Synthesis and study of 4‐(4′‐n‐alkoxybenzoyloxybenzoyl)‐4′′‐n‐butoxyanilides

Thirteen compounds with ester and amide linkages were synthesized and their mesogenic properties evaluated. Methyl to n‐propyl derivatives exhibit nematic phases, n‐butyl to n‐decyl derivatives exhibit smectic and nematic mesophases, whereas n‐dodecyl to n‐octadecyl derivatives exhibit only smectic phases. All the smectic homologues exhibit smectic C phases. Middle members of the homologous series exhibit polymorphism of smectic mesophase. A plot of transition temperatures versus number of carbon atoms in the alkoxy chain reveals an odd–even effect for nematic–isotropic transition temperatures. Nematic–isotropic and smectic–cholesteric thermal stabilities of the prepared compounds (series I) are higher compared to those of previously reported compounds, series A, B and C. The results indicate that a simple reversal of a central linkage has a dramatic effect on the appearance of smectic mesophase in a homologous series. The structures of the synthesized compounds were characterized using elemental analysis, thin‐layer chromatography and spectral data.     

Synthesis of 4‐Substituted‐ and 1,4‐Disubstituted‐4‐Hydroxypyrrolidin‐2‐ones

This report describes the synthesis of 4‐substituted‐ and 1,4‐disubstituted‐4‐hydroxypyrrolidin‐2‐ones by cyclization of intermediate γ‐aminoesters prepared from alkylbenzylamines, α‐bromoketones, and lithio ethyl acetate.     

Synthesis of (R)‐Japonilure and (4R,9Z)‐9‐Octadecen‐4‐olide,Pheromones of the Japanese Beetle and Currant Stem Girdler

Asymmetric total synthesis of the sex pheromones of Japanese beetle and currant stem girdler, (R)‐japonilure (1) and (4R,9Z)‐9‐octadecen‐4‐olide (2), has been achieved.     

Synthesis,Characterization and Thermal Degradation of Oligo‐2‐[(4‐hydroxyphenyl) Imino Methyl]‐1‐naphtol and Oligomer‐Metal Complexes

The oxidative polycondensation of 2‐[(4‐hydroxyphenyl) imino methyl]‐1‐naphtol (4‐HPIMN) has been accomplished by using NaOCl, H₂O₂ and air O₂ oxidants in aqueous alkaline medium. Optimum reaction conditions of the oxidative polycondensation and the main parameters of the process were established. At optimum reaction conditions, yield of the products were found to be 77.0%, 91.6% and 99.0% for H₂O₂, air O₂ and NaOCl oxidants, respectively. The structures of the obtained monomer and oligomer were confirmed by FT‐IR, UV‐Vis, ¹H‐ and ¹³C‐NMR and elemental analysis. The characterization was made by TG‐DTA, SEC and solubility tests. The ¹H‐ and ¹³C‐NMR data shows that the polymerization proceeded by the C–C coupling of ortho positions according to –OH group of 4‐HPIMN. The molecular weight distribution values of the product were determined by using size exclusion chromatography (SEC). The number‐average molecular weight (M_n), weight‐average molecular weight (M_w) and polydispersity index (PDI) values of O‐4‐HPIMN were found to be 1777, 2225 and 1.252; 1790, 2250 and 1.257; 4540, 5139 g mol^?1, and 1.132 for NaOCl, H₂O₂ and air O₂ oxidants, respectively. According to TG analyses, the carbonaceous residue of 4‐HPIMN and O‐4‐HPIMN was found to be 28.02% and 44.22% at 1000°C, respectively. Thermal analyses of O‐4‐HPIMN‐Cd, O‐4‐HPIMN‐Co, O‐4‐HPIMN‐Cu, O‐4‐HPIMN‐Fe, O‐4‐HPIMN‐Mg, O‐4‐HPIMN‐Mn, O‐4‐HPIMN‐Ni, O‐4‐HPIMN‐Pb and O‐4‐HPIMN‐Zn oligomer‐metal complex compounds were investigated in N₂ atmosphere between 15–1000°C.     

