Polymerization of 1-aryl-2-trimethylsilylacetylenes by transition metal catalysts(II)

Polymerization of 1-aryl-2-trimethylsilylacetylene (aryl = thienyl, furyl, and pyridyl) was carried out by transition metal catalysts. The polymer yield was generally low due to the steric hindrance. R₄Sn (R = Me, n-Bu, Ph) exhibits some cocatalytic activities with respect to polymer yield and molecular weight. On the other hand, the polymerization was decelerated when organoaluminum compounds were used as cocatalysts. The polymer yield increased in the following order: phenyl > thienyl > furyl > pyridyl, according to the aryl substituents. The NMR (¹H- and ¹³C-), IR, and UV-visible spectra indicated that the resulting polymers have a linear conjugated polyene structure each containing the aromatic substituent and trimethylsilyl group. From ¹H-NMR integration, it was found that the resulting polymers are partially desilylated depending on the substituents of monomer and the polymerization conditions. The solubility behavior, stability and fluoride-ion induced desilylation reaction of the polymers were also studied.     

Synthesis of hydrogen-terminated aliphatic bis(ethynyl ketone)s and aliphatic poly(enamine-ketone)s and poly(enonesulfide)s

Hydrogen-terminated aliphatic bis(ethynyl ketone)s (H-ABEKs): 1,9-decadiyne-3,8-dione ( 3a ) and 1,13-tetradecadiyne-3,12-dione ( 3b ) were prepared by the Friedel-Crafts reaction of bis(trimethylsilyl) acetylene (BTMSA) with adipoyl chloride and sebacoyl chloride, followed by desilylation with an aqueous buffer solution. Aliphatic poly(enamine-ketone)s (APEKs) and aliphatic poly(enonesulfide)s (APESs) were prepared in nearly quantitative yield by the nucleophilic addition polymerization of 3a,b with various diamines and dithiols in N,N-dimethylformamide (DMF) and m-cresol at room temperature during 14-22 h. Aromatic diamines and dithiols gave polymers that were soluble only in m-cresol. Primary diamines gave exclusively APEKs with the cis (Z) configuration. Dithiols gave APESs which contained more cis (Z) than trans (E) configurations. The inherent viscosities (η_inh) of the APEKs ranged from 0.05 to 0.73 dL/g. The APESs gave η_inh ranging from 0.36 to 2.21 dL/g.     

Hydrodynamic and conformational properties of silicon-substituted addition-type polynorbornene macromolecules

Seven polynorbornene samples containing trimethylsilyl side groups that were prepared by the addition polymerization of 5-trimethylsilyl-2-norbornene in the presence of catalytic systems (π-C₅H₉NiCl)₂-methylaluminoxane and nickel naphthenate-methylaluminoxane have been studied by translational isothermal diffusion and viscometry. The molecular masses of the polymer samples are measured. Kuhn-Mark-Houwink equations for diffusion coefficient D and intrinsic viscosity [η] are determined in toluene at 25°C: D = 6.94 × 10^?4 M ^?0.61 and [η] = 1.53 × 10^?3 M ^0.82. The equilibrium rigidity of polymers chains is estimated as A = 47 ± 9 Å. The conformational features of the silicon-containing polynorbornene are analyzed by the PM3 quantumchemical semiempirical method on the basis of simulation of its decamer chain fragments. In terms of microstructure and equilibrium rigidity, the above-described addition poly(trimethylsilylnorbornene) is close to poly(trimethylsilylpropyne) synthesized using niobium pentachloride as a catalyst. This finding explains similar membrane gas-separation properties of these polymers.     

Radical polymerization behavior of ethyl ortho-formylphenyl fumarate involving intramolecular hydrogen abstraction

The radical polymerization behavior of ethyl ortho-formyl-phenyl fumarate (EFPF) using dimethyl 2,2′-azobisisobutyrate (MAIB) as initiator was studied in benzene kinetically and ESR spectroscopically. The polymerization rate (R_p) at 60°C was given by R_p = k[MAIB]^0.76[EFPF]^0.56. The number-average molecular weight of poly(EFPF) was in the range of 1600–2900. EFPF was also easily photopolymerized at room temperature without any photosensitizer probably because of the photosensitivity of the formyl group of monomer. Analysis of ¹H? and ¹³C-NMR spectra of the resulting polymer revealed that the radical polymerization of EFPF proceeds in a complicated manner involving vinyl addition and intramolecular hydrogen-abstraction. The polymerization system was found to involve ESR-observable poly(EFPF) radicals under the actual polymerization conditions. ESR-determined rate constant (2.4–4.0 L/mol s) of propagation at 60°C increased with decreasing monomer concentration, which is mainly responsible for the observed low de-pendency of R_p on the EFPF concentration. Copolymerizations of EFPF with some vinyl monomers were also examined. © 1995 John Wiley & Sons, Inc.     

