Nanoporous Crosslinked Copolymers Prepared by Thermal Degradation of Poly(Methacryl‐N,N′‐diisopropylurea‐co‐ethylene Glycol Dimethacrylate)

Abstract

Copolymers of methacryl‐N,N′‐diisopropylurea (MA‐DiPrU) with ethylene glycol dimethacrylate (EDMA) at monomer‐to‐monomer ratios in the feed: 0.3/0.7; 0.5/0.5; 0.7/0.3; 0.8/0.2 were prepared in butanone in the presence of 2% of dibenzoyl peroxide (Bz₂O₂) at 70°C for 48?hr. Copolymers regardless of the ratio of comonomers in the feed decompose thermally at 200–250°C under the separation of isopropylisocyanate (iPrNCO). Residues after the removal of iPrNCO are thermally stable nanoporous crosslinked copolymers of methacryl‐isopropylamide (MA‐iPrA) with EDMA which decompose by a one‐step mechanism between 280°C and 450°C. Nonporous model copolymers poly(MA‐iPrA‐co‐EDMA) of similar composition, prepared by copolymerization of MA‐iPrA with EDMA, also decomposed by a one‐step mechanism as shown by TGA measurements.     

Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

Novel Copolymers of Styrene and Some Halogen Ring-substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH═C(CN)₂ (where R is 2-bromo,3-bromo, 3-chloro, 2,3-dichloro, 2-chloro-6-fluoro, 2,6-difluoro, 3,4-difluoro, and 3,5-difluoro) and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. High T _g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 200–800°C range.     

Novel Copolymers of Vinyl Acetate and Halogen Ring‐Disubstituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, halogen ring‐disubstituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₃CH?C(CN)₂ (where R is 2,3‐diCl, 2,4‐diCl, 2,6‐diCl, 3,4‐diCl, 3,5‐diCl, 2,4‐diF, 2,5‐diF, 2,6‐diF, 3,4‐diF, 3,5‐diF, 2‐Cl, 6‐F) were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T_g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 220–800°C range.     

Novel Copolymers of Styrene and Halogen Ring‐Disubstituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, halogen ring‐disubstituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₃CH?C(CN)CON(CH₃)₂ (where R is 2,3‐dichloro, 2,4‐dichloro, 2,6‐dichloro, 3,4‐dichloro, 3,5‐dichloro, 2,3‐difluoro, 2,4‐difluoro, 2,6‐difluoro, 3,4‐difluoro, 3,5‐difluoro), were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Novel random poly(propylene isophthalate/adipate) copolyesters: Synthesis and characterization

Poly(propylene adipate) (PPA) and poly(propylene isophthalate/adipate) (PPI-PPA) random copolymers of various compositions were synthesized in bulk and characterized in terms of chemical structure and molecular weight. Furthermore, the thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability. At room temperature they appeared as semicrystalline materials, except the copolymers containing 20 and 30 mol% of PI units: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. The crystalline phase of PPI and PPA was evidenced at high content of propylene isophthalate or propylene adipate units, respectively. Amorphous samples were obtained after melt quenching and an increment of T_g as the content of PI units is increased was observed. This behavior was explained as due to the stiff phenylene groups in the polymeric chain. The Wood equation was found to describe well T_g-composition data. Lastly, the presence of a rigid-amorphous phase was evidenced in the copolymers, differently from PPA homopolymer.     

High Conversion Copolymerization of α-Methylstyrene with N-Methylmaleimide Or N-Phenylmaleimide

High conversion copolymerization of α-methylstyrene (α-MeSt) with N-methylmaleimide (NMeMl) or VV phenylmaleimide (NPhM1) was performed in a Calvet differential microcalorimeter under different ratios of monomer-to-monomer in the feed by using 2,2-azobis(isobutyronitrile) (AIBN) as the initiator. From a tracing of the electric signal of the calorimeter it was observed that in the presence of an excess of NMeMl or NPhMl, alternating copolymerization was the first reaction, and homopolymerization started only after the copolymerization was finished. The calorimetric method is therefore a convenient procedure for the preparation of blends of alternating copolymers with homopolymers of NMeM1 or NPhM1 of predetermined composition. Preliminary experiments indicate that based on a single T _g criterion, blends prepared within this work are miscible.     

