Biomimetic Synthesis of Water Soluble Conductive Polypyrrole and Poly(3,4‐Ethylenedioxythiophene)

Abstract

A novel biomimetic method for the synthesis of conducting molecular complexes of polypyrrole (PPYR) and poly(3,4‐ethylenedioxythiophene) (PEDOT) in the presence of a polyelectrolyte, such as polystyrene sulfonate (SPS) is presented. A poly(ethylene glycol) modified hematin (PEG‐Hematin) was used to catalyze the polymerization of pyrrole (PYR) and 3,4‐ethylenedioxythiophene (EDOT) in the presence of SPS to form PPYR/SPS and PEDOT/SPS complexes. UV‐VIS, FT‐IR, and electrical conductivity studies for all complexes indicated the presence of a stable and electrically conductive form of these polymers. Furthermore, the presence of SPS in this complex provides a unique combination of properties such as processability and water‐solubility.     

Compressive Elastic Moduli of Poly(N‐Isopropylacrylamide) Hydrogels Crosslinked with Poly(Dimethyl Siloxane)

Hydrophobically modified and thermally reversible neutral and ionic copolymer hydrogels were prepared from N‐isopropylacrylamide (NIPAAm), vinyl terminated poly (dimethylsiloxane) (VTPDMS) and itaconic acid (IA) by free radical solution polymerization, and their properties such as swelling ratio and compression modulus were studied at the 25°C. The incorporation of VTPDMS as a hydrophobic macrocrosslinker into the structures of neutral NIPAAm hydrogels increased their mechanical strength around 10 times than those of the ones crosslinked with conventional tetra functional monomer, i.e., N,N′‐methylene bisacrylamide (BIS). Compression modulus decreased with an increase in IA content for ionic samples and increased with increasing molecular weight and content of VTPDMS for neutral samples. It was assumed that in the first case, electrostatic repulsive forces resulting from the ionized carboxyl groups of IA were responsible for decreasing mechanical strength, while in the second case, hydrophobic interactions between dimethylsiloxane units of VTPDMS chains enhanced the compression moduli. According to the results presented in this work, it can be said that the right balance of hydrophobic and hydrophilic constituents and adjustment of the number of ionized groups, as well as crosslinking degree, change the structure and physical properties of NIPPAAm hydrogels.     

Poly(3,5‐dichloroaniline) Doped with Different Sulfonic Acids

Poly(3,5‐dichloroaniline) was prepared by chemical oxidation in the presence of various sulfonic acids as doping agent, using potassium permanganate as oxidant. 1‐Naphtalene sulfonic acid, 2‐naphatalene sulphonic acid, 1,5‐naphtalene disulfonic acid, and p‐toluenesulfonic acid were the acids of choice. Infrared and UV‐Vis spectroscopy, utilized to characterize the polymers, revealed that the compounds exist in the emeraldine (conductive) oxidation state. The level of doping, conductivity, and morphology were determined as well. The presence of a sulfonic acid produces a morphological change, from granular to microtubule structures, which is responsible for the strong increase in the conductivity of the polymer.     

Design of EGDMA‐Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity

An attempt has been made to design theophylline selective polymers with maximum selectivity and specificity, and to relate the rebinding capacity of the polymers with the degree of crosslinking, as well as with the template‐monomer ratio. The theophylline imprinted and non‐imprinted polymers based on methacrylic acid as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent (35–80 mol%) were prepared. The developed imprinted polymers were characterized by FT‐IR, ¹H and ¹³C‐NMR spectra. Equilibrium binding of theophylline by the imprinted and non‐imprinted polymers were investigated and optimized the conditions. Imprinted polymers showed specific binding of the template theophylline. Selectivity of the imprinted polymers was investigated towards caffeine and nicotine. Imprinted polymers showed specific and selective binding of theophylline, which varied with the degree of EGDMA crosslinking. Equilibrium rebinding experiments proved that imprinted polymer with moderate (70%) crosslinking with 1∶2 template‐functional monomer ratio is ideal with maximum specificity and selectivity.     

