Studies in nickel(IV) chemistry. Part 6. Kinetics of electron transfer from phenylhydrazine to tris-(dimethylglyoximato) nickelate(IV) in aqueous medium

The kinetics of electron transfer from phenylhydrazine(S) to tris-(dimethylglyoximato) nickelate(IV), Ni(dmg) (dmg^2? = dimethylglyoximate dianion), have been studied in aqueous medium in the range of 6.21 ? pH ? 12.2. The kinetics exhibit a pseudo-first-order disappearance of Ni(dmg) when excess S is present. The pseudo-first-order rate constants k_obs are almost linearly dependent on [S]₀ for varying concentrations of the reductant. At constant [S]₀, the k_obs?pH profile is U shaped. The k_obs values register a decrease as the [H⁺] is increased in the pH range of ∽12.2–9.5, remain almost constant (minimum) in the range of ∽9–8, and then again linearly increase as [H⁺] is increased in the pH range of ∽7–6.21. Results are interpreted in terms of a probable mechanism involving outer-sphere electron transfer from the phenylhydrazine and phenylhydrazinium cation species to the unprotonated and one-protonated species of the Ni(IV) complex. The reduction rate appears to be dependent on the nature of the species (unprotonated and one-protonated) of the oxidant Ni(IV) complex. The phenylhydrazinium cation reduces the Ni(IV) complex at least one order of magnitude faster than does the neutral reductant species. The major product of the oxidation of phenylhydrazine by the Ni(IV) complex is 4-hydroxyazobenzene with a small amount of phenol.     

Studies on kinetics and mechanism of oxidation of D‐sorbitol and D‐mannitol by cerium(IV) in aqueous micellar sulfuric acid media

The kinetics and mechanism of cerium(IV) oxidation of hexitols, i.e. D ‐sorbitol and D ‐mannitol, in aqueous sulfuric acid media have been studied in the presence and absence of surfactants. Under the kinetic conditions, [S]_T ? [Ce(IV)]_T, where [S]_T is the total substrate (D ‐sorbitol or D ‐mannitol) concentration, the overall process shows a first‐order dependence on [Ce(IV)]_T and [S]_T. The process is acid catalyzed and inhibited by [HSO]. From the [HSO] dependence, it has been noted that the both Ce(SO₄)²⁺ and Ce(SO₄)₂ have been found kinetically active. The different rate constants in the presence and absence of surfactants have been estimated with the activation parameters. N‐cetylpyridinium chloride has been found to retard the oxidation process of hexitols, whereas sodium dodecyl sulfate has been found to accelerate the rate process. All these findings including the micellar effects have been interpreted in terms of the proposed reaction mechanism and partitioning behavior of the kinetically active different species of Ce(IV) between the aqueous and pseudomicellar phase. © 2008 Wiley Periodicals, Inc. 40: 445–453, 2008     

Kinetics and mechanism of acetylacetonate transfer from acetylacetonatomanganese(III) to iron(III) in acetonitrile catalysis and inhibition effects

The reaction between tris(acetylacetonato)magnanese(III) and hexa(N,N-dimethylformamide)iron(III) perchlorate in acetonitrile proceeds in two stages. The first stage corresponds to the reaction of pentacoordinated Fe(DMF) with Mn(acac)₃, and the rate-determining step of the second stage consists mainly in the elimination of a DMF ligand from Fe(DMF) to yield Fe(DMF) which reacts rapidly with the manganese complex. The formation of Fe(DMF) is catalyzed by Mn(acac)₃, this catalytic effect being decreased by manganese products. The rate-determining step for the formation of Fe(acac)₃ is the transfer of the first acetylacetonate to yield Fe(acac)²⁺. The final products of iron depend on the ratio of reactant concentrations. With Mn or Fe in excess, Fe(acac)₃ or Fe(acac)²⁺ are mainly produced.     