Polymerization of trimethylsilylacetylene by WCl6-based catalysts

The polymerization of trimethylsilylacetylene was investigated by using W and Mo catalysts. Mixtures of WCl₆ with appropriate organometallic cocatalysts such as n-Bu₄Sn and Et₃SiH at 1:1 molar ratio provided poly(trimethylsilylacetylene) in high yields. On the other hand, MoCI₅ gave mainly methanol-soluble oligomers even in the presence of these cocatalysts. The polymer formed was a partly insoluble yellow powder, and the molecular weight of the soluble fraction was about 7000. The IR, ¹H-NMR, and ¹³C-NMR spectra supported the polymer structure, (CH = CSiMe₃)_n. Protodesilylation of poly(trimethylsilylacetylene) afforded a new polymer containing both acetylene and trimethylsilylacetylene units.     

Silyl‐protected hydroxystyrenes: Living anionic polymerization at room temperature and selective desilylation

Both 4‐ and 3‐(tert‐butyldimethylsilyl)oxystyrene (MSOST) undergo living anionic polymerization at room temperature with sec‐butyllithium (sBuLi) in cyclohexane or methylcyclohexane upon injection of a small amount of tetrahydrofuran. Desilylation can be conveniently afforded with hydrogen chloride or tetra(alkyl)ammonium fluoride to provide poly(hydroxystyrene) (PHOST) with a narrow molecular weight distribution, which could be further transformed to other polystyrene derivatives. ¹³C NMR spectra of poly(tert‐butyldimethylsilyloxystyrene) (PMSOST) and PHOST prepared under different conditions (tetrahydrofuran vs. cyclohexane, −78 °C vs. 20 °C) have indicated that the room temperature living polymerization in the hydrocarbon‐rich solvent produces polymers with high syndiotacticity. Similarly, 4‐(tert‐butyldiphenylsilyl)oxystyrene (PhSOST), a new monomer, provides living anionic polymerization at room temperature. Desilylation of this polymer can be achieved using tetra(n‐butyl)ammonium or tetraethylammonium fluoride. Inertness of the phenylsilyl ether to HCl allows selective desilylation of the dimethylsilyl ether with HCl in the presence of the phenylsilyl ether group, providing a new route to interesting macromolecules. Application of the selective desilylation technique to the synthesis of a block copolymer of HOST and 4‐tert‐butoxycarbonyloxystyrene (BOCST) is described. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2415–2427, 2000     

Ring‐opening polymerization of lipoic acid and characterization of the polymer

Thermal polymerization of DL ‐α‐lipoic acid (LPA) in bulk without any initiator proceeded easily above the melting point of LPA. The molecular weight polymer determined by GPC was high. From the ¹H NMR spectra of polymers, poly(LPA) obtained from polymerization of high purity LPA was to consist of cyclic structures, which was confirmed by ESI‐MS. Interlocked polymer consisting of poly(LPA) and dibenzo‐30‐crown‐10 entangled with each other was synthesized by the polymerization of LPA in the presence of dibenzo‐30‐crown‐10. From the DSC analysis of the polymers, glass transition temperature was estimated to be about ?11 °C, but melting point was not observed, indicating that poly(LPA) is an amorphous polymer. By photodecomposition of poly(LPA), M_n was rapidly decreased at the early stage of the decomposition. After that, the M_n of the polymer kept and then was almost constant even for a prolonged reaction time. On the basis of the results, it would be presumed that poly (LPA) obtained form polymerization of high purity LPA includes an interlocked structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ring-opening precipitation polymerization of poly(D,L-lactide-co-glycolide) in supercritical carbon dioxide

The biodegradable polymer poly(D ,L -lactide-co-glycolide) was synthesized by a ring-opening precipitation polymerization in supercritical CO₂ using stannous octoate as initiator. Following polymerization, unreacted monomer was removed by supercritical fluid extraction and the polymer was recovered as a porous solid upon depressurization of the CO₂ phase. The lactide to glycolide ratio of the polymer was determined to be 70.7 : 29.3 using ¹³C NMR spectroscopy. The weight-average molecular weight of the product was measured to be 3 500, with a polydispersity of 1.4 using gel permeation chromatography.     