Synthesis of novel cyclic olefin polymers with excellent transparency and high glass‐transition temperature via gradient copolymerization of bulky cyclic olefin and cis‐cyclooctene

Novel cyclic olefin polymers (COPs) with excellent transparency and high glass‐transition temperature (T_g) synthesized from bulky norbornene derivative, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1',2')‐benzeno‐l,4‐methanoanthracene (HBMN), and cis‐cyclooctene (COE) by ring‐opening metathesis copolymerization utilizing the “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh), and subsequent hydrogenation was reported herein. To get amorphous copolymers, it was of great importance to control the feed ratios and the polymerization time for gradient copolymerization. All these copolymers showed very high T_gs (141.1–201.2 °C), which varied with the content of HBMN. The films of the gradient copolymers with only one T_g were highly transparent. On the contrary, all the block copolymers synthesized through sequential addition showed two thermal transition temperatures, T_g and melt temperature (T_m), and the films of these block copolymers were opaque. The mechanical performances of the COPs were also investigated. It is the first report that transparent COP could be prepared from bulky norbornene derivative and monocyclic olefin. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3240–3249     

Copolymerization of N-Vinylcarbazole and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Summary: The reversible addition–fragmentation chain transfer (RAFT) random copolymerization of N-vinylcarbazole (NVC) and vinyl acetate (VAc) was carried out using s-benzyl-o-ethyl dithiocarbonate (BED) as the chain transfer agent and 2,2′-azoisobutyronitrile (AIBN) as the initiator in 1,4-dioxane solution at 70 °C. The polymerization showed the characteristics of ‘living’ free radical polymerization behaviors: first order kinetics, linear relationships between molecular weight and conversion, and narrow polydispersity of the polymers. The reactivity ratios of NVC and VAc were calculated via the Kelen–Tudos (KT) and non-linear error in variable (EVM) methods and showed as r₁ = 1.938 ± 0.191, r₂ = 0.116 ± 0.106. The thermal behavior of the copolymers with different content of NVC and VAc was investigated by DSC and TGA. The results showed that the introduction of a VAc segment into copolymer significantly reduced the T_g of the NVC homopolymers. FT-IR spectra, fluorescence spectra, and cyclic voltammetric behavior of these copolymers were also measured and compared with those of NVC homopolymers. The copolymers showed similar oxidative behavior to the NVC homopolymer. However, there was only one reductive potential peak shown for the copolymers at about 0.058 V.     

Property modification of poly(methyl methacrylate) through copolymerization with fluorinated aryl methacrylate monomers

Copolymers of methyl methacrylate (MMA) with 2,3,5,6‐tetrafluorophenyl methacrylate (TFPMA), pentafluorophenyl methacrylate (PFPMA), and 4‐trifluoromethyl‐2,3,5,6‐tetrafluorophenyl methacrylate (TFMPMA) were investigated. All the three systems showed a random copolymerization character. The composition, glass transition temperature (T_g), and refractive index of the copolymers obtained were studied. T_gs of TFPMA/MMA and PFPMA/MMA copolymers were found to deviate positively from the Gordon–Taylor equation. However, T_gs of TFMPMA/MMA copolymers were well fit with the Gordon–Taylor equation. These results indicated the existence of interaction between MMA and either TFPMA or PFPMA units in copolymers. This interaction resulted in the enhancement of the T_g of MMA polymers through the copolymerization with TFPMA and PFPMA. The refractive index and the light transmittance of copolymers were close to those of PMMA. Copyright © 2007 John Wiley & Sons, Ltd.     

丙交酯-乙交酯共聚中的酯交换及共聚物结构和性质研究

以辛酸亚锡为催化剂 ,通过本体开环聚合合成了不同摩尔比的DL 丙交酯 乙交酯 (DL LA GA)共聚物 (PDL LGA) .1 H和1 3C NMR以及DSC结果表明 ,共聚物中GA结构单元的含量略高于按GA投料比计算的结果 ,聚合过程中存在二级酯交换反应 .当聚合温度为 16 0℃时 , GG 序列的平均长度 (lGG)随GA摩尔投料比增大而增长 ,而 LL 序列的平均长度 (lLL)则相反 .研究发现 ,随着GA摩尔投料比降低 , LL 单元的二级酯交换系数 (TⅡ[GLG])下降 ,至GA摩尔投料比达到为 5 0 %时最小 ,而后却逐渐增大 .L LA与GA在同样的条件下聚合 ,TⅡ[GLG]和lGG 都比DL LA与GA聚合的大 .聚合温度升高 ,TⅡ[GLG]增大 ,意味着二级酯交换反应加剧 ,但DL LA GA摩尔投料比较高 (75 2 5 )的共聚物的lGG 值有所下降 ,lLL值变化不大 ,而DL LA GA摩尔投料比较低 (5 0 5 0 )的共聚物的lGG值则变化不大 ,lLL值有所下降 ,说明聚合反应还受共聚单体的投料比和其它因素影响 .升高聚合温度比在较低温度下延长反应时间更有效改变共聚物的链结构 .在一定温度下聚合 ,共聚产物的Tg 随GA摩尔投料比增大而有规律降低和在氯仿中的溶解性下降 ;而DL LA GA摩尔投料比一定时 ,聚合温度对共聚物的Tg 的影响较为复杂 ,这与聚合温度对共聚物的链结构影响较大有关 .     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Statistical copolymers of methyl methacrylate and 2‐methacryloyloxyethyl ferrocenecarboxylate: Monomer reactivity ratios,thermal and electrochemical properties

