Effects of proton donors on the electrochemical reduction of benzo[c]cinnoline in acetonitrile

The polarographic behaviour of benzo[c]cinnoline in acetonitrile in the presence of various proton donors (water, phenol, benzoic acid and perchloric acid) is reported. In aprotic medium benzo[c]cinnoline is reduced in two one-electron waves, followed by one two-electron wave. The most probable final reduction product is 2,2′-diaminobiphenyl. The addition of proton donors causes a shift and/or appearance of new polarographic waves, which can be related to the reduction of various protonated species.     

The synthesis of benzo[c]cinnoline 5,6-dioxides and related compounds

The preparation of a variety of benzo[c]cinnolines as well as benzo[c]cinnoline monoxides and dioxides by reduction of the corresponding 2,2-dinitrobiphenyls with hydrogen and Raney nickel of low activity is described. The detailed procedures developed produce superior yields of benzo[c]cinnoline monoxides and dioxides. The structure of some intensely-colored red-violet amino, alkylamino, and hydroxybenzo[c]cinnoline monoxides and dioxides is discussed and these are compared with the essentially colorless alkoxyl and acetylamino derivatives. The long wave length band in the U. V. spectrum of the colored compounds is compared.     

The chemistry of 2H-3,1-benzoxazine-2,4(1H)-dione (Isatoic Anhydride). 19. Direct formation of 2-aminobenzyl alcohols from the reduction of N-substituted isatoic anhydrides

Isatoic anhydrides 1 are easily reduced with sodium borohydride to o-(substituted-amino)benzyl alcohols 3 in good yield. Sequential reduction of N-(2-nitrobenzyl)isatoic anhydride ( 5 ) with sodium borohydride followed by catalytic hydrogenation of the nitro group affords the naturally occurring 2-(2′-aminobenzylamino)-benzyl alcohol ( 4 ) in 72% yield.     

Investigations of a novel process to the framework of benzo[c]cinnoline

A novel synthetic process leading to the framework of benzo[c]cinnoline has been discovered and investigated. The process is composed of two separate reactions, the first of which is a partial reduction of the nitro groups of the 2,2'-dinitrobiphenyl, a process that we believe proceeds via a SET mechanism to yield the hydroxyamino and nitroso groups. In the following step the cyclization takes place under formation of the -N=N- bond. We believe that this process take place via a radical mechanism through the nitroso radical anion. The novel process affords either benzo[c]cinnoline or benzo[c]cinnoline N-oxide, both in high yields, 93% and 91%, respectively. To obtain benzo[c]cinnoline, the reaction is conducted with an alcohol as solvent and an alkoxide as the base, while for benzo[c]cinnoline N-oxide, water is used as solvent with sodium hydroxide as the base. To establish the latter procedure, statistical experimental design and multivariate modeling were utilized to reveal the response surface for the reaction and to determine the optimal conditions for the reaction. A proposal for the complex reaction mechanism is given. During the corroboration of the mechanism, a new deoxygenation reaction for converting benzo[c]cinnoline N-oxide into benzo[c]cinnoline was discovered. The reaction is conducted by treating the N-oxide with sodium ethoxide at elevated temperature to achieve near-quantitative conversion into benzo[c]cinnoline in a yield of 96%.     

Synthesis and Structure–Property Relationships of 2,2′‐Bis(benzo[b]phosphole) and 2,2′‐Benzo[b]phosphole–Benzo[b]heterole Hybrid π Systems

The first comprehensive study of the synthesis and structure–property relationships of 2,2′‐bis(benzo[b]phosphole)s and 2,2′‐benzo[b]phosphole–benzo[b]heterole hybrid π systems is reported. 2‐Bromobenzo[b]phosphole P‐oxide underwent copper‐assisted homocoupling (Ullmann coupling) and palladium‐catalyzed cross‐coupling (Stille coupling) to give new classes of benzo[b]phosphole derivatives. The benzo[b]phosphole–benzo[b]thiophene and ‐indole derivatives were further converted to P,X‐bridged terphenylenes (X=S, N) by a palladium‐catalyzed oxidative cycloaddition reaction with 4‐octyne through the C_β? H activation. X‐ray analyses of three compounds showed that the benzo[b]phosphole‐benzo[b]heterole derivatives have coplanar π planes as a result of the effective conjugation through inter‐ring C? C bonds. The π–π* transition energies and redox potentials of the cis and trans isomers of bis(benzo[b]phosphole) P‐oxide are very close to each other, suggesting that their optical and electrochemical properties are little affected by the relative stereochemistry at the two phosphorus atoms. The optical properties of the benzo[b]phosphole–benzo[b]heterole hybrids are highly dependent on the benzo[b]heterole subunits. Steady‐state UV/Vis absorption/fluorescence spectroscopy, fluorescence lifetime measurements, and theoretical calculations of the non‐fused and acetylene‐fused benzo[b]phosphole–benzo[b]heterole π systems revealed that their emissive excited states consist of two different conformers in rapid equilibrium.     