Autocatalytic oxidation of β‐alanine by peroxomonosulfate in the presence of copper(II) ion

Kinetics and mechanism of oxidation of β‐alanine by peroxomonosulfate (PMS) in the presence of Cu(II) ion at pH 4.2 (acetic acid/sodium acetate) has been studied. Autocatalysis was observed only in the presence of copper(II) ion, and this was explained due to the formation of hydroperoxide intermediate. The rate constant for the catalyzed (k) and uncatalyzed (k) reaction has been calculated. The kinetic data obtained reveal that both the reactions are first order with respect to [PMS]. k values initially increase with the increase in [β‐alanine] and reach a limiting value, but k values decrease with the increase in [β‐alanine]. k values increase linearly with the increase in [Cu(II)], whereas k values increase with [Cu(II)]². Furthermore, k values are independent of [acetate], but k values decrease with the increase in acetate. A suitable mechanism has been proposed to explain the experimental observation. The reaction has been studied at different temperatures, and the activation parameters are calculated. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 40: 44–49, 2008     

Kinetics of the simultaneous oxidation of nickel(II) and sulfur(IV) by oxygen in alkaline medium in Ni(II)–sulfur(IV)–O2 system

In the Ni(II)–S(IV)–O₂ system in the region of pH > 8.4, both Ni(II) and S(IV) are simultaneously autoxidized, and when sulfur is consumed fully NiOOH precipitates. At pH > 8.4, ethanol has no effect on the rate, whereas ammonia strongly inhibits the reaction when pH > 7.0. The kinetics of the reaction, in both the presence and the absence of ethanol, is defined by the rate law where k is the rate constant, K_O is the equilibrium constant for the adsorption of O₂ on ? Ni(OH)₂ particle surface. In ammonia buffer, the factor F is defined by where K, K_OH, K₁, K₂, K₃, and K₄ are the stability constants of NiSO₃, NiOH⁺, Ni(NH₃)²⁺, Ni(NH₃), Ni(NH₃), and Ni(NH₃), respectively. In unbuffered medium, the factor F reduces to The values of k and K^sp were found to be (1.3 ± 0.08) × 10^?1 s^?1 and (4.2 ± 3.5) × 10^?16, respectively, at 30°C. A nonradical mechanism that assumes the adsorption of both SO₃^2? and O₂ on the ? Ni(OH)₂ particle surface has been proposed. At pH ≤ 8.2, Ni(II) displays no catalytic activity for sulfur(IV)‐autoxidation and it is also not oxidized to NiOOH. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 464–478, 2010     

Disproportionation-to-combination ratios for cyclohexyl-h11 and -d11 radicals in the gas phase as determined by the radiolysis of water vapor–cyclohexane mixtures

In the radiolysis of water vapor containing small concentrations of cyclohexane, the principal products which account for about 98% of all end products are found to be hydrogen, cyclohexene, and bicyclohexyl. Cyclohexene and bicyclohexyl yields were determined over a range of temperatures (70–200°C), total pressures (50–2400 torr), and total doses (0.15–2.0 Mrad). The disproportionation–combination ratio k/k for c-C₆H₁₁ radicals could be determined as 0.56 ± 0.01 from the ratio of cyclohexene to bicyclohexyl yield. By using c-C₆D₁₂, the ratio k/k for c-C₆D₁₁ radicals is found to be 0.38 ± 0.01. Comparison of the reactivity pattern of C₆H₁₁ and C₆D₁₁ radicals leads to (k)/(k)/(k/k) = 1.47 ± 0.02. The corresponding values for the reactions of c-C₆H₁₁ with c-C₆D₁₁ were also determined.     

Kinetics of the solvolysis of [Co(3Rpy)4Cl2]+ ions (R = Me or Et) in water and in water + methanol mixtures

Rates of solvolysis of ions [Co(3Rpy)₄Cl₂]⁺ with R = Me and Et have been measured over a range of temperatures for a series of water-rich water + methanol mixtures to investigate the effect of changes in solvent structure on the solvolysis of complexes presenting a largely hydrophobic surface to the solvent. The variation of the enthalpies and entropies of activation with solvent composition has been determined. A free energy cycle relating the free energy of activation in water to that in water + methanol is applied using free energies of transfer of individual ionic species from water into water + methanol. Data for the free energy of transfer of chloride ions ΔG(Cl^?) from both the spectrophotometric solvent sorting method and the TATB method for separating ΔG(salt) into ΔG(i) for individual ions are used: irrespective of the source of ΔG(Cl^?), in general, ?ΔG(Co(Rpy)₄Cl²⁺) > ?ΔG(Co(Rpy)₄Cl₂⁺), where Rpy = py, 4Mepy, 4Etpy, 3Etpy, and 3Mepy, showing that changes in solvent structure in water-rich water + methanol mixtures generally stabilize the cation in the transition state more than the cation in the initial state for this type of complex ion. A similar result is found when the free energy cycle is applied to the solvolysis of the dichloro (2,2′,2″-triaminotriethylamine)cobalt(III) ion. The introduction of a Me or Et group on the pyridine ring in [Co(Rpy)₄Cl₂]⁺ has little influence on the difference {ΔG(Co(Rpy)₄Cl²⁺)?ΔG(Co(Rpy)₄Cl₂⁺)} in water + methanol with the mol fraction of methanol < 0.20.     

