Studies on the ageing of a magnesium-strontium nitrate pyrotechnic composition using isothermal microcalorimetry and thermal analysis techniques

The ageing behaviour of a pyrotechnic composition containing equal parts by mass of magnesium and strontium nitrate has been followed by isothermal microcalorimetry. The measurements were carried out on the samples at 50 °C and 65% relative humidity in air using closed ampoules. The results have been compared to those obtained for magnesium powder under the same conditions. Following an initial induction period, the pyrotechnic compositions reacted at a much faster rate than magnesium powder alone. The main reaction products were found to be magnesium hydroxide and strontium nitrite; the amounts formed have been correlated with the cumulative heats of ageing. In addition, the influence of the ageing process on the pyrotechnic reaction has been studied by high temperature differential scanning calorimetry (DSC) and by modulated temperature DSC.     

Studies on the ageing of a magnesium-potassium nitrate pyrotechnic composition using isothermal heat flow calorimetry and thermal analysis techniques

The ageing behaviour of a pyrotechnic mixture of magnesium and potassium nitrate has been followed at 50 °C and 65% relative humidity by isothermal heat flow calorimetry. Measurements have been carried out with samples in air and in an inert atmosphere. The main reaction product was found to be magnesium hydroxide. This has been determined quantitatively by thermogravimetry and the amount formed correlated with the measured cumulative heat of ageing. The results have been compared with those obtained for magnesium powder studied under the same conditions. In addition the influence of the ageing process on the pyrotechnic reaction has been studied by high temperature differential scanning calorimetry under ignition conditions and modulated temperature differential scanning calorimetry.     

基于量子点增敏化学发光同时测定尿液中的亚硝酸盐和硝酸盐

采用铜镉柱还原硝酸盐,与CdTe量子点增敏过氧亚硝酸-碳酸钠体系的化学发光信号相结合,开发了快速在线同时分析亚硝酸盐和硝酸盐的新方法.对流动注射、化学发光等实验参数条件进行优化,在Na2CO3的浓度为0.2 M、H2O2的浓度为0.03 M、Na2EDTA的浓度为1×10-3 M、CdTe量子点粒径为2.84 nm的条件下,过氧亚硝酸-碳酸钠体系可以获得最优的化学发光信号.该方法检测亚硝酸盐的线性范围为0.3~75μM,检测限可达0.12μM,其相对标准偏差为1.9%;硝酸盐的线性范围为1.0~100μM,检测限可达0.26μM,其相对标准偏差为1.5%.此方法无需衍生和分离,可以实现同时、准确、快速和高选择性地检测人体尿液中亚硝酸盐和硝酸盐的含量,回收率分别为94%~105%和96.6%~110.4%.     

Design of a field flow system for the on-line spectrophotometric determination of phosphate, nitrite and nitrate in natural water and wastewater

This study describes the design and optimisation of a field flow system for the in-situ collection and on-line determination of phosphate, nitrate and nitrite by flow injection analysis-spectrophotometry. The method is based on the initial determination of phosphate as its phosphoantimonylmolybdenum blue complex which is then oxidized on-line by nitrite and the decrease in absorbance is monitored at 880 nm. Nitrate is determined as the difference between total and initial nitrite content in a separate flow after reduction to nitrite in a cadmium reductive column. The calibration curves were linear in the range 0–2.00 mg L⁻¹ P-phosphate, 0–10.00 mg L⁻¹ nitrite and 0–7.00 mg L⁻¹ nitrate with correlation coefficients of 0.9979, 0.9993 and 0.9995, respectively. The detection limits, calculated as 3S/N, were 0.15 mg L⁻¹ for P-phosphate, 0.17 mg L⁻¹ for nitrite and 0.09 mg L⁻¹ for nitrate. The reproducibility was below 3.0% (n = 7). Method validation in the analysis of natural water and wastewater samples revealed that it can efficiently be applied to the determination of the target analytes, with recoveries in the range of 92–108%. Correspondence: Athanasios G. Vlessidis, Laboratory of Analytical Chemistry, Department of Chemistry, University of Ioannina, Ioannina 45110, Greece     

