1-Phenyl-1-halo-1-silacyclohexanes

The approaches to synthesis of 1-phenyl-1-halo-1-silacyclohexanes C₅H₁₀Si(Ph)X (X = F, Cl, Br) have been examined. 1-Phenyl-1-chloro-1-silacyclohexane has been prepared via the known reaction of phenyltrichlorosilane with dimagnesium derivative of 1,5-dibromopentane; up to 20% of 1-bromo-1-phenyl-1-silacyclohexane admixture is formed along with the target product. The minor product formation has been prevented using an alternative method of chlorination of 1-phenyl-1-silacyclohexane with N-chlorosuccinimide. 1-Phenyl-1-fluoro-1-silacyclohexane has been obtained in close to quantitative yield via the reaction of 1-phenyl-1-chloro-1-silacyclohexane with SbF₃ and in 70% yield via its reaction with HF. The synthesis of 1-phenyl-1-bromo-1-silacyclohexane via bromination of 1-phenyl-1-chloro-1-silacyclohexane with N-bromosuccinimide has given the target product as a minor one, the major product being disiloxane formed due to hydrolysis of the Si–Br bond.     

Synthesis and characterization of 1-methyl-1-silaindane and 1-methyl-1-germaindane

New synthetic routes to 1-methyl-1-silaindane (1b) and 1-methyl-1-germaindane (1b) were developed and the desired products were obtained in good isolated yield. Compounds 1a and 1b were fully characterized by mass spectroscopy, ¹H and ¹³C{¹H} NMR, and infrared spectroscopy.     

The mechanism of thermal dehydrochlorination. Pyrolysis of 1-Chloro-1-fluoroethane and 1-chloro-1, 1-difluoroethane

The thermal decompositions of 1-chloro-1-fluoroethane and 1-chloro-1,1-difluorethane at atmospheric pressure have been studied in the temperature range 500–600°C in a flow system. The dehydrochlorinations are homogenous in a carbonaceous reactor and unimolecular. The rate constants are given by and The criteria for molecular or chain processes in thermal dehydrochlorinations are discussed.     

1-乙酰胺基丙叉-1,1-二膦酸和1-丙酰胺基乙叉-1,1-二膦酸与碱土金属离子的螯合作用

用pH电位法研究了1-乙酰胺基丙叉-1,1-二膦酸(S-186)和1-丙酰胺基乙叉-1,1-二膦酸(S-106)与碱土金属的螯合作用(30±O.1℃).当金属离子与配体的摩尔浓度比为10∶1、1∶1和1∶2时,在水溶液中形成了MHL、ML、ML_2和M_2L等几种类型的配合物.分别测定了它们的稳定常数,其中S-186配合物稍高于S-106,说明配合物稳定性与螯合剂的碱度有平行关系.值得注意的是,这两种螯合剂与Sr~(2 )形成的双核配合物的稳定性均较其它碱土金属离子的为高.     

1, 1-Difluoro-1H-cyclopropa[a]naphthalene

1, 1-Difluorocyclopropa[a]naphthalene ( 1b ) is prepared in three steps from 4-bromo-1,2-dihydronaphthalene ( 7 ) via carbene addition, benzylic bromination and bidehydrohalogenation. Structural evidence for formation of 1b is based on ¹H- and ¹⁹F-NMR spectroscopy. Compound 1b is stable in solution at ?30°. Upon reaction with MeOH/H⁺ it is converted to a 1:2 mixture of 1- and 2-methylnaphthoate ( 10 and 11 , respectively).     

1-Chlor-1-phosphirane

The title compounds are prepared by reaction of disubstituted diazomethanes with 1-chloro-2-phenyl-2-trimethylsilyl-1-phosphaalkene. The chemistry of the 1-chloro-1-phosphiranes is described.     

Nuclear-substituted 1-phenyl-1-methyl-1-silacyclobutane derivatives

Conclusions The synthesis of some nuclear-substituted derivatives of 1-phenyl-1-methyl-1-silacyclobutane by the reaction of 1-methyl-1-chloro-1-silacyclobutane with the appropriate arylmagnesium bromides was described.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1686–1688, July, 1978.     

1:1 alternating copolymers of 1-bicyclobutanecarbonitrile with styrene

High molecular weight, 1:1 alternating copolymers of 1-bicyclobutanecarbonitrile with styrene were prepared in tetramethylenesulfone solution by complexing the electron-poor bicyclobutane monomer with zinc chloride. Methyl 1-bicyclobutanecarboxylate under these conditions gave copolymers containing a slight excess of styrene units (ratio 1:1.3 to 1:1.8). High molecular weight homopolymers of 1-bicyclobutanecarbonitrile and of methyl 1-bicyclobutanecarboxylate were prepared similarly. The tendency of the bicyclobutane nitrile to form 1:1 alternating copolymers is as great as that of its vinyl analog, acrylonitrile, and the synthesis of other alternating copolymers from this monomer should be possible.     

1-Methyl-1-ethynylsilacyclopentane

Conclusions We synthesized 1-methyl-1-ethynylsilacyclopentane, which is the first reported 1-ethynylsilacycloalkane. The reactivities of this silahydrocarbon and its magnesium bromide derivative were studied.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1403–1406, June, 1987.     

