Effect of amines on the ceric ion-initiated polymerization of vinyl monomers. I. Polymerization of acrylonitrile by ceric ion–triethylamine catalyst system

The polymerization of acrylonitrile was studied in aqueous solution with ceric ammonium sulfate in the presence of triethylamine as initiator at 30, 40, and 50°C. The rate of polymerization was found to be linear with the concentration of the amine and independent of ceric ion concentration. A reaction scheme involving initial complex formation between ceric ion and the amine and subsequent disproportionation of the conplex to produce free radicals is proposed for the initiation reaction. The termination step is postulated as involving oxidation of the polymer chains by ceric ions. The results have been explained in the light of the proposed reaction scheme.     

Electroinitiated cationic polymerization of styrene in the presence of ferric chloride

The electroinitiated polymerization of styrene has been studied in acetone with ferric chloride as the electrolyte. At a fixed monomer concentration, the polymer yield depends on the current strength as well as the concentration of ferric chloride. The molecular weight of the polymer lies in the range of 1000–3000. Addition of zinc chloride to the system or replacement of the solvent by DMF (partly or fully) or methanol retards the polymerization. The current exponent of polymerization is unity with a reaction rate constant of 4.416 × 10^?2 reaction percent per hour. The locus of polymerization is the anode compartment. A cationic mechanism has been proposed for the polymerization, the initiating step consisting of an electron transfer from an adsorbed charge transfer complex of styrene and ferric chloride.     

Effect of amines on the ceric ion-initiated polymerization of vinyl monomers. II. Polymerization of acrylonitrile by ceric ion in presence of various substituted amines

The effect of various substituted amines on the polymerization of acrylonitrile initiated by ceric ammonium sulfate has been studied in aqueous solution at 30°C. It was found that the secondary and tertiary amines considerably increased the rate of polymerization, whereas the primary amines seemed to have no effect at all. From the kinetic studies it was found that the overall polymerization rate R_p is independent of ceric ion concentration and can be expressed by the equation: R_p = k₁ [amine] [monomer] + k₂[monomer]², where k₁ and k₂ are constants (involving different rate constants). The accelerating effect of the amines was attributed to a redox reaction between the ceric ion and the amine involving a single electron transfer, the relative activity of the different amines being thus dependent on the relative electron-donating tendency of the substituents present in the amine. The mechanism of the polymerization is discussed on the basis of these results, and various kinetic constants are evaluated.     

Polymerization photoinitiated by carbonyl compounds. X. Methyl methacrylate polymerization photoinitiated by fluorenone in the presence of triethylamine

The photoinitiation efficiency of the fluorenone/triethylamine (TEA) system in the polymerization of methylmethacrylate (MMA) has been evaluated as a function of the monomer concentration, the amine concentration, and the polarity of the reaction medium. The polymerization proceeds readily in low polarity media (benzene/monomer), but it is negligible in more polar solvents (acetonitrile/monomer). The polymerization rate increases with the amine concentration up to 0.01 M TEA. Further increase in amine concentration produces a decrease in the polymerization rate. A similar behavior was observed for the fluorenone photoreduction yield and the yield of fluorenone derived radicals. All these processes are considered to involve the excited triplet, while quenching of the excited singlet by the amine decreases the rate of these processes. However, the decrease in photoinitiation efficiency observed at high amine concentration is larger than that expected from the singlet quenching extent, as estimated from the effect of the amine on the fluorescence yield under the same experimental conditions. This discrepancy indicates that other process(es) must contribute to the protection afforded by high amine concentrations. Quenching of the charge transfer intermediate by the amine is postulated as a competitive process that could explain the above mentioned effects. © 1994 John Wiley & Sons, Inc.     

