Microwave absorption in high-Tc superconductors studied by the EPR method

Dependences of the microwave absorption on temperature, magnetic field and microwave power obtained for the high-T _c superconductors are presented. Shape of the magnetically modulated microwave absorption, low-field phase diagram and overheating of the Josephson junction system induced by microwave irradiation are discussed. The model of the Josephson junction system interacting with microwaves has been used to explain the behavior of the high-T _c superconductors in low magnetic field.     

Temperature dependence of the low field microwave absorption of high Tc superconductors

For YBa₂Cu₃O_7−x samples the temperature dependences of the low field microwave absorption spectra as well as of the magnetization curves are investigated and discussed. Combination of these data shows that strong microwave absorption can be observed under conditions excluding the possibility of flux trapping by the sample.     

Microwave absorption spectra and the problem of the crystal field in tetragonal compounds HoBa2Cu3O x (x = 6.0, 6.3)

The resonance microwave absorption at wavelengths 871, 406, 305, and 118 μm in tetragonal layered perovskites HoBa₂Cu₃O _x (x = 6.0, 6.3) in pulsed magnetic fields up to 40 T has been detected. This absorption is caused by the electronic transitions between low lying levels of the Ho³⁺ ion in the crystal field. The positions and intensities of the basic resonance absorption lines for the crystal with x = 6.0 in the magnetic field oriented along the tetragonal axes are adequately described in terms of the tetragonal crystal field with known interaction parameters. To explain the weaker absorption lines, it is necessary to take into account the effect of the inhomogeneous orthorhombic and monoclinic components of the crystal field, which are due to disorder in the oxygen subsystem. This effect is more pronounced in the absorption spectra of the crystal with x = 6.3 for which the oxygen disorder is more pronounced.     

On the mechanism of electromagnetic microwave absorption in superfluid helium

In experiments on electromagnetic (EM) wave absorption in the microwave range in superfluid (SF) helium [1?C3], a narrow EM field absorption line with a width on the order of (20?C200) kHz was observed against the background of a wide absorption band with a width of 30?C40 GHz at frequencies f ₀ ?? 110?C180 GHz corresponding to the roton gap energy ?? _r (T) in the temperature range 1.4?C2.2 K. Using the so-called flexoelectric mechanism of polarization of helium atoms (⁴He) in the presence of density gradients in SF helium (HeII), we show that nonresonance microwave absorption in the frequency range 170?C200 GHz can be due to the existence of time-varying local density gradients produced by roton excitations in the bulk HeII. The absorption bandwidth is determined by the roton-roton scattering time in an equilibrium Boltzmann gas of rotons, which is t _r-r ?? 3.4 × 10^?11 s at T = 1.4 K and decreases upon heating. We propose that the anomalously narrow microwave resonance absorption line in HeII at the roton frequency f ₀(T) = ??r(T)/2??? appears due to the following two factors: (i) the discrete structure of the spectrum of the surface EM resonator modes in the form of a periodic sequence of narrow peaks and (ii) the presence of a stationary dipole layer in HeII near the resonator surface, which forms due to polarization of ⁴He atoms under the action of the density gradient associated with the vanishing of the density of the SF component at the solid wall. For this reason, the relaxation of nonequilibrium rotons generated in such a surface dipole layer is strongly suppressed, and the shape and width of the microwave resonance absorption line are determined by the roton density of states, which has a sharp peak at the edge of the roton gap in the case of weak dissipation. The effective dipole moments of rotons in the dipole layer can be directed either along or across the normal to the resonator surface, which explains the experimentally observed symmetric doublet splitting of the resonance absorption line in an external dc electric field perpendicular to the resonator surface. We show that negative absorption (induced emission) of EM field quanta observed after triggering a Kapitza ??heat gun?? occurs when the occupation numbers for roton states due to ??pumping?? of rotons exceed the occupation numbers of EM field photons in the resonator.     

Remanent microwave absorptin in Y−Ba−Cu−O at low magnetic fields

Polycrystalline samples of YBa₂Cu₃O₇ were studied by the microwave absorption technique at the low magnetic fields in the temperature range from 5 to 80 K. The direct microwave absorption and the field modulated microwave absorption were measured at 77 K. Analysis of the microwave absorption curves indicates that the field penetration into the sample starts from the lowest values of applied magnetic field within the whole temperature range.     