Rapid Microwave‐Assisted Liquid‐Phase Synthesis of 4‐Substituted‐5‐methoxycarbonyl‐6‐methyl‐3,4‐dihydropyridones on Poly(ethylene Glycol) Support

4‐Substituted‐5‐methoxycarbonyl‐6‐methyl‐3,4‐dihydropyridones have been efficiently prepared on the soluble polymer polyethylene glycol (PEG) 4000 by solvent‐free microwave irradiation through a one‐pot condensation of PEG‐bound acetoacetate, Meldrum's acid, ammonium acetate, and the appropriate aldehyde in the presence of a catalytic amount of polyphosphoric acid. The polymer‐supported synthesis provided the target compounds in excellent yield and purity with a facile workup procedure.     

The Preparation and Biodegradable Properties of Poly(L‐lactic acid)‐Poly(ϵ‐caprolactone) Multiblock Copolymers

Multi‐block copolymers of PLLA and PCL were prepared by a coupling reaction between PLLA and PCL prepolymers with –NCO end groups. FTIR proved that the products were PLLA‐PCL copolymers. The weight‐average molecular weight of the copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL. The degradation properties of PLLA and PLLA‐PCL copolymers were studied by a soil burial test and a hydrolysis test in a phosphate‐buffer solution. The degradation rate was estimated by the mass loss, molecular weight reduction, pH value changes and swelling index; the degradation rates of the copolymers were a function of the composition of PLLA and PCL. Increasing PCL content in the copolymers resulted in lower degradation rate.     

Synthesis and Conductivity of a One-dimensional Polymer of a Copper(Ⅱ)-porphyrazine with Sulfur Bridges

Phthalocyanines(Pcs)andtheirpolyinershavebeenasubjectofgreatinterestduetotheirhighthermalstabilityanduniquephotoelectricpropertiesl4.Ithasbeenfoundthatsomeelectronicfunctionsofthemetalthioporphyrazinesandtheirconjugatedpolymers,suchasgas-sensitivityphotosensitivity,photoconductivityandelectrocatalyticactivity,aremorepeculiarthancorrespondingPcs5'6.Oneofourinterestsistodesignanovelpolymerofmetalporphyrazines(PMPzs)withswitchingpointsunderthecontrolofachangingexternalfieIdorenvironment.Inthepr…     

Swelling Behavior of Semi‐Interpenetrating Polymer Network Hydrogels Based on Chitosan and Poly(acryl amide)

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of chitosan and polyacrylamide (PAAm) hydrogels have been prepared, and the effect of changing pH, temperature, ionic concentration, and applied electric fields on the swelling of the hydrogels was investigated. The swelling kinetics increased rapidly, reaching equilibrium within 60 min. The semi‐IPN hydrogels exhibited a relatively high swelling ratios of 385%–569% at T=25°C. The swelling ratio increased with decreasing pH below pH=7 due to the dissociation of ionic bonds. The swelling ratio of the semi‐IPN hydrogels was pH, ionic concentration, temperature, and electric field dependent. Differential scanning calorimetry (DSC) was used to determine the volume of free water in the semi‐IPN hydrogels, which was found to increase with increasing PAAm content.     

Noncovalent Functionalization of Multiwalled Carbon Nanotubes by Anionic Polymer Poly(Sodium 4‐Styrenesulfonate) in Water

We have found that polymer poly (sodium 4‐styrenesulfonate) (PSS) is a facile and effective polymer to assist in the dispersion of MWCNTs in aqueous solutions. With the increase of the concentration of PSS solutions, the dispersibility of MWCNTs in PSS solution increases. Cast films of MWCNTs/PSS (2 wt.%) on GC electrode show a typical redox couple at scan rate of 1 V/s in phosphate buffer solution, indicating good electrical conductivity.     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

Crystallizability of Poly(ε-caprolactone) Blends with Poly(vinylphenol) under Different Conditions

The intermolecular interaction between poly（vinylphenol） （PVPh） and polycaprolactone （PCL） and the crystallization behavior of PCL in PCL/PVPh blends with different compositions and under different conditions were investigated by Fourier transform infrared spectra （FTIR） and differential scanning calorimetry （DSC）. It has been shown that the PCL in the blends with different blend ratios all exists in crystalline state after solution casting, even though the crystallinity decreases with increasing PVPh content. For the melt crystallized samples, PCL in its 80/20 PCL/PVPh sample can still crystallize. The crystallinity is, however, lower than that of the solution cast sample. For blends containing 50% or 20% PCL, the as-cast samples are semicrystalline and can change to compatible amorphous state after heat treatment process. FTIR analysis shows the existence of hydrogen bonding between PCL and PVPh and the fraction of hydrogen bonds increases remarkably after heat treatment process.     