无水FeCl_3存在下丙烯酸甲酯的单电子转移活性自由基聚合动力学

单电子转移活性自由基聚合(SET-LRP)是一种可以对聚合物进行有效分子设计,合成不同拓扑结构并且能够有效调节其相对分子质量和相对分子质量分布的新型聚合方法,具有潜在的应用前景。以2-溴丙酸甲酯作为引发剂,Cu(0)/三(N,N-二甲基氨基乙基)胺(Me6-TREN)为复合催化体系,通过在二甲基亚砜中添加不同摩尔浓度的无水FeCl_3来研究其对丙烯酸甲酯的SET-LRP聚合动力学的影响。结果表明,随着三价铁离子量的增加,其链增长速率常数下降并且出现诱导期延长现象,说明三价铁离子参与了SET-LRP的聚合动力学过程,它和在同样实验条件下二价铜所起的作用截然不同,这可能是由于三价铁离子的氧化导致反应体系中一价铜的浓度降低引起的。此项工作从另外一个角度解释了零价铜催化下SET-LRP聚合诱导期产生的原因。     

Polymerization of acrylamide and methacrylamide photoinitiated by azidopentamminecobalt(III) chloride

The kinetics of polymerization of acrylamide and methacrylamide, photoinitiated by azidopentamminecobalt(III) chloride in homogeneous aqueous acid medium was studied systematically. Monochromatic wavelengths 365, 405, and 435 mμ were employed for irradiation. Polymerization proceeded without any induction period, and the reaction was followed by measurements of rate of monomer disappearance (bromometrically), rate of complex disappearance (spectrophotometrically), and the chain lengths of the polymer formed (viscometrically). The dependences of the rate of polymerization on variables like light intensity, light absorption fraction by the complex, wavelength, monomer concentration, hydrogen ion concentration, nature of the acid used (HClO₄, HNO₃, and H₂SO₄), etc., were studied. The rate of polymerization of acrylamide depended on the unit power of monomer concentration and on the square root of light absorption fraction k_ε and light intensity I. The rate of methacrylamide polymerization was proportional to the unit power of monomer concentration and fractional powers of 0.25 and 0.30 of k_ε and I, respectively. A kinetic reaction scheme is proposed and discussed in the light of the experimental results, and it has been concluded that (1) the primary photochemical act is an electron transfer reaction from the azide ion to Co(III) in the complex, (2) initiation of polymerization is by azide radical, (3) termination is by mutual destruction of polymer radicals.     

Polymerization of methyl methacrylate with ferric laurate in combination with various substituted amines as initiators

The effect of various substituted amines on the polymerization of methyl methacrylate initiated by ferric laurate—amine as the initiator system has been studied in carbon tetrachloride medium at 60°C. Amines used are n-butyl amine, di-n-butyl amine. The rate of polymerization is found to follow the order: tertiary > secondary > primary amine. From the detailed kinetic studies it was found that the overall polymerization rate can be expressed by the equation: The relative activity of the different amines has been found to be dependent on the relative electron-donating tendency of the substituents present in the amine. The mechanism of the polymerization is discussed on the basis of these results, and various kinetic constants are evaluated.     

Green synthesis of pyrido[2,1-a]isoquinolines and pyrido[1,2-a]quinolins using Fe3O4-MNPs as efficient nanocatalyst: Study of antioxidant activity

In this work, synthesis of pyrido[2,1-a]isoquinolines and pyrido[1,2-a]quinolins in excellent yield using multicomponent reaction of phthalaldehyde, methyl amine, methyl malonyl chloride, alkyl bromides, and triphenylphosphine in the presence of catalytic amount of Fe₃O₄-MNPs with aqueous sodium hydroxide at 80°C was investigated. The reduction of ferric chloride solution with Clover Leaf water extract caused to synthesis of magnetic iron oxide nanoparticles (Fe₃O₄-MNPs) as a green method. As well, antioxidant activity was studied for the some newly synthesized compounds such as 6a , 6c , 9b , and 9c using the DPPH radical trapping and reducing of ferric ion experiments and comparing results with synthetic antioxidants (TBHQ and BHT). As a result, compounds 6a , 6c , 9b , and 9c show good DPPH radical trapping and excellent reducing strength of ferric ion.     