Synthesis of bridgehead nitrogen heterocycles

Reductive cyclizations of N-[2-(2-pyridyl)ethyl]imides were accomplished by employing a palladium on carbon catalyst in ethanolic acetic acid as the hydrogenation medium. Reduction of the corresponding N-[2-(2-quinolyl)ethyl]imides ceased at the 1,2,3,4-tetrahydroquinolyl stage. Controlled reduction of the tetrahydroquinolyl imides with sodium borohydride gave amido alcohols which afforded bridgehead nitrogen heterocycles upon cyclodehydration.     

Reduction of olefins,nitroarenes and Schiff base compounds by a polymer-supported [2-(2′-pyridyl)benzimidazole]palladium complex

2-(2′-Pyridyl)benzimidazole (PBIMH) was functionalized onto chloromethylated polystyrene beads crosslinked with 6.5 % divinylbenzene, and this solid support was then reacted with Na₂PdCl₄ in methanol. The functionalized beads were then activated using sodium borohydride. The resultant polymer-supported [2-(2′-pyridyl)benzimidazole]palladium complex (PSDVB–PBIM–PdCl₂) and its activated form were characterized by various physicochemical techniques. XPS studies confirmed the +2 oxidation state of palladium in the supported complex. The activated complex was found to catalyse the hydrogenation of various organic substrates including olefins, nitro and Schiff base compounds. Kinetic measurements for the hydrogenation of cyclopentene, cyclohexene and cyclooctene were carried out by varying temperature, catalyst and substrate concentration. The energy and entropy of activation were evaluated from the kinetic data. The catalyst showed an excellent recycling efficiency over six cycles without leaching of metal from the polymer support, whereas the unsupported complex was unstable as metal leached out into the solution during the first run.     

Chemical constitution and activity of bipyridyliium herbicides. Part VIII. 4-Bromo-6,7-dihydrodipyrido[1,2-α:2′,1′-c]-pyrazinediium dibromide and related compounds

6-Chloro-2,2′-bipyridyl reacts with sodium alkoxides to afford the corresponding 6-alkoxy-2,2′-bipyridyls, which form 6,7-dihydro-4-oxodipyrido[1,2-a:2′,1′-c]pyrazinium bromide on treatment with 1,2-dibromoethane. 6-Chloro-2,2′-bipyridyl with this reagent gives 4-bromo-6,7-dihydrodipyrido[1,2-a:2′,1′-c]pyrazinediium dibromide.     

Characterization of a 2‐Benzo[c]cinnoline Modified Glassy Carbon Electrode by Raman Spectroscopy,Electrochemical Impedance Spectroscopy,and Ellipsometry

This work describes the characterization of the grafted 2‐benzo[c]cinnoline (2BCC) molecules at a glassy carbon (GC) electrode surface by voltammetry and spectroscopy. Attachment of the molecule to the carbon substrate was achieved by the electrochemical reduction of 2‐benzo[c]cinnoline diazonium salt (2BCC‐DAS). GC electrode modification was carried out in aprotic solution with 2BCC diazonium salt. Dopamine (DA) and ascorbic acid (AA) were used to prove the surface modification to see the blockage of the electron transfer. The presence of 2BCC at the GC electrode surface was characterized by cyclic voltammetry and Raman spectroscopy. Raman spectroscopy was used to monitor molecular bound properties of the adsorbates at the 2BCC‐GC surface and confirm the attachment of 2BCC molecules onto the GC surface. The thickness of the 2BCC film on GC was also investigated by ellipsometric measurement.     

Syntheses and modifications of bisdiazonium salts of 3,8-benzo[c]cinnoline and 3,8-benzo[c]cinnoline 5-oxide onto glassy carbon electrode and the characterization of the modified surfaces

The goal of this study was to prepare novel glassy carbon electrode surfaces using two similar bis-diazonium salts, 3,8-benzo[c]cinnoline (3,8-BCC-BDAS) and 3,8-benzo[c]cinnoline 5-oxide (3,8-BCCNO-BDAS) at the glassy carbon (GC) surface. These diazonium salts were reduced electrochemically and covalently electrografted onto the glassy carbon electrode surface to form modified electrodes. Electrochemical reduction of 3,8-BCC-BDAS and 3,8-BCCNO-BDAS salts on the electrode surface yielded a compact and stable film. The existence of BCC moieties on the GC surface was characterized by X-ray photoelectron spectroscopy, reflectance-adsorption infrared spectroscopy, cyclic voltammetry, ellipsometry, and electrochemical impedance spectroscopy. The stability and working potential range of the novel modified electrodes were also studied. The possibility of analytical application of these novel surfaces for inorganic cations and especially selectivity to copper ions was investigated. 3,8-diaminobenzo[c]cinnoline (3,8-DABCC) and its 5-oxide derivative (3,8-DABCCNO) were synthesized from the reductive cyclization of 2,2′-dinitrobenzidine and prepared their bisdiazonium salts via the tetrazotization reactions of the diamines with NaNO₂. The structures of 3,8-DABCC and 3,8-DABCCNO and their corresponding bisdiazonium salts are confirmed by spectral analysis.     