Synthesis and Properties of Poly(AAm‐KMA‐MA) Hydrogels

In this investigation, poly(acrylamide‐co‐potassium methacrylate‐co‐maleic acid) hydrogels, poly(AAm‐KMA‐MA) were synthesized by redox copolymerization in aqueous solution. The effect of reaction parameters, such as concentration of maleic acid, crosslinking agent, initiator and activator, on the swelling behavior was investigated in detail. The swelling/diffusion characteristics were also evaluated for 1,4‐butanediol diacrylate (BDDA) and 1,2‐ethyleneglycol dimethacrylate (EGDMA) crosslinked hydrogels having different amounts of maleic acid. The results indicate that the water diffusion of hydrogels was of a non‐Fickian type. The hydrogels were characterized by IR spectroscopy and thermogravimetric analysis (TGA). Their surface characteristics were observed by using scanning electron microscopy (SEM). Furthermore, their swelling phenomena in different pH and salt solutions and simulated biological fluids was also studied.     

A New Nano‐Structured Flame‐Retardant Poly(ethylene terephthalate)

A modified nano‐hydrotalcite was used as inorganic flame‐retardant fillers for poly(ethylene terephthalate) (PET) polymers. A flame‐retardant compound was obtained from layered hydrotalcite (LDH) dispersed in brominated polystyrene (PBS) solution and then solvent evaporation from the dissolved PBS samples. The compound of PBS/LDH was characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) and was found to have high aspect ratio LDH dispersed in the PBS matrix. Flame‐retardant PET composite was prepared by melt‐compounding the flame‐retardant compound of PBS/LDH and PET. Improvement in the fire retardancy of the nano‐flame‐retardant PET composite obtained was found by measuring the oxygen index. The nanostructure of flame‐retardant PET composite was chirecterized by scanning electron microscopy (SEM) of flame‐retardant PET composite. The mechanical properties of the flame‐retardant PET nano‐composite were also characterized.     

Synthesis,Characterization and Photocrosslinking Properties of Poly(1‐(4‐Methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one)

The phenylmethacrylamide monomer, 1‐(4‐methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one (MPNP) containing a photosensitive group was synthesized by reacting 4‐nitrocinnamoylaniline with methacryloyl chloride in the presence of triethylamine at 0–5°C. The functional monomer, MPNP was polymerized in ethyl methyl ketone (EMK) under nitrogen atmosphere at 70°C using benzoyl peroxide (BPO) as the initiator. The synthesized polymer was characterized by UV, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by radical recombination than disproportionation. The thermal studies of the polymer were obtained from thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The solubility of the polymer was tested in various organic solvents at room temperature. The photosensitivity of the polymer was investigated in various solvents in the presence and absence of triplet photosensitizers. The effect of the different solvents nature and concentration on the rate of photocrosslinking of the polymer were also examined for using the polymer as negative photoresist materials.     

Synthesis of 1,4‐Bis[(3‐Aryl)‐s‐triazolo(3,4‐b)‐(1,3,4)thiadiazole‐6‐yl]benzenes

Some 1,4‐bis[(3‐aryl)‐s‐triazolo[3,4‐b]‐[1,3,4]thiadiazole‐6‐yl]benzenes are readily accessible in high yields by reaction of 3‐aryl 4‐amino‐5‐mercapto‐1,2,4‐triazole with p‐phthalic acid.     

Asymmetric Synthesis of (2S)‐1‐(3,4‐Dihydroxyphenoxy)‐3‐(3,′4′‐Dimethoxyphenoxy) Ethylamino‐2‐propanol hydrochloride (RO363)

Enantiomerically pure (S)‐RO363 was synthesized by using (R,R) Salen Co(III) complex for the resolution of terminal epoxide. The hydrolytic kinetic resolution process was carried out at room temperature in excellent enantioselectivity. The method can be applied for large‐scale preparation of (S) RO363.     

