Synthesis and characterization of certain aromatic polyfumaramides

Ten polyfumaramides based on p,p′-aromatic diamines and fumaric acid were synthesized by the phosphorylation method. The polymers were characterized by viscosity, solubility, infrared and UV-visible spectroscopy, and thermogravimetry. The fluorescence spectra of one of the polymers were studied. A model compound, fumaroyldianilide, was synthesized and characterized.     

Preparation of silicon containing polymers—III: Synthesis and characterization of organosilicon azopolyamides

New silicon containing azopolyamides have been prepared from 4,4′-diaminoazobenzene and four structurally related organosilicon acid dichlorides. Polymerization was carried out by the technique of low temperature interfacial polycondensation using methylene chloride-water system. The polymers were yellow to brown in colour. They were characterized by visible and i.r. spectroscopy, X-ray diffraction, solubility and by solution viscosity. Thermal behaviour of these polyamides was studied by dynamic thermogravimetry.     

Synthesis and characterization of organosoluble aromatic copolyimids

A series of aromatic copolyimides was successfully synthesized from the commercial pyromellitic dianhydride (PMDA) with a commercial diamine p-phenyldiamine (PDA) and a diamine 4,4′-methylenebis-(2-tert-butylaniline) (MBTBA) specially designed by the authors. The copolyimides were characterized by Infra-red (IR), Nuclear Magnetic Resonance (NMR), Gel Permeation Chromatography (GPC), Ultraviolet Visual (UV-Vis), Thermogravimetic Analysis (TGA) and Dynamic Mechanical Analysis (DMA). The copolyimide was precipitated in m-cresol in the polymerization process when the molar ratio of MBTBA and PDA was lower than 6/4. The number-average molecular weight of the soluble copolyimides measured by GPC was larger than 4.0 × 10⁴, and the polydispersity index was higher than 1.5. Only one glass transition temperature of these copolyimides was detected around 360°C by DMA. The copolyimides did not show appreciable decomposition up to 500°C under N₂, and the thermal stability of the copolyimide increased a little with the introduction of PDA into the polyimide main chain. Translated from Acta Polymerica Sinica, 2006, (4): 609–614 (in Chinese)     

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Two novel diamine monomers, 1,4‐bis (4‐aminophenoxy)‐2‐[(3′,5′‐ditrifluoromethyl)phenyl]benzene and 1,4‐bis [2′‐cyano‐3′(4″‐amino phenoxy)phenoxy]‐2‐[(3′,5′‐ditrifluoromethyl)phenyl] benzene, were synthesized from (3,5‐ditrifluoromethyl)phenylhydroquinone. A series of ditrifluoromethylated aromatic polyimides derived from the diamines were prepared through a typical two‐step polymerization method. These polyimides had a high thermal stability, and the temperatures at 10% weight loss were above 507 °C in nitrogen. Most of the polymers showed good solubility in anhydrated 1‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, and tetrahydrofuran at room temperature. All the polymers formed transparent, strong, and flexible films with tensile strengths of 63.6–95.8 MPa, elongations at break of 5–10%, and Young's moduli of 2.38–2.96 GPa. The dielectric constants estimated from the average refractive indices are 2.69–2.89. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3018–3029, 2005     

Synthesis and characterization of highly soluble aromatic polyimides

Two highly soluble aromatic polyimides were synthesized successfully from a diamine with two tert-butyl groups （MBTBA）and dianhydrides with a thioether or sulfone moiety（DTDA and DSDA）.Both of them showed excellent solubility in common solvents such as chloroform,tetrahydrofuran and dioxane at the room temperature.The number-average molecular weight was 6.0×10⁴ and 8.3×10⁴ according to gel permeation chromatography relative to a polystyrene standard,and the polydispersity index was 1.80 and 1.82 respectively.The glass-transition temperatures of them were 286℃and 314℃（or 315℃and 358℃）respectively,as measured by differential scanning calorimetry（or dynamic mechanical analysis）.The 5%weight loss temperature of both was near 490℃in N₂ by thermogravimetric analysis.These results indicated that the tert-butyl pendent groups reduced the interactions among polymer chains and the thioether or sulfone moiety was flexible which may improve their solubility in conventional organic solvents without the loss of thermal stability. Transparent and flexible films of the two polyimides were obtained via solution casting.The MBTBA-DTDA membrane had higher storage moduli than those of the MBTBA-DSDA membrane.     

