Oxidation of thallium(I) by hexacyanoferrate(III) in aqueous acetic acid

The hexacyanoferrate(III)-thallium(I) reaction in aqueous acetic acid containing large concentrations of hydrochloric acid is considerably accelerated both by hydrogen and chloride ions as well as increasing acetic acid in the medium. The experimental results obey the rate law (1) where β₁ to β₆ are the cumulative stability constants of the species TlCl, TlCl, TlCl, HFe(CN), H₂Fe(CN) and H₃Fe(CN)₆ respectively and k_a and k_b are the rate constants associated with the mono- and di-protonated oxidant species. The main active species are H₂Fe(CN) and TlCl.     

The acetyl radicals CH3CO· and CD3CO· studied by flash photolysis and kinetic spectroscopy

Ultraviolet absorption spectra have been characterized for the acetyl-h₃ and acetyl-d₃ radicals, which were generated by the flash photolysis of the corresponding acetones. The spectra are broad and intense, with values of the extinction coefficient at the respective maxima estimated as: ?CH₃CO(215) = (1.0 ± 0.1) × 10⁴ L/mol·cm and ?CD₃CO(207.5) = (1.0 ± 0.05) × 10⁴ L/mol·cm. Rate constants for the reactions of mutual interaction were estimated as: k = 3.5 × 10¹⁰ L/mol·s and k = 3.4 × 10¹⁰ L/mol·s. Rate constants for the reactions of cross interaction were estimated as: k = 8.6 × 10¹⁰ L/mol·s and k = 5.2 × 10¹⁰ L/mol·s. The related values of the cross interaction ratios k/(kk)^1/2 = 2.6 and k/(kk)^1/2 = 1.6 do not differ significantly from the statistical value of 2. The participation of the radical displacement reactions was estimated in terms of the fractions k/k = 0.38 and k/k = 0.47. Corroborative spectra were obtained from the flash photolysis of methyl ethyl ketone and biacetyl, and the relative rates of the competing primary processes were estimated from the relative peak heights of the acetyl and methyl radicals in each system.     

Kinetic characteristics of chloride-assisted oxidative dealkylation of alkylcobalamins

The recent experiments on the chloride-assisted dealkylation of alkylcobalamins by a variety of oxidants (IrCl, AuCl, Fe(H₂O)₅Cl²⁺, and PtCl), which are scattered in several previous publications, and their general kinetic characteristics are summarized. The kinetic studies are also extended to include the dealkylations of (methylaquo)?3,5,6-trimethylbenzimidazolylcobamide and protonated base-off ethylcobalamin by IrCl (1.0M Cl^?) and by Fe(III) ions at 0.1M Cl^?, and the demethylation of (methylaquo)?3,5,6-trimethylbenzimidazolylcobamide by AuCl (1.0M Cl^?). This extension is in an effort to substantiate the general mechanism which has been previously proposed for these oxidative dealkylations. The general kinetic characteristics are described in terms of a preassociation of the reactants, followed by a rate-determining electron-transfer process to yield the R-B radical, which then undergoes further reactions to produce the products observed. The overall reactions are discussed within the framework of chlorine-bridging inner sphere electron-transfer reactions.     

A kinetic study of the autocatalytic permanganate oxidation of formic acid

The kinetics of the permanganate oxidation of formic acid in aqueous perchloric acid has been studied. The results indicate that this reaction is autocatalyzed by both manganese(II) ion (formed as a reaction product) and colloidal manganese dioxide (formed as an intermediate). The apparent rate constants corresponding to the noncatalytic and autocatalytic reaction pathways are given, respectively, by the following equations The activation energies associated with the true rate constants, ??, ??, ??, ??, ??, and ?? are 37.2, 62.5, 70.9, 52.5, 40.8, and 59.9 kJ mol^?1, respectively. The percentage of the total reaction corresponding to each pathway is given for typical experimental conditions. Mechanisms in agreement with the kinetic data are proposed for the six different reaction pathways observed.     