A simple isocratic LC method for quantification of trace-level inorganic degradation impurities (ferricyanide,ferrocyanide, nitrite,and nitrate) in sodium nitroprusside injection and robustness by quality using design approach

This study developed and validated a trace-level quantification inorganic impurities method using reversed-phase HPLC and performed the robustness check using quality-by-design approach by varying the multiple factors simultaneously. This method is economical and simple and exhibits its stability-indicating nature [for the determination of ferrocyanide ([Fe(CN)₆]^4–), ferricyanide ([Fe(CN)₆]³⁻), nitrate (NO₃^–), and nitrite (NO₂^–)] in sodium nitroprusside (SNP) drug substance and liquid dosage form. Chromatographic separation was achieved using a USP L43 column (ACE PFP, 150 × 4.6 mm, 3 μm) with a simple isocratic elution. The buffer consists of potassium dihydrogen phosphate (50 mM), tetrabutylammonium hydrogen sulfate (9 mM), and tetrabutylammonium hydroxide (25 mM). The buffer pH was adjusted to 7.2 with tetrabutylammonium hydroxide. The mobile phase was mixed with the buffer and acetonitrile (68:32 v/v). The flow rate was 0.8 mL/min, column temperature was maintained at 30°C, and injection volume was 5.0 μL. The SNP impurities were monitored at 225 nm using a UV detector. Further, the method was validated per the International Council for Harmonisation (ICH) guidelines, and forced degradation studies were carried out under different stress conditions. The detector responses were plotted against concentrations, and correlation was linear (r > 0.999) over the range of 0.8–7.5 μg/mL for ferricyanide; 1.0–37.5 μg/mL for SNP; and 0.2–7.5 μg/mL for ferrocyanide, nitrite, and nitrate. The method repeatability was established for all the impurities with relative standard deviation (%), and the results were found to be less than 2.0.     

Chemometric approach to the optimisation of LC-FL and GC-MS methods for the determination of nitrite and nitrate in some biological,food and environmental samples

Gas chromatography–mass spectrometry (GC-MS) method and a liquid chromatography–fluorescence (LC-FL) detection method using experimental design and optimisation approach were improved for the quantitative determination of nitrite and nitrate in biological, food and environmental samples. The obtained recoveries of nitrite and nitrate ions from samples based on both GC-MS and LC-FL results ranged from 98.5% to 98.9% for nitrite and 97.9% to 98.4% for nitrate. The precision of these methods, as indicated by the relative standard deviations (RSDs), was within the range from 2.4% to 3.6% for nitrite and 2.5% to 3.8% for nitrate, respectively. The limits of detection of nitrite and nitrate ions from samples based on GC-MS and LC-FL results ranged from 0.01 to 0.14 ng L^?1 for nitrite and 0.02 to 0.71 ng L^?1 for nitrate, respectively. The optimised isolation procedure by central composite design was successfully applied to real samples. The results revealed that the proposed procedure combined with GC-MS and LC-FL techniques is more sensitive, reliable and selective compared to the other methods available for the precise determination of trace levels of nitrite and nitrate in biological, food and environmental samples.     

An analysis of the thermal aging behaviour in high-performance energetic composites through the glass transition temperature

Differential scanning calorimetry (DSC) was used to analyze the thermal aging behaviour in energetic composite materials where a hydroxyl-terminated polybutadiene (HTPB)/isophorone diisocyanate elastomer is the polymeric matrix. Different parameters from the analysis of the glass transition, such as the glass transition temperature (T_g), were used in order to monitor this isothermal aging at 65 °C during a total time of 3000 h, finding an increasing and broadening T_g. In addition, the accelerated aging behaviour of these materials was also studied by a classical method, based on the change of mechanical properties such as those of Young's modulus or strain at break. The correlation between both methodologies was examined, demonstrating that an analytical technique such as DSC allows the evaluation of the actual state of composite solid propellants with a small sample and a straightforward measurement.     

