Neue Sulfobutyl-haltige Bis(dimethinmerocyanin)-Farbstoffe mit isolierten Chromophoren im Molekül und deren Aggregationsverhalten in wässeriger Lösung

Novel Bis(dimethinemerocyanine) Dyes with Isolated Chromophores in the Molecule Containing the Sulfobutyl Group and their Aggregation Tendency in Aqueous Solution The bis(dimethinemerocyanine) dyes 7a – c with Chromophores separated by a polymethylene chain as ‘isolator’ are synthesized in good yield. Their aggregation tendency in organic solvents, organic solvents/H₂O mixtures, and in H₂O is investigated. In organic solvents, the dyes 7a – b show a splitted absorption band, due to interaction of the two Chromophores of the dye. In H₂O, 7a exhibits an intense absorption band at 496 nm (? = 224 300 1·mol^?1·cm^?1) with a small width $ (\tilde v_{{\raise0.7ex\hbox{$1$} \!\mathord{\left/ {\vphantom {1 2}}\right.\kern-\nulldelimiterspace} \!\lower0.7ex\hbox{$2$}}} = 1000\;{\rm cm}^{ - 1}) $ and shoulders at 552 and 580 nm. In presence of starch, this absorption band shifts to 617 nm, probably due to J-aggregation. The dye 7b shows the same spectral behaviour as 7a . In contrast, 7c exhibits an absorption band without splitting in organic solvents; the interaction of the Chromophores has disappeared. In H₂O and in H₂O containing starch, 7c shows a wide absorption band, due to interaction of the Chromophores of the dye.     

Über den Einfluss des Akzeptor-Teilchromophors bei Dimethin-merocyanin-Farbstoffen auf das Aggregationsverhalten in wässriger Lösung

On the Influence of the Acceptor Part of the Chromophor of Dimethinemerocyanine Dyes upon the Aggregation Tendency in Aqueous Solution A series of novel long-chain alkyl-dimethinemerocyanine dyes containing sulfonate groups is synthesized in good yield and their aggregation tendency in H₂O and in organic solvent/H₂O mixtures investigated. The merocyanine dyes 11 and 15 only exhibit an intense, red-shifted absorption band due to J-aggregation in H₂O without addition of salt. The influence of cationic and anionic tensides and other compounds as urea, glucose, and polysaccharides upon the J-aggregation tendency is investigated.     

Neue Dimethinmerocyanin-Farbstoffe mit der (Sulfobutyl)benzothiazol-Gruppe als Donor-Teilchromophor und deren Aggregationsverhalten in wässriger Lösung

Novel Dimethinemerocyanine Dyes with the (Sulfobutyl)benzothiazole Group as Donor Part of the Chromophor and their Aggregation Tendency in Aqueous Solution A series of novel dimethinemerocyanine dyes with the (sulfobutyl)benzothiazole group as the donor part of the chromophor is synthesized in good yield and their aggregation tendency in H₂O without addition of salt investigated. The merocyanine dye 2b only gives J-aggregation in H₂O. The dyes 1a–f and 2a exhibit an intense, red-shifted absorption band due to J-aggregation in H₂O in the presence of Me₄NCl. In contrast, the dyes 1g and 2c–f show a slightly red-shifted absorption band. The degree of aggregation in H₂O is investigated by ultracentrifugation of the representative 2e . Indeed, the slightly red-shifted absorption band in H₂O is due to aggregation of ‘oligomers’ of the dye. Contrary to the aggregation of ‘polymers’ of dyes (J-aggregation), we suggest the term ‘K’ band for the slightly red-shifted absorption band. The hemicyanine dye 5 gives the same absorption band in MeOH and in MeOH/H₂O 1:3. The dye 11 shows an absorption band in H₂O that is probably blue-shifted because of negative solvatochromism. The merocyanine dye 13 gives H-aggregation in H₂O.     