Synthesis and characterization of macrocyclic vinyl aromatic polymers

The synthesis and characterization by size exclusion chromatography, liquid chromatography, NMR, matrix‐assisted laser desorption/ionization, thermal analysis, and other techniques of well‐defined and narrow molecular weight distribution macrocyclic polystyrene (PS), poly(2‐vinylpyridine), poly(α‐methylstyrene), poly (2‐vinyl‐naphthalene) (P2VN), and poly(9,9‐dimethyl‐2‐vinylfluorene) (PDMVF) containing a single 1,4‐benzylidene, methylidene, or 9,10‐anthracenylidene unit are reviewed. The absorption and emission spectroscopy of PS, P2VN, and PDMVF is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2139–2155, 2006     

Synthesis and characterization of some novel aromatic polyimides

Three new diamines 1,2-di(p-aminophenyloxy)ethylene, 2-(4-aminophenoxy)methyl-5-aminobenzimidazole and 4,4-(aminopheyloxy) phenyl-4-aminobenzamide were synthesized and polymerized with 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BP), 4,4′-(hexafluoroisopropyledene)diphthalic anhydride (HF) and 3,4,9,10-perylene tetracarboxylic acid dianhydride (PD) either by one step solution polymerization reaction or by two step procedure. The later includes ring opening poly-addition to give poly(amic acid), followed by cyclodehydration to polyimides with the inherent viscosities 0.62-0.97 dl/g. Majority of polymers are found to be soluble in most of the organic solvents such as DMSO, DMF, DMAc, m-cresol even at room temperature and few becomes soluble on heating. The degradation temperature of the resultant polymers falls in the ranges from 240 °C to 550 °C in nitrogen (with only 10% weight loss). Specific heat capacity at 300 °C ranges from 1.1899 to 5.2541 J g⁻¹ k⁻¹. The maximum degradation temperature ranges from 250 to 620 °C. T_g values of the polyimides ranged from 168 to 254 °C.     

Synthesis and characterization of N-phenylated aromatic polyureas from dianilino compounds and aromatic diisocyanates

N-phenylated aromatic polyureas were synthesized by the polyaddition of dianilino compounds to aromatic diisocyanates in sym-tetrachloroethane at around 100°C. Factors that influence the reaction, such as monomer concentration, reaction solvent, catalyst, temperature, and time, were studied to optimize the conditions for the preparation of high molecular weight polymers. Compared with the analogous unsubstituted aromatic polyureas, the N-phenylated polyureas were almost amorphous and soluble in a variety of solvents and had low glass transition temperatures. Some of the polymers could be cast into transparent flexible films from chloroform solutions.     

Synthesis and characterization of some novel organometallic aromatic polyamides

Some novel ferrocene containing aromatic polyamides were prepared by low‐temperature solution phase polycondensation of 1,1′‐ferrocenedicarboxylic acid chloride with some newly synthesized aromatic diamines in tetrahydrofuran, in the presence of triethylamine. The amorphous polymers were derived in good yields, and did not melt at >350 °C. The monomers and the resulting polymers were characterized by their physical properties, elemental analysis, ¹H‐NMR, FTIR spectroscopy, differential scanning calorimetry and thermogravimetric analyses. The polymeric products were insoluble in common solvents tested. However, all were miscible in concentrated H₂SO₄, forming reddish brown solutions at ambient conditions. The glass transition temperatures (T_g) of these polymers were quite high, which is characteristic of aramids. They are stable up to 500 °C, with 10% mass loss observed in the range 400–650 °C. The activation energies of pyrolysis for each of the products were calculated by Horowitz and Metzger's method. Solution viscosities of the polymers were reduced in concentrated sulfuric acid, which is due to their non‐Newtonian behavior. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and characterization of an unexpected mechanochromicbistricyclic aromatic ene

An unexpected bistricyclic aromatic ene AF was synthesized in a tin(II) chloride-mediated reductive aromatization reaction. The obtained AF showed a highly overcrowded structural conformation as revealed by X-ray crystallography. Interestingly, AF exhibited reversible high-contrast mechanochromism and thermochromism between pale and red color. The obvious chromism is likely ascribed to the conformation transformation and trace amount of diradical species formation upon stimulus.     

