Efficient Procedures for 1-Bromo-1,3-Butadiene and 2-Bromo-1,3-Butadiene

Mixtures of Z- and E-1-bromo-1,3-butadiene in which the E- or Z- isomer predominates have been obtained in good yields by treating a mixture of Z- and E- 1,4-dibromo-2-butene (90% Z-isomer) or pure E-1,4-dibromo-2-butene, respectively, with powdered potassium hydroxide in high-boiling petroleum. 2-Bromo-1,3-butadiene was obtained in high yields by stirring a mixture of vinylacetylene, concentrated aqueous hydrogen bromide and copper(I) bromide.     

探讨1,3丁二烯加成反应的机理、规律与应用*

结合2020年山东省高考题1,3丁二烯与HBr加成反应的势能变化示意图,利用学生已学的物质结构知识,适当、适度地介绍共轭效应,引导学生通过分析中间体的稳定性来认识1,2加成和1,4加成这2种加成方式;结合化学反应原理知识,引导学生理解控制温度等条件可以控制2种加成产物的比例;并对该加成反应规律进行了拓展与应用,以期为高中教学提供有益参考。     

Syntheses and Structures of 5-Membered Heterocycles Featuring 1,2-Diphospha-1,3-Butadiene and Its Radical Anion

LGa(P₂OC)cAAC 2 features a 1,2-diphospha-1,3-butadiene unit with a delocalized π-type HOMO and a π*-type LUMO according to DFT calculations. [LGa(P₂OC)cAAC][K(DB-18-c-6)] 3 [K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene radical anion 3 ⋅ ⁻ was isolated from the reaction of 2 with KC₈ and dibenzo-18-crown-6. 3 reacted with [Fc][B(C₆F₅)₄] (Fc=ferrocenium) to 2 and with TEMPO to [L^−HGa(P₂OC)cAAC][K(DB-18-c-6)] 4 [K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene anion 4⁻ . The solid state structures of 2 , 3 K(DB-18-c-6], and 4 [K(DB-18-c-6] were determined by single crystal X-ray diffraction (sc-XRD).     

两种不同晶形的邻羟基苯甲酸钬配合物的合成与晶体结构

合成了两种不同晶形的配合物，其组成分别为［Ｈｏ_２（ｏ－ＨＯＣ_６Ｈ_１ＣＯ_２）_６（Ｈ_２Ｏ）_４］·４Ｈ_２Ｏ及［Ｈｏ（ｏ－ＨＯＣ_６Ｈ４ＣＯ_２）_３·（Ｈ_２Ｏ）_２·２Ｈ_２Ｏ］_ｎ，用Ｘ射线衍射法测定了它们的结构：一种以二聚体形式存在，属三斜晶系（Ⅰ），其中钬离子的配位数为９；另一种呈无限链状聚合结构，属单斜晶系（Ⅱ），钬离子的配位数为８．同时还研究了它们的热分解过程．     

Reactions of Aliphatic Diazo Compounds: III. Reaction of Ethyl Diazoacetate with 1,3-Diarylpropenones

Ethyl diazoacetate adds to 1,3-diarylpropenones in a regioselective fashion to give intermediate 4,5-dihydro-3H-pyrazole derivative; 1,3-hydride shift in the latter leads to formation of isomeric ethyl 4-aryl- 5-aroyl-4,5-dihydro-1H-pyrazole-3-carboxylate and ethyl 4-aryl-3-aroyl-4,5-dihydro-1H-pyrazole-5-carboxylate at a ratio of 5:1. Thermolysis of these products is not stereospecific; as a result, three isomeric substituted ethyl cyclopropanecarboxylates and 2-pyranone derivative are formed.     

The Reaction of N-Oxide with Ethyl Bromoacetate

The reaction of 4-methoxypyridine 1-oxide with ethyl bromoacetate was found to produce a high yield of ethyl glyoxylate, trimethylamine N-oxide and pyridine 1-oxide also afforded the glyoxylate but in lower yield in the reaction, and 4-nitropyridine 1-oxide was found to be inactive with bromoacetate. Pyridine 1-oxide and trimethylamine N-oxide exhibit the same stoichiometry, while 4-methoxypyridine 1-oxide follows a different course.     

The Reaction of Ethyl Bromoacetate with Dimethyl Sulfoxide

The reaction of excess dimethyl sulfoxide with ethyl bromoacetate has been shown to produce ethyl glyoxylate, hydrogen bromide, and dimethyl sulfide. The yield of glyoxylate at first was reduced because the dimethyl sulfide reacted with bromoacetate to form trimethylsulfonium bromide and ethyl (methylmercapto) acetate, presumably via carbethoxymethyldimethylsulfonium bromide. These side reactions were diminished in a thin-film reactor, but the result was not satisfiable, the yield was 51%, and the side reactions were prevented by addition of methyl bromide, which rapidly consumed the dimethyl sulfide with formation of trimethylsulfonium bromide. Addition of 1, 2-epoxy-3-phenoxypropane removed the hydrogen bromide, thereby preventing the deleterious effects casued by its reduction of dimethyl sulfoxide to dimethyl sulfide. In this way has been developed a convenient preparation of ethyl glyoxylate in yields averaging about 70%. Identification and stoichiometry of the reaction products are presented.     