Fluorine‐containing vinyl ether polymers: Living cationic polymerization in fluorinated solvents as new media and unique solubility characteristics in organic solvents

Living cationic polymerization of fluorine‐containing vinyl ethers [CH₂?CH? O? C₂H₄? O? C₃H₆? C_nF_2n+1: 5FVE (n = 2), 13FVE (n = 6)] was investigated in various solvents with a CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5 initiating system in the presence of an added base. 5FVE was polymerized quantitatively in toluene at 0 °C, and the obtained polymers had predetermined molecular weights with narrow molecular weight distributions (M_w/M_n < 1.1). On the other hand, for the polymerization of 13FVE, the product polymers precipitated due to their extremely poor solubility in nonfluorinated organic solvents. Therefore, fluorinated solvents such as hydrochlorofluorocarbons, hydrofluorocarbons, hydrofluoroethers, or α,α,α‐trifluorotoluene, as‐yet uninvestigated for cationic polymerization, were employed. In these solvents, living polymerization was achieved even with 13FVE, yielding well‐defined polymers (M_w/M_n < 1.1, by size exclusion chromatography using a fluorinated solvent as an eluent). The solvents were also shown to be good for living polymerization of isobutyl vinyl ether. The obtained fluorine‐containing polymers underwent temperature‐responsive solubility transitions in organic solvents. Poly(5FVE) showed sensitive upper critical solution temperature (UCST)‐type phase separation behavior in toluene. Copolymers of 13FVE and isobutyl vinyl ether showed UCST‐type phase separation in common organic solvents with different polarities depending on their composition, while a homopolymer of 13FVE was insoluble in all nonfluorinated organic solvents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effects of mixed aqueous‐organic solvents on the rate of intramolecular carboxylic group‐catalyzed cleavage of N‐(4′‐methoxyphenyl)phthalamic acid

Kinetic study on the cleavage of N‐(4′‐methoxyphenyl)phthalamic acid (NMPPAH) in mixed H₂O‐CH₃CN and H₂O‐1,4‐dioxan solvents containing 0.05 M HCl reveals the formation of phthalic anhydride (PAn)/phthalic acid (PA) as the sole or major product. Pseudo first‐order rate constants (k₁) for the conversion of NMPPAH to PAn decrease nonlinearly from 60.4 × 10^?5 to 2.64 × 10^?5 s^?1 with the increase in the contents of 1,4‐dioxan from 10 to 80% v/v in mixed aqueous solvents. The rate of cleavage of NMPPAH in mixed H₂O‐CH₃CN solvents at ≥50% v/v CH₃CN follows an irreversible consecutive reaction path: NMPPAH PA. The values of k₁ are larger in H₂O‐CH₃CN than in H₂O‐1,4‐dioxan solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 316–325, 2004     

Construction and photocatalytic properties of two metal‐mediated coordination polymers based on benzene‐1,3,5‐tricarboxylic acid and trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene

With the rapid development of modern industry, water pollution has become an intractable environmental issue facing humans worldwide. In particular, the organic dyes discharged into natural water from dyestuffs, dyeing and the textile industry are the main sources of pollution in wastewater. To eliminate these types of pollutants, degradation of organic contaminants through a photocatalytic technique is an effective methodology. To exploit more crystalline photocatalysts for the degradation of organic dyes, two coordination polymers, namely catena‐poly[[(3,5‐dicarboxybenzene‐1‐carboxylato‐κO ¹)silver(I)]‐μ‐trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene‐κ²N :N ′], [Ag(C₉H₅O₆)(C₁₂H₁₀N₂)]_n or [Ag(H₂BTC)(3,4′‐bpe)]_n , (I), and poly[[(μ₃‐5‐carboxybenzene‐1,3‐dicarboxylato‐κ⁴O ¹,O ^1′:O ³:O ³)[μ‐trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene‐κ²N :N′ ]cadmium(II)] monohydrate], {[Cd(C₉H₄O₆)(C₁₂H₁₀N₂)]·H₂O}_n or {[Cd(HBTC)(3,4′‐bpe)]·H₂O}_n , (II), have been prepared by the hydrothermal reactions of benzene‐1,3,5‐tricarboxylic acid (H₃BTC) and trans‐1‐(pyridin‐3‐yl)‐2‐(pyridin‐4‐yl)ethene (3,4′‐bpe) in the presence of AgNO₃ or Cd(NO₃)₂·4H₂O, respectively. These two title compounds have been structurally characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction. In (I), the Ag^I ions and organic ligands form a one‐dimensional coordination chain, and adjacent coordination chains are connected by Ag…O interactions to give rise to a two‐dimensional supramolecular network. Each two‐dimensional network is entangled with other equivalent networks to generate an infrequent interlocked 2D→3D (2D and 3D are two‐ and three‐dimensional, respectively) supramolecular framework. In (II), the Cd^II ions are bridged by the HBTC²⁻ and 3,4′‐bpe ligands, which lie across centres of inversion, to give a two‐dimensional coordination network. The thermal stabilities and photocatalytic properties of the title compounds have also been studied.     