Copolymers of 2‐(3‐(6‐tetralino)‐3‐methyl‐1‐cyclobutyl)‐2‐Hydroxyethyl Methacrylate with Acrylonitrile and 4‐Vinylpyridine: Synthesis,Characterization, and Monomer Reactivity Ratios

The copolymerization of 2‐(3‐(6‐tetralino)‐3‐methyl‐1‐cyclobutyl)‐2‐hydroxyethyl methacrylate (TCHEMA), monomer with acrylonitrile and 4‐vinylpyridine were carried out in 1,4‐dioxane solution at 65°C using AIBN as an initiator. The copolymers were characterized by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopic techniques. Thermal properties of the polymers were also studied by thermogravimetric analysis and differential scanning calorimetry. The copolymer compositions were determined by elemental analysis. The monomer reactivity ratios were calculated by the Fineman‐Ross and Kelen‐Tüdös method. Also, the apparent thermal decomposition activation energies were calculated by the Ozawa method with a Shimadzu TGA 50 thermogravimetric analysis thermobalance.     

General and Facial Synthesis of 2‐Amino‐5‐halogenpyrimidine‐4‐carboxylic Acids and Their Derivatives

A facile synthetic approach to 2‐amino‐5‐halogen‐pyrimidine‐4‐carboxylic acids from 5‐halogen‐2‐methylsulfonylpyrimidine‐4‐carboxylic acid by nucleophilic displacement of the methylsulfonyl group with primary and secondary aliphatic amines has been developed. The titled amino acids underwent decarboxylation, yielding 2‐amino‐5‐halogenpyrimidines. Starting from 2‐amino‐5‐chloropyrimidine‐4‐carboxylic acid chlorides, 2‐[5‐chloro‐2‐(amino)‐4‐pyrimidinyl]‐2‐oxo‐1‐(2‐pyridyl)‐ethyl cyanides were obtained in excellent yields.     

Synthesis,Characterization and Photocrosslinking Properties of Poly(1‐(4‐Methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one)

The phenylmethacrylamide monomer, 1‐(4‐methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one (MPNP) containing a photosensitive group was synthesized by reacting 4‐nitrocinnamoylaniline with methacryloyl chloride in the presence of triethylamine at 0–5°C. The functional monomer, MPNP was polymerized in ethyl methyl ketone (EMK) under nitrogen atmosphere at 70°C using benzoyl peroxide (BPO) as the initiator. The synthesized polymer was characterized by UV, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by radical recombination than disproportionation. The thermal studies of the polymer were obtained from thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The solubility of the polymer was tested in various organic solvents at room temperature. The photosensitivity of the polymer was investigated in various solvents in the presence and absence of triplet photosensitizers. The effect of the different solvents nature and concentration on the rate of photocrosslinking of the polymer were also examined for using the polymer as negative photoresist materials.     

Novel Methods for the Synthesis of 4‐Arylisoquinolinium Perchlorates and 4‐Arylisoquinolin‐1‐ones

2‐Benzylamino‐1‐phenyl‐ethanones 1 were converted to the corresponding isoquinolinium perchlorates 2 in high yields using 70% HClO₄‐FeCl₃ mixture as a cyclization and oxidation reagent. A mild and high yielding method for the oxidation of perchlorates 2 to isoquinolin‐1‐ones 3 involving the treatment of 2 with KOH and K₃[Fe(CN)₆] in THF‐H₂O two‐phase system at room temperature was developed. Compounds 2a–g were shown to be disproportionate to 3 and the corresponding 1,2‐dihydroisoquinoline 4 in the presence of base, which in turn is oxidized by K₃[Fe(CN)₆] to 2.     