Microwave absorption studies of MgB2 superconductor

Microwave absorption studies have been carried out on MgB₂ superconductor using a standard X-band EPR spectrometer. The modulated low-field microwave absorption signals recorded for polycrystalline (grain size ∼ 10 μm) samples suggested the absence of weak-link character. The field dependent direct microwave absorption has been found to obey a ✓H dependence with two different slopes, which indicated a transition from strongly pinned lattice to flux flow regime.     

The microwave absorption properties of La0.8Sr0.2Mn1−yFeyO3 nanocrystalline powders in the frequency range 2-18 GHz

La_1−xSr_xMn_1−yFe_yO₃ nanocrystalline powders were prepared by the sol-gel method as a microwave absorption material. The reflectance, the dielectric loss tan δ_e and the magnetic loss tan δ_m of the samples were calculated according to the data of electromagnetism parameters measured by a microwave vector network analyzer in the frequency range 2-18 GHz. The dielectric loss tan δ_e and the magnetic loss tan δ_m had a step-change at a certain frequency so that the superiority of dielectric loss change into the superiority of magnetic loss, which indicated that anti-ferromagnetic clusters in the material change into ferromagnetic clusters by absorbing quantum of microwave electromagnetic field when the frequency of incident microwave reaches a certain value. The effective absorption bandwidth higher than 10 dB reached 6.2 GHz. As a result, the La_0.8Sr_0.2Mn_1−yFe_yO₃ has shown useful applications as a microwave absorption material.     

A superior microwave absorption material: Ni2+-Zr4+ Co-Doped barium ferrite ceramics with large reflection loss and broad bandwidth

Large reflection loss and wide bandwidth are significant targets, determining the microwave absorption ability. However, it is still a challenge to simultaneously satisfy the two conditions. As a multifunctional material, BaFe₁₂O₁₉ possess excellent electromagnetic properties in the microwave frequency band. Due to the natural resonance phenomenon of the material, BaFe₁₂O₁₉ can produce a large magnetic loss which correlates with Fe³⁺ content, and the microwave absorption characteristics of barium ferrite can be modulated by ion doping. As a typical magnetic metal, Ni coupled with high-valence state Zr⁴⁺ doping helps to produce double resonance peaks. In this work, Ni²⁺-Zr⁴⁺ co-doping M-type barium ferrites (BaFe_12-2xNi_xZr_xO₁₉, BNZFO-x, x = 0–0.8) were prepared conveniently by solid-state reaction method. Several necessary measurements to characterize its microwave absorption property have been operated such as morphology, magnetic performance and electromagnetic parameters. The results show that reflection loss and bandwidth can be simply tuned by tailoring Ni²⁺-Zr⁴⁺ content. The reflection loss peak drifts from 18 GHz to 9.76 GHz, which involves a half of the studied frequency range. The maximum reflection loss achieves −60.6 dB and the corresponding bandwidth over −10 dB is 7.68 GHz for BNZFO-0.6 ceramic with only 2.1 mm thickness. Thus, the doping of Ni²⁺-Zr⁴⁺ ion pairs is beneficial to improve the absorbing properties of the material, and the superior microwave absorption property may originate from its inner double natural resonance in micro-scale. The excellent microwave absorption properties suggest that BNZFO-x is a promising candidate applied for designing electromagnetic shielding devices.     

Microwave absorption properties of Al- and Cr-substituted M-type barium hexaferrite

Aluminum- and chromium-substituted barium ferrite particles with single magnetic domain were prepared using self-propagating combustion method. The crystalline structure, size, coercivity and microwave absorption property of the particles were investigated by means of X-ray diffraction, transmission electron microscopy, vibrating sample magnetometry and vector network analyzer. The results show that the crystalline structure of BaFe_12−xAl_xO₁₉ is still hexagonal. But when the chromium substitution amount y exceeds 0.6, the extra chromium ions cannot enter the lattice of BaFe_12−yCr_yO₁₉. After Fe³⁺ is partly substituted with Al³⁺ and Cr³⁺, the microwave absorption properties of barium ferrite are improved. The maximum absorption reaches 34.76 dB. The ferromagnetic resonance is an important channel of barium ferrite to absorb microwaves with high frequency. Aluminum and chromium substitutions change the ferromagnetic resonant frequency of barium ferrite. The multipeak phenomenon of the ferromagnetic resonance increases the microwave absorption capability of barium ferrite.     