A pulse radiolysis study of I and (SCN) in aqueous solutions over the temperature range 15–90°C

The extinction coefficients and the decay kinetics of I and (SCN) have been characterized over the 15–90°C-temperature range. The extinction coefficients of I at 385 and 725 nm were determined to be 10,000 and 2560M^?1 cm^?1, respectively, based on the extinction coefficient of (SCN) at 475 nm being equal to 7600M^?1 cm^?1. At these three wavelengths, all extinction coefficients were constant over the temperature range studied. The rate of decay of both I and (SCN) was found to be a function of I^? and SCN^? concentration, respectively, as well as temperature.     

Kinetics and mechanism of acetylacetonate transfer from acetylacetonatomanganese(III) to iron(III) in acetonitrile catalysis and inhibition effects

The reaction between tris(acetylacetonato)magnanese(III) and hexa(N,N-dimethylformamide)iron(III) perchlorate in acetonitrile proceeds in two stages. The first stage corresponds to the reaction of pentacoordinated Fe(DMF) with Mn(acac)₃, and the rate-determining step of the second stage consists mainly in the elimination of a DMF ligand from Fe(DMF) to yield Fe(DMF) which reacts rapidly with the manganese complex. The formation of Fe(DMF) is catalyzed by Mn(acac)₃, this catalytic effect being decreased by manganese products. The rate-determining step for the formation of Fe(acac)₃ is the transfer of the first acetylacetonate to yield Fe(acac)²⁺. The final products of iron depend on the ratio of reactant concentrations. With Mn or Fe in excess, Fe(acac)₃ or Fe(acac)²⁺ are mainly produced.     

Disproportionation-to-combination ratios for cyclohexyl-h11 and -d11 radicals in the gas phase as determined by the radiolysis of water vapor–cyclohexane mixtures

In the radiolysis of water vapor containing small concentrations of cyclohexane, the principal products which account for about 98% of all end products are found to be hydrogen, cyclohexene, and bicyclohexyl. Cyclohexene and bicyclohexyl yields were determined over a range of temperatures (70–200°C), total pressures (50–2400 torr), and total doses (0.15–2.0 Mrad). The disproportionation–combination ratio k/k for c-C₆H₁₁ radicals could be determined as 0.56 ± 0.01 from the ratio of cyclohexene to bicyclohexyl yield. By using c-C₆D₁₂, the ratio k/k for c-C₆D₁₁ radicals is found to be 0.38 ± 0.01. Comparison of the reactivity pattern of C₆H₁₁ and C₆D₁₁ radicals leads to (k)/(k)/(k/k) = 1.47 ± 0.02. The corresponding values for the reactions of c-C₆H₁₁ with c-C₆D₁₁ were also determined.     

Kinetics and thermochemistry of electron attachment to SF6

Thermochemical analysis of the electron capture process of SF₆ leads to a rate constant for the reverse process \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm SF}_6^ - \mathop \to \limits^2 {\rm SF}_6 + e^ -,k_2 = 1.5 \times 10^{13 - 31.4/\theta } {\rm s}^{{\rm - 1}} $\end{document}, where θ = 2.303RT, in kcal/mol. The electron affinity of 32±3 kcal/mol is deduced from the observed bimolecularity of the capture process down to 0.1 torr Ar bath gas and estimated entropies of SF₆ and SF. The capture process is discussed from the view point of the formation of a metastable SF electron (SF₆·e) Langevin complex which appears to have a lifetime of about 2 × 10^?13 s. Curve crossing from the SF₆·e complex to vibrationally excited (SF)* appears to have a normal rate and A factor. This is interpreted to indicate near-resonant coupling between the orbiting electron and the vibronic motions of SF₆, together with similarity in structure of SF₆ and SF. It is shown that the apparent slowness of thermal electron ejection from SF is a result of an unfavorable equilibrium constant rather than a slow rate.     

