聚1,5-二氨基蒽醌二次锂电池正极材料研究

采用化学氧化方法合成了聚1,5-二氨基蒽醌(PDAAQ)并用于二次锂电池.借助红外光谱确定其分子结构,实验测得材料的平均粒径为7.9μm,比表面积为8.9 m2.g-1,具有0.8 S.cm-1的电导率,符合作为电极材料使用的基本要求;电化学测试表明,作为二次锂电池正极材料使用时,聚合物重复单元中除了醌基团与Li+所发生的电化学氧化还原反应外,聚苯胺导电骨架也对PDAAQ的能量密度和循环性产生贡献.充放电曲线则进一步确定了聚苯胺骨架与醌基团协同作用的存在,实验表明,在Li(CF3SO2)2N/PC+DGDM电解液中,基于活性材料PDAAQ的首次放电容量达到221 mAh.g-1,经过40次充放电循环,容量保持率为80%,因此聚1,5-二氨基蒽醌具有较大应用潜力.     

SYNTHESIS AND CHARACTERIZATION OF POLY(ASPARTIC ACID) AND ITS DERIVATIVES AS BIODEGRADABLE MATERIALS

ABSTRACT

Three types of modified poly(aspartic acid)s, such as poly(aspartic acid-co-aminocarboxylic acid) (4), alkylamine modified poly(aspartic acid) (5) and crosslinked poly(aspartic acid) (6), were synthesized and calcium-ion chelating ability, hygroscopicity and water absorption were evaluated. The calcium-ion chelating ability of 4 depended on the kind of aminocarboxylic acids and the content of aminocarboxylic acid in the copolymer. The highest value was 3 times higher than that of poly(acrylic acid) with a M_w of 14000. The highly modified PASP, e.g., 50 mol% lauryl amine modified poly(aspartic acid), showed the highest by grogroscopicity among homopoly(aspartic acid)s and modified poly(aspartic acid)s. The maximum swelling of poly(aspartic acid) hydrogel prepared by the γ-irradiation of homopoly(as-partic acid) was 3400 g-deionized water/g-dry hydrogel.     

聚4—氨基联苯溶液的性质

本文报导了聚4-氨基联苯的电化学合成,测定了它的ESR、IR及紫外可见光谱。聚合物在THF、DMF和DMSO中能全部溶解。界面移动法测得聚4-氨基联苯的DMF饱和溶液中正离子的迁移率为1.48×10~(-8)m~2·S~(-1)·V~(-1)。     

SYNTHESIS,CHARACTERIZATION AND PHOTOLUMINESCENT PROPERTIES OF NEW PLATINUM-CONTAINING POLY(FLUORENYLENEETHYNYLENE) ANCHORED WITH CARBAZOLE PENDANTS

A new luminescent and thermally stable platinum(Ⅱ) polyyne polymer trans-[-Pt(PBu_3)_2C=CArC=C-]_n(P1) containing the 2,7-fluorene chromophoric spacer substituted by pendant carbazolyl group via long alkyl bridges. The regiochemical structures of these compounds were studied by various spectroscopic analyses.We report the photophysical properties of this group 10 polymetallayne and a comparison was made to its binuclear model complex trans-[Pt(Ph)(PEt_3)_2C≡CArC≡CPt(Ph)(PEt_3)_2](M1) as well as to those ...     

高分子固体电解质LiNO_3-LiOOCCH_3/聚丙烯酸锂的合成与性能研究

以丙烯酸和氢氧化锂为原料用反相乳液聚合法合成聚丙烯酸锂 (PAALi) ,将其熔于低共熔盐 (一定比例的LiNO3 LiOOCCH3混合物 )中得到新型高分子固体电解质 (SPE) ,用XRD、IR、DTA、TG DTG等技术进行了表征 ,讨论了影响合成PAALi工艺及新型固体电解质电阻率的主要因素 ,在LiNO3 LiOOCCH3摩尔比为 1∶1时 ,将其按质量百分比 80∶2 0与聚丙烯酸锂混合均匀并熔融 ,得到的电解质其室温离子电导率可达 2× 10 - 5S·cm- 1 ,大量低共熔盐的加入可明显提高SPE的离子导电率 .XRD、DTA及TG DTG结果表明低共熔盐与聚丙烯酸锂形成了新的配合物     

聚丙烯酸钠与聚(苯乙烯-co-4-乙烯基吡啶)阳离子复合作用的研究

聚电解质复合物 (Ｐｏｌｙｅｌｅｃｔｒｏｌｙｔｅｃｏｍｐｌｅｘ)是指带有相反电荷的两种聚电解质之间通过库仑力而结合形成的一类特殊的高分子材料[1 ] .由于生物体内的很多反应以及生物化学合成过程都是通过高分子复合物进行的 ,因此对高分子间相互作用及其聚集体形成的研究受到了人们的极大重视 .目前研究得较多的体系是聚苯乙烯衍生物 ,如Ｉｏｐｌｅｘ 1 0 1即由聚苯乙烯磺酸钠和聚氯化乙烯基苄基三甲基铵反应而得[2 ,3] .本文报道了不同电荷密度及相对分子质量的聚苯乙烯 ｃｏ 4 乙烯基吡啶的硫酸甲酯盐 ,与不同分子质量的聚丙烯酸钠…     