Effect of stoichiometry and diffusion on an epoxy/amine reaction mechanism

The bulk phase kinetics of an epoxy (DGEBA) /amine (DDS) thermoset have been studied using DSC, FTIR, and ¹³C-NMR. In the absence of catalyst, the reaction was found to involve a main exothermic reaction between epoxide and amine hydrogen and a side reaction between tertiary amine formed in the main reaction and epoxide. The main reaction was exothermic while the side reaction had no discernable exotherm. Etherification did not occur to any significant extent. Since only the main reaction is exothermic, DSC was very useful for studying the main reaction kinetics. FTIR was used for determining whether epoxide and amine hydrogen were consumed at different rates as a way of following the side reaction. An IR band previously unused by other investigators was used to monitor the amine hydrogen concentration. NMR confirmed the above mechanism by identifying the formation of a quaternary ammonium ion/alkoxide ion pair as a reaction product of tertiary amine and epoxide. This mechanism has been successfully fit to a rate law valid over the entire extent of reaction. The rate constant for the epoxy/amine addition reaction was found to depend on hydroxide concentration (extent), reaction temperature, and glass transition temperature and included contributions from uncatalyzed and autocatalyzed parts. The side reaction (quaternary ammonium ion formation) formed weak bonds which did not affect the overall system T_g. Both reactions were second order. The rate constants for the main reaction first increase with increasing extent due to autocatalysis by hydroxide before decreasing due to the diffusion limit caused by gelation and vitrification. © 1995 John Wiley & Sons, Inc.     

p-Nitroacetanilide in the presence of triethylamine as a photoinitiator system for vinyl polymerization

The polymerization rate of methyl methacrylate photosensitized by p-nitroacetanilide in the presence of triethylamine was measured as a function of the amine and monomer concentrations. The polymerization proceeds readily in high-polarity media (acetonitrile/monomer) but is negligible in nonpolar media. The polymerization rate increases with the amine concentration up to 0.15M. Further increase in amine concentration does not change the polymerization rate. A similar behavior was observed for the photobleaching of the nitro compound. ESR studies show the formation of a nitro and an amine free radical, the latter free radical being the active species that adds to the monomer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3095–3100, 1997     

Kinetics of polymerization of N-tert-butylacrylamide. Part II

The effect of ferric chloride on the kinetics of the radical polymerization of N-tert-butylacrylamide has been investigated in methanol solution at 25°C, with the use of 4,4′-dicyano-4,4′-azodipentanoic acid as initiator. A shrinkage factor of 0.193 mmole polymerized for 1 mm contraction in a capillary of 1 mm diameter has been obtained from density measurements. In the absence of ferric chloride, rates of polymerization were found to be proportional to the concentration of monomer and to the square root of the initiator concentration. With ferric chloride present, the rate of polymerization becomes directly proportional to the initiator concentration and inversely proportional to the concentration of ferric salt. From measurements of the rates of production of ferrous iron, the specific rate constant of the initiation reaction has been found to be (1.8 ± 0.4) × 10^?6sec^?1 at 25°C, compared with a value of 7.63 × 10^?8 sec^?1 calculated from the kinetic data obtained with no ferric salt present. The value of the ratio k_p/k₄. where k_p is the propagation coefficient and k₄ is the velocity coefficient for termination by ferric chloride, has been calculated to be 6.0 × 10^?4 at 25°C, which is considerably smaller than the value found for the ferric chloride-terminated polymerization of acrylamide in water. This markedly lower value of k_p/k₄ has been attributed principally to the steric effect of the tert-butyl group on the magnitude of k_p.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Polymerization of acrylamide and acrylic acid photoinitiated by diazidotetramminecobalt (III) azide

The kinetics of polymerization of acrylamide and acrylic acid in aqueous solution photoinitiated by the complex, diazidotetramminecobalt(III) was systematically studied at 35°C and pH = 3. Monochromatic radiation at γ = 365, 405, and 435 mμ was employed. The kinetics of polymerization were followed by measurements of the rates of monomer disappearance (bromometrically) and complex disappearance (spectrophotometrically) and the chainlengths of the polymers formed (viscometrically). The dependences of the rate of polymerization on variables like light intensity, light absorption by the complex, wavelength, monomer concentration, and hydrogen ion concentration were studied. The rates of polymerization of acrylamide and acrylic acid were found to be propertional to the square of the monomer concentration and to the first power of light absorption fraction k_e and light intensity I. A kinetic scheme is proposed in the light of experimental results involving (1) a primary photochemical act of excitation of the complex, followed by the dark reaction of electron transfer within the complex producing the azide radical; (2) initiation of polymerization by the azide radical; (3) termination of the chain process by the complex molecule.     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

Aqueous photopolymerization with visible‐light photoinitiators: Acrylamide polymerization photoinitiated with a phenoxazine dye/amine system