Ring-opening polymerization of 2-azabicyclo-[2,2,1]-hept-5-en-3-one using metathesis catalysts

The ring-opening polymerization of an unsaturated bicyclic lactam, 2-azabicyclo-[2,2,1]-hept-5-en-3-one (ABHEO), was carried out using metathesis catalysts under various reaction conditions. It is observed that the best results (34% conversion and η_inh: 0.18 dL/g) were obtained when the mole ratios of ABHEO to WCl₆ as a catalyst and WCl₆ to AlEt₃ as a cocatalyst were 200 and 4, respectively. The infrared (IR) and nuclear magnetic resonance (¹H- and ¹³C-NMR) spectra of the polymer obtained indicated that the ABHEO was transformed to the ring-opened polymer, poly(2-pyrrolidone-3,5-diylvinylene) [poly(ABHEO)]. The resulting polymer was amorphous as determined by DSC analysis, which showed only secondary transition at 100°C.     

Condensation polymers containing silicon and germanium in the main chain

Poly(carbonates), poly(thiocarbonates) and poly(esteres) containing silicon and/or germanium in the main chain were obtained under phase transfer conditions. Polymers were synthesized in a biphasic system NaOH/CH₂Cl₂ at 20°C using several phase transfer catalysts, and characterized by IR and ¹H and ¹³C NMR. The results were evaluated by the yields and the inherent viscosity values. The process was effective observing an increase of both parameters in comparison with the essays without catalyst. The increases depended of the nature of the polymer and the catalyst. In poly(ester) synthesis there was an increase of these parameters when the NaOH concentration was increased due to a salting out effect of the diphenolate from the aqueous phase to the organic one. Also poly(amides) containing silicon or germanium were synthesized by solution polymerization.     

Neodymium Catalyst for the Polymerization of Dienes and Polar Vinyl Monomers

Ziegler–Natta catalysts have played a major role in industry for the polymerization of dienes and vinyl monomers. However, due to the deactivation of the catalyst, this system fails to polymerize polar vinyl monomers such as vinyl acetate, methyl methacrylate, and methyl acrylate. Herein, a catalytic system composed of NdCl₃⋅3TEP/TIBA is reported, which promotes a quasi‐living polymerization of dienes and is also active for the homopolymerization of polar vinyl monomers. Additionally, this catalytic system generates polymyrcene‐b‐polyisoprene and poly(myrcene)‐b‐poly(methyl methacrylate) diblock copolymers by sequential monomer addition. To encourage the replacement of petroleum‐based polymers by environmentally benign biobased polymers, polymerization of β‐myrcene is demonstrated with a catalytic activity of ≈106 kg polymer mol Nd⁻¹ h⁻¹.     

Polymerization of vinyl chloride by the Ti(O-n-Bu)4–AlEt3–epichlorohydrin catalyst system

The polymerization of vinyl chloride was carried out by using a catalyst system consisting of Ti(O-n-Bu)₄, AlEt₃, and epichlorohydrin. The polymerization rate and the reduced viscosity of polymer were influenced by the polymerization temperature, AlEt₃/Ti(O-n-Bu)₄ molar ratios, and epichlorohydrin/Ti(O-n-Bu)₄ molar ratios. The reduced viscosity of polymer obtained in the virtual absence of n-heptane as solvent was two to three times as high as that of polymer obtained in the presence of n-heptane. The crystallinity of poly(vinyl chloride) thus obtained was similar to that of poly(vinyl chloride) produced by a radical catalyst. It was concluded that the polymerization of vinyl chloride by the present catalyst system obeys a radical mechanism rather than a coordinated anionic mechanism.     

Synthesis of isotactic,syndiotactic, and heterotactic poly(tributyltin methacrylate) and poly(tributyltin methacrylate-co-styrene)

Pure isotactic and enriched syndiotactic poly(tributyltin methacrylate) were synthesized by the reaction of the respective poly(methacrylic acid) with tributyltin oxide. The heterotactic polymer was prepared in a similar manner and from free radical initiated (AIBN or BPO) polymerization of tributyltin methacrylate. In each case, polymer configuration was confirmed by ¹H-NMR of the hydrolyzed/esterfied product. The relatively large ¹¹⁹Sn-NMR linewidth of the isotactic tributyltin containing polymer suggests an intra-molecular exchange of the pendant tin groups. T_g, T_d, and M _v data are also reported. Poly(tributyltinmethacrylate-co-styrene) was prepared by free radical polymerization and reactivity ratios [r(styrene) = 0.51, r(TBTM) = 0.49] and Q-e values for TBTM (0.78, 0.38) were determined.     

Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl sulfoxide) segment by living anionic polymerization

<正>A series of 3-arm ABC and AA'B and 4-arm ABCD,AA'BC and AA′A″B heteroarm star polymers comprising one poly(4-methylphenyl vinyl sulfoxide) segment and other segments such as polystyrene,poly(α-methylstyrene), poly(4-methoxystyrene) and poly(4-trimethylsilylstyrene) were synthesized by living anionic polymerization based on diphenylethylene(DPE) chemistry.The DPE-functionalized polymers were synthesized by iterative methodology,and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers.The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide(MePVSO) initiated from the in situ formed polymer anion with two or three polymer segments.The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well.Both approaches could afford the target heteroarm star polymers with predetermined molecular weight,narrow molecular weight distribution (M_w/M_n1.03) and desired composition,evidenced by SEC,~1H-NMR and SLS analyses.These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.     

Heterotelechelic poly(oxazolidine-acetals) and their functionalization

Telechelic poly(1,3-oxazolidine-acetal)s with -CH₂OH and -CHO groups were synthesized by polycondensation of the 2-amino-2-hydroxy-1,3-propanediol ( 1 ) (TRIS) with terephthaldehyde ( 2 ). The degree of polymerization (DP) was controlled by the ratio of 1 to 2 at the given reaction time. Characterization was achieved by ¹H and ¹³C NMR and IR spectroscopy. The distribution of oxazolidine-acetal units in the polymer chain has been performed using ESI-MS. The activities of telechelic poly(oxazolidine-acetal) were determined in reaction oxidation (4-chloroperbenzoic acid), reduction (CH₃MgCl) and nucleophilic substitution (acylation, alkylation).     

Chemical upcycling of poly(lactide) plastic waste to lactate ester,lactide and new poly(lactide) under Mg-catalysis condition

Chemical upcycling of end-of-life poly(lactide) plastics to lactide, lactate ester and new poly(lactide) has been achieved by using magnesium bis[bis(trimethylsilyl)amide] [Mg(HMDS)₂] as promoter. Mg(HMDS)₂ showed high efficiency in l-lactide polymerization and poly(lactide) depolymerization. Mg(HMDS)₂/Ph₂CHOH catalytic system displayed high ring-opening selectivity and the characteristic of immortal polymerization. Taking advantage of transesterification, depolymerizations of end-of-life poly(lactide) plastics to lactate ester (polymer to value-added chemicals) and lactide (polymer to monomer) were achieved with high yields. Besides, a new “depolymerization-repolymerization” strategy was proposed to directly transform poly(lactide) into new poly(lactide). This work provides a theoretical basis for the design of polymerization and depolymerization catalysts and promotes the development of degradable polymers.     

Emulsion polymerization of vinyl acetate initiated by potassium persulfate-cyclohexanone sodium bisulfite redox pair system

The emulsion polymerization of vinyl acetate using potassium persulfate and cyclohexanone sodium bisulfite as redox pair initiation system was studied. The rate of polymerization, maximum conversion, and the number of polymer particles produced were found to change with redox initiator, monomer and emulsifier concentrations, and temperature variation. The rate of polymerization was found to be dependent on the initiator, the monomer, and the emulsifier concentrations to the 0.88, 0.22, and 0.20 powers, respectively. The K₂S₂O₈–NaHSO₃ redox system was found to decrease maximum conversion and doesn't form a stable emulsion. The apparent arrhenius activation energy (E^a) estimated for the polymerization system was 65.6 kJ/mol. The viscosity average molecular weights for some obtained poly(vinyl acetate) were determined.     

A soluble and multichromic conducting polythiophene derivative

A new soluble polythiophene derivative was synthesized by both chemical and electrochemical oxidative polymerization of 1-4-nitrophenyl-2,5-di(2-thienyl)-1H-pyrrole (SNSNO₂). Chemical method produces a polymer which is completely soluble in organic solvents. The structures of both the monomer and the soluble polymer were elucidated by ¹H and ¹³C-NMR and FTIR. The average molecular weight has been determined by GPC to be Mn = 6.3 × 10³ for the chemically synthesized polymer. P(SNSNO₂) was also synthesized via potentiostatic electrochemical polymerization. Characterizations of the resulting polymer were performed by cyclic voltammetry CV, FTIR and UV-Vis spectroscopy. Four-probe technique was used to measure the conductivities of the samples. Moreover, the spectroelectrochemical and electrochromic properties of the polymer film were investigated. In addition, dual type polymer electrochromic devices ECDs based on P(SNSNO₂) with poly3,4-ethylenedioxythiophene (PEDOT) were constructed. Spectroelectrochemistry, electrochromic switching and open circuit stability of the devices were studied. They were found to have good switching times, reasonable contrasts and optical memories.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Solubility of Solid 1-Hexyne in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 1-hexyne in liquid argon at 87.3 and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in 1-hexyne. The experimental value of the mole fraction solubility of solid 1-hexyne in liquid argon at 87.3 K is (0.85 ± 0.19) × 10^–7 and (1.25 ± 0.08) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for solid 1-hexyne than is liquid nitrogen.