Statistical copolymers of methyl methacrylate (MMA) with 2‐methacryloyloxyethyl ferrocenecarboxylate (MAEFC) were prepared by free radical polymerization. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The glass‐transition temperature (T_g) values of the copolymers were measured and examined by means of several theoretical equations, allowing the prediction of these T_g values. The thermal degradation behavior of the copolymers was also studied and compared with the respective homopolymers. Cyclic voltammetry was employed to study the electrochemical properties of the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anti-microbial activity of anhydride copolymers and their derivatives prepared by ionizing radiation

Methyl methacrylate/maleic anhydride (MMA/MAn) copolymers were synthesized using gamma rays. Preparation conditions such as irradiation dose, comonomer composition and type of diluent affecting the degree of comonomer conversion were investigated. The suitable diluent for obtaining reasonable MMA/MAn copolymer yield was acetone. The higher copolymer yield was achieved when the amount of methyl methacrylate in comonomer feed solutions as well as irradiation dose increased. The effect of ZnCl₂ on the MMA/MAn copolymer yield and structure was studied. Characterization of the prepared MMA/MAn copolymers was performed using FTIR, and thermogravimetric and viscometric analysis. The derivatives of MMA/MAn copolymers were obtained by treating them with different reagents such as sulpha-drugs, hydroxylamine hydrochloride and 4-amino sodium salyciliate. The antimicrobial activity of MMA/MAn copolymers and their derivatives was examined. The activity of such copolymers against Staphylococcus aureus and Escherichia coli increased by increasing MAn content in the copolymer. The MMA/MAn copolymers treated with sulpha-drugs exhibited particularly high biological activity against different microorganisms. These results revealed that the prepared MMA/MAn copolymer and its derivatives have a broad antimicrobial activity.     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XIV. Radical copolymerization of vinylidene fluoride with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate

The radical copolymerization in solution of vinylidene fluoride (VDF; or 1,1‐difluoroethylene) with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate (MDP) initiated by di‐tert‐butyl peroxide is presented. Six copolymerization reactions were investigated with initial [VDF]₀/[MDP]₀ molar ratios of 35/65 to 80/20. Both of these comonomers copolymerized in this range of copolymerization. Moreover, these comonomers homopolymerized separately under these conditions. The copolymer compositions of these random copolymers were calculated by means of ¹⁹F NMR spectroscopy, which allowed the quantification of the respective amounts of each monomeric unit in the copolymers. The Tidwell–Mortimer method was used for the assessment of the reactivity ratios (r_i) of both comonomers, which showed a higher incorporation of MDP in the copolymers (r_MDP = 2.41 ± 2.28 and r_VDF = 0.38 ± 0.21 at 120 °C). The Alfrey–Price Q and e values of the trifluoroallyl monomer MDP were calculated to be 0.024 (from Q_VDF = 0.008) or 0.046 (from Q_VDF = 0.015) and 0.70 (vs e_VDF = 0.40) or 0.80 (vs e_VDF = 0.50), respectively, indicating that MDP was an electron‐accepting monomer. The thermal properties of these fluorinated copolymers were also determined. Except for those containing a high amount of VDF, the copolymers were amorphous. Each showed one glass‐transition temperature (T_g) only, and with known laws of T_g's, T_g of the MDP homopolymer was assessed. It was compared to that obtained from the direct radical homopolymerization of MDP and discussed. Indeed, these two values were close (T_g = ?3 °C). Thermogravimetric analyses were performed, and they showed that the copolymers were rather thermostable because the thermal degradation occurred at 280 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3109–3121, 2003     

Novel acrylic macromonomer with amphiphilic character derived from Triton X‐100: Radical copolymerization with methyl methacrylate and thermal properties