Cationic,neutral and anionic metal(II) complexes derived from 4‐oxo‐4H‐pyran‐2,6‐dicarboxylic acid (chelidonic acid)

The structures of five metal complexes containing the 4‐oxo‐4H‐pyran‐2,6‐dicarboxylate dianion illustrate the remarkable coordinating versatility of this ligand and the great structural diversity of its complexes. In tetraaquaberyllium 4‐oxo‐4H‐pyran‐2,6‐dicarboxylate, [Be(H₂O)₄](C₇H₂O₆), (I), the ions are linked by eight independent O—H...O hydrogen bonds to form a three‐dimensional hydrogen‐bonded framework structure. Each of the ions in hydrazinium(2+) diaqua(4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)calcate, (N₂H₆)[Ca(C₇H₂O₆)₂(H₂O)₂], (II), lies on a twofold rotation axis in the space group P2/c; the anions form hydrogen‐bonded sheets which are linked into a three‐dimensional framework by the cations. In bis(μ‐4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)bis[tetraaquamanganese(II)] tetrahydrate, [Mn₂(C₇H₂O₆)₂(H₂O)₈]·4H₂O, (III), the metal ions and the organic ligands form a cyclic centrosymmetric Mn₂(C₇H₂O₆)₂ unit, and these units are linked into a complex three‐dimensional framework structure containing 12 independent O—H...O hydrogen bonds. There are two independent Cu^II ions in tetraaqua(4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)copper(II), [Cu(C₇H₂O₆)(H₂O)₄], (IV), and both lie on centres of inversion in the space group P; the metal ions and the organic ligands form a one‐dimensional coordination polymer, and the polymer chains are linked into a three‐dimensional framework containing eight independent O—H...O hydrogen bonds. Diaqua(4‐oxo‐4H‐pyran‐2,6‐dicarboxylato)cadmium monohydrate, [Cd(C₇H₂O₆)(H₂O)₂]·H₂O, (V), forms a three‐dimensional coordination polymer in which the organic ligand is coordinated to four different Cd sites, and this polymer is interwoven with a complex three‐dimensional framework built from O—H...O hydrogen bonds.     

Neue Dimethinmerocyaninfarbstoffe mit J-Aggregation in stark verdünnter Lösung

Novel Dimethinmerocyanine Dyes Performing J-Aggregation in Highly Diluted Solution A series of various novel long-chain alkyl-dimethinmerocyanine dyes containing sulfonate groups is obtained in high yield by modified condensation reactions of sulfoalkyl- or sulfophenylsubstituted methylene ketones. The dyes exhibit intense, red-shifted absorption bands (? up to 263 000) due to J-aggregation in DMSO/H₂O mixtures without addition of salt even at dye concentrations of 5 · 10^?8M. The influence of dye structure and medium on the aggregation tendency is investigated. Besides it is found that exchange of the cationic counterions does not affect J-aggregation.     

