毛竹在氢气中的催化热解研究

本文以分布广、产量大的速生生物质——毛竹为原料,研究其在H2氛围中、不同反应温度下热解所得产物的产率和分布,并与其在N2氛围中热解的结果进行了比较。结果表明,毛竹在H2气氛中热解,比在N2气氛中更有利于液体产物的生成。两种氛围中温度对液体产物影响的趋势不同,在本文条件下,H2气氛中升高温度始终有利于增加液体产率,使生物质有效转化率提高,在H2中毛竹热解生成甲醇、环丙基甲醇、呋喃甲醛等,这在N2中是不易得到的,但液体产物中含量最高的仍是乙酸。     

Mechanistic studies of the photocatalytic oxidation of trichloroethylene with visible-light-driven N-doped TiO2 photocatalysts

Visible-light-driven TiO2 photocatalysts doped with nitrogen have been prepared as powders and thin films in a cylindrical tubular furnace under a stream of ammonia gas. The photocatalysts thus obtained were found to have a band-gap energy of 2.95 eV. Electron spin resonance (ESR) under irradiation with visible light (lambda > or = 430 nm) afforded the increase in intensity in the visible-light region. The concentration of trapped holes was about fourfold higher than that of trapped electrons. Nitrogen-doped TiO2 has been used to investigate mechanistically the photocatalytic oxidation of trichloroethylene (TCE) under irradiation with visible light (lambda > or = 420 nm). Cl and O radicals, which contribute significantly to the generation of dichloroacetyl chloride (DCAC) in the photocatalytic oxidation of TCE under UV irradiation, were found to be deactivated under irradiation with visible light. As the main by-product, only phosgene was detected in the photocatalytic oxidation of TCE under irradiation with visible light. Thus, the reaction mechanism of TCE photooxidation under irradiation with visible light clearly differs markedly from that under UV irradiation. Based on the results of the present study, we propose a new reaction mechanism and adsorbed species for the photocatalytic oxidation of TCE under irradiation with visible light. The energy band for TiO2 by doping with nitrogen may involve an isolated band above the valence band.     

氢氧化铯催化二硫醚、二碲醚与端炔反应研究

氢氧化铯催化下, 以商业THF作溶剂, 在氮气氛中二芳基二硫醚与端炔室温反应, 立体选择地生成(Z)-1,2-二芳硫基烯. 在空气氛中反应, 得到(Z)-1,2-二芳硫基烯与炔硫醚的混合物. 二芳基二碲醚与端炔反应, 不论在氮气氛中或空气氛中, 都只产生炔碲醚. 但是在氮气氛中炔碲醚的收率仅为空气氛中反应的50%, 对上述反应机理进行了讨论.     

聚合物在压力下的流动诱导结晶

流动诱导聚合物结晶研究很少在压力场下开展,其原因是压力下流动诱导聚合物结晶对实验设备要求较高。然而,实际加工中不仅存在流动场,还有压力场。为此,作者课题组利用自制的装置对压力下流动诱导聚合物结晶开展了系统研究,发现其结晶行为与常压的流动诱导结晶有较大差别。等规聚丙烯(iPP)在压力和剪切场下可形成独特取向球形晶体形态。在短时间内(30min),iPP片晶可快速增厚,形成熔点接近平衡熔点的厚片晶(近180℃),其原因是在压力和流动场协同作用下,片晶增厚活化能快速减小。同时,从研究结果也获得了添加β成核剂的iPP体系在压力和流动场下形成β晶的窗口条件。对聚乳酸(PLA)的研究也发现了相似的片晶快速增厚规律。另外,在压力和流动场下,可直接从PLA熔体中获得可增韧PLA的β晶。研究成果为实际加工中的聚合物形态结构调控提供了理论和实验依据。     

Influence of water on molecular forms of rhodamine B in dip-coated thin films

Dip-coated thin films including rhodamine B have been prepared using the sol-gel reaction of tetraethyl orthosilicate under relative humidity of 30% and 60%. They have been aged under relative humidity of 20%, 60%, and 95% for 5 days. According to the absorption spectra, just after the preparation of the films and under higher humidity, a larger amount of the dimers (H-and J-types) were formed in the films. Five days after the preparation of the films and aged under higher humidity, the H-dimer increased. On the other hand, the J-dimer increased, regardless of humidity under which the films were aged.     