SYNTHESIS, CHARACTERIZATION OF CHIRAL POLY（ESTER AMIDE）S DERIVED FROM L-ISOLEUCINE

A series of new optically active aromatic poly(ester arnide)s containing a chiral group in the side chain prepared from the p-toluenesulfonic acid salt of o,o‘-bis(leucyl)-hexanediol (TS^- LHD^ TS^-) and p-phthaloyl chloride and styrene-2,5-dicarbonyl chloride styrene have been synthesized by interfacial polymerization. The structure of the monomer is elucidated by FT-IR and elemental analysis. The thermal properties of the polymers were studied by DSC and TGA. The chiroptical properties of the above polymer have also been studied by circular dichroism (CD) spectroscopy. Results indicated that these polymers form helical structures.     

L-丙交酯-β-苹果酸共聚物的体外降解及细胞亲和性研究

研究了具有功能侧基的新型生物降解高分子——— [聚 (L 丙交酯 co β 苹果酸 ) ](PLMA)在pH 7 4的磷酸缓冲溶液中的降解和鼠的 3T3成纤维细胞在共聚物膜表面的贴附及生长 .研究了不同组成的共聚物在降解过程中的失重、表面形貌、组成及分子量变化 ,发现PLMA为本体降解 ,共聚物中苹果酸含量的提高可以加速降解 ,降解过程中聚苹果酸 (PMA)链段附近的酯键先水解断裂 .鼠的 3T3成纤维细胞在聚L 丙交酯 (PLLA)均聚物和苹果酸含量为 4mol% ,8mol%和 13mol%的共聚物膜上培养 5h ,细胞贴附率分别为 4 3%、71%、80 %和 4 3% .3T3成纤维细胞在苹果酸含量为 4mol%和 8mol%的共聚物膜上的生长情况好于在PLLA均聚物和苹果酸含量为 13mol%含量的共聚物膜上的生长 .     

SO_4~(2-)/ZrO_2催化剂上正丁烷异构化反应

考察了活化温度、反应温度、空速、Ｈ２／Ｃ４比和载Ｐｔ对ＳＯ２－４／ＺｒＯ２催化剂的正丁烷异构化反应活性和稳定性的影响．较高的Ｈ２／Ｃ４比可提高ＳＯ２－４／ＺｒＯ２催化剂的稳定性和稳态活性．催化剂负载Ｐｔ后，可降低反应原料中的Ｈ２／Ｃ４比．积炭是造成反应初始阶段催化剂迅速失活的主要原因，经烧炭再生以后这部分失活可以完全恢复     

基于2,5-二(4-氨基苯)嘧啶聚酰亚胺的合成及性能表征

1,5-二氮杂戊二烯盐(vinamidium salts)与4-硝基苯甲脒盐在碱性物质的存在下发生成环反应得含嘧啶环的硝基化合物;硝基化合物用Pd/C和水合肼还原得到棒状含氮芳杂环二胺——2,5-二(4-氨基苯基)嘧啶.通过1H-NMR,13C-NMR,IR,MS及元素分析确证了含氮芳杂环二胺及其中间产物的结构.这种二胺或加一定量对苯二胺与均苯二酐(PMDA)或联苯二酐(BPDA)通过两步法聚合获得一系列聚酰亚胺,通过红外、动态力学、静态力学、热重分析、广角X射线衍射等实验测试了该类聚合物的结构、热性能、机械性能及结晶性能.     

IONIC CONDUCTIVITY IN CROSSLINKED POLY (METHYLSILOXANE-g-ETHYLENE OXIDE) NETWORK FILMS CONTAINING LITHIUM PERCHLORATE

Polymer electrolytes based on poly (methylsiloxane-g-ethylene oxide) and LiClO_4 have been prepared. The network films crosslinked by a crosslinking agent are found to exhibit a considerably high ionic conductivity of about 10~(-4) Scm~(-1) at room temperature and have good flexibility.     

SURFACE MULTI-FUNCTIONALIZATION OF POLY(LACTIC ACID) NANOPARTICLES AND C6 GLIOMA CELL TARGETING in vivo

Polysaccharide coated PLA nanoparticles bearing aldehyde groups were prepared by dialysis of DMSO solution of cholesterol hydrophobic-modified dextran polyaldehyde and PLA against water.The average diameter of the nanoparticles was about 160 nm,and the size distribution was nearly homogenous.The nanoparticles were functionalized simultaneously with CD71 and EGFR antibody through the Schiff's base reaction,and then radiolabeled with ~(99m)Tc.After perfused the radiolabeled nanoparticles into tumor-bearing...     