A Microporous Anionic Metal–Organic Framework for Sensing Luminescence of Lanthanide(III) Ions and Selective Absorption of Dyes by Ionic Exchange

Herein, a novel anionic framework with primitive centered cubic (pcu) topology, [(CH₃)₂NH₂]₄[(Zn₄dttz₆)Zn₃]?15 DMF?4.5 H₂O, ( IFMC‐2 ; H₃dttz=4,5‐di(1H‐tetrazol‐5‐yl)‐2H‐1,2,3‐triazole) was solvothermally isolated. A new example of a tetranuclear zinc cluster {Zn₄dttz₆} served as a secondary building unit in IFMC‐2 . Furthermore, the metal cluster was connected by Zn^II ions to give rise to a 3D open microporous structure. The lanthanide(III)‐loaded metal–organic framework (MOF) materials Ln³⁺@IFMC‐2 , were successfully prepared by using ion‐exchange experiments owing to the anionic framework of IFMC‐2 . Moreover, the emission spectra of the as‐prepared Ln³⁺@IFMC‐2 were investigated, and the results suggested that IFMC‐2 could be utilized as a potential luminescent probe toward different Ln³⁺ ions. Additionally, the absorption ability of IFMC‐2 toward ionic dyes was also performed. Cationic dyes can be absorbed, but not neutral and anionic dyes, thus indicating that IFMC‐2 exhibits selective absorption toward cationic dyes. Furthermore, the cationic dyes can be gradually released in the presence of NaCl.     

A Hydrogen‐Bonded Framework Complex without Lattice Solvents: Synthesis Reversible Crystal‐to‐Amorphous Transformation and Chromic Properties

Reaction of Ni(NO₃)₂·6H₂O with H₄BPTC (H₄BPTC = Biphenyl‐3,3′,4,4′‐tetracarboxylic acid) produced a 3D hydrogen‐bonded framework complex 1 , not containing lattice solvents, with empirical formula [Ni(H₂O)₆]·H₂BPTC. The complex exhibits an interesting reversible crystal‐to‐amorphous transformation property unaccompanied by lattice solvents release/loading and shows selective and reversible chromic response to methanol.     

Sur quelques réactions par décharge électrique dans les systèmes phosphine-eau,phosphine-eau-ammoniac et phosphine-eau-ammoniac-méthane

Electric discharge reactions in the systems PH₃ + H₂O, PH₃ + H₂O + NH₃ and PH₃ + H₂O + NH₃ + CH₄ have been studied. In the system PH₃ + H₂O, they produce polyphosphines (insoluble in water) and hypophosphorous, phosphorous and orthophosphoric acids. In the system PH₃ + H₂O + NH₃, besides the above products, hypophosphate, pyrophosphate, polyphosphates and possibly polyhyphosphates are also present. In the system PH₃ + H₂O + NH₃ + CH₄, besides all the above inorganic P compounds, organic phosphorus derivatives such as aminoalkyl phosphates and aminoalkanephosphonates are also formed, as well as other non-phosphorus containing organic products (amino acids, ethanolamine, etc.). The presence of phosphine (or its transformation products), seems to promote condensation reactions in this system since the ratio of amino acids found after hydrolysis (in 6N HCl) to amino acids found before hydrolysis is greater in this system. than in the system (CH₄+ H₂O+ NH₃)iiot containing phosphine.     

Solvent-tuned polyoxometalate-based supramolecular hybrids constructed from different metal-organic motifs: Various structures and adsorption properties for dyes

Three polyoxometalate-based supramolecular hybrids with different metal-organic motifs have been synthesized by tuning the solvents, which show various adsorption activities for different organic dyes.     

A ladder coordination polymer based on Ca2+ and (4,5‐dicyano‐1,2‐phenylene)bis(phosphonic acid): crystal structure and solution‐state NMR study