MAOS of D‐Gluconic Acid,D‐Glucono‐1,4‐ and 1,5‐Lactones,Esters, Hydrazides,and Benzimidazoles Thereof

Microwave‐assisted organic synthesis (MAOS) of D‐gluconic acid can be efficiently done by oxidation of D‐glucose with bromine water, upon irradiation with microwave (MW). It was also used for the conversion of D‐gluconic acid to ethyl D‐gluconate, D‐glucono‐1,4‐ and 1,5‐lactones, gluconyl hydrazide, and gluconyl phenylhydrazide in yields comparable to those obtained by conventional methods, but in much shorter times. A convenient microwave‐mediated condensation of D‐gluconic acid with o‐phenylenediamines provided the respective acyclonucleoside benzimidazole in short time and good yield.      

Synthesis and Characterization of Alkyl and Aryl‐(4‐methyl‐6‐nitro‐quinolin‐2‐yl)amines: X‐Ray Structures of Ethyl and Cyclohexyl‐(4‐methyl‐6‐nitro‐quinolin‐2‐yl)amine

Abstract

We have synthesized and characterized a series of alkyl and aryl‐(4‐methyl‐6‐nitro‐quinolin‐2‐yl)amines through a high‐yield, three‐step procedure starting from 4‐methylquinolin‐2‐ol. Nitration using concentrated nitric/sulfuric acids, followed by chlorination in phosphorus oxychloride, yielded 2‐chloro‐4‐methyl‐6‐nitro‐quinoline. All of the intermediates and aminated products have been characterized by multinuclear (¹H and ¹³C) NMR spectroscopy, elemental analysis, and, in the case of the two title compounds (ethyl and cyclohexyl‐(4‐methyl‐6‐nitro‐quinolin‐2‐yl)amine), a single crystal X‐ray structure was obtained to verify the nature of the new materials.     

Synthesis of 1,2,4‐Triazinediones, 1,2,4,3‐Triazaphospholines,and 1,2,4,3‐Triazaphospholine‐3‐oxide Derivatives

The reaction of N ¹‐tosylamidrazones 1 with oxalyl dichloride, phosphorus trichloride, and phosphoryl chloride leads to 1,2,4‐triazinediones 3 , 1,2,4,3‐triazaphospholines 4 , and 1,2,4,3‐triazaphospholine‐3‐oxides 5 , respectively. The structures of the new products have been established by IR; ¹H, ¹³C, and ³¹P NMR studies; and elemental analysis.     

Synthesis,Structures, and Properties of Novel N‐Aryl‐phenanthren‐o‐iminoquinones

The interaction of 9,10‐phenanthrenquinone with primary amines has been studied. Use of sterically hindered anilines gave the phenanthren‐o‐iminoquinones in good yields. These compounds are structural analogues of o‐benzoquinones. Using single‐electron reduction, o‐iminoquinones may synthesize metal's free‐radical complexes.     

Structure and Conformational Mobility of 4′‐Pentyl‐4‐Cyanobiphenyl from IR Spectroscopic Data

The structure and conformational mobility of 4pentyl4cyanobiphenyl in the liquid and liquidcrystal states were investigated by means of IR spectroscopy (experiment and theory). IR absorption spectra in the frequency range 400–4000 cm^-1 were measured in the temperature range 26–150°. Theoretical simulation of the IR spectra was performed using the fragment approach. A comparison of theoretical and experimental spectra showed that the examined samples were mixtures of conformers; characteristics of the most probable conformers are given. Temperaturerelated changes in the spectrum are due to the conformational mobility of the molecules, which is not high in the temperature range considered.     

Organic Base‐Catalyzed Stereoselective Isomerizations of 4‐Hydroxy‐4‐phenyl‐but‐2‐ynoic Acid Methyl Ester to (E)‐ and (Z)‐4‐Oxo‐4‐phenyl‐but‐2‐enoic Acid Methyl Esters

We have developed a 1,4‐diazabicyclo[2.2.2]octane (DABCO)‐catalyzed isomerization of 4‐hydroxy‐4‐phenyl‐but‐2‐ynoic acid methyl ester to (E)‐4‐oxo‐4‐phenyl‐but‐2‐enoic acid methyl ester and an N,N‐diisopropylethylamine‐catalyzed isomerization of the same substrate to (Z)‐4‐oxo‐4‐phenyl‐but‐2‐enoic acid methyl ester.     