CO2气氛对胜利褐煤热解过程的影响

以5-8 mm胜利褐煤为研究对象,利用固定床反应器,在400-700℃、CO₂气氛下进行热解实验,研究了CO₂气氛对煤热解气、液、固三相产物分布的影响,探讨了CO₂对煤焦结构作用的机理。研究表明,与N₂气氛相比,CO₂气氛热解提高焦油和热解水产率,降低热解气和半焦产率;400和500℃时,CO₂气氛下形成的半焦孔隙结构和总孔体积没有明显的变化,600和700℃时,CO₂气氛下所得半焦的比表面积及孔容较N₂气氛下的大,是与煤焦内部挥发分大量释放以及CO₂进入孔道与活性位反应有关;煤热解过程中CO₂的引入能促进煤焦中3-5环芳香结构的消耗,导致煤焦结构芳香度的提高;600和700℃时,CO₂气氛下热解气中H₂和CH₄产率低,同时CO₂能与煤焦发生气化反应显著提高CO含量。     

Al-Ni-Y三元共晶合金高压凝固组织

利用光学显微镜,扫描电镜,X射线衍射仪对不同压力(2,4,6 GPa)下凝固的Al-1Ni-3Y(%,原子分数)共晶合金组织形貌和相组成进行研究,并且与常压条件下合金凝固组织进行对比。实验结果表明,与常压凝固相比,在超高压力条件下凝固的合金的显微组织形貌发生了很大的改变,但是合金的相组成没有发生变化。常压凝固的合金具有共晶团组织,而高压下凝固的合金具有枝晶状亚共晶组织。高压凝固合金显微组织中出现了大量的初生α-Al相,这表明高压条件下凝固的合金共晶点发生偏移,使得常压共晶成分的合金在高压下变成亚共晶成分合金。同时,共晶组织的形貌发生了很大变化,常压下凝固的合金的组织为Al3Y相与α-Al相形成的菊花状的二元共晶和Al23Ni6Y4相与α-Al相形成的层片状的二元共晶,而高压下这两种共晶组织逐渐转化为离异共晶组织。随着压力的增大,共晶第二相的体积分数减小,α-Al的晶格常数增加。     

Drastic high magnetic field effect on suppression of Escherichia coli death

When Escherichia coli B was aerobically grown in a medium containing one-fourth the concentration of the LB medium supplemented with glutamic acid at 43 degrees C under an inhomogeneous 5.2-6.1 T magnetic field, the number of cells in the stationary phase under the high magnetic field was 100,000 times higher than that under a geomagnetic field. The finding that the amount of sigma S factor encoded by the rpoS gene under the high magnetic field was larger than that under the control geomagnetic field indicated that the activity of the rpoS gene was affected by the high magnetic field.     

The Selective C-Mono-and C,C-Dialkylation of Thiophosphorylacetonitriles and Reactivity of the Products

The facile synthetic route to selective C-mono-and C,C-dialkylation of thiophosphorylacetonitriles by primary haloalkanes under phase transfer catalysis conditions has been developed. Using under the same conditions unsymmetric α,ω-dihaloalkanes results in different linear and cyclic products depending on the alkylene chain length. 3-Halopropylsubstituted thiophosphorylacetonitriles synthesized transform to mono-and bis-heterophosphacyclanes under elevated temperatures.     

Fast and mild palladium(II)-catalyzed 1,4-oxidation of 1,3-dienes via activation of molecular oxygen with a designed cobalt(II) porphyrin

The use of a Co(porphyrin)-amide ligand, , in the palladium(II)-catalyzed 1,4-diacetoxylation of conjugated dienes under O2 results in aerobic oxidation. The catalyst was highly active under O2, and the 1,4-diacetoxylation reaction could also be performed under air.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 17. Effect of oxygen availability

The gas in contact with polyethylene has considerable impact on its oxidation. The rate of oxidation product formation is mostly larger with oxygen blanketing than in air. Similarly, the rate in air is larger than that under nitrogen blanketing. Moreover, the relative effect of the surrounding gas is depending heavily on the particular oxidation product considered. The effect on the alcohol concentration on passing from air to pure oxygen is the same as that on the hydroperoxide concentration. It is only under pure nitrogen that alcohol formation is relatively more affected than hydroperoxide formation. The overall carbonyl groups as well as the ketones show the expected ranking, i.e. faster rate in pure oxygen than in air and faster rate in air than under pure nitrogen. However, carboxylic acids are formed much faster in oxygen than in air. For the acids the results in air and under nitrogen are significantly closer in the initial stages of processing than the results obtained under pure oxygen. This is different for γ-lactones for which formation is faster in oxygen than in air where it is faster than under nitrogen. With trans-vinylene groups the situation is opposite to that observed for carboxylic acids: the rate of formation is close for the experiments performed under air and under oxygen and significantly faster than under nitrogen. The results for hydroperoxides, alcohols and ketones are easily interpreted taking into account the kinetics developed in previous work. Fitting the data to the heterogeneous kinetics shows the effect of the oxygen concentration on this kinetics. It is especially unexpected with respect to its impact on the initiation rate. It is discussed taking into account various possibilities. The only one that is compatible with all the data envisages chain initiation resulting from interaction of oxygen with strained polymer molecules.     

