LIQUID CRYSTALLINE POLYMERS. IV. THERMOTROPIC LIQUID CRYSTALLINE POLY(ARYLIDENE-ETHER)S AND COPOLYMERS CONTAINING N-METHYLPIPERIDONE LINKED TO THE MAIN CHAIN THROUGH SPACERS OF VARIOUS LENGTHS

Two novel series of poly(arylidene-ether)s and copoly(arylidene-ether)s were synthesized from N-methylpiperidone and/or cyclohexanone respectively. The first series (homopolymers) was derived from 4,4′-diformyl-α,ω-diphenoxyalkane or 4,4′-diformyl-2,2′ dimethoxy-α,ω-diphenoxyalkane with N-methylpiperidone. The second series (copolymers) was derived from the diphenoxyalkanes (I–VIII) with N-methylpiperidone and cyclohexanone. The inherent viscosities of the polymers thus prepared were in the range of 0.37–0.98 dI/g. The majority of the polymers and copolymers are soluble in chlorinated hydrocarbons. DSC measurements and microscope observation under polarized light demonstrate that this type of poly(arylidene-ether)s form nematic mesophase over a wide temperature range in contrast to the corresponding copoly(arylidene-ether)s. All of the polymers and copolymers exhibited thermotropic liquid crystalline properties. In most cases, the mesophase extends up to 315°C, where thermal decomposition prevents further observation. The morphology of polymer IXb and copolymer XIb as a selected example was examined by scanning electronic microscope.     

热致性液晶聚酯酰亚胺高分子的合成

本文以己二胺，癸二胺和对－亚苯基－双苯偏三酸酯二酐为单体通过溶液聚合反应制备了聚酯酰亚胺系列共聚物．采用ＩＲ，ＷＡＸＤ，ＤＳＣ和偏光显微镜研究了共聚物的结构和液晶性能，结果表明，聚合物具有热致液晶性，且随二胺单体摩尔组成的变化，共聚物的熔点Ｔｍｌ和玻璃化转变温度Ｔ８呈规律性变化．     

一类含萘环结构的聚酯酰亚胺液晶聚合物的结构与性能研究

利用Higashi芳香聚酯直接缩聚法的原理,采用分步投料的方法,以N,N′-1,6-亚己基-双苯偏三酸酰亚胺二酸(IA6)、6-羟基-乙-萘甲酸(HNA)和4,4′-二羟基二苯酮(DHBP)为单体原料,合成了一系列聚酯酰亚胺共聚物.用核磁共振(NMR)、差热分析(DSC)、偏光显微镜(PLM)、广角X射线衍射(WAXD)、热重分析(TGA)等手段对所合成的聚酯酰亚胺的液晶行为、结构以及热性能进行了表征.研究结果表明,当HNA投料量占单体总投料量高于33mol%时,所得聚合物均呈明显的向列型热致液晶特性.但是,此类液晶聚合物仅在升温过程中出现液晶的相转变,而在降温过程中并未观察到液晶的相转变行为.由DSC结果分析可知,此类聚合物具有较高的玻璃化转变温度(Tg)和较低的熔融温度(Tm),有望成为一类既具有较低加工温度又有较高使用温度的液晶聚合物材料.     

含液晶基团的聚对亚苯基亚乙炔基类交替共聚物的合成、表征及性能研究

合成了两种含氰基联苯液晶基团的新型聚对亚苯基亚乙炔基(PPE)类交替共聚物,并对其进行了结构表征和性能研究.示差扫描量热仪(DSC)和偏光显微镜(POM)的结果证明了在液晶单元含量较大时聚合物才会出现明显的液晶形态.荧光光谱表明,在降温前后液晶聚合物的发光光谱发生了明显的变化.同时,对聚合物进行能量转移研究发现随着溶液浓度的增加,Frster能量转移更加完全;另外,利用原子力显微镜(AFM)对聚合物降温前后的形态变化进行了观察.结果表明,液晶性质可以导致聚合物形态的变化进而带来发光光谱的改变,为今后制备液晶可控型发光聚合物提供了理论依据.     