Simple flow-injection system for the simultaneous determination of nitrite and nitrate in water samples

A novel spectrophotometric reaction system was developed for the determination of nitrite as well as nitrate in water samples, and was applied to a flow-injection analysis (FIA). The spectrophotometric flow-injection system coupled with a copperised cadmium reductor column was proposed. The detection was based on the nitrosation reaction between nitrite ion and phloroglucinol (1,3,5-trihydroxybenzene), a commercially available phenolic compound. Sample injected into a carrier stream was split into two streams at the Y-shaped connector. One of the streams merged directly and reacted with the reagent stream: nitrite ion in the samples was detected. The other stream was passed through the copperised cadmium reductor column, where the reduction of nitrate to nitrite occurred, and the sample zone was then mixed with the reagent stream and passed through the detector: the sum of nitrate and nitrite was detected. The optimised conditions allow a linear calibration range of 0.03–0.30 μg NO₂⁻-N ml⁻¹ and 0.10–1.00 μg NO₃⁻-N ml⁻¹. The detection limits for nitrite and nitrate, defined as three times the standard deviation of measured blanks are 2.9 ng NO₂⁻-N ml⁻¹ and 2.3 ng NO₃⁻-N ml⁻¹, respectively. Up to 20 samples can be analyzed per hour with a relative standard deviation of less than 1.5%. The proposed method could be applied successfully to the simultaneous determination of nitrite and nitrate in water samples.     

An investigation on characterization and thermal analysis of the Aughinish red mud

Summary Red mud is insoluble, fine-grained waste residue which is generated as a by product during the production of alumina from the Bayer process. In this article, the thermal behavior of Aughinish red mud was investigated using thermal gravimetric analysis (TG) and differential thermal analysis (DTA). For identification of oxide and mineral phases in the red mud sample, XRD method, scanning electron microscopy (SEM), EDAX were used. Iron (30.4%), aluminium (23.6%) and titanium (17.85%) oxides are major oxides in the sample. Two endothermic peaks were shown on DTA curve. The total mass loss in the red mud was found to be 10.1%, which was associated with moisture and water molecules in gibbsite and boehmite phases.     

The role of anhydrous zinc nitrate in the thermal decomposition of the zinc hydroxy nitrates Zn5(OH)8(NO3)2·2H2O and ZnOHNO3·H2O

The steps associated with the thermal decomposition of Zn₅(OH)₈(NO₃)₂·2H₂O and ZnOHNO₃·H₂O are re-examined. Previous reports have suggested that Zn₅(OH)₈(NO₃)₂·2H₂O decomposes to ZnO via two intermediates, Zn₅(OH)₈(NO₃)₂ and Zn₃(OH)₄(NO₃)₂ whereas ZnOHNO₃·H₂O has been reported to decompose to ZnO via a Zn₃(OH)₄(NO₃)₂ intermediate. In this study, we demonstrate using TG, mass spectral analysis of evolved gases and in situ variable temperature powder X-ray diffraction analysis that, in fact, in the decomposition of Zn₅(OH)₈(NO₃)₂·2H₂O an anhydrous zinc nitrate intermediate is also involved. We, additionally, show that the decomposition of ZnOHNO₃·H₂O to ZnO also involves the formation of an anhydrous zinc nitrate intermediate. The anhydrous zinc nitrate formed in both cases is poorly crystallised and this observation may explain why this phase could not be observed by PXRD analysis in the previous studies.     

An investigation of the accelerated thermal degradation of different epoxy resin composites using X-ray microcomputed tomography and optical coherence tomography

Epoxy resin composites reinforced with hollow glass microspheres, microlight microspheres, 3D parabeam glass, and E-Glass individually were subjected to accelerated thermal degradation conditions. X-ray microcomputed tomography (XμCT) was used to evaluate density changes, reinforcement filler damage, homogeneity, cracks and microcracks in the bulk of the different epoxy resin composites. XμCT 3D images, 2D reconstructed images and voids calculations revealed microspheres damage, filler distributions and showed cracks in all composites with different shapes and volume in response to the thermal degradation conditions. In addition, expansion of air bubbles/voids was observed and recorded in the microsphere and microlight epoxy composite samples. In a complementary way, optical coherence tomography (OCT) was used as a novel optical characterisation technique to study structural changes of the surface and near-surface regions of the composites, uncovering signs of surface shrinkage caused by the thermal treatment. Thus, combining XμCT and OCT proved useful in examining epoxy resin composites' structure, filler-resin interface and surface characteristics.     