Magnetic resonance spectrum of a two-phase state in single crystals of La0.7Pb0.3MnO3 lanthanum manganite

Two absorption lines are observed over a wide temperature range below T _c in the magnetic resonance spectrum of an La_0.7Pb_0.3MnO₃ single crystal. These lines correspond to two magnetic phases in the sample. The frequency-field dependence of spectra obtained in the range of microwave radiation frequencies 10–77 GHz allows these phases to be interpreted as ferromagnetic and paramagnetic phases. The phase volume ratio depends on the temperature and the magnitude of the external magnetic field. Features in the temperature behavior of parameters of the magnetic absorption line are observed in the region of the highest magnetic resistance of the sample. The results are interpreted within the mechanism of electronic phase separation.     

Microstructure and electromagnetic characteristics of BaTiO3/Ni hybrid particles prepared by electroless plating

To improve the microwave absorption ability, hybrid particles containing both dielectric loss of BaTiO₃ and magnetic loss of Ni were fabricated via electroless Ni plating on BaTiO₃ particles. A continuous Ni coating was successfully covered on the surface of the BaTiO₃. The effect of the Ni content on complex permittivity, complex permeability, and microwave absorption properties of BaTiO₃/Ni hybrid particles was investigated. The real (?′) and imaginary (?″) parts of complex permittivity as well as imaginary part of complex permeability (μ″) were found to increase with an increase in Ni content, while the variation of the real part of complex permeability (μ′) with Ni content was non-linear. The microwave absorption performances could readily be tuned base on the changing Ni content of the hybrid particles. The optimal absorption performances were attained when the content of Ni reached 38.9 wt% in hybrid particles.     

Yafet-Kittel-type magnetic ordering in Ni0.35Zn0.65Fe2O4 ferrite detected by magnetosensitive microwave absorption measurements

Magnetosensitive microwave absorption measurements of polycrystalline ferrite Ni_0.35Zn_0.65Fe₂O₄ was carried out at 9.4 GHz (X-band) as a function of temperature. Temperature dependence of the total linewidth (ΔH_pp) deduced from the resonance spectra showed the passage through the Curie point (T_c~430 K). Additionally, the plot ΔH_pp vs. T also indicated the existence of another magnetic phase transition at ~240 K, which can be associated with a Yafet-Kittel-type canting of the magnetic moments. Low-field microwave absorption (LFMA) and the magnetically modulated microwave absorption spectroscopy (MAMMAS) were used to give a further knowledge on this material. For low temperature, these techniques give evidence of a Yafet-Kittel-type canting of the magnetic moments.     

Microwave studies of Bi(2212) HTSC single crystals at nitrogen temperatures

Absorption of microwave power by single-phase Bi(2212) crystals with a broad (15 K) phase transition has been studied. A temperature-localized drop of microwave power absorption at the beginning of the superconducting transition at 80 K has been established. A possible mechanism of this absorption feature based on the concept of synchronization of Josephson junctions near T _c is discussed.     

Microwave magnetoresistance and electron spin resonance in Ge:Mn thin films and nanowires

Resonant and nonresonant absorption of microwave radiation is found to occur in germanium films implanted with manganese at concentrations of 2, 4, and 8 at %. Electron spin resonance is observed in two temperature ranges: (i) in the vicinity of the phase transition of Mn₅Ge₃ clusters to the ferromagnetic state at T = 295 K; and (ii) in the range of temperatures below 60 K, at which collective ordering of Mn spins in the crystal lattice and spin-wave resonance take place. The dependence of the nonresonant signal of the microwave magnetoresistance on the magnetic field exhibits a nonmonotonic behavior identical for the X and K microwave bands. An analysis of the field dependence of the microwave magnetoresistance makes it possible to separate two components of the derivative of the magnetoresistance: the quasi-linear Lorentzian component observed in strong fields and the negative exponential anisotropic component determined by spin-dependent scattering of charge carriers from magnetic impurities. The length of the phase relaxation of charge carriers is estimated to be 350 nm at T = 2 K and exceeds the thickness of the film (120 nm) and the sizes of clusters and precipitates (3–5 nm). In quasi-one-dimensional nanowires of the composition Ge:Mn at the same impurity concentrations, microwave magnetoresistance is absent. These facts suggest that conduction in thin films has a quasi-two-dimensional character and that the measured microwave magnetoresistance is associated with charge carriers in the crystal lattice rather than with impurity clusters.     