The preparation of coordination polymers (CPs) based on either transition metal centres or rare‐earth cations has grown considerably in recent decades. The different coordination chemistry of these metals allied to the use of a large variety of organic linkers has led to an amazing structural diversity. Most of these compounds are based on carboxylic acids or nitrogen‐containing ligands. More recently, a wide range of molecules containing phosphonic acid groups have been reported. For the particular case of Ca²⁺‐based CPs, some interesting functional materials have been reported. A novel one‐dimensional Ca²⁺‐based coordination polymer with a new organic linker, namely poly[[diaqua[μ₄‐(4,5‐dicyano‐1,2‐phenylene)bis(phosphonato)][μ₃‐(4,5‐dicyano‐1,2‐phenylene)bis(phosphonato)]dicalcium(II)] tetrahydrate], {[Ca₂(C₈H₄N₂O₆P₂)₂(H₂O)₂]·4H₂O}_n, has been prepared at ambient temperature. The crystal structure features one‐dimensional ladder‐like _∞¹[Ca₂(H₂cpp)₂(H₂O)₂] polymers [H₂cpp is (4,5‐dicyano‐1,2‐phenylene)bis(phosphonate)], which are created by two distinct coordination modes of the anionic H₂cpp²⁻ cyanophosphonate organic linkers: while one molecule is only bound to Ca²⁺ cations via the phosphonate groups, the other establishes an extra single connection via a cyano group. Ladders close pack with water molecules through an extensive network of strong and highly directional O—H…O and O—H…N hydrogen bonds; the observed donor–acceptor distances range from 2.499 (5) to 3.004 (6) Å and the interaction angles were found in the range 135–178°. One water molecule was found to be disordered over three distinct crystallographic positions. A detailed solution‐state NMR study of the organic linker is also provided.     

Water Stability and Luminescence of Lanthanide Complexes of Tripodal Ligands Derived from 1,4,7‐Triazacyclononane: Pyridinecarboxamide versus Pyridinecarboxylate Donors

A series of europium(III) and terbium(III) complexes of three 1,4,7‐triazacyclononane‐based pyridine containing ligands were synthesized. The three ligands differ from each other in the substitution of the pyridine pendant arm, namely they have a carboxylic acid, an ethylamide, or an ethyl ester substituent, i.e., these ligands are 6,6′,6″‐[1,4,7‐triazacyclononane‐1,4,7‐triyltris(methylene)]tris[pyridine‐2‐carboxylic acid] (H₃tpatcn), ‐tris[pyridine‐2‐carboxamide] (tpatcnam), and ‐tris[pyridine‐2‐carboxylic acid] triethyl ester (tpatcnes) respectively. The quantum yields of both the europium(III) and terbium(III) emission, upon ligand excitation, were highly dependent upon ligand substitution, with a ca. 50‐fold decrease for the carboxamide derivative in comparison to the picolinic acid (=pyridine‐2‐carboxylic acid) based ligand. Detailed analysis of the radiative rate constants and the energy of the triplet states for the three ligand systems revealed a less efficient energy transfer for the carboxamide‐based systems. The stability of the three ligand systems in H₂O was investigated. Although hydrolysis of the ethyl ester occurred in H₂O for the [Ln(tpatcnes)](OTf)₃ complexes, the tripositive [Ln(tpatcnam)](OTf)₃ complexes and the neutral [Ln(tpatcn)] complexes showed high stability in H₂O which makes them suitable for application in biological media. The [Tb(tpatcn)] complex formed easily in H₂O and was thermodynamically stable at physiological pH (pTb 14.9), whereas the [Ln(tpatcnam)](OTf)₃ complexes showed a very high kinetic stability in H₂O, and once prepared in organic solvents, remained undissociated in H₂O.     

Syntheses,structures and characterization of isomorphous CoII and NiII coordination polymers based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole and benzene‐1,4‐dicarboxylate

Careful choice of the organic ligands is one of the most important parameters in the rational design and synthesis of coordination polymers. Aromatic polycarboxylates have been widely used in the preparation of metal–organic polymers since they can utilize various coordination modes to form diverse structures and can act as hydrogen‐bond acceptors and donors in the assembly of supramolecular structures. Nitrogen‐heterocyclic organic compounds have also been used extensively as ligands for the construction of polymers with interesting structures. In the polymers catena‐poly[[[diaquabis{2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole‐κN ³}cobalt(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O ¹:O ⁴] dihydrate], {[Co(C₈H₄O₄)(C₁₂H₁₁N₄)₂(H₂O)₂]·2H₂O}_n , (I), and catena‐poly[[[diaquabis{2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole‐κN ³}nickel(II)]‐μ₂‐benzene‐1,4‐dicarboxylato‐κ²O ¹:O ⁴] dihydrate], {[Ni(C₈H₄O₄)(C₁₂H₁₁N₄)₂(H₂O)₂]·2H₂O}_n , (II), the Co^II or Ni^II ion lies on an inversion centre and exhibits a slightly distorted octahedral coordination geometry, coordinated by two N atoms from two imidazole rings and four O atoms from two monodentate carboxylate groups and two water molecules. The dicarboxylate ligands bridge metal ions forming a polymeric chain. The 2‐[(1H‐imidazol‐1‐yl)methyl]‐6‐methyl‐1H‐benzimidazole ligands coordinate to the Co^II or Ni^II centres in monodentate modes through an imidazole N atom and are pendant on opposite sides of the main chain. The two structures are isomorphous. In the crystal, the one‐dimensional chains are further connected through O—H…O, O—H…N and N—H…O hydrogen bonds, leading to a three‐dimensional supramolecular architecture. In addition, the IR spectroscopic properties, PXRD patterns, thermogravimetric behaviours and fluorescence properties of both polymers have been investigated.     

