Enzymatically Synthesized Conducting Polyaniline Nanocomposites: A Solid‐State NMR Study

Abstract

The chiral conducting polyaniline (PANI) nanocomposites [polyacrylic acid/polyaniline/(?) camphorsulphonic acid (CSA)] were synthesized using enzyme, horseradish peroxidase (HRP) in the aqueous buffer solution at pH 4.3. It appears that the enzyme HRP apart being a biocatalyst, plays an important role during the polymerization, which allows PANI to prefer a specific helical conformation whether the induced chirality in the monomer‐CSA complex is either by (+)CSA or (?)CSA. In this paper, we report, the structural characterization of these nanocomposites by solid‐state ¹³C cross‐polarization with magic angle spinning (CP/MAS) NMR techniques. The structural features of PANI in the conducting form of nanocomposite (as‐synthesized) are similar to that of enzymatically and chemically synthesized PANI. Preliminary data also suggest that some portion of nanocomposite samples are not completely doped. Dedoping of as‐synthesized PANI nanocomposite with aqueous NH₄OH shows the spectral features that of the emeraldine base form. Solid‐state ¹³C NMR data suggest that it is possible to detach PAA and CSA from PANI in the nanocomposite material.     

Solid-state C NMR and molecular modeling studies of acetyl aleuritolic acid obtained from Croton cajucara Benth

Solid-state ¹³C nuclear magnetic resonance (¹³C NMR) with magic-angle spinning (MAS) and with cross-polarization and magic-angle spinning (CP/MAS) spectra, and differential scanning calorimetry (DSC) techniques were used to obtain structural data from a sample of acetyl aleuritolic acid (AAA) extracted from the stem bark of Croton cajucara Benth. (Euphorbiaceae) and recrystallized from acetone. Since solid-state ¹³C NMR results suggested the presence of more than one molecule in the unitary cell for the AAA, DSC analysis and molecular modeling calculations were used to access this possibility. The absence of phase transition peaks in the DSC spectra and the dimeric models of AAA simulated using the semi-empirical PM3 method are in agreement with that proposal.     

Solid-state NMR studies of pharmaceutical solids in polymer matrices

Biodegradable drug-delivery systems can be formulated to release drug for hours to years and have been used for the controlled release of medications in animals and humans. An important consideration in developing a drug-delivery matrix is knowledge of the long-term stability of the form of the drug and matrix after formulation and any changes that might occur to the drug throughout the delivery process. Solid-state NMR spectroscopy is an effective technique for studying the state of both the drug and the matrix. Two systems that have been studied using solid-state NMR spectroscopy are presented. The first system studied involved bupivacaine, a local anesthetic compound, which was incorporated into microspheres composed of tristearin and encapsulated using a solid protein matrix. Solid-state ¹³C NMR spectroscopy was used to investigate the solid forms of bupivacaine in their bulk form or as incorporated into the tristearin/protein matrix. Bupivacaine free base and bupivacaine-HCl have very different solid-state NMR spectra, indicating that the molecules of these compounds pack in different crystal forms. In the tristearin matrix, the drug form could be determined at levels as low as 1:100 (w/w), and the form of bupivacaine was identified upon loading into the tristearin/protein matrix. In the second case, the possibility of using solid-state ¹³C NMR spectroscopy to characterize biomolecules lyophilized within polymer matrices is evaluated by studying uniformly ¹³C-labeled asparagine (Asn) in 1:250 (w/w) formulations with poly(vinyl pyrrolidone) (PVP) and poly(vinyl alcohol) (PVA). This work shows the capability of solid-state NMR spectroscopy to study interactions between the amino acid and the polymer matrix for synthetic peptides and peptidomimetics containing selective ¹³C labeling at the Asn residue.     

