External magnetic field-induced mesoscopic organization of Fe3O4 pyramids and carbon sheets

The current investigation is centered on the thermal decomposition of iron(II) acetyl acetonate, Fe(C5H7O2)2, in a closed cell at 700 degrees C, which is conducted under a magnetic field (MF) of 10 T. The product is compared with a similar reaction that was carried out without a MF. This article shows how the reaction without a MF produces spherical Fe3O4 particles coated with carbon. The same reaction in the presence of a 10 T MF causes the rejection of the carbon from the surface of pyramid-shaped Fe3O4 particles, increases the Fe3O4 particle diameter, forms separate carbon particles, and leads to the formation of an anisotropic (long cigarlike) orientation of Fe3O4 pyramids and C sheets. The macroscopic orientation of Fe3O4 pyramids+C sheets is stable even after the removal of an external MF. The suggested process can be used to fabricate large arrays of uniform wires comprised of some magnetic nanoparticles, and to improve the magnetic properties of nanoscale magnetic materials. The probable mechanism is developed for the growth and assembly behavior of magnetic Fe3O4 pyramids+C sheets under an external MF. The effect of an applied MF to synthesize morphologically different, but structurally the same, products with mesoscopic organization is the key theme of the present paper.     

PREPARATION AND CHARACTERIZATION OF DOXORUBICIN-LOADED MAGNETIC ANTICANCER NANOPARTICLES

Doxorubicin（ADM）-loaded magnetic anticancer nanoparticles, using Fe3O4 as core, doxorubicin as model drug and polyvinylpyrrolidone （PVP） as matrix, were prepared by inverse emulsion polymerization. The experimental results showed that the average diameter of Fe3O4 particles was 19.8nm. The X-ray diffraction itzdicated that the prepared Fe3O4 particle was pure cubic Fe3O4, The results obtained by SEM showed the magnetic nanoparticles under optimal operating condition had a smooth spherical surface, LLS showed an average size of 78. 7nm. And IR results demonstrated that they consisted of ADM, PVP and Fe3O4.     

Synthesis of thermosensitive microgels with a tunable magnetic core

In this work, we describe a new methodology for the preparation of monodisperse and thermosensitive microgels with magnetic core. In order to produce such a material, hydrophobic magnetic Fe(3)O(4) nanoparticles were prepared by two methods: thermal decomposition and coprecipitation. The surface of these nanoparticles was modified by addition of 3-butenoic acid, and after that these nanoparticles were dispersed in water and submitted to free radical polymerization at 70 °C in the presence of N-isopropylacrylamide (NIPAM) and bisacrylamide. The result of this reaction was monodisperse microgels with a magnetic core. By varying the amount of 3-butenoic acid, it was possible to obtain hybrid microgels with different magnetic core sizes and different architectures.     

Effects of a 10 T external magnetic field on the thermal decomposition of Fe, Ni, and Co acetyl acetonates

The current investigation is centered on the thermal decomposition (700 degrees C) of acetyl acetonates of Ni, Co, and Fe in a closed reactor that was conducted by employing an external magnetic field (MF) of 10T. Interestingly, reactions of Co and Ni acetyl acetonates under a 10T MF produce Co and Ni nanoparticles (NPs) coated with carbon, while Fe acetyl acetonate produces Fe3O4 uncoated with carbon. Additionally, it is observed that all the as-formed magnetic particles tend to align in one dimension along applied MF; thus, this process can be used to fabricate large arrays of magnetic nanoparticles. The effect of an applied MF to synthesize morphologically and compositionally different products from corresponding precursors with their mesoscopic organization is the key theme of the present paper, explained with a plausible mechanism.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

Co~(2+)/Dy~(3+)掺杂纳米立方Fe_3O_4的热还原制备及磁靶向滞留性能

采用热还原沉淀法制备了一系列Co~(2+)/Dy~(3+)掺杂的纳米立方MxFe3-xO4磁性颗粒.利用X射线衍射仪、透射电子显微镜和振动样品磁强计研究了不同含量掺杂离子对MxFe3-xO4晶体结构、形貌及磁性的影响.研究发现,掺杂未改变母体的对称性,但母体形貌逐渐从立方体向球体过渡;Co~(2+)和Dy~(3+)的掺杂对于铁氧体磁学性质的影响明显不同,当Co~(2+)实际掺杂量为0.44和Dy~(3+)实际掺杂量为0.05时,MxFe3-xO4立方磁性粒子的饱和磁化强度(Ms)达到最大值,分别为76.65和70.21 A·m2·kg-1.与超顺磁性Fe_3O_4球体相比,高磁性掺杂Fe_3O_4立方体在体外模拟磁流体磁靶向定位实验中显示出较高的滞留率.     