1, 3-丁二烯热裂解的动力学计算与模型研究

1, 3-丁二烯是碳氢燃料燃烧和裂解过程中生成的一种重要产物,也是形成多环芳烃(PAHs)的一种重要前驱体。目前,关于1, 3-丁二烯燃烧实验以及机理的研究较多,但是其热裂解机理的研究较少。本文在B3LYP/CBSB7水平下对1, 3-丁二烯裂解过程中相关反应的反应物、产物以及过渡态进行了几何结构优化和频率计算,并通过组合方法CBS-QB3计算得到了单点能和热力学参数。对于紧致过渡态的反应和无能垒反应,分别采用过渡态理论(TST)和可变反应坐标过渡态理论(VRC-TST)计算其高压极限条件下的反应速率常数。计算得到的反应速率常数与已有文献报导的结果吻合较好。通过量子化学计算,对Hidaka等人提出1, 3-丁二烯的热裂解机理模型进行了更新和改进:更新后的机理模型包含45个物种和224步反应,并对更新后的机理模型进行了模拟验证。结果表明,更新的机理模型能更好地预测1, 3-丁二烯激波管裂解实验过程中C₂H₂、1-丁烯-3-炔(C₄H₄)以及苯(C₆H₆)主要产物的浓度分布,为进一步完善核心机理(C₀-C₄)模型提供了可靠的热、动力学参数。     

卤代-1,3-丁二烯衍生物的合成研究进展

卤代-1,3-丁二烯衍生物是重要的有机合成子, 在构筑环状化合物方面表现出独特的性质, 在功能材料、有机合成等领域有重要的应用价值, 因此其合成方法备受关注. 综述了卤代-1,3-丁二烯衍生物的合成方法, 并展望了其应用前景.     

Syntheses based on norfluorocurarine. 6. Reaction with phenylhydrazine

The indole alkaloid norfluorocurarine was reacted with phenylhydrazine. An x-ray crystal structure analysis found that the phenylhydrazine was bonded through its N atoms to C2 and C17 and that the N1–C2 bond of the indole core was cleaved to form an NH₂ group and a water molecule was released.     

Reaction of Iodolevoglucosenone with Ethyl Cyanoacetate under Michael Reaction Conditions

The reaction of iodolevoglucosenone with the anion of ethyl cyanoacetate via succession of tandem intramolecular reactions leads to formation of tricyclic cyclopropanolevoglucosenone or tetracyclic imine.     

杯芳烃钕配合物均相体系催化丁二烯聚合

应用新型配体杯芳烃钕配合物与三异丁基铝以及添加Al(i-Bu)₂Cl为第三组分构成二元、三元均相催化体系催化丁二烯聚合.研究结果表明,对于杯[6,8]芳烃钕(C[n]Nd_xCl_y)/Al(i-Bu)₃/汽油体系,当n(Al)/n(Nd)=40～100,50℃时具有中等催化聚合活性,所制得聚丁二烯的粘均分子量为1×10⁵～2×10⁵,顺-1,4结构含量为89%左右,添加适量Al(i-Bu)₂Cl能提高催化活性.杯芳烃钕(C[n]Nd)构成的三元体系在n(Al)/n(Nd)=30,n(Cl)/n(Nd)=1～3时不同杯芳烃的活性次序为:C6>C4>C8     

钯催化 1,3-丁二烯羧酯化合成 3-戊烯酸甲酯

 以 1,3-丁二烯、CO 和甲醇为原料, 进行羧酯化反应合成 3-戊烯酸甲酯是 Altam 路线生产己内酰胺绿色工艺的关键步骤. 将 Pd 与三齿 N-杂环配体或双膦配体组成的催化体系用于 1,3-丁二烯的羧酯化反应中, 其中乙酸钯/2,6-二 (3,5-二甲基吡唑基) 吡啶催化剂表现出中等的催化活性, 在 150 ºC, p(CO) = 6.0 MPa 的优化条件下反应 6 h, 1,3-丁二烯转化率为 78.8%, 3-戊烯酸甲酯选择性达 92.2% (TON = 226); 而乙酸钯/2,2?-二 (二苯基膦基) 苯醚催化体系的活性更高, 在优化反应条件下, 1,3-丁二烯转化率达 90.4%, 3-戊烯酸甲酯选择性为 91.6% (TON = 181). 在 200 ºC 及类似的羧酯化反应条件下, 1,3-丁二烯发生二聚反应, 其转化率为 99% 以上, 二聚产物 4-乙烯基-1-环己烯选择性高于 96%.     

Reaction of 1,3-Dibromo- and 1,3-Dichloroacetone with 2-Aminoazaheterocycles

The reactions of 1,3-dibromoacetone with 2-aminoazines and 2-aminoazoles has been carried out for the first time and the pure intermediate quaternary salts have been isolated. They undergo cyclization to the corresponding imidazoazines and imidazoazoles containing a bromomethyl group. Similar condensations were carried out with 1,3-dichloroacetone.     

Anomalous Reaction of Ethyl Bromofluoro- and Difluoro-Acetates with Dialkylphosphonites

The Michaelis–Arbuzov reaction of ethyl α -bromo-α -fluoro- and α, α -difluoro-acetates with dialkyl phenylphosphonites leads to the formation of unusual products including a fluorophosphinate. The reaction of ethyl bromofluoracetate with diisopropyl- and dimethyl-phenylphosphonites furnishes a complex mixture of eight and five compounds respectively. Five different compounds are obtained when ethyl bromodifluoroacetate is reacted with diisopropyl phenylphosphonite. Dimethyl phenylphosphonite yields three compounds when heated with bromochloromethane. The probable mechanism of formation of the compounds and their mass spectral characterization using GC-MS, tandem MS-MS and DART? techniques are presented in this paper.