Solid-state Na and C NMR characterization of Na3C60

Two separate samples of Na₃C₆₀ were prepared by direct reaction of C₆₀ with sodium metal vapor, and subjected to different annealing times of 10 days and 16 days. Solid-state ¹³C and ²³Na NMR, along with elemental analysis, powder X-ray diffraction (XRD) and Raman spectroscopy, were used to characterize both samples. The Raman spectra of both materials have a single peak at 1447 cm⁻¹ which correspond to the A_g peak of C₆₀³⁻, consistent with the stoichiometry of Na_xC₆₀ with x=3. The powder XRD patterns are also virtually identical for both samples. However, solid-state ²³Na and ¹³C NMR spectra of the two samples are significantly different, suggesting a relationship between annealing times and the final structure of the alkali fulleride. Variable-temperature ²³Na magic-angle spinning (MAS) NMR experiments reveal the existence of two or three distinct sodium species and reversible temperature-dependent diffusion of sodium ions between octahedral and tetrahedral interstitial sites. ¹³C MAS NMR experiments are used to identify resonances corresponding to free C₆₀ and fulleride species, implying that the samples are segregated-phase materials composed of C₆₀ and non-stoichiometric Na₃C₆₀. Variable-temperature ¹³C MAS NMR experiments reveal temperature-dependent motion of the fullerides.     

Interaction and Scale of Mixing in Cellulose Acetate/Poly(<Emphasis Type="Italic">N</Emphasis>-vinyl Pyrrolidone-co-vinyl Acetate) Blends

Binary blends and pseudo complexes of cellulose acetate (CA) with vinyl polymers containing N-vinyl pyrrolidone (VP) units, poly(N-vinyl pyrrolidone) (PVP) and poly(N-vinyl pyrrolidone-co-vinyl acetate) [P(VP-co-VAc)], were prepared, respectively, by casting from mixed polymer solutions in N,N-dimethylformamide as good solvent and by spontaneous co-precipitation from solutions in tetrahydrofuran as comparatively poor solvent. The scale of miscibility and intermolecular interaction were examined for the blends and complexes by solid-state ¹³C-NMR spectroscopy. It was revealed that the formation of complexes was due to a higher frequency of hydrogen-bonding interactions between the residual hydroxyl groups of CA and the carbonyl groups of VP residues in the vinyl polymer component. From measurements of CP/MAS spectra and proton spin-lattice relaxation times (T_1ρ^H) in the NMR study, the existence of the hydrogen-bonding interaction was also confirmed for the miscible blends and the homogeneity of the mixing was estimated to be substantially on a scale within a few nanometers.     

Synthesis and properties of conducting organic/inorganic polyurethane hybrids

A series of polyurethane/polyaniline/silica organic/inorganic hybrids were synthesized via the conventional polyurethane (PU) prepolymer technique. Amine-endcapped polyaniline (PANI) with low molecular weight and higher solubility was firstly synthesized. This PANI oligomer was then used together with nano-silica bearing silanol groups as chain extenders to prepare the conducting polyurethane hybrids. The polyurethane hybrids were designated as PU-xPANI-ySiO₂ (x + y = 1). For comparison, the urethane-aniline block copolymer and the PU/silica hybrid were designated as PU-PANI and PU-SiO₂, respectively.The structures of PU-PANI, PU-SiO₂ and conducting polyurethane hybrids were confirmed by FT-IR, solid-state ¹³C, and ²⁹Si NMR spectra. In nano-silica containing organic/inorganic conducting polyurethane hybrids, UV-vis spectra revealed the maximum absorption bands similar to that of PU-PANI. X-ray diffraction patterns indicated that these samples are typical of semicrystalline/amorphous materials. SEM image of PU-0.5PANI-0.5SiO₂ showed that PANI was dispersed homogeneously and interconnected continuously in the insulating PU-silica matrix. TGA results of the polymer hybrids exhibited higher thermal stabilities and lower decomposition rates than that of PU-PANI both in nitrogen and air. Differential scanning calorimetry (DSC) studies indicated that the polyurethane hybrids had higher glass-transition temperatures (T_g) with the increase of PANI, but lower than that of PU-PANI. Stress-strain curves for all of the polyurethane hybrids showed the elastomeric behavior of typical polyurethanes. The surface resistivity values of all hybrids were about 10⁸ ∼ 10¹⁰ Ω/sq. and might meet the requirement of the anti-electrostatic materials.     