Solution properties and mesophase formation of 4‐phenyl‐benzoylcellulose

Cellulose samples were derivatized in dimethylacetamide/LiCl (DMAc/LiCl) to give 4phenylbenzoylcelluloses (PBCs). The process is quantitative and leads to an highly substituted product, as verified by elemental analysis, IR and ¹³CNMR spectroscopy. PBC samples were characterized by viscometric and light scattering measurements in DMAc. The persistance length q is used to evaluate the theoretical critical volume fraction for mesophase formation (v _th, which has been found higher than the experimental critical one (v _exp)     

Iodine‐Mediated Synthesis of 2‐Arylbenzoxazoles, 2‐Arylbenzimidazoles,and 1,3,5‐Trisubstituted Pyrazoles

2‐Arylbenzoxazoles and 2‐arylbenzimidazoles were synthesized by the reaction of aldehydes with 2‐aminophenol and O‐phenylenediamines in the presence of iodine. 1,3,5‐Trisubstituted pyrazoles were synthesized from chalcones and hydrazines in the presence of iodine.     

Formation of 1,2,5‐Oxadiazole,Isoxazole, Isothiazole, 1,2,3‐Triazole,and Pyrrole Rings from N‐(5,5‐Dimethyl‐3‐oxocyclohexenyl)‐S,S‐diphenylsulfilimine

Reactions of N‐(5,5‐dimethyl‐3‐oxocyclohexenyl)‐S,S‐diphenylsulfilimine, a kind of enaminone, with isopentyl nitrite, isocyanates, isothocyanates, benzenediazonium chloride, and 1,1,1‐trifluoro‐4‐ethoxy‐3‐buten‐2‐one gave 1,2,5‐oxadiazole, isoxazole, isothiazole, 1,2,3‐triazole, and pyrrole derivatives condensed with cyclohexane, respectively, in one pot.     

Comparative Analysis of the Properties of Tween‐20, Tween‐60, Tween‐80, Arlacel‐60, and Arlacel‐80

Foamability and foam stability, emulsifying power, surface tension, and interfacial tension were investigated for Tween‐20 (polyoxyethylene sorbitan monolaurate), Tween‐60 (polyoxyethylene sorbitan monostearate), Tween‐80 (polyoxyethylene sorbitan monooleate), Arlacel‐60 (Sorbitan stearate), and Arlacel‐80 (Sorbitan oleate). Among all the surfactants tested for their foaming power and foamabilty, Arlacel‐60 and Arlacel‐80 showed the best results; the foaming power and foamability was found to be 100%. The surfactants having foam stability more than 50% can be considered as metastable and those less than 50% are considered as low‐stability foams. In case of surface tension and interfacial tension property measurements, Arlacel‐80 showed the best results. At 1% surfactant concentration, the surface tension and interfacial tension of Arlacel‐80 was found to be 29.9 dynes/cm and 1.1 dynes/cm at 30°C ambient temperature. Also, Arlacel‐60 was found to exhibit the best emulsifying power among all the surfactants tested. At 30°C, the emulsifying property of Arlacel‐60 was 6 hours.     

Bromination of 4‐Dichloromethyl‐4‐methylcyclohexa‐2,5‐dien‐1‐ones

Bromination of 4‐dichloromethyl‐4‐methylcyclohexa‐2,5‐dien‐1‐one and 4‐dichloromethyl‐3,4‐dimethylcyclohexa‐2,5‐dien‐1‐one has been studied. The reaction conditions required for the formation of mono‐, di‐, and tribrominated products have been optimized.