Solution conformations of mycothiol bimane, 1-D-GlcNAc-alpha-(1 --> 1)-D-myo-Ins and 1-D-GlcNAc-alpha-(1 --> 1)-L-myo-Ins

Mycothiol is an abundant small molecular weight thiol found only in actinomycetes, which include mycobacteria. Mycothiol biosynthetic and detoxification enzymes are novel and unique to actinomycetes, thereby representing potential antimycobacterial targets. To better guide inhibitor design, we have determined by NMR the solution conformations of mycothiol bimane (MSmB) and the pseudodisaccharide 1-D-GlcNAc-alpha-(1 --> 1)-D-myo-Ins (D-GI), molecules that represent the natural substrates for the mycothiol-dependent detoxification enzyme mycothiol-S-conjugate amidase (MCA) and the mycothiol biosynthetic enzyme D-GlcNAc-alpha-(1 --> 1)-D-myo-Ins deacetylase (AcGI deacetylase), respectively. Comparison of the mean structure of MSmB and the energy-minimized structures of two competitive spiroisoxazoline-containing MCA inhibitors shows striking similarities between these molecules in the region of the scissile amide bond of MSmB and provides structural evidence that those inhibitors are substrate mimics. Owing to our earlier finding that AcGI deacetylase will not deacetylate the unnatural isomer 1-d-GlcNAc-alpha-(1 --> 1)-L-myo-Ins (L-GI), the solution conformation of L-GI was also determined. The interglycosidic bond angles for all three compounds are comparable. When considered together with the observation that a simplified cyclohexyl thioglycoside mycothiol analogue is a good substrate for MCA, it appears that the stereochemistry of the inositol ring is critical for deacetylase function, superceding the importance of the full complement of hydroxyl groups on the "nonreducing" ring.     

1-甲基-1-乙氧基-1-烷硫基甲烷类化合物的合成研究

本文以乙缩醛和烷基硫醇为原料,在30－35℃于四氯化碳中反应20min左右,分别合成1－甲基－1－乙氧基－1－烷硫基甲烷,经红外光谱,质谱以及核磁共振谱检测,确证了产物结构。     

Gas permeability and stability of poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) membranes

A significant reduction in the gas permeability of the poly(1-trimethylsilyl-1-propyne) (PMSP) membrane was investigated in terms of the membrane thickness and the storage environment. The effects of physical aging were observed with thinner membranes and under vacuum conditions compared with storage in air. The decrease in the permeability coefficient was dependent on the decrease in the hole saturation constant of Langmuir adsorption (C'_H), which is related to the volume of the microvoids. Physical aging in the PMSP membrane affected not only the glassy domain but also the rubbery one. To stabilize the permeability of the PMSP membrane, a poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) [poly(TMSP-co-PP)] membrane was prepared. Poly(TMSP-co-PP) has the same unit of poly(1-phenyl-1-propyne), which membrane has stable permeability. The poly(TMSP-co-PP) with less than 20 mol % PP content was estimated to be a random copolymer based on theoretical gas permeation analysis. In the poly(TMSP-co-PP) membrane, the relation between the PP content and C'_H was similar to the relation between the PP content and the gas permeability. The stability of the permeability was dependent on the PP content. The poly(TMSP-co-PP) membrane containing 10 mol % PP had both high permeability and good stability under some of the aging conditions performed in this work. © 1995 John Wiley & Sons, Inc.     

VICINAL DIBROMO-1-HYDROXYPHOSPHOLANE 1-OXIDES

Abstract

2,3-Dibromo-1-hydroxyphospholane 1-oxide and 3,4-dibromo-1-hydroxyphospholane 1-oxide were prepared in high yield by bromine addition to 1-hydroxyphosphol-2-ene 1-oxide or 1-hydroxyphosphol-3-ene 1-oxide, respectively. Both compounds were characterized by ¹H, ³¹P and ¹³C nmr, IR, Laser Raman and mass spectrometry.     

1H AND 13C NMR SPECTRA OF 1-DEOXY-1-THIOGLYCOPYRANOSIDES

Abstract

In the absence of previous systematic investigations, we have embarked on the study of the NMR spectra of thioglycosides, as we needed structural information in connection with our work on the spectroscopic properties of these compounds. In this sommunication, data will be presented on alkyl α - and β-thiogluco- and -thiogalactopyranosides and some related compounds, including certain natural products like lincomycin, sinigrin, and glucocapparin. The ¹H spectra of the strongly coupled carbohydrate portion can readily be analyzed at 270 MHz in the case of the thiogalactosides, whereas the spectrum of the thioglucose moiety in, e.g., thioglucose sodium salt, remains a system of higher order even at 360 MHz, giving rise to multiple lines and virtual coupling. The assignment of the ¹³ spectra proceeded basically via selective or via frequency dependant off-resonance heteronuclear double resonance experiments at 68 MHz; the C-H coupling pattern (triplet) directly reveals the position of C-(6). Application of the increment method of the ¹³C chemical shift in connection with the thioalkyl grouping presented no complications. Tetraacetylation of the thioglycosides shifts the ring ¹³C resonances in a systematic manner and is, therefore, an additional aid. All the compounds investigated adopt the ⁴C₁ conformation; in the α-series, ³J(H-1/H-2) = ca. 5.5 Hz, i.e., relatively large. Long range ¹³C- ¹H coupling constants were measured in a few cases only. Values of ¹J (¹³C- ¹H) were also obtained from satellite lines in the appropriate high-field ¹H spectra. From the spectra of the fully or partly analyzed compounds rules can be deduced that are especially helpful in the examination of ¹³C spectra of other thioglycosides, employing, e.g., chemical shift data, coupling constants, and T₁ data.