Consistency of theory and experiment in the ethane–methyl radical system

The thermal decomposition of ethane has been reinvestigated using the single pulse, reflected shock technique. Reflected shock temperatures were corrected for boundary layer-induced nonidealities using the thermal decomposition of cyclohexene as a kinetic standard. The rate constant for the reaction was calculated from the rate of formation of methane under conditions of very low extent of reaction, over a temperature range of 1000–1241 K. Ethane compositions of 1% and 3% in argon at total reaction pressures of 3 and 9 atm were used, and a small pressure dependence of k₁ was observed. An RRKM model is described which gives excellent agreement with this and other recent dissociation and recombination rate constant data in light of a recent revision to the thermochemistry of the methyl radical. In the range of 1000–1300 K an RRKM extrapolated k is given by the expression, log k = 17.2 ? 91,000/2.3RT, while at 298 K the calculation gives log k (l/mol sec) = 10.44, where k is calculated from k and the equilibrium constant.     

Kinetics and mechanism of the reaction of CH3O with NO

The kinetics of the reaction of CH₃O with NO and the branching ratio for HCHO product formation, obtained as Γ_HCHO = (Rate of HCHO formation) / (Rate of CH₃O decay), have been studied using a discharge flow reactor. Laser induced fluorescence has been used to monitor the decay of the CH₃O radical and the build-up of the HCHO product. Overall rate constants and product branching ratios were measured at room temperature over the pressure range of 0.72–8.5 torr He. Three reaction mechanisms were considered which differed in the routes of HCHO formation: (i) direct disproportionation; (ii) via an energized collision complex; or (iii) both reaction routes. It has been shown that data on the pressure dependence of the overall rate constant are not sufficient to distinguish between these mechanisms. In addition, an accurate value of Γ is required. Analysis of the available experimental data provided 0.0 and about 0.1 as the lower and upper limit for Γ, respectively. Since the rate constants derived for CH₃ONO formation were not sensitive to the value assumed for Γ, k = (1.69 ± 0.69) × 10^?29 cm⁶ molecule^?2 s^?1 and k = (2.45 ± 0.31) × 10^?11 cm³ molecule^?1 s^?1 could be derived. The rate constant obtained for formaldehyde formation when extrapolated to zero pressure is k = (3.15 ± 0.92) × 10^?12 cm³ molecule^?1 s^?1. © 1994 John Wiley & Sons, Inc.     

Comparison of the kinetics of cathodic H2 evolution from the unhydrated H3O+ ion and its hydrated form H9O: Frequency factor effects and modes of activation

Experiments are described in which the kinetics of cathodic hydrogen evolution from the unhydrated H₃O⁺ ion in pure CF₃SO H₃O⁺ are compared with those from an aqueous solution of CF₃SO₃H where the proton is mainly in a fully hydrated state as H₉O. From the acid hydrate, which exists mainly as the ionic compound CF₃SOH₃O⁺, rates of H₂ evolution at Ni, Pt, and Hg electrodes, measured at a given overpotential or expressed as exchange current densities, are between about 3.5 and 20 times slower than those from the same electrolyte in dilute (1.0M) aqueous solution. Allowing for the concentration differences in these two types of system and double-layer effects, the rate constants are between about 9.4 and 216 times smaller for the reaction from H₃O⁺ than from H₉O at the above electrodes. The evaluation of apparent heats of activation for H₂ evolution from the two types of proton sources allows ratios of real frequency factors to be calculated for discharge from H₃O⁺ and H₉O. These data have a bearing on the theoretical conclusions regarding proton discharge mechanisms and show that frequency factor effects can be as important as activation energy differences in determining the rates of proton discharge from different proton sources. The results are discussed in terms of current ideas about electron and proton transfer in electrochemical reactions, the state of hydration of H⁺, and the role of discharge from paired CF₃SO and H₃O⁺ ions. In particular, the molecular mechanics of discharge of the proton from the molecular ion H₃O⁺ can be different from that from the fully hydrated H⁺ ion where many more HO- vibrational and librational modes can be involved in the process of activation of the H₉O entity.     