Selective Reduction of Nitro Compounds With Titanium(II) Reagents

The reduction of nitro compounds to amines, an important syntheticre action, is us ually accomplished by means of catalytic hydrogenation,¹ metal and acids, reduction with hydridereayents and sulfurated sodium borohydride.⁶ A feu, attemptsat the reduction of ni tro group susing transition metal chloridesin the presence of sodium borohydride have also been reported.⁷     

Palladium‐Catalyzed Synthesis of Benzophenanthrosilines by C−H/C−H Coupling through 1,4‐Palladium Migration/Alkene Stereoisomerization

A new and efficient synthesis of 8H‐benzo[e]phenanthro[1,10‐bc]silines from 2‐((2‐(arylethynyl)aryl)silyl)aryl triflates under palladium catalysis has been developed. The reaction mechanism was experimentally investigated and a catalytic cycle involving C?H/C?H coupling through a new mode of 1,4‐palladium migration with concomitant alkene stereoisomerization is proposed.     

Hydrogenation of substituted nitroarenes by a polymer-bound palladium(II) Schiff base catalyst

The catalytic activity of a polymer-bound palladium Schiff base catalyst was investigated toward the reduction of aryl nitro compounds under ambient temperature and pressure. The dependence of the rate of hydrogenation of o-nitroaniline and o-nitrotoluene on substrate concentration, catalyst concentration and temperature has been determined. Based on the results obtained a plausible mechanism for the hydrogenation reaction is proposed and a rate expression is deduced. The energy and entropy of activation have been evaluated from the kinetic data. The polymer-bound catalyst was found to be better than its homogeneous analog PdCl₂(NSBA) [NSBA = N-salicylidene benzylamine] for both stability and reusability. Recycling studies revealed that the catalyst could be used six times without metal leaching or significant loss in activity.     

The Synthesis of Novel Polycyclic Heterocyclic Ring Systems via Photocyclization. 12. Benzo[h]naphtho-[2′,1′:4,5]thieno[2,3-c]quinoline and benzo[f]-naphtho[2′,1′:4,5]thieno[2,3-c]quinoline

The synthesis of two previously unknown heterocyclic ring systems, namely benzo[h]naphtho[2′,1′:4,5]thi-eno[2,3-c]quinoline (1) and benzo[f]naphtho[2′,1:4,5]thieno[2,3-c]quinoline (2) was accomplished via photocyclization of the appropriate amides followed by chlorination and catalytic dechlorination. The total assignment of ¹H and ¹³C nmr spectra of 2 was determined utilizing two-dimensional nmr methods, providing unequivocal structural proof of the two novel polycyclic ring systems.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 9. Phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline,benzo[f]phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline,and benzo[h]-phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline

The synthesis of three novel polycyclic heterocyclic ring systems are reported via photocyclization. The specific final products in these ring systems are: phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline ( 13 ), benzo[h]-phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline ( 14 ), and benzo[f]phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline ( 15 ).     

Synthesis of diimidazo[1,2-a:2′,1′-c]pyrazines and diimidazo[1,2-a:2′,1′-c] [1,4]diazepines

Two new heterocyclic compounds, diimidazo[1,2-a:2′,1-c]pyrazine and 5H-diimidazo[1,2-a: 2,1′-c][1,4]diazepine have been synthesized by various routes from 2,2′-biimidazole (1) (2) together with some hydro, hydroxy and alkyl derivatives.     

5,6-Dihydro-4H-pyrrolo[1,2-a][1,4]benzodiazepine-4,4-diacetic acid diethyl ester,an useful synthon for the synthesis of new polycyclic nitrogen systems of pharmacological interest

