrahedra are connected via common vertices leading to helical ribbons _∞¹[Zn₈O₁₅(OH)₃]¹⁷⁻ that pack side by side and are further condensed through sharing oxygen atoms to form a three-dimensional _∞³[Zn₈O₁₁(OH)₃]⁹⁻ framework. The boron atoms are incorporated into the channels in the framework to complete the final structure. Pb[B₅O₈(OH)]·1.5H₂O is a layered compound containing double ring [B₅O₈(OH)]²⁻ building units that share exocyclic oxygen atoms to form a two-dimensional layer. Symmetry-center-related layers are stacked along the c-axis and held together by interlayer Pb²⁺ ions and water molecules via electrostatic and hydrogen bonding interactions. The IR spectra further confirmed the existence of both triangular BO₃ and OH groups in Zn₈[(BO₃)₃O₂(OH)₃], and BO₃, BO₄, OH groups as well as guest water molecules in Pb[B₅O₈(OH)]·1.5H₂O.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.