Study of elution behaviour with gradient voltage in CEC using methacrylate monolithic columns

A theoretical study on the retention behaviour and chromatographic performance of neutral solutes using a lauryl methacrylate‐based monolithic column under voltage gradient mode in CEC was carried out. Through a flexible mathematical function based on a modified Gaussian model, the peak shape of compounds was firstly fitted under constant and gradient voltage. Using the peak shape parameters and retention time, the estimation of global chromatographic performance, efficiency and peak capacity under several voltage conditions was performed. The influence of voltage gradient on the separation efficiency is discussed and simple equations are presented to calculate retention and peak widths under voltage gradient conditions. A comparison in terms of chromatographic performance of a test mixture of neutral solutes under constant and gradient voltage modes was also carried out. The experiments carried out under gradient voltage showed better efficiencies (172 000 plates/m) and lower peak widths than those obtained under constant voltage (52 000 plates/m).     

Change in broth culture is associated with significant suppression of Escherichia coli death under high magnetic field

When Escherichia coli B was cultivated under an inhomogeneous magnetic field of 5.2-6.1 T, a significant 100,000-fold suppression of cell death was observed [Bioelectrochemistry 53 (2001) 149]. The limited magnetic field exposure for 12 h after logarithmic growth phase was sufficient to observe similar suppressive effects on cell death [Bioelectrochemistry 54 (2001) 101]. These results suggest some possible changes in either the medium or the cells during the magnetic field exposure. When the cell-free filtrate of the broth cultured under the magnetic field for 10 h and the cells of E. coli cultivated under the geomagnetic field for 30 h were mixed, and the mixture was subsequently cultivated under the geomagnetic field, the number of cells observed in the filtrate exposed to the high magnetic field was 20,000 times higher than that in the filtrate exposed to the geomagnetic field. When the cells cultivated under the magnetic field for 10 h and the cell-free filtrate of the broth culture exposed to the geomagnetic field were mixed, only a 50-fold difference in the number of cell between under the magnetic field and under the geomagnetic field was observed. This suggests that the filtrate of the broth culture exposed to the magnetic field is primarily responsible for the cell death suppression. It was also revealed that the small difference in pH of the filtrates of the broth culture between under the magnetic field and under the geomagnetic field was critical for the cell death suppression.     

Effect of biodegradation conditions on morphology of ternary compositions of low density polyethylene with poly(lactic acid) and starch

Polyethylene–poly(lactic acid)–starch ternary compositions were obtained in a rotor disperser under conditions of shear deformation. Their biodegradation under the action of mold fungus spores and soil was investigated using IR spectroscopy and SEM. The changes under the fungal action revealed that the ternary blends represented a nutrient medium, while the exposure to soil led to alteration in morphology due to the whole range of numerous environmental factors.     

Photochemistry and phototoxicity of fluocinolone 16,17-acetonide

Fluocinolone 16,17-acetonide is a corticosteroid used topically to treat various inflammatory skin diseases. Its photoreactivity was studied under UV-A and UV-B light in aqueous buffer in the presence of oxygen. This drug is photolabile under UV-B light and, to a lesser extent, under UV-A light, which is absorbed far less. In phosphate buffer, approximately 80% of fluocinolone acetonide decomposes after 5 J/cm2 of UV-B irradiation, whereas under 30 J/cm2 of UV-A light approximately only 20% decomposes. Both the drug and its photoproducts have been evaluated through a battery of in vitro studies and found to cause photohemolysis and induce photodamage to proteins (erythrocyte ghosts, bovine serum albumin) and linoleic acid. In addition, one of the photoproducts (the 17-hydroperoxy derivative) is highly toxic in the dark. Therefore, both loss of therapeutic activity and light-induced adverse effects may be expected when patients expose themselves to sunlight after drug administration. A major mechanism for phototoxicity involves radicals forming from drug breakdown, at least under UV-B, although reactive oxygen species may play a role, particularly under UV-A.     