A new ion-exchange adsorbent with paramagnetic properties for the separation of genomic DNA

A new ion-exchange adsorbent (IEA) derived from Fe(3)O(4)/SiO(2)-GPTMS-DEAE with paramagnetic properties was prepared. Fe(3)O(4) nanoparticles were firstly prepared in water-in-oil microemulsion. The magnetic Fe(3)O(4) particles were modified in situ by hydrolysis and condensation reactions with tetraethoxysilane (TEOS) to form the core-shell Fe(3)O(4)/SiO(2). The modified particles were further treated by 3-glycidoxypropyltrimethoxysilane (GPTMS) to form Fe(3)O(4)/SiO(2)-GPTMS nanoparticles. Fe(3)O(4)/SiO(2)-GPTMS-DEAE nanoparticles (IEA) were finally obtained through the condensation reaction between the Cl of diethylaminoethyl chloride-HCl (DEAE) and the epoxy groups of GPTMS in the Fe(3)O(4)/SiO(2)-GPTMS. The obtained IEA has features of paramagnetic and ion exchange properties because of the Fe(3)O(4) nanoparticles and protonated organic amine in the sample. The intermediates and final product obtained in the synthesis process were characterized. The separation result of genomic DNA from blood indicated that Fe(3)O(4)/SiO(2)-GPTMS-DEAE nanoparticles have outstanding advantages in operation, selectivity, and capacity.     

壳核型磁性纳米纤维素微球的超声制备及表征

A kind of cellulose magnetic nanoparticle with a core / shell structure has been prepared by ultrasonic irradiation. Cellulose acts as the shell while Fe3O4 magnetic nanoparticles take the role as the core. Magnetic force microscopy（MFM）with atomic force microscopy（AFM）measurement showed that the size of the magnetic nanoparticles is about 30-50 nm in diameter,while the Fe3O4 core is about 20-30 nm. FT-IR,XRD and MFM was used to provide the chemical and magnetic information of the nanoparticles. The MFM image showed that the nanoparticles separate very well with each other,indicating the cellulose shell produces a good prevention from the aggregation of the Fe3O4 particles. MFM studies also showed two magnetic nanoparticles can form particle-pairs,indicating a weak magneto-dipole interaction between magnetic nanoparticles. It is also found that the average sizes of magnetic nanoparticles have relation to the power of ultrasonic irradiation,and the possible mechanism is discussed.     

聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料的制备与表征

采用2,2,6,6-四甲基-1-哌啶氧化物(TEMPO)的溴盐对化学共沉淀法制备的Fe3O4纳米粒子进行表面修饰,以该粒子为过氧引发剂,苯乙烯(St)、马来酸酐(MA)为单体,采用"活性"/可控自由基聚合技术在粒子表面原位引发聚合,制备了聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料,并对纳米Fe3O4及杂化材料进行了FT-IR、XRD、TGA、TEM和GPC表征。结果表明,所制备的纳米杂化材料的平均粒径约为70 nm,磁性粒子表面的聚合物分子链随着聚合时间的增长而增长。振动样品磁强计测试结果显示,在室温、外加磁场下,该纳米杂化材料呈现超顺磁性,饱和磁化强度随着包覆聚合物量的增加而降低。     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

Preparation and characterization of thermosensitive polymers grafted onto silica-coated iron oxide nanoparticles

In this study, multifunctional nanoparticles containing thermosensitive polymers grafted onto the surfaces of 6-nm monodisperse Fe(3)O(4) magnetic nanoparticles coated by silica were synthesized using reverse microemulsions and free radical polymerization. The magnetic properties of SiO(2)/Fe(3)O(4) nanoparticles show superparamagnetic behavior. Thermosensitive PNIPAM (poly(N-isopropylacrylamide)) was then grafted onto the surfaces of SiO(2)/Fe(3)O(4) nanoparticles, generating thermosensitive and magnetic properties of nanocomposites. The sizes of fabricated nanoparticles with core-shell structure are controlled at about 30 nm and each nanoparticle contains only one monodisperse Fe(3)O(4) core. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles measured using DSC was at around 34-36 degrees C. The magnetic characteristics of these multifunctional nanoparticles were also superparamagnetic.     

分散聚合法制备液相芯片聚苯乙烯磁性复合微球的研究

本文将丙烯酸基磁流体均匀分散到苯乙烯单体中,采用分散聚合法制备出了适于构建液相芯片微球载体的单分散性微米级磁性微球.考察了丙烯酸基磁流体预处理时间、加料顺序和单体量对微球形貌和粒径分布的影响及其条件优化.扫描电镜(SEM)显示磁性微球平均粒径为7.77 μm,具有良好的单分散性(多分散指数PDI为1.03),并且表面光滑致密;用超导量子干涉磁强计测量了Fe3O4纳米粒子的磁化曲线;用红外光谱(FT-IR)和热失重(TG)方法表征了磁性微球的化学结构及Fe3O4含量.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

Three-layer composite magnetic nanoparticle probes for DNA

A method for synthesizing composite nanoparticles with a gold shell, an Fe3O4 inner shell, and a silica core has been developed. The approach utilizes positively charged amino-modified SiO2 particles as templates for the assembly of negatively charged 15 nm superparamagnetic water-soluble Fe3O4 nanoparticles. The SiO2-Fe3O4 particles electrostatically attract 1-3 nm Au nanoparticle seeds that act in a subsequent step as nucleation sites for the formation of a continuous gold shell around the SiO2-Fe3O4 particles upon HAuCl4 reduction. The three-layer magnetic nanoparticles, when functionalized with oligonucleotides, exhibit the surface chemistry, optical properties, and cooperative DNA binding properties of gold nanoparticle probes, but the magnetic properties of the Fe3O4 inner shell.     