Computational analysis of some possible initial steps in the unimolecular thermal decompositions of 1,3-diazacyclobutane and its 1,3-dinitramine derivative

Summary We have investigated some possible initial steps in the unimolecular thermal decompositions of 1,3-diazacyclobutane and its 1,3-dinitramine derivative, the latter being selected as the simplest example of a symmetric cyclic nitramine. Vibrational analyses were used to identify normal modes that, in the extreme limits, would correspond to bond rupture and molecular decomposition. The energy requirements for ring fragmentation and N-N bond-breaking were computed at the MP4/6-31G level, using SCF 3-21G optimized structures. It was concluded that ring-fragmentation is a probable initiating step in the decomposition of the unsubstituted molecule, and that it is roughly competitive with N-N bond scission for the dinitramine. The nitronitrite rearrangement is predicted, on the basis of SCF calculations, to be less likely than either of the other two processes. It is proposed that N-N bond-breaking may be of primary importance for nitramine stability, but that energetic performance may be determined more by decomposition pathways having energy barriers.     

Reversed-phase liquid chromatography/electrospray ionization/mass spectrometry with isotope dilution for the analysis of nitrate and nitrite in water

A new method was developed for the analysis of nitrate and nitrite in a variety of water matrices by using reversed-phase liquid chromatography/electrospray ionization/mass spectrometry in the negative ion mode. For this direct analysis method, nitrate and nitrite anions were well separated under the optimized LC conditions, detected by monitoring m/z 62 and m/z 46 ions, and quantitated by using an isotope dilution technique that utilized the isotopically labeled analogs. The method sensitivity, accuracy, and precision were investigated, along with matrix effects resulting from common inorganic matrix anions. The isotope dilution technique, along with sample pretreatment using barium, silver, and hydrogen cartridges, effectively compensated for the ionization suppression caused by the major water matrix anions, including chloride, sulfate, phosphate, and carbonate. The method detection limits, based on seven reagent water replicates fortified at 0.01 mg N/L nitrate and 0.1 mg N/L nitrite, were 0.001 mg N/L for nitrate and 0.012-0.014 mg N/L for nitrite. The mean recoveries from the replicate fortified reagent water and lab water samples containing the major water matrix anions, were 92-103% for nitrate with an imprecision (relative standard deviation, RSD) of 0.4-2.1% and 92-110% for nitrite with an RSD of 1.1-4.4%. For the analysis of nitrate and nitrite in drinking water, surface water, and groundwater samples, the obtained results were generally consistent with those obtained from the reference methods. The mean recoveries from the replicate matrix spikes were 92-123% for nitrate with an RSD of 0.6-7.7% and 105-113% for nitrite with an RSD of 0.3-1.8%.     

Chemical and thermal analysis of the biopolymers in thyme (Thymus vulgaris)

Thyme (Thymus vulgaris) has been known, long time ago, for its aromatic properties. It contains essential oils and polymers such as cellulose (mixture of hemicellulose and cellulose) and lignin. The thyme, studied in this work, was gathered from the same place, in the period from November 1999 to October 2000. The chemical analysis (water, total ash, essential oils, extractive substances, cellulose, holocellulose and lignin) can be used roughly in the characterisation of the four periods that correspond to the four seasons of the year. The cellulose level was found to be more than lignin level in the wet periods (growth of the plant). The opposite was found in the dry periods. The total ash and essential oil levels were found to be high during the period of high pluviometry. The thermal decomposition of cellulose and holocellulose was found to fit well with the first-order kinetics. The activation energy, under air flow, was 185 and 196 kJ mol⁻¹ for cellulose and holocellulose, respectively. The maximum decomposition rate and thermal analysis heating rate of lignin were found to have a direct linear relationship.     