Search of structure and ligands exchange for palladium(II) complexes with N-allylimidazole; X-ray and solid-state/solution NMR studies

Two coordination compounds of palladium(II) with N-allylimidazole (l) of the general formula [PdL₄]Cl₂ · 3H₂O (1) and trans-[PdL₂Cl₂] (2) have been synthesized. The crystal and molecular structure of complexes 1 and 2 was established by single-crystal X-ray diffraction analysis. The X-ray structural data were supplemented by solid-state ¹³C NMR measurements (CP MAS and PASS 2D). The 1D and 2D NMR studies in solution reveal that complex 1 is unstable at room temperature and undergoes reversible decomposition to 2. The method for how to preserve a complex with four allyl-imidazole ligands in solution is shown.     

Poly(bismethylene hydroquinone) (PBHQ). I. Synthesis and characterization

Poly(bismethylene hydroquinone) (PBHQ) has been synthesized. Fourier transform infrared, ¹³C solid-state CP/MAS NMR and elemental analysis provide strong evidence of two methylene bridges per hydroquinone molecule. The polymer was (1) air oxidized using ammonia and (2) chemically oxidized using bromine/KOH. The initial structure and oxidation process was studied by comparison of the unoxidized and oxidized polymers using Fourier transform infrared, elemental analysis, and ¹³C solid-state CP/MAS NMR.     

Solid State NMR of Drugs: Soluble Aspirin

Abstract

Natural abundance ¹³C NMR spectra of a soluble aspirin and model mixtures of acetylsalicylic acid with buffering components have been recorded in the solid state by using the combined techniques of cross polarization, high-power decoupling and magic-angle spinning. The solid-state spectrum of the soluble aspirin tablet showed more resonances than the solution spectrum. These multiplicities were originated in the buffer mixture containing citric and tartaric acid, as well as their salts. Solid-state ¹³C NMR was therefore found to provide information that is lost in the solution spectrum due to the fast proton exchange between the organic acids and their conjugated salts.     

Investigation of the chemical modifications of beech wood lignin during heat treatment

Holocellulose, Klason lignin and milled wood lignin (MWL) of beech wood were extracted before and after heat treatment and analysed using CP MAS ¹³C NMR, ¹³C NMR, ³¹P NMR and size exclusion chromatography (SEC). Experimental results showed that the thermal treatment degrades hemicelluloses and affects lignin polymer through depolymerisation due mainly to cleavage of β-aryl-ether linkages and recondensation reactions. The spectroscopic analysis of MWL demonstrated that these recondensation reactions involved mainly guaiacyl units through formation of 5,5′-biphenolic and diarylmethane structures.Analysis of molecular weight distribution of MWL by SEC indicated that average molecular weights of heat treated milled wood lignin were lower than those of native milled wood lignin.     

Solid-state Al NMR investigation of thermal decomposition of LiAlH4

Solid-state nuclear magnetic resonance is used to study the thermal decomposition of lithium tetrahydroaluminate into metallic aluminum, hydrogen and trilithium hexahydroaluminate. Aluminum sites in LiAlH₄ and Li₃AlH₆ were characterized using static, magic angle spinning (MAS) and multiple-quantum MAS NMR. By applying the in situ NMR method, it has been demonstrated that melting is not a prerequisite for the decomposition of LiAlH₄. Based on the observed data, a decomposition path has been established that is consistent with the concentrations of observed Al species at various stages of the thermally induced reaction.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

Synthesis and characterization of polyaniline nanoparticles in phosphonic acid amphiphile aqueous micellar solutions for waterborne corrosion protection coatings