This report describes the synthesis of derivatives of two nitrogen tetracyclic ring systems, respectively 9H,11H-pyrimido[4,3-c]pyrrolo[1,2-a][1,4]benzodiazepine and spiro[piperidine-4,4′-[4H]pyrrolo[1,2-a][1,4]-benzodiazepine], by the use of the diethyl ester of 5,6-dihydro-4H-pyrrolo[1,2-a][1,4]benzodiazepine-4,4-diacetic acid as a synthon. This compound was obtained by condensation of 1-(2-aminomethylphenyl)-1H-pyrrole with diethyl 1,3-acetonedicarboxylate in acid medium. Pyrimidopyrrolobenzodiazepine derivatives were obtained by treating either the pyrrolobenzodiazepine 4,4-diacetate or the related 4-methyl-4-acetate with phenylisocyanate in boiling diethyl ether in the presence of sodium metal. The structure of 12,13-dihydro-11,13-dioxo-12-phenyl-9H,11H-pyrimido[4,3-c]pyrrolo[1,2-a][1,4]benzodiazepine, a product formed by loss of an acetate unit when 5,6-dihydro-4H-pyrrolo[1,2-a][1,4]benzodiazepine-4,4-diacetate, sodium metal and phenyl-isocyanate reacted in boiling xylene, was proved by catalytic reduction to 11,13-dioxo-12-phenyl-12,13,14,14a-tetrahydro-9H,11H-pyrimido[4,3-c]pyrrolo[1,2-a][1,4]benzodiazepine, which was synthesized by unambiguous pathway via 5,6-dihydro-4H-pyrrolo[1,2-a][1,4]benzodiazepine-4-acetate. The 2,6-dioxospiro[piperidine-4,4′-[4H]pyrrolo[1,2-a][1,4]benzodiazepine] derivatives were synthesized from the N-BOC derivative of 5,6-dihydro-4H-pyrrolo[1,2-a][1,4]benzodiazepine-4,4-diacetic acid diethyl ester, by hydrolysis followed by treatment with 2 equivalents of 1,1′-carbonyldiimidazole (CDI) and then with aniline or benzylamine. Removal of BOC from the N-phenyl-2,6-dioxopiperidine derivative was obtained by heating the related spiroderivative in toluene in the presence of p-toluenesulphonic acid. Similar reaction failed when the N-benzyl-2,6-dioxopiperidine analog was used as substrate.     

Silver nanoparticles supported on ionic‐tagged magnetic hydroxyapatite as a highly efficient and reusable nanocatalyst for hydrogenation of nitroarenes in water

A novel chemically modified magnetic hydroxyapatite (MHAp) was prepared and used as support and stabilizer for the synthesis of silver nanoparticles. First, 1,4‐diazabicyclo[2.2.2]octane (DABCO) was successfully grafted onto the surface of MHAp, and then silver nanoparticles were homogeneously loaded on mesoporous MHAp‐DABCO (ionic‐tagged MHAp) nanocomposite by in situ chemical reduction of silver nitrate using sodium borohydride. The structure and properties of the resulting MHAp‐DABCO‐Ag nanocomposite were confirmed using various techniques. The catalytic activity of ionic‐tagged MHAp‐Ag nanocatalyst was investigated for the hydrogenation reaction of nitroarenes in aqueous media. The results reveal that the Ag‐containing inorganic–organic nanocomposite is highly efficient for the reduction of a wide range of aromatic nitro compounds under green conditions. The superparamagnetic nature of the nanocatalyst leads to its being readily removed from solution via application of a magnetic field, and it can be easily stored and reused.     

Amperometric Lactate Biosensor Based on Carbon Paste Electrode Modified with Benzo[c]cinnoline and Multiwalled Carbon Nanotubes

Amperometric lactate biosensor based on a carbon paste electrode modified with benzo[c]cinnoline and multiwalled carbon nanotubes is reported. Incorporation of benzo[c]cinnoline acting as a mediator and multiwalled carbon nanotubes providing a conduction pathway to accelerate electron transfer due to their excellent conductivity into carbon paste matrix resulted in a high performance lactate biosensor. The resulting biosensor exhibited a fast response, high selectivity, good repeatability and storage stability. Under the optimal conditions, the enzyme electrode showed the detection limit of 7.0×10^?8 M with a linear range of 2.0×10^?7 M–1.1×10^?4 M. The usefulness of the biosensor was demonstrated in serum samples.     

An Efficient Synthesis of Spiro‐oxindole Derivatives by Three‐Component Reactions in Water

An efficient synthesis of (3S)‐1,1′,2,2′,3′,4′,6′,7′‐octahydro‐9′‐nitro‐2,6′‐dioxospiro[3H‐indole‐3,8′‐[8H]pyrido[1,2‐a]pyrimidine]‐7′‐carbonitrile is achieved via a three‐component reaction of isatin, ethyl cyanoacetate, and 1,2,3,4,5,6‐hexahydro‐2‐(nitromethylidene)pyrimidine. The present method does not involve any hazardous organic solvents or catalysts. Also the synthesis of ethyl 6′‐amino‐1,1′,2,2′,3′,4′‐hexahydro‐9′‐nitro‐2‐oxospiro[3H‐indole‐3,8′‐[8H]pyrido[1,2‐a]pyrimidine]‐7′‐carboxylates in high yields, at reflux, using a catalytic amount of piperidine, is described. The structures were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).