Synthesis and characterization of aromatic polyesters with dicyanovinyl substituents

The synthesis, characterization, and structure—property relations of aromatic polyesters with dicyanovinyl substituents is presented. Two comparable series of polyesters based on 3,4-dihydroxybenzylidenemalononitrile and 3,4-dihydroxy-5-methoxybenzylidenemalononitrile were prepared. As aromatic diacid components, terephthalic acid, phenylterephthalic acid, isophthalic acid, and 2-phenylisophthalic acid were used. The polyesters were prepared by solution polycondensation. GPC investigations revealed the existence of substantial amounts of defined cyclic products. These cycles could be isolated by preparative GPC. The polyesters are soluble in common low boiling organic solvents, particularly the phenyl-substituted ones. The polyesters are amorphous and have glass transition temperatures between 140 and 170°C. The absorption maxima are in the 306–322 nm range. The cut-off wavelength is between 400 and 428 nm. The polyesters with methoxy substitutent have generally the absorptions at longer wavelength. The refractive index of thin films of these polyesters were between 1.61 and 1.63 at 632.8 nm. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of acetylene-terminated aromatic amide resin precursors

A series of 10 acetylene-terminated aromatic amide monomers was synthesized by the triethylamine-promoted reaction of bis[p-(m-chlorocarbonylphenoxy)phenyl] sulfone or bis[p-(m-chlorocarbonylphenoxyl)phenyl]ketone with o- or p-ethynyl- and o- or p-trimethylsilylethynylaniline. Yields were essentially quantitative. Structures were verified by infrared and nuclear magnetic resonance spectroscopy and mass spectral data. Thermal characteristics of the monomers were investigated by means of differential scanning calorimetry and thermogravimetric analysis. The initial glass transition temperatures were generally well below the onset of cure which occurred in the 160–225°C range for the terminal ethynyl monomers and in the 260–295°C range for their trimethylsilylethynyl analogs. Onset of decomposition in air for the resinified terminal ethynyl monomers took place in the 400–485°C range, while resins from the trimethylsilylethynyl monomers underwent breakdown at substantially lower temperatures.     

Synthesis and characterization of aromatic polyimides containing tetraphenylfuran-thiazole moiety

Journal of Thermal Analysis and Calorimetry - 2,5-Bis(4-(2-aminothiazole) phenyl)-3,4-diphenyl furan (BATPDF), well prepared in four steps. Novel aromatic polyimides containing...     

Synthesis and characterization of new soluble aromatic polyimides from diaminotetraphenylimidazolinone and aromatic tetracarboxylic dianhydrides

A series of new soluble aromatic polyimides with inherent viscosities of 0.65–1.12 dL/g were synthesized from 1,3-bis(4-aminophenyl)-4,5-diphenylimidazolin-2-one and various aromatic tetracarboxylic dianhydrides by the conventional two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polyimides could also be prepared by the one-pot procedure in homogeneous m-cresol solution. Most of the tetraphenyl-pendant polyimides were soluble in organic solvents such as N,N-dimethylacetamide, 1,3-dimethyl-2-imidazolidone, and m-cresol. Some polyimides gave transparent, flexible, and tough films with good tensile properties. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyimides were in the range of 287–326 and 520–580°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1767–1772, 1998     

Synthesis and characterization of oxygen and sulfur bridged aromatic macrocycles

The synthesis of nine 16–18–20–22 membered, oxygen and sulfur bridged aromatic macrocycles is reported, and reaction pathways to macrocycles formation are described. Molecular characterization of the nine compounds has been achieved by their mass spectra. Due to the cyclic nature of the compounds analyzed, the mass spectra are of particular interest. The 16–18-membered macrocycles, containing single oxygen and sulfur bridges, display very strong molecular ion intensities, while the 20–22-membered macrocycles, containing double bridges, show lower stability to electron-impact, and the molecular ion intensities are lower. Some of the salient features of the electron fragmentation processes are briefly discussed in the text.     