CH bond dissociation energies,isolated stretching frequencies,and radical stabilization energy

An earlier correlation between isolated CH stretching frequencies, v, and experimental CH bond dissociation energies, in hydrocarbons, fluorocarbons, and CHO compounds, is updated. A stabilization energy, E, which reflects only the properties of the radical, is defined by the deviation of a point from the above correlation. E values for a variety of radicals are listed and discussed. In H? C? N and H? C? O compounds E is low or negligible, due to the low v found in these compounds. The conventional definition of E_S then represents a serious misnomer, which distracts attention from the probable source of discrepancies between experimental and ab initio values of DH°(C? H), namely, the parent molecules. Stereo electronic effects concerned with the breaking of CH bonds are predicted in a variety of situations. Some experimental determinations of DH°(C? H), viz., in C₂H₄, HCOOH, CH₃CHO, CH₃NH₂, are considered to be probably in error. Schemes for partitioning energies of atomization into ‘standard’ or ‘intrinsic’ bond energies are criticized.     

Kinetics of acid catalyzed and Ag(I) catalyzed decomposition of peroxodisulfate in aqueous medium

The mechanism of acid catalyzed decomposition of peroxodisulfate, (S₂O) in aqueous perchlorate medium involves the hydrolysis of the species H₂S₂O₈ and HS₂O and the homolysis of the species H₂S₂O₈, HS₂O and S₂O at the O? O bond. The overall rate law when 1.4M > [HClO₄] > 0.1M is The constants k′ and k″ contain the hydrolysis and homolysis rate constants of HS₂O₈^? and H₂S₂O₈, respectively. With added Ag(I), the acid catalyzed and Ag(I) catalyzed reactions take place independently. Ag(I) catalyzed decomposition appears to involve the species AgS₂O (aq).     

Kinetic study of hydroxylamine-bromate ion reaction in acid sulfate solution—a competitive consecutive reaction

A kinetic study of oxidation of hydroxylamine by bromate ion in acid sulfate solution using spectrophotometric and potentiometric methods is reported. Oxidation of hydroxylamine to nitrate is quantitative and followed competitive, consecutive, and auto catalytics steps characterized by induction periods. In the slow rate limiting step, hydroxylamine on reaction with HOBr (k) forms an intermediate I, which further reacts fast with second molecule of HOBr (k) giving nitrite. Nitrite reacts with HOBr (k) yielding the final product nitrate. Nitric acts as an autocatalyst also and its initial addition decreased the induction periods. In excess of hydrogen ion concentration all the reaction steps follow second-order kinetics. All the second-order rate constants are reported and the reaction mechanism is proposed.     

Kinetics of reversible recombination of aromatic C-centered radicals

The kinetics of the reversible recombination of the 2-phenyl- (I), 2-p-methoxyphenyl-(II), and 2-p-nitrophenyl-3-oxo-2,3-dihydrobenzothiophene-2-yl (III) radicals have been investigated. Recombination rate constants of R(I–III) have been determined in different solvents (2k₁ ～ 10⁹ M^?1 s^?1). The rate of reaction (I) with R(I–III) decreases with increasing solvent viscosity η. In the toluene-vaseline oil mixture (2 ? η ? 120 cP) the recombination of R(I–III) is molecular mobility limited. The thermodynamic parameters of reaction (I) have been determined: ΔH⁰ = 20–30 kcal/mol. Activation volumes ΔV for recombination of R(II) have been measured. In n-propanol ΔV is equal to the viscous flow activation volume of the solvent ΔV. In toluene and chloroform ΔV < ΔV. For the last two solvents the activation volumes of the cage reaction have been estimated ΔV = ?(2–3) cm³/mol. Visible-range absorption spectra and ESR spectra have been recorded for R(I–III). The role of cage effect in the reactivity anisotropy averaging of R(I–III) is discussed. The potential of the high-pressure tests for deriving information about the elementary act of a fast bimolecular reaction is considered.     

Recommendations for measuring second-order rate constants and kinetic solvent isotope effects on acid-catalyzed reactions

Kinetic solvent isotope effects (KSIE) were measured for the hydrolyses of acetals of benzaldehydes in aqueous solutions covering the pH (pD) range of 1–6. For p-methoxybenzaldehyde diethyl acetal, k/k = 1.8–3.1, depending on the procedure used to calculate the KSIE and on the pH (pD) range used as the basis for k(k). It is shown that this variation is an experimental artifact, and is a characteristic of KSIE measurements in general. It is recommended that k be calculated from a least-squares fit of data to the equation k_obs = k[L⁺], and that the KSIE be reported as k/k. The limitation remains, however, that the KSIE measured for a variety of substances over quite different pH (pD) ranges may not be comparable to more than ?20%. The source of these observations is discussed in terms of small changes in the activity coefficient ratios (a specific salt effect), including the solvent isotope effect on the activity coefficient ratio [eq. (3)].     