Polyaniline (PANI) dispersions consisting of 270 to 380 nm sized particles were prepared by oxidation with ammonium peroxydisulfate (APS) in n‐decylphosphonic acid (DPA) micellar solutions. The green dispersions do not undergo macroscopic precipitation for more than a year. The synthesized DPA doped PANI exhibited enhanced electrical conductivity (3.6 S cm^?1 ) compared with DPA‐PANI (2.3 x 10 ^{? 4} S cm ^{? 1}) prepared by postsynthesis treatment of the PANI‐base with DPA. It was shown that through protonation with decylphosphonic acid, polyaniline showed a significantly enhanced solubility in common organic solvents like chloroform, xylene, etc. The synthesized PANI was characterized by intrinsic viscosity, solubility, FT‐IR , conductivity, SEM , and TGA measurements. The wide‐angle X ‐ray diffraction study revealed the appearance of a peak located at low angles (d = 29.4 – 35.3 Å) suggesting the formation of layered structure of PANI backbone separated by long alkyl side chains of DPA. The anticorrosive performance of the bilayer coatings composed of a bottom layer of DPA doped polyaniline covered with a polyvinyl butyral topcoat, have been demonstrated for steel exposed to neutral saline solutions. It was found that the inhibitive properties of DPA dopant provides further protection to the base metal through smart release when damage is produced on the surface of the coating. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1606–1616     

In situ 13C solid-state polarization transfer NMR to follow starch transformations in food

Convenience food products tend to alter their quality and texture while stored. Texture-giving food components are often starch-rich ingredients, such as pasta or rice. Starch transforms depending on time, temperature and water content, which alters the properties of products. Monitoring these transformations, which are associated with a change in mobility of the starch chain segments, could optimize the quality of food products containing multiple ingredients. In order to do so, we applied a simple and efficient in situ ¹³C solid-state magic angle spinning (MAS) NMR approach, based on two different polarization transfer schemes, cross polarization (CP) and insensitive nuclei enhanced by polarization transfer (INEPT). The efficiency of the CP and INEPT transfer depends strongly on the mobility of chain segments—the time scale of reorientation of the CH-bond and the order parameter. Rigid crystalline or amorphous starch chains give rise to CP peaks, whereas mobile gelatinized starch chains appear as INEPT peaks. Comparing ¹³C solid-state MAS NMR experiments based on CP and INEPT allows insight into the progress of gelatinization, and other starch transformations, by reporting on both rigid and mobile starch chains simultaneously with atomic resolution by the ¹³C chemical shift. In conjunction with ¹H solid-state MAS NMR, complementary information about other food components present at low concentration, such as lipids and protein, can be obtained. We demonstrate our approach on starch-based products and commercial pasta as a function of temperature and storage.     

Suitability of Different 13C Solid-state NMR Techniques in the Characterization of Humic Acids

Qualitative and quantitative analyses of humic acids (HAs) with five different ¹³C solid-state NMR techniques were assessed using HAs of various origins and locations. The NMR techniques compared are: (1) direct polarization/magic angle spinning (DP/MAS) at 13 kHz, (2) conventional cross polarization (CP)/MAS at 5 kHz, (3) ramp-CP/MAS at 8 kHz, (4) CP/total sideband suppression (TOSS) at 4.5 kHz, and (5) DP/MAS corrected by CP/spin-lattice relaxation with TOSS. The spectra from the five techniques were first compared qualitatively. Then, each spectrum was divided into eight regions for quantitative evaluation. DP/MAS spectra were used as quantitative references. Ramp-CP/MAS and CP/TOSS spectra gave consistently better results than those of the conventional CP/MAS spectra at a ¹³C frequency of 75 MHz, which were incorrect due to spinning sidebands. CP/MAS at low magnetic fields (22.6 and 50.6 MHz ¹³C frequency) indicated improved integration results but lower resolution. Correction factors calculated by comparison with DP/MAS will be useful to convert the non-quantitative peak areas in the CP/TOSS and ramp-CP/MAS spectra into more quantitative results.     