rac‐3‐Benzoyl‐2‐methylpropionic acid and its organic salts: possibilities of Yang photocyclization in crystals

The analysis of the crystal structures of rac‐3‐benzoyl‐2‐methylpropionic acid, C₁₁H₁₂O₃, (I), morpholinium rac‐3‐benzoyl‐2‐methylpropionate monohydrate, C₄H₁₀NO⁺·C₁₁H₁₁O₃⁻·H₂O, (II), pyridinium [hydrogen bis(rac‐3‐benzoyl‐2‐methylpropionate)], C₅H₆N⁺·(H⁺·2C₁₁H₁₁O₃⁻), (III), and pyrrolidinium rac‐3‐benzoyl‐2‐methylpropionate rac‐3‐benzoyl‐2‐methylpropionic acid, C₄H₁₀N⁺·C₁₁H₁₁O₃⁻·C₁₁H₁₂O₃, (IV), has enabled us to predict and understand the behaviour of these compounds in Yang photocyclization. Molecules containing the Ar—CO—C—C—CH fragment can undergo Yang photocyclization in solvents but they can be photoinert in the crystalline state. In the case of the compounds studied here, the long distances between the O atom of the carbonyl group and the γ‐H atom, and between the C atom of the carbonyl group and the γ‐C atom preclude Yang photocyclization in the crystals. Molecules of (I) are deprotonated in a different manner depending on the kind of organic base used. In the crystal structure of (III), strong centrosymmetric O...H...O hydrogen bonds are observed.     

Core‐Shell Structured Layered Lanthanide‐Organic Complexes with Stilbazolium‐type Dye Encapsulation for Multifunctional Performances

Host‐guest encapsulation of functional organic dye into a porous metal‐organic framework can give rise to the development of new functional materials. In this work, by intercalating the stilbazolium‐type dye (DEAST)I (4′‐diethylamino‐N‐methyl stilbazolium) into four lanthanide layered metal‐organic complexes (Ln‐LMOCs), i. e. {[Ln(BTB)(H₂O)₂]?3(DMF)?2(H₂O)}_n (Ln=La (1), Nd (2), Sm (3), Er (4)), four responsive (DEAST)I@Ln‐LMOC composites have been prepared, serving as multifunctional performance platform. The core–shell structures of (DEAST)I@Ln‐LMOC composites have been fully characterized by IR, UV/Vis, PXRD, SEM, TEM, TGA and ESR. Significantly, after intercalation of dyes, the (DEAST)I@Ln‐LMOC composites exhibit enhanced luminescent sensing properties in detecting Fe³⁺ with much higher water stabilities. The luminescent sensing behavior stems from the fluorescence resonance energy transfer (FRET) from the π‐electron‐rich BTB ligands to the Fe³⁺, and their higher water stabilities are induced by electrostatic interactions and lower porosity. Specially, the characteristic emissions of Sm³⁺ will not be affected after the encapsulation guest dyes, which provide a theoretical guide for the modulation of luminescence devices. Finally, better ion conductivities and diminished photocurrents can be achieved after the embedding of the functional organic dye. In all, the formation of (DEAST)I@Ln‐LMOC composites with core–shell structures can be utilized as a multifunctional platform with good stability.     