Preparation of hybrid hollow capsules formed with Fe3O4 and polyelectrolytes via the layer-by-layer assembly and the aqueous solution process

Well-defined magnetic hybrid hollow capsules formed with magnetite (Fe₃O₄) and polyelectrolyte-multilayer films were successfully prepared through colloidal templating with layer-by-layer assembly of polyelectrolytes, followed by aqueous solution deposition of Fe₃O₄. Pd catalyst nanoparticles played an important role in the deposition of Fe₃O₄. Pd nanoparticles favorably adsorbed onto the polyelectrolyte layer with positively charged amino groups. Hollow capsules were obtained by the removal of the melamine–formaldehyde core particles. Although the processes were performed in aqueous solutions at temperatures less than 60 °C, X-ray diffraction patterns revealed that the deposited Fe₃O₄ was highly crystallized. The hollow capsules were stably dispersed in water; however, the capsules rapidly congregated around a locally applied magnet.     

Preparation of silica-magnetite nanoparticle mixed hemimicelle sorbents for extraction of several typical phenolic compounds from environmental water samples

A novel type of superparamagnetic silica-coated (Fe3O4/SiO2 core/shell) magnetite nanoparticle modified by surfactants has been successfully synthesized and was applied as an effective sorbent material for the pre-concentration of several typical phenolic compounds (bisphenol A (BPA), 4-tert-octylphenol (4-OP) and 4-n-nonylphenol (4-NP)) from environmental water samples. Compared with pure magnetic particles, a thin and dense silica layer would protect the iron oxide core from leaching out in acidic conditions. In order to enhance their adsorptive tendency towards organic compounds, cetylpyridinium chloride (CPC) or cetyltrimethylammonium bromide (CTAB) were added, which adsorbed on the surface of the Fe3O4/SiO2 nanoparticles (Fe3O4/SiO2 NPs) and formed mixed hemimicelles. Main factors affecting the adsolubilization of analytes were optimized and comparative study on the use of CPC and CTAB-coated Fe3O4/SiO2 NPs mixed hemimicelles-based SPE was also carried out. CPC-coated Fe3O4/SiO2 NPs system was selected due to lower elution volume required and more effective adsorption of the target compounds. Under selected conditions, concentration factor of 1600 was achieved by using this method to extract 800 mL of different environmental water samples. The detection limits obtained for BPA, 4-OP and 4-NP with HPLC-FLD were 7, 14, and 20 ng/L, respectively.     

Fabrication of superparamagnetic macroporous Fe3O4 and its derivates using colloidal crystals as templates

In this paper, we reported the preparation of superparamagnetic macroporous Fe(3)O(4) and its derivates using organic colloidal crystal as templates and their catalytic activity for chemical vapor deposition. The poly(styrene-methyl methacrylate-acrylic acid) (P(St-MMA-AA)) copolymer colloids were deposited in an orderly manner onto the silicon surface, together with the infiltration of the Fe(3)O(4) nanoparticles into the interspaces of the colloids. The formed hybrid colloidal crystal subsequently was immersed in tetrahydrofuran to remove the organic components fully to obtain a macroporous Fe(3)O(4) framework with three-dimensional porous structure. The macroporous Fe(3)O(4) exhibits superparamagnetism due to the magnetic coupling of Fe(3)O(4) nanoparticles in the structure. Macroporous Fe(2)O(3) and Fe materials were obtained based on oxidization and reduction of the macroporous Fe(3)O(4), respectively. It was demonstrated that the macroporous Fe(3)O(4) materials possess catalytic activity and can induce growth of carbon nanotubes.     

Synthesis of Fe_3O_4@SiO_2@polymer nanoparticles for controlled drug release

Novel multifunctional nanoparticles containing a magnetic Fe3O4@SiO2 sphere and a biocompatible block copolymer poly(ethylene glycol)-b-poly(aspartate)(PEG-b-PAsp) were prepared.The silica coated on the superparamagnetic core was able to achieve a magnetic dispersivity,as well as to protect Fe3O4 against oxidation and acid corrosion.The PAsp block was grafted to the surface of Fe3O4@SiO2 nanoparticles by amido bonds,and the PEG block formed the outermost shell.The anticancer agent doxorubicin(DOX) was loade...