Synthesis and characterization of aromatic polythiazole-amides from new aromatic diamines containing phenyl-pendant thiazole units

New aromatic diamines containing phenyl-pendant thiazole units were synthesized in three steps starting from p-nitrobenzyl phenyl ketone. Novel aromatic polyamides containing phenyl-pendant thiazole units were prepared by the low-temperature solution polyconden-sation of 1,4- (or 1.3-) bis[5-(p-aminophenyl)-4-phenyl-2-thiazolyl] benzene with various aromatic dicarboxylic acid chlorides in N,N-dimethylacetamide. High molecular weight polyamides having inherent viscosities of 0.5–3.0 dL/g were obtained quantitatively. The polythiazole-amides with m-phenylene, 4,4′-oxydiphenylene, and 4,4′-sulfonyldiphenylene units were soluble in N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and pyridine, and gave transparent flexible films by casting from the solutions. These organic solvent-soluble polyamides displayed prominent glass transition temperatures (T_g) between 257 and 325°C. On the other hand, the polythiazole-amides with p-phenylene and 4,4′-biphenylene units were insoluble in most organic solvents, and had no observed T_g. All the polythiazole-amides started to decompose at about 400°C with 10% weight loss being recorded at 450–525°C in air. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of N-phenylated aromatic polyamides from N-silylated dianilino compounds and aromatic diacid chlorides

N-Phenylated aromatic polyamides of high molecular weights were synthesized by the hightemperature solution polycondensation of N,N′ -di(trimethylsilyl)-substituted dianilino compounds derived from p-dianilinobenzene, bis(4-anllinophenyl) ether, and α,α′-dianilino-p-xylene, with isophthaloyl and terephthaloyl chloride. Almost all of the N-phenylated polyamides were amorphous, and soluble in a variety of organic solvents including dimethylformamide, m-cresol, and chloroform. Transparent and flexible films of these polymers could be cast from the dimethylformamide solutions. Four wholly aromatic polyamides had glass transition temperatures in the range of 195–255°C, and began to lose weight around 400°C in air.     

Synthesis and characterization of some aromatic polyamides containing double bonds

Ten polyfumaramides based on fumaric acid and aromatic diamines and six polystilbenediamides based on 4,4′-stilbenedicarboxylic acid and aromatic diamines were synthesized and characterized by solubility, viscosity, density, infrared and UV-visible spectroscopy, and thermal analyses. Variation in properties with structure is discussed here.     

Synthesis and characterization of aromatic polyamides containing alkylphthalimido pendent groups

A series of polyisophthalamides containing pendent phthalimido groups and flexible side spacers were prepared from four novel diacids and three commercial aromatic diamines. These polyamides were prepared in high yields and with high molecular weights by direct polycondensation with triphenyl phosphite and pyridine as condensing agents. The weight‐average and number‐average molecular weights, measured by gel permeation chromatography, were 70,000–137,000 and 47,000–86,000 g/mol, respectively. The novel polyamides were amorphous and readily soluble and showed glass‐transition temperatures of 150–240 °C, as measured by differential scanning calorimetry. Thermogravimetric analysis showed that the 10% weight‐loss temperatures in nitrogen were 355–430 °C, a significant improvement in thermal stability having been observed with the increase in the side‐chain length. A theoretical quantum mechanical study was successfully carried out to explain these results. Flexible and tough films, cast from polymer solutions, showed tensile strengths of 50–125 MPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3711–3724, 2002     

Synthesis and characterization of an amethyrin-uranyl complex displaying aromatic character

Abstract

The reaction between amethyrin and non-aqueous uranyl silylamide (UO₂[N(SiMe₃)₂]₂) under anaerobic conditions affords a bench-stable uranyl complex. UV–vis spectroscopy, cyclic voltammetry, as well as proton NMR spectroscopic analyses provide support for the conclusion that all six pyrrole subunits participate in coordination of the uranyl dication and that, upon complexation, the amethyrin-core undergoes a 2-electron oxidation to yield a formal 22 π-electron aromatic species.