Kinetics of Ce(IV) oxidation of α-keto acids in sulfuric-perchloric acid media

The rates of oxidation of four α-keto acids, glyoxylic, pyruvic, phenylglyoxylic, and 2-oxobutyric acids by Cerium(IV) in H₂SO₄? HaHSO₄ and H₂SO₄? HClO₄ solutions, have been studied spectrophotometrically. The rate data suggest that CeSO is the most reactive of the Cerium(IV)-sulfate complexes present in the H₂SO₄? NaHSO₄ and H₂SO₄? HClO₄ systems. The oxidation reaction is proposed to be a one-electron process with the rate-determining step being the decomposition of a α-ketoacid-Cerium(IV) complex to a free radical and carbon dioxide through a transition state.     

Kinetics and mechanism of oxidation of benzohydrazide by bromate catalyzed by vanadium(IV) in aqueous acidic medium

The reaction between benzohydrazide and potassium bromate catalyzed by vanadium(IV) was studied under pseudo‐first‐order condition keeping large excess of hydrazide concentration over that of the oxidant. The initiation of the reaction occurs through oxidation of the catalyst vanadium(IV), VO²⁺, to vanadium(V), VO, which then reacts with hydrazide to give N,N′‐diacylhydrazine and benzoic acid as the products. The order in [H⁺] is found to be two, and its effect is due to protonation and hydrolysis of oxidized form of the catalyst to form HVO₃. The oxidized form of the catalyst, VO, forms a complex with the protonated hydrazide as evidenced by the occurrence of absorption maxima at 390 nm. The rate of the reaction remains unaffected by the increase in the ionic strength. The activation parameters were determined, and data support the mechanism. The detailed mechanism and the rate equation are proposed for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 151–159, 2008     

Peculiar kinetics of the complex formation in the iron(III)–sulfate system

The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+$ step and k₂ = 1.1 × 10³ M^?1 s^?1 for the ${\rm FeSO}_4^+ + {\rm SO}_4^{2-} \stackrel{k_2}{\rightleftharpoons}\, {\rm Fe}({\rm SO}_4)_2^-$ step. The mono‐sulfate complex is also formed in the ${\rm Fe}({\rm OH})^{2+} + {\rm SO}_4^{2-} \stackrel{k_{1b}}{\longrightarrow} {\rm FeSO}_4^+$ reaction with the k_1b = 2.7 × 10⁵ M^?1 s^?1 rate constant. The most surprising result is, however, that the 2 FeSO? Fe³⁺ + Fe(SO₄) equilibrium is established well before the system as a whole reaches its equilibrium state, and the main path of the formation of Fe(SO₄) is the above fast (on the stopped flow scale) equilibrium process. The use and advantages of our recently elaborated programs for the evaluation of equilibrium and kinetic experiments are briefly outlined. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 114–124, 2008     

The acetyl radicals CH3CO· and CD3CO· studied by flash photolysis and kinetic spectroscopy

Ultraviolet absorption spectra have been characterized for the acetyl-h₃ and acetyl-d₃ radicals, which were generated by the flash photolysis of the corresponding acetones. The spectra are broad and intense, with values of the extinction coefficient at the respective maxima estimated as: ?CH₃CO(215) = (1.0 ± 0.1) × 10⁴ L/mol·cm and ?CD₃CO(207.5) = (1.0 ± 0.05) × 10⁴ L/mol·cm. Rate constants for the reactions of mutual interaction were estimated as: k = 3.5 × 10¹⁰ L/mol·s and k = 3.4 × 10¹⁰ L/mol·s. Rate constants for the reactions of cross interaction were estimated as: k = 8.6 × 10¹⁰ L/mol·s and k = 5.2 × 10¹⁰ L/mol·s. The related values of the cross interaction ratios k/(kk)^1/2 = 2.6 and k/(kk)^1/2 = 1.6 do not differ significantly from the statistical value of 2. The participation of the radical displacement reactions was estimated in terms of the fractions k/k = 0.38 and k/k = 0.47. Corroborative spectra were obtained from the flash photolysis of methyl ethyl ketone and biacetyl, and the relative rates of the competing primary processes were estimated from the relative peak heights of the acetyl and methyl radicals in each system.     