光固化聚氨酯丙烯酸酯杂化材料的核磁共振谱

光固化聚氨酯丙烯酸酯杂化材料的核磁共振谱;SiO2;溶胶-凝胶法     

Preparation of β-cyclodextrin-polyaniline complex in supercritical CO2

A method is proposed to prepare β-cyclodextrin (β-CD)/polyaniline (PANI) inclusion complex. In this route, benzoyl peroxide (BPO, the oxidant) is first encapsulated into the cavity of β-CD. Aniline is then carried into the cavity of β-CD by supercritical (SC) CO₂, which polymerizes in situ to form inclusion complex. The product is characterized by FT-IR, UV-Vis, ¹H NMR and XRD techniques. The results suggest that the columnar inclusion complexes may be formed.     

Polymerization of aniline by copper‐catalyzed air oxidation

A novel method for preparing organosoluble and conducting polyaniline (PANI) is presented. It is demonstrated that Cu(II) is an excellent catalyst for the polymerization of aniline by air oxygen in aqueous emulsions. Reactions carried out at 0 °C or at room temperature yield PANIs of reasonably high molecular weights (number‐average molecular weight = 23,000–114,000 Da) in an emeraldine base form that are soluble in many organic solvents, such as tetrahydrofuran, dimethylformamide, N‐methylpyrrolidinone, chloroform, and acetone. Spectroscopic investigations (ultraviolet, Fourier transform infrared, and ¹H NMR) have shown that PANI obtained by this procedure has the same structure as those prepared by the conventional persulfate oxidation method. The resulting PANIs show reasonable electronic conductivities (0.067–0.320 S cm^?1) upon doping with p‐toluenesulfonic acid or dodecyl benzene sulfonic acid. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6025–6031, 2006     

Synthesis,characterization and properties of methylaminocellulose

Homogeneously prepared tosylcelluloses (TC) with degrees of substitution (DS) of DS_Tos 0.1–1.8 were used as intermediates for the synthesis of methylaminocelluloses (MAC) by nucleophilic substitution with methylamine. TC with DS_Tos up to 1.1 were shown to be valuable intermediates for selective synthesis of MAC with DS_MA varying from 0.1 to approximately 1. No nucleophilic substitution was observed at higher DS_Tos. At the chosen reaction conditions (60 °C, 48 h) residual tosyl moieties remained unchanged and little hydrolysis took place. The samples obtained were characterized by means of elemental analysis, FTIR and ¹³C CP/MAS NMR spectroscopy. ¹³C CP/MAS NMR spectroscopy was found to be an efficient tool for quantification of DS_MA. Furthermore, the swelling behaviour in water was investigated and preliminary tests concerning the bilirubin adsorption capacity of MAC were carried out.     

Synthesis and characterization of red mud/polyaniline composites: Electrical properties and thermal stability

New types of conducting composites using red mud as an inorganic substrate and polyaniline as the conducting phase were prepared. Red mud/polyaniline (RM/PANI) composites were synthesized in acidic aqueous solution by the chemical oxidative polymerization of aniline using ammonium peroxydisulfate as the oxidant. The composites exhibit conductivities in the 0.42-5.2 S cm⁻¹ range, depending on the amount of polyaniline. They were characterized by infrared and UV-vis spectroscopy, scanning electron microscopy and X-ray diffraction. The IR and X-ray results show that PANI is deposited on the RM surface. The composites have a globular structure and the PANI globules synthesized on the surface of RM are smaller than those prepared under the same conditions without the substrate. Thermogravimetric analysis was used for investigation of the thermal stability of the composites. The thermal stability of the conductivity of RM/PANI composites was studied by ageing at 125 °C, the conductivity being measured in situ during this process.