Rate constants for some reactions of free radicals with haloacetates in aqueous solution

The kinetics of the acqueous-phase reactions of the free radicals ·OH, ·Cl, and SO· with the halogenated acetates, CH₂FCOO^?, CHF₂COO^?, CF₃COO^?, and with CH₂ClCOO^?, CHCl₂COO^?, CCl₃COO^? were investigated. Generally, the reactivity decreases with increasing halogen substitution and is in the order k(·OH) > k(SO·) > k(·Cl), but there is no general relation between the effect on reactivity of chlorine and fluorine substitution. © 1995 John Wiley & Sons, Inc.     

The mechanism of O(3P) atom reaction with ethylene and other simple olefins

Reactions of oxygen atoms with ethylene, propene, and 2-butene were studied at room temperature under discharge flow conditions by resonance fluorescence spectroscopy of O and H atoms at pressures of 0.08 to 12 torr. The measured total rate constants of these reactions are K = (7.8 ± 0.6)·10^?13cm³s^?1,K = (4.3 ± 0.4) ± 10^?12 cm³ s^?1, K = (1.4 ± 0.4) · 10^?11 cm³ s^?1. The branching ratios of H atom elimination channels were measured for reactions of O atoms with ethylene and propene. No H-atom elimination was found for the reaction of O-atoms with 2-butene. A redistribution of reaction O + C₂ channels with pressure was found. A mechanism of the O + C₂ reaction was proposed and the possibility of its application to other olefins is discussed. On the basis of mechanism the pressure dependence of the total rate constant for reaction O + C₂ was predicted and experimentally confirmed in the pressure range 0.08–1.46 torr.     

Kinetics and mechanism of oxidation of indole by HSO

Mechanistic studies on the oxidation of indole [IND] by HSO in aqueous CH₃CN medium (80:20 v/v) have been carried out, and the reaction is characterized by the rate law ?d[HSO]/dt = k[IND][HSO]HSO and SO are probably the respective electrophiles in acidic and basic mediums. Nucleophilic attack of the ethylenic bond on the persulfate oxygen is envisaged to explain the reactivity. The reaction fails to initiate polymerization, and a radical mechanism is ruled out. Thermodynamic parameters very much suggest a bimolecular process. No significant catalytic activity is observed for the reaction system in the presence of Ag⁺, Cu²⁺, and heteroaromatic N‐bases. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 46–51, 2007     

Modelling of the homogeneously catalyzed and uncatalyzed pyrolysis of neopentane: Thermochemistry of the neopentyl radical

The mechanism for neopentane (NpH) pyrolysis in the absence and presence of additives isobutene, HCl and HBr, in the temperature range 750–800 K, has been reinvestigated with the aid of computer simulation and sensitivity analysis techniques. With best values assigned to all rate constants in the kinetic chain, a basic mechanism comprising 18 reversible reactions involving 19 atomic, radical, and molecular species has been used to simulate pure neopentane pyrolysis data. Predictions of major and minor product yields provided quantitative agreement with experimental data against which the model was tested. The mechanism was supplemented by additional species and reactions in order to simulate experimental neopentane pyrolysis data in the presence of HCl and HBr additives. An apparent discrepancy between a recent direct measurement of k₅, the rate constant for thermal decomposition of the neopentyl radical [1], and that reported from studies of neopentane pyrolysis in the presence and absence of HCl [2], has been identified as being due to the use of an incomplete mechanism in the latter determination. Simulations of hydrogen halide catalyzed pyrolyses exhibit a high sensitivity to the thermochemical parameters associated with the neopentyl radical (Np). The influence of uncertainties in ΔH(Np) and S(Np) are evaluated and lead to suggested values ΔH(Np) = 8.7 ± 0.8 kcal mol^?1 and S(Np) = 78.8 ± 1.0 cal mol^?1 K^?1. © 1993 John Wiley & Sons, Inc.