Kinetics of acid catalyzed and Ag(I) catalyzed decomposition of peroxodisulfate in aqueous medium

The mechanism of acid catalyzed decomposition of peroxodisulfate, (S₂O) in aqueous perchlorate medium involves the hydrolysis of the species H₂S₂O₈ and HS₂O and the homolysis of the species H₂S₂O₈, HS₂O and S₂O at the O? O bond. The overall rate law when 1.4M > [HClO₄] > 0.1M is The constants k′ and k″ contain the hydrolysis and homolysis rate constants of HS₂O₈^? and H₂S₂O₈, respectively. With added Ag(I), the acid catalyzed and Ag(I) catalyzed reactions take place independently. Ag(I) catalyzed decomposition appears to involve the species AgS₂O (aq).     

Kinetics and mechanism of electron transfer from phenolate anion to hexacyanoferrate (III) in aqueous alkaline media

A kinetic reinvestigation of the title redox system in aqueous alkaline media at 35°C and an ionic strength of 0.5 mol dm^?3 shows that the reaction follows a pseudosecond-order Fe(CN) disappearance. While varying [phenol]₀ and [OH^?] exhibit a linear influence on the pseudo-second-order rate constant, varying[Fe(CN)]₀ and [Fe(CN)]₀, initially taken, have a complicated inhibitory effect on the same. The major phenoloxidation products isolated under a chosen condition are 2,2′- and 4,4′- dihydroxydiphenyl. Results are interpreted in terms of a probable mechanism which envisages a reversible formation, by the first one-electron transfer, of a reactive phenoxy radical (PhO^˙) which on the second one-electron transfer forms a less reactive ion-pair intermediate (stabilized by the Fe(CN) produced) to decompose rate-determiningly to phenoxonium cation (PhO⁺) and Fe(CN), the product-formation steps being very rapid and kinetically indistinguishable.     

Kinetics and mechanism of the oxidation of N-methylformamide and N,N-dimethylformamide by silver (II) in aqueous perchlorate media and comparison with oxidation by CoIII and MnIII

Detailed measurements on the kinetics and stoichiometry of the oxidation of N-methylformamide and N,N-dimethylformamide by aquosilver (II) ions are reported. Four Ag ions are consumed for each amide, and the reaction is first order in [Ag] and first order in [amide]. The reaction is inversely dependent on acidity in the range of 1.5–5.0M HClO₄. The oxidation rate is independent of [Ag^I] and ionic strength. The proposed reaction mechanism and activation parameters are compared with those found for the oxidation of amides by other oxidants such as cobalt(III) and manganese(III).     

A pulse radiolysis study of I and (SCN) in aqueous solutions over the temperature range 15–90°C

The extinction coefficients and the decay kinetics of I and (SCN) have been characterized over the 15–90°C-temperature range. The extinction coefficients of I at 385 and 725 nm were determined to be 10,000 and 2560M^?1 cm^?1, respectively, based on the extinction coefficient of (SCN) at 475 nm being equal to 7600M^?1 cm^?1. At these three wavelengths, all extinction coefficients were constant over the temperature range studied. The rate of decay of both I and (SCN) was found to be a function of I^? and SCN^? concentration, respectively, as well as temperature.     

Kinetics and mechanism of oxidation of indole by HSO

Mechanistic studies on the oxidation of indole [IND] by HSO in aqueous CH₃CN medium (80:20 v/v) have been carried out, and the reaction is characterized by the rate law ?d[HSO]/dt = k[IND][HSO]HSO and SO are probably the respective electrophiles in acidic and basic mediums. Nucleophilic attack of the ethylenic bond on the persulfate oxygen is envisaged to explain the reactivity. The reaction fails to initiate polymerization, and a radical mechanism is ruled out. Thermodynamic parameters very much suggest a bimolecular process. No significant catalytic activity is observed for the reaction system in the presence of Ag⁺, Cu²⁺, and heteroaromatic N‐bases. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 46–51, 2007     