聚糠醇炭分子筛膜的制备及O_2/N_2分离性能研究

以草酸为催化剂将糠醇单体直接聚合成所需黏度的聚糠醇液体作为涂膜液,仅需一步涂覆便可在价格低廉的煤基炭管支撑体上制备出高性能的聚糠醇炭分子筛膜.聚糠醇炭分子筛膜的热解过程、微观形貌和分离性能分别采用热重分析、扫描电镜以及O2、N2渗透实验进行表征.实验结果表明制备出的聚糠醇炭分子筛膜表面均匀且无缺陷.聚糠醇在热解过程中最终转化成具有超微孔的乱层石墨微晶结构.热解温度升高导致了起分离作用的有效超微孔尺寸的减小,进而表现出O2、N2的渗透速率逐渐降低,O2/N2的选择性逐渐增大的趋势.不同热解温度下制备的炭分子筛膜的O2渗透性和O2/N2选择性之间关系均超出了传统聚合物膜的Robeson上限.     

PREPARATION OF POLY（ETHYLENEGLYCOL-co-ACRYLIC ACID） MICROSPHERES WITH DIVINYLBENZNE AS CROSSLINKER BY DISTILLATION-PRECIPITATION POLYMERIZATION

Monodisperse poly（poly（ethyleneglycol） methyl ether acrylate-co-acrylic acid） （poly（PEGMA-co-AA）） microspheres were prepared by distillation-precipitation polymerization with divinylbenzene （DVB） as crosslinker with 2,2＇- azobisisobutyronitrile （AIBN） as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY(ETHER KETONE)S CONTAINING 3,5-DIMETHYL PHTHALAZINONE MOIETIES AS PROTON EXCHANGE MEMBRANE MATERIALS

Sulfonated poly（ether ketone）s containing 3,5-dimethyl phthalazinone moieties（SPPEK-DMs）with different degrees of sulfonation（DS）were synthesized via direct polycondensation from 4-（3,5-dimethyl-4-hydroxyphenyl）-2,3- phthalazinone,4,4’-difluorobenzophenone and 3,3’-disulfonate-4,4’-difluorobenzophenone.The chemical structure of SPPEK-DMs was characterized by FTIR and ¹H-NMR.Thermal stability of SPPEK-DMs was characterized by the thermogravimetric analysis.The membranes prepared from SPPEK-DMs exhibited ion exchange capacities（IEC）ranging from 0.93 mmol·g^-1to 1.86 mmol·g^-1.Water uptake,swelling,oxidative stability and methanol permeability of SPPEKDMs membranes were investigated.SPPEK-DMs membranes exhibited high oxidative stability.The methanol permeability values of SPPEK-DMs membranes were in the ranee 5.15×10^-8-6.61×10^-7cm s,which was much lower than those of Nafionl 17.The proton conductivity of SPPEK-DM40 membranes was 1.1×10^-2Scm^-1at 70℃.     

含三价铕荧光络合物与聚甲基丙烯酸甲酯的发光材料

用荧光性能优异的Eu(TTA) 3 ·2TPPO络合物与聚甲基丙烯酸甲酯 (PMMA)制备了一系列发出红色荧光的光致发光材料 .荧光测定结果表明 :PMMA膜的荧光强度随膜中络合物含量的增加而增大 .红外光谱研究表明络合物与PMMA之间存在相互作用 .透射电镜观测结果表明络合物在复合膜中是以亚微米颗粒分散的 .     

STUDY ON THE PREPARATION AND PERFORMANCES OF P(VAc-MMA) POLYMER ELECTROLYTES FOR LITHIUM ION BATTERY

A random copolymer P(VAc-MMA)was synthesized via seeded emulsion copolymerization with vinyl acetate (VAc)and methyl methacrylate(MMA)as monomers,and the polymer electrolytes comprising blend of corresponding copolymer P(VAc-MMA)as a host polymer and LiClO_4 as a dopant were prepared by solution casting technique. Performances of the synthesized copolymer and prepared polymer membrane and electrolyte were studied by FTIR,XRD, TG,DSC,mechanical testing and AC impedance.According to the study of FTIR and D...     

含甲基磺化杂萘联苯聚醚砜酮质子交换膜材料的合成与性能

以4-(3,5-二甲基-4-羟基苯基)2,3-二氮杂萘-1-酮,3,3′-二磺酸钠-4,4′-二氟苯甲酮和4,4′-二氯二苯砜为原料,利用亲核缩聚反应,通过改变磺化单体的含量,制备出一系列不同磺化度的杂萘联苯聚醚砜酮(SPPESK-DM).采用FTIR、1H-NMR表征了聚合物的结构,热失重分析仪研究了聚合物的耐热稳定性,以N-甲基-2-吡咯烷酮为溶剂采用溶液浇铸法成膜研究该系列聚合物膜的性能.结果表明,SPPESK-DM磺酸基的热分解温度在260℃以上,主链分解温度在410℃以上;膜的吸水率、溶胀率、离子交换容量和质子传导率均随着磺化度的增大而增大,磺化度为1.0的SPPESK-DM50的质子传导率达到1.08×10-2S/cm(85℃),且甲醇渗透系数为2.06×10-7cm2/s,低于Nafion117膜的甲醇渗透系数(2×10-6cm2/s).此系列膜的耐氧化性比较优异,可望用于质子交换膜燃料电池中.