Effect of illumination on magnetization and microwave absorption of La1−xCaxMnO3 (x<0.2) films

Light-induced changes of the hysteresis loops of magnetization and microwave absorption are investigated in low-doped La_1−xCa_xMnO₃ (x<0.2) thin films. The width of the hysteresis loops decreases clearly under illumination with visible or near-infrared light at temperatures below 50 K. The microwave conductivity has a minimum value at magnetic fields corresponding to the magnetization reversal and is shifted towards weaker fields under illumination. These effects show complex nonexponential time evolution and dependence on strength of the magnetic field. The results can be explained by assuming that small ferromagnetic metallic regions exist within the insulating ferromagnetic phase of the sample, and that these regions are expanded by optically induced charge transfer between Jahn–Teller split e_g states of neighboring Mn³⁺ ions. Decrease of the Mn³⁺ XPS core level spectrum is observed in the samples under illumination with a HeNe laser.     

Application of magnetically modulated microwave absorption to study of giant magnetoresistance effect in the Ni−Fe/Cu multilayer system

Magnetically modulated microwave absorption (MMMA), magnetic hysteresisM(H), giant magnetoresistance (GMR) and ferromagnetic resonance (FMR) have been examined in the antiferro-magnetically coupled Py/Cu (Py=Ni₈₃Fe₁₇, permalloy) multilayer system. The correlation between results obtained by the MMMA technique, the standard GMR measurements, and magnetization reversal studies is shown. Microwave studies of GMR, magnetization reversal, and FMR for different orientations of the magnetic field with respect to the sample surface are presented.     

Low-field microwave magnetoabsorption in the cuprate superconductors

We review results on the low-field microwave magnetoabsorption (LFMMA) in granular samples of YBCO and BSCCO. First, we show that the virgin response (increase in absorption on first application ofH) obeys a universal form (ΔP/α)=(1+H ₀/H)^?1. Interpreting this in conjunction with de magnetization isotherms on the same samples, we demonstrate that the data support a model in which the LFMMA arises from field dependent reduction in the critical currents of the weak links in the sample surface. Next, we present examples of the variety of hysteresis loops obtained on subsequent field cycling and interpret them in terms of the universal form provided thatH is replaced by an effective valueH _eff. Attempts are made to delineate the various terms appearing inH _eff.     

Mechanisms of direct microwave absorption in Y1Ba2Cu3O7−x

Direct microwave absorption was studied as a function of magnetic field up to 8 kG and in a temperature range between 10 K and 150 K in Y₁Ba₂Cu₃O_7−x. Large microwave absorption was observed below T_c over a wide magnetic field range. The microwave power absorption is approximately described by I=A(T) H+C(T), where A(T) and C(T) are temperature dependent constants. A(T) is proportional to the square root of the microwave power, while C(T) shows a different behaviour. We propose different origins for A(T) and C(T), namely fluxons in grains and weak Josephson links. Moreover, also flux trapping was observed in the superconducting state. Possible mechanisms for the absorption are discussed.     

Microwave and electrical properties of Co-Ti substituted M-type Ba hexagonal ferrite

The microwave characteristics of Co²⁺ and Ti⁴⁺ ions substituted, BaCo _x Ti _x Fe_(12?2x)O₁₉ (x = 0.1, 0.3, 0.5, 0.7, 0.9) ferrite have been studied as a function of thickness, frequency and substitution. The results depict reflection loss of ? 31.94 dB at 10.47 GHz in x = 0.9. The highest static electrical current is observed at lower substitution. The model accompanying microwave absorption is used to evaluate microwave absorption characteristics. The electromagnetic and static electrical characteristics are improved with the substitution of Co²⁺ and Ti⁴⁺ ions. The compositions for possible electromagnetic applications are also explored.     

Microwave characterization of Pb<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>O<Subscript>3</Subscript> multiferroics at X-band

The microwave characteristics of Pb_1?x Ca _x Fe_0.5Nb_0.5O₃ multiferroics (x = 0.0, 0.4, 0.45, 0.5, 0.55, 0.6), have been investigated as a function of frequency and substitution. The results depict ?13.99 dB reflection loss at 11.65 GHz in composition x = 0.6. Microwave absorption is enhanced with substitution of Ca²⁺ ions and undoped composition 0.0 behaves as electromagnetic shield. The model governing microwave absorption is discussed and different compositions for electromagnetic applications have been suggested.