Thermal degradation behavior of multi-walled carbon nanotubes/polyamide 6 composites

This paper focuses on the thermal degradation behavior of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites under air and nitrogen atmosphere using thermogravimetric analysis (TGA). The results show that the dispersion of amino-functionalized MWNTs (f-MWNTs) in PA6 is more homogeneous than purified MWNTs (p-MWNTs). The presence of MWNTs improves the thermal stability of PA6 under air obviously, but has little effect on the thermal degradation behavior of PA6 under nitrogen atmosphere. The activation energies for degradation under air, E_a, estimated by Kissinger method, are 153, 165 and 169 kJ/mol for neat PA6, p-MWNTs/PA6 and f-MWNTs/PA6 composites, respectively. The p-MWNTs/PA6 composites show two-step degradation not only under air but also under nitrogen atmosphere, however, neat PA6 and the f-MWNTs/PA6 composites exhibit two-step degradation only under air.     

Fast preparation of dihydrocyclocitral from citronellal under solventless microwave irradiation

Dihydrocyclocitral, a useful reagent in organic synthesis, has been synthesized in high yield and with high stereoselectivity from citronellal under microwave irradiation in two steps, involving acetic anhydride under base catalysis, then p-toluenesulfonic acid adsorbed on silica gel under solventless conditions (80% yield, reaction time 22 min).     

Influence of inherent iron and oxygen concentrations on selenite sorption process using bentonite

The oxygen concentration and inherent Fe in bentonite have a significant influence on the Se(IV) sorption process.In this study,the sorption of selenite on natural bentonite was investigated using a batch experiment method,and the distribution coefficient(K_d)values were obtained in the pH range from 2.0 to 10.0 under oxic/anoxic conditions.The K_d values always reached a maximum value at a pH of 4 under oxic conditions and at a pH of 8 under anoxic conditions;meanwhile,the K_d value under anoxic conditions was larger than the value under oxic conditions,especially in regard to the maximum K_d values.The oxygen conditions have a significant influence on the ratio of redox-sensitive Fe~(2+)/Fe~(3+),which was closely related to the difference in the K_d values under both oxic/anoxic conditions.Ferric selenite and green rust could be responsible for the maximum K_d values under oxic/anoxic conditions.In the leaching experiments,we found that the Fe~(2+) in bentonite could replace Mg~(2+) and Al~(3+) in the octahedral sheet.Spectroscopy methods,such as Fourier transform infrared spectroscopy(FTIR),X-ray diffraction(XRD) and X-ray absorption spectroscopy(XAS) were used to characterize the surface properties of the samples after reaction.Overall,this study shows that the addition of Fe~(2+)-containing materials into backfill/buffer materials under anoxic condition could enhance the sorption of ~(79)Se(IV).     

Recent developments in thermal analysis of polymers: Calorimetry in the limit of slow and fast heating rates

This review focuses on new insights into the crystal melting transition and the amorphous glass transition of polymers that have been gained through recent advances in thermoanalytical methods. The specific heat capacity can now be studied under two extreme limits, that is, under quasi‐isothermal conditions (limit of zero heating rate) and, at the other end of the scale, under rapid heating conditions (heating rates on the order of thousands of degrees per second), made possible through nanocalorimetry. The reversible melting, and multiple reversible melting, of semicrystalline polymers is explored using quasi‐isothermal temperature modulated differential scanning calorimetry, TMDSC. The excess reversing heat capacity, above the baseline, measured under nearly isothermal conditions is attributed to locally reversible surface melting and crystallization processes that do not require molecular nucleation. Observations of double reversible melting endotherms in isotactic polystyrene suggest existence of two distinct populations of crystals, each showing locally reversible surface melting. The second subject of the review, nanocalorimetry, is utilized to study samples of small mass under conditions of very fast heating and cooling. The glass transition properties of thin amorphous polymer films are observed under adiabatic conditions. The glass transition temperature appears to be independent of film thickness, and is observed even in ultra‐thin films. Recrystallization and reorganization during rapid heating are studied by nanocalorimetry of semicrystalline polymers. The uppermost endotherm seen under normal DSC scanning of poly(ethylene terephthalate) is caused by reorganization, and vanishes under the rapid heating conditions (3000K/s) provided by nanocalorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 629–636, 2005     

凝结热对低阶煤低温氧化过程的影响

选用Pulse Calorimeter仪器，研究了低阶煤在干燥氧气下低温氧化过程的反应热和相对湿度为80％的氮气下凝结热与温度的变化，以研究凝结热对低阶煤低温氧化过程的影响。结果表明,随着温度的上升体系的反应热增加，而凝结热减少。在26℃~60℃的低温下，体系的凝结热明显高于反应热。因此，低温下凝结热是影响低阶煤的低温氧化过程的重要因素。研究还得到了低阶煤在干燥氧气下低温氧化过程的动力学方程及活化能。