We studied the photoinduced electron‐transfer polymerization of acrylamide with, as a visible‐light initiator, the heterocycle‐N‐oxide resazurin in the presence of triethanolamine. The irradiation of resazurin produces resorufin, which also absorbs in the visible region. Both phenoxazine dyes in the presence of the amine are efficient photoinitiators of acrylamide polymerization in an aqueous medium. The polymerization rates were measured at several amine concentrations. These values increase with the amine concentration, reaching a maximum value; further amine addition slightly decreases the polymerization rate. Time‐resolved photolysis studies of the dyes were carried out under the polymerization conditions. The quenching of the dye excited states by the amine was analyzed with static‐fluorescence and laser‐flash photolysis. These data were used for fitting curves of the polymerization rate versus the amine concentration, and it was concluded that the interaction of triplet excited dyes with the amine leads to acrylamide polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4074–4082, 2001     

Kinetics of complex formation of 2‐methoxyphenol with ferric ion and hexacyanoferric ion

Complexes containing one molecule of organic ligand have been formed in the reaction of 2 methoxyphenol with ferric ion or hexacyanoferric ion. Kinetic investigations showed that the reaction order with respect to ferric ion or hexacyanoferric ion is close to one. The reaction order with respect to 2‐methoxyphenol is 0.8 in the reaction with ferric ion and close to 0 in the reaction with hexacyanoferric ion. The reaction mechanism, based on kinetic investigations, involves the decomposition of the initial complex, formed with the pentacoordinated complex and water or cyanide ion. In a second stage of the reaction, the pentacoordinated complex adds 2‐methoxyphenol; and one molecule of initial ligand, water, or cyanide ion, comes off. Some ratios of rate constants of elementary reactions have been calculated. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 184–191, 2000     

Linear polyhydrazides

Linear polyhydrazides have been obtained successfully by heating diphenyl dicarboxylate with 1,6-dihydrazino hexane. The structure of the polymers was established by the N-deuteration method. The resulting polymers have many remarkable characteristics, such as high water-absorption ratio (20–100%), basic character (pK_a = 3.15), the ability to form a metal complex, and the power to initiate vinyl polymerization as a cocatalyst with ferric ion.     

Effects of metal salts on polymerization. Part IV. Polymerization of N-vinylcarbazole initiated by oxidizing metal nitrates

The polymerization of N-vinylcarbazole (VCZ) in ethylene dichloride, acetone, benzene, and dioxane with cupric nitrate, ferric nitrate, and ceric ammonium nitrate as catalyst was studied. In all cases the polymerization seemed to be of a cationic nature, judged by copolymerization with styrene. Electron spin resonance (ESR) spectroscopy was made for the polymerization system and also for a system containing N-ethylcarbazole instead of VCZ. Singlet ESR spectra were observed for all systems containing ceric salt and for some systems containing ferric salt but not for systems containing cupric salt. The ESR spectra indicated the formation of an ion radical by electron transfer between the oxidizing metal salt and the carbazole derivatives. Mechanisms of initiation other than electron transfer were less likely, and it was concluded that the initiation process was most likely to be of the electron transfer type.     

Polymerization of methyl methacrylate with cupric laurate–benzoin system as initiator

The polymerization of methyl methacrylate initiated by cupric laurate in combination with benzoin has been investigated in carbon tetrachloride medium at 60°C. The rate of polymerization was found to be proportional to the square root of both cupric ion and benzoin concentrations, and to the 1.5th power of the monomer concentration. Spectral studies indicated that there is a complex formation between cupric ion and the monomer methyl methacrylate. A reaction scheme, based on initial formation of the complex and its subsequent reaction with benzoin to produce the free radicals responsible for initiation has been postulated to explain the observed results.     

Polymerization of acrylamide initiated with pinacol–ceric ion redox system

Polymerization of acrylamide initiated with a pinacol–ceric ion redox system was investigated. The polymer obtained was found to contain one cerium atom in a polymer molecule. It was considered that the cerium atom was introduced into the polymer molecule by the termination reaction as there is no cerium atom in the initiating radical in the present system. A similar termination reaction was attained by ferric ion but not by cerous ion. The metal ion was considered to terminate the polymerization to form a stable polymer. Some considerations on the structure of the reaction product relating to the polymerization mechanism were discussed.