This article explores the synthesis of a novel methacrylic macromonomer with an amphiphilic character derived from poly(ethylene glycol) tert‐octylphenyl ether (MT) and its respective homopolymer. To know their reactivity in radical copolymerization reactions with methyl methacrylate (MMA), a model monomer (MTm) was synthesized to determine the reactivity ratios and compare them with the low molar fractions of copolymers of MT with MMA because they were difficult to isolate. They were r_MTm = 0.97 and r_MMA = 0.95. The compositional diagrams when representing the weight fraction of MT and MTm in the feed and the copolymer suggested that a clear correlation exists between the experimental points of the model monomer MTm and the macromonomer MT ones, suggesting that the length of the side poly(ethylene oxide) chain does not affect the reactivity of the methacrylic double bond in the prepared monomers for this type of polymerization reaction. The reactivity ratios of the copolymers have a tendency for the formation of random or Bernoullian copolymers. The glass‐transition temperatures (T_g's) of the prepared copolymers were determined by differential scanning calorimetry, deviated from the Fox equation, and discussed on the basis of treatments that consider the influence of the monomeric units along the copolymer chains, determining the T_g of the corresponding alternating dyads. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1641–1649, 2003     

Synthesis of poly[arylene ether sulfone-b-vinylidene fluoride] block copolymers

A series of α,ω-dihydroxy polyarylene sulfones (PAES) were synthesized comprising bisphenol A (PAES1, M_n=1800, 4900, and 9500 daltons), 4,4^′-biphenol (PAES2, M_n=4100 daltons), and hexafluorobisphenol A (PAES3, M_n=3300 daltons). These were reacted with α,ω-dibromo poly(vinylidene fluoride) (PVDF, M_n=1200 daltons) prepared by telomerization, to yield block copolymers possessing rigid and flexible segments. Block copolymers were characterized by FTIR, NMR, GPC, DSC, TGA and TEM. In several cases the block copolymers exhibited distinct thermal transitions, i.e. T_m and T_g for PVDF and PAES segments, respectively. Where observable, T_g of PAES domains in the block copolymers occurred at a temperature lower than the corresponding PAES homopolymer due to the flexible nature of the surrounding PVDF domains. Block copolymers exhibited a similar thermal stability to the corresponding PAES homopolymers but higher stability than the PVDF homopolymer, and much higher still than α,ω-dibromo PVDF. TEM analyses indicate that phase separation of PAES and PVDF domains occurs on the nanometer scale.     

Emulsion copolymerization of tribromophenyl maleimide with styrene

Emulsion copolymerization of Tribromophenyl Maleimide (TBPMI) and styrene was conducted by semi-batch and batch processes. The effects of monomer composition and copolymerization method on copolymerization rate, molecular weight and molecular weight distribution, latex particle size and size distribution, glass transition temperature (T_g), thermal stability and mechanical properties were investigated. A kinetic study has shown that the rate of copolymerization in the batch process increased with increasing TBPMI content in the monomer feed. For the semi-batch polymerized samples, molecular weight decreased and molecular weight distribution increased with increasing TBPMI content in the monomer feed. For the batch polymerized samples, molecular weight also decreased but no obvious tendency was observed for the molecular weight distribution when TBPMI content increased. Compared with the batch copolymers, the semi-batch copolymers have a higher molecular weight at the same initial monomer mixture composition. Latex particle size decreased, while particle size distribution slightly increased with increasing TBPMI content in both semi-batch and batch latices. The semi-batch samples exhibit only a single T_g, the value of which increses linearly with increasing TBPMI content. For the batch copolymers, two T_gs were found, reflecting a mixture of styrene-rich and TBPMI-rich copolymer chains. TGA results indicate that the thermal stability of the semi-batch copolymers increased with increasing TBPMI concentration. Young's and flexural moduli increased, while tensile and flexural strengths decreased by increasing the TBPMI content for both the semi-batch and batch specimens. The semi-batch specimens have higher tensile and flexural strenghts than the batch ones.     

Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

烷基硫醇诱发苯乙烯马来酸酐共聚合的研究

<正> 硫醇由其上S—H弱键易遭受自由基进攻而用作调聚剂是熟知的。硫醇作为氧化-还原体系的一个组成促进丁苯乳液聚合也有报道,但单独硫醇,在相当于引发剂的用量范围内及常温条件下,诱发烯类单体或CTC(电荷转移络合物)型单体对的共聚报道极少。我们发现了微量硫醇在常温下对苯乙烯(St)、马来酸酐(MAn)共聚的催化效应,并