Tautomeric behaviour and isotopic multiplets in the 13C NMR spectra of partially deuterated 5‐arylazo‐pyrimidine (1H,3H,5H)‐2,4,6‐triones and 5‐arylazo‐2‐thioxo‐pyrimidine (1H,3H,5H)‐4,6‐diones—evidence for elucidation of tautomeric forms

NMR spectra of the synthesized azo dyes, 5‐arylazo‐pyrimidine (1H,3H,5H)‐2,4,6‐triones (5a–g), 1,3‐dimethyl‐5‐arylazo‐pyrimidine (1H,3H,5H)‐2,4,6‐triones (6a–g), and 5‐arylazo‐2‐thioxo‐pyrimidine (1H,3H,5H)‐4,6‐diones (7a–g) were studied in (CD₃)₂SO (three drops of CD₃OD were added into solutions of the dyes in two different concentrations). All dyes showed intramolecular hydrogen bonding. Dyes 5a–7a showed bifurcated intramolecular hydrogen bonds. Tautomeric behaviours of some of N‐methylated azo dyes (6a‐g) were studied in two different concentrations. The solvent–substrate proton exchange of dyes 5a–d, 6a and 7a–e was examined in presence of three drops of CD₃OD. The dyes which were soluble in (CD₃)₂SO containing CD₃OD showed isotopic splitting (β‐isotope effect) in the ¹³C NMR spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Azidinium-Salze. 25. Mitteilung. Symmetrische Azopyridinon-Farbsalze: Synthese,spektrophotometrische und acidobasische Eigenschaften,Metallkomplex-Bildung und kinetische Untersuchung der Azo-Kupplung

Symmetrical Azopyridinone Dyes: Synthesis, Spectrophotometrical and Acidobasic Properties, Metal-Complex Formation and Kinetical Investigation of the Azo-Dye Formation The 13 substituted symmetrical azopyridinone dyes 2a–n were synthesized and their VIS spectra measured. The pK*_a values of some dyes and of pyridinone coupling components were determined in MeOH/H₂O 64:36. The metal-complex formation of the dyes with Cd²⁺, Zn²⁺, Co²⁺, Ni²⁺, and Cu²⁺ was investigated, and complex-formation constants of the 1:1 complexes were determined in H₂O for 2k (Table 2) and in dimethylformamide/H₂O 1:1 for some other azopyridinone dyes (Table 3). The mechanism of the azo-dye formation was investigated and found to be much more complicated than expected. A mechanism of the coupling reaction was developed (see Scheme 4) and fitted by least-squares calculations.     

Tailoring Coordination Polymers by Substituent Effect: A Bifunctional CoII‐Doped 1D‐Coordination Network with Electrochemical Water Oxidation and Nitroaromatics Sensing

Three Cd^II coordination polymers (CPs) were synthesized with a tripodal ligand N,N‘,N‘ ‘‐tris(4‐pyridinylmethyl)‐1,3,5‐benzenetricarboxamide in combination with three different substituted isophthalic acids with general formulas {[Cd₂( L )(NIP)₂(H₂O)₂].4H₂O}_n, (CP‐ 1 ), {[Cd₂( L )(AIP)₂(H₂O)₂].4H₂O}_n, (CP‐ 2 ) and {[Cd( L )(BIP) (H₂O)].4H₂O}_n, (CP‐ 3 ). The substituent groups on the co‐ligand had profound effect on the network topologies of the corresponding CPs as well as their properties. Out of the three, CP‐ 1 and 2 were found to form 3D networks whereas CP‐ 3 was a 1D linear chain with uncoordinated pyridyl sites. Due to its structural features CP‐ 3 was found to show interesting properties. The 1D CP containing uncoordinated pyridyl site exhibited an excellent ability for doping with Co^II which in turn acts as an efficient water oxidation electrocatalyst with required overpotential of 380 mV for an anodic current density of 1 mA cm^?2. The CP also exhibited luminescence‐based detection of nitroaromatics (LOD: 0.003 mm ) without any significant interference in presence of other organic compounds.