Kinetic characteristics of chloride-assisted oxidative dealkylation of alkylcobalamins

The recent experiments on the chloride-assisted dealkylation of alkylcobalamins by a variety of oxidants (IrCl, AuCl, Fe(H₂O)₅Cl²⁺, and PtCl), which are scattered in several previous publications, and their general kinetic characteristics are summarized. The kinetic studies are also extended to include the dealkylations of (methylaquo)?3,5,6-trimethylbenzimidazolylcobamide and protonated base-off ethylcobalamin by IrCl (1.0M Cl^?) and by Fe(III) ions at 0.1M Cl^?, and the demethylation of (methylaquo)?3,5,6-trimethylbenzimidazolylcobamide by AuCl (1.0M Cl^?). This extension is in an effort to substantiate the general mechanism which has been previously proposed for these oxidative dealkylations. The general kinetic characteristics are described in terms of a preassociation of the reactants, followed by a rate-determining electron-transfer process to yield the R-B radical, which then undergoes further reactions to produce the products observed. The overall reactions are discussed within the framework of chlorine-bridging inner sphere electron-transfer reactions.     

Kinetics of the reaction O(3P) + SO2 + M → SO3 + M over the temperature range of 299°–440°K

Rate constants for the reaction O(³P) + SO₂ + M have been determined over the temperature range of 299°–440°K, using a flash photolysis–NO₂ chemiluminescence technique. For M?Ar, the Arrhenius expression was obtained. At room temperature k₂^Ar = (1.05 ± 0.21) × 10^?33 cm⁶/molec²·sec. In addition, the rate constants k₂ = (1.37 + 0.27) × 10^?33 cm⁶/molec²·sec, k₂ = (9.5 ± 3.0) ± 10^?33 cm⁶/molec²·sec, k₃ = (1.1 ± 0.2) ± 10^?31 cm⁶/molec²·sec, and k₃ = (2.6 ? 0.9) ± 10^?31 cm⁶/molec²·sec were obtained at room temperature where k₃^M is the rate constant for the reaction O + NO + M → NO₂ + M. The rate data are compared and discussed with literature values.     

CH bond dissociation energies,isolated stretching frequencies,and radical stabilization energy

An earlier correlation between isolated CH stretching frequencies, v, and experimental CH bond dissociation energies, in hydrocarbons, fluorocarbons, and CHO compounds, is updated. A stabilization energy, E, which reflects only the properties of the radical, is defined by the deviation of a point from the above correlation. E values for a variety of radicals are listed and discussed. In H? C? N and H? C? O compounds E is low or negligible, due to the low v found in these compounds. The conventional definition of E_S then represents a serious misnomer, which distracts attention from the probable source of discrepancies between experimental and ab initio values of DH°(C? H), namely, the parent molecules. Stereo electronic effects concerned with the breaking of CH bonds are predicted in a variety of situations. Some experimental determinations of DH°(C? H), viz., in C₂H₄, HCOOH, CH₃CHO, CH₃NH₂, are considered to be probably in error. Schemes for partitioning energies of atomization into ‘standard’ or ‘intrinsic’ bond energies are criticized.     

Kinetic study of the interaction of adenosine 5′‐monophosphate with diaqua (2‐hydrazinopyridine) palladium(II) in aqueous medium

The interaction of the palladium(II) complex [Pd(hzpy)(H₂O)₂]²⁺, where hzpy is 2‐hydrazinopyridine, with purine nucleoside adenosine 5′‐monophosphate (5′‐AMP) was studied kinetically under pseudo‐first‐order conditions, using stopped‐flow techniques. The reaction was found to take place in two consecutive reaction steps, which are both dependent on the actual 5′‐AMP concentration. The activation parameters for the two reaction steps, i.e. ΔH = 32 ±2 kJ mol^?1, ΔS = ?168 ±7 J K^?1 mol^?1, and ΔH = 28 ± 1 kJ mol^?1, ΔS = ?126 ± 5 J K^?1 mol^?1, respectively, were evaluated and suggested an associative mode of activation for both substitution processes. The stability constants and the associated speciation diagram of the complexes were also determined potentiometrically. The isolated solid complex was characterized by C, H, and N elemental analyses, IR, magnetic, and molar conductance measurements. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 132–142, 2010