Synthesis and Characterization of Hydroxyl‐Terminated Poly(γ‐benzyl‐L‐glutamate)

In order to provide an active end group of hydroxyl group and improve the hydrophility of poly(γ‐benzyl‐L‐glutamate) (PBLG), ethanolamine (EA) was utilized as the initiator to initiate N‐carboxy‐γ‐benzyl‐L‐glutamate anhydride (Bz‐L‐Glu‐NCA) polymerization. The prepared hydroxyl‐terminated PBLG (HO‐PBLG) was fully characterized by FTIR, ¹H‐NMR, XPS, XRD, DSC, and GPC. The results of FTIR and XRD indicated that the chain conformation of HO‐PBLG predominantly presented α‐helix. The water contact angle was measured to confirm that the hydrophilicity was improved by the introduction of hydroxyl group. Chondrocytes studies showed that the cells attachment efficiency on the HO‐PBLG film was good and the cells grew well.     

Rheological Behavior of Dope Solutions of Poly(acrylonitrile‐co‐itaconic acid) in N,N‐dimethylformamide: Effect of Polymer Molar Mass

The rheological behavior of dope solutions of poly(acrylonitrile‐co‐itaconic acid) or poly(AN‐co‐IA) is important from the point of view of deriving the spinning conditions for good quality special acrylic fibers. The viscosity of the resin dope is dictated by the polymer concentration, molar mass, temperature and shear force. The dynamic shear rheology of concentrated poly(AN‐co‐IA) polymer dope solutions in N, N‐dimethylformamide, in the molar mass (M¯_v) range of 1×10⁵ to 1×10⁶ g/mol, was investigated in the shear rate (γ′) range of 1×10¹ to 5×10⁴ min^?1. An empirical relation between η and M¯_v was found to exist at constant shear rate. The dope viscosity was dependent on the molar mass and the shear rate at a given temperature (T) and concentration. The polymer molar mass index of dope viscosity (m) was calculated as functions of concentration (c), shear rate and temperature. The m values increased with shear rate and temperature. A master equation relating m, with shear rate and temperature was derived for a given dope concentration. At higher shear rates, m tends to the value of 3.4, which is close to the molar mass index of viscosity reported for molten thermoplastics. m increased significantly with shear rate and nominally with temperature, while an increase in concentration decreased it. The onset of shear thinning of the dope shifted to a lower shear rate regime with an increase in polymer concentration and the molar mass. For a given value of molar mass, the increase in viscosity of the dope solution with polymer concentration was dependent on the shear rate.     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Synthesis of Star‐Shaped Poly(ϵ‐caprolactone)‐b‐Poly(styrene) Block Copolymer by Combining Ring‐Opening Polymerization and Atom Transfer Radical Polymerization

Newly designed star‐shaped block copolymers made of poly(?‐caprolactone) (PCL) and polystyrene (PS) were synthesized by combining ring‐opening polymerization (ROP) of ?‐caprolactone (CL) and atom transfer radical polymerization (ATRP) of styrene (St). The switch from the first to the second mechanism was obtained by selective transformation of “living” radical sites. First, tri‐ and tetrafunctional initiators were used as an initiator for the “living” ring opening polymerization (ROP) of ?‐caprolactone producing a hydroxyl terminated three or four arm star‐shaped polymer. Next, the OH end groups of PCL star branches were derivatized into 2‐bromoisobutyrate groups which gave rise to the corresponding tri‐ and tetrabromoester ended‐PCL stars; the latter served as macroinitiators for the ATRP of styrene at 110°C in the presence of CuBr/2,2‐bipyridine (Bipy) catalyst system affording star‐shaped block copolymers PCL_n‐b‐PS_n (n=3 or 4). The samples obtained were characterizated by ¹H‐NMR spectroscopy and GPC (gel permeation chromatograph). These copolymers exhibited the expected structure. The crystallization of star‐shaped block copolymers was studied by DSC (differential scanning calorimetry). The results show that when the content of the PS block increased, the T_m of the star‐shaped block copolymer decreased.