Scanning thermal microscopy techniques for polymeric thin films using temperature contrast mode to measure thermal diffusivity and a novel approach in conductivity contrast mode to the mapping of thermally conductive particles

Advances in production are leading to increasing use of polymeric thin films in applications such as automotive bearings. Two approaches have been developed to study the thermophysical properties of these thin films: The first technique based on Flash theory uses a scanning thermal microscopy (SThM) tip in temperature contrast mode to measure thermal diffusivity over a nano-scale area. The SThM tip is in contact with the upper surface of the film to detect a heat pulse delivered by a microelectromechanical heater platform from the lower surface. The second technique is a conductivity contrast mode SThM based approach for measuring the size and distribution of thermally conducting particles in thin film polymeric coatings. Topographical and thermal conductivity data are combined to produce a “correlation analysis value” 3D particle map of the coating. Good practice and a case study are highlighted.     

Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decomposition kinetics

The disposal stage of polylactide (PLA) was assessed by burying it in active soil following an international standard. Degradation in soil promotes physical and chemical changes in the polylactide properties. The characterization of the extent of degradation underwent by PLA was carried out by using Thermal Analysis techniques. In this paper, studies on the thermal stability and the thermal decomposition kinetics were performed in order to assess the degradation process of a commercial PLA submitted to an accelerated soil burial test by means of multi-linear-non-isothermal thermogravimetric analyses. Results have been correlated to changes in molecular weight, showing the same evolution as that described by the parameters of thermal stability temperatures and apparent activation energies. The decomposition reactions can be described by two competitive different mechanisms: Nucleation model (A2) and Reaction Contracting Volume model (R3). The changes in the kinetic parameters and kinetic models are in agreement with the calorimetric and dynamic-mechanical-thermal results, presented in the Part I of the study [1].     

Contribution of size exclusion chromatography and thermal analysis methods in the study of the radiochemical behavior of plastic materials

Sterilization by irradiation techniques is considered to be an improved method to treat polluted products of human consumption. Secondary effects, that may be generated in the components of packaging materials, could induce organoleptic damage and some physico-chemical modifications, observed especially in plastic materials. In order to demonstrate any such secondary changes, we have investigated the effects of beta-irradiation (a treatment which could induce either a reticulation or a cleavage in a polymeric sequence) on three polymers; namely, low density polyethylene, polystyrene and polyvinyl chloride. The techniques used to identify irradiation-induced modifications of these polymers were size exclusion chromatography and thermal analysis. Thermal analysis showed a decrease in the percentage of crystallinity of polyethylene after its radiosterilization. Exclusion chromatography highlighted a reticulation for irradiated polyvinyl chloride and polystyrene.     

Non-isothermal kinetic analysis of the thermal denaturation of type I collagen in solution using isoconversional and multivariate non-linear regression methods

To further understand the kinetics of the thermal denaturation of type I collagen, the 16 and 8 mg/mL bovine hide collagen solutions were studied by differential scanning calorimetry at different heating rates. The activation energy of the denaturation process was examined utilizing the differential (Friedman) and the integral (Ozawa-Flynn-Wall) isoconversional methods, and several kinetic models were evaluated using the method of multivariate non-linear regression. Besides, the denaturation behavior was simulated under different temperature conditions. Results showed that the activation energy decreased in a different way at lower and higher degrees of conversion, respectively. A three-state model, in which a reversible step was followed by an irreversible one, was the best of the estimated models to describe the denaturation process, which could be approximated by single-step or two-consecutive-step in terms of temperature conditions.     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

A novel spectrofluorimetric method for the ultra trace analysis of nitrite and nitrate in aqueous medium and its application to air, water, soil and forensic samples

A highly sensitive and virtually specific method has been developed for the trace and ultra trace 5 ng ml⁻¹-1 μg ml⁻¹ fluorimetric analysis of nitrite. The method is based on the quenching action of nitrite on the native fluorescence of murexide (ammonium purpurate) [λ_ex=349.0 nm, λ_em=444.5 nm] in the acid range of 0.045-0.315 (M) H₂SO₄. The method is very precise and accurate (S.D.=±0.4877 and R.S.D.=0.4878% for the determination of 0.1 μg ml⁻¹ of nitrite in 11 replicates). Relatively large excesses of over 35 cations and anions do not interfere. The proposed technique has been successfully applied for the determination of nitrite and nitrate in ground water, surface water and sea water, nitrite in soil and nitrate in forensic samples. The method has also been extended for the analysis of NO_x in air.