NUCLEATION ACTION OF THERMOTROPIC LIQUID CRYSTAL POLYMERS IN THE BLENDS WITH PET

The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12.5 : 12.5 ). The investigation has been made by measurements of the cold-crystallization and melt-crystallization temperatures by DSC and of the changes of density and depolarizing light intensity during the isothermal process. In addition, the morphology of selectively etched surface of compressing pellets proved the presence of crystalline fibrillar structure, it can be supposed to have grown up from the micelle nucleus based on bundle of rigid TLCP chains.     

双邻位甲基取代的聚芳醚酮合成与表征

两种单体 2 ,2′ ,6 ,6′ 四甲基 4 ,4′ 二苯氧基二苯酮 (o M2 DPOBP)和 2 ,2′ ,6 ,6′ 四甲基 4 ,4′ 二苯氧基三苯二酮 (o M2 DPOTPDK) ,分别与对苯二甲酰氯 (TPC)和间苯二甲酰氯 (IPC)低温亲电溶液缩聚 ,合成了 4种含双邻位甲基侧基聚醚酮醚酮酮 (DM PEKEKK和DM PEKEKMK)及含双邻位甲基侧基聚醚酮酮醚酮酮 (DM PEKKEKK和DM PEKKEKMK)聚合物 .用FT IR、1 H NMR、DSC、TGA、WAXD等方法对聚合物进行了表征 ,研究了聚合物的溶解性能 .结果表明 ,该 4种聚合物具有较高的玻璃化转变温度 ,良好的热稳定性和优良的溶解性能 .     

含二氮杂萘酮结构聚醚酮酮的合成及表征

以１,４ 二（４ 氯代苯甲酰基）苯与４ （４ 羟基苯基） ２,３ 二氮杂萘 １ 酮单体经亲核取代反应,合成了含二氮杂萘酮结构聚醚酮酮聚合物．用ＦＴ ＩＲ、１Ｈ ＮＭＲ、ＤＳＣ、ＴＧＡ、Ｘ 射线衍射等方法对聚合物进行了表征,研究了聚合物的溶解性能．结果表明,该聚合物是一种具有高热稳定性的可溶性无规聚合物．     

一种新型聚酯醚砜热致液晶高分子的合成与表征

由对苯二甲酸、４，４＇－双（４－羟基苯氧基）二苯枫和对羟基苯甲酸合成了具有液晶特性的一种新型聚酯醚砜．从反应介质预聚合和后聚合等因素讨论了提高聚合物粘度的途径，以ＤＳＣ、偏光显微镜和Ｘ－线衍射仪等方法表征了其液晶特性．     

含聚乙二醇柔性间隔段的主链型液晶聚酯的合成

分子结构与液晶行为间的关系是液晶性高分子物理问题研究的核心,通常的液晶性高分子中除液晶性基元外还引入一些相对来说很柔顺的链段,称作柔性间隔段．这是因为人们认识到高分子的液晶行为不只决定于液晶性基元的结构,也受到这些基元间以及基元和间隔段间相互作用的影...     

聚丙交酯/聚乙二醇多嵌段共聚物的合成及其性能

聚丙交酯 (ＰＬＬＡ)由于具有良好的生物降解性和生物相容性 ,在医学领域已经得到了广泛的临床应用 ,近来又被制备成细胞支架大量应用于组织工程中[1,2 ] ,但由于其疏水性而造成细胞亲和性不好 .聚乙二醇 (ＰＥＧ)具有良好的亲水性 ,良好的生物相容性 ,但是ＰＥＧ是非降解性的 ,只有低分子量的ＰＥＧ可以被吞噬细胞所吞噬或透过肾滤膜而排出体外 ,因此 ,低分子量的ＰＥＧ常被用来与丙交酯 (Ｌ ＬＡ)共聚以改善ＰＬＬＡ支架的亲水性 .聚丙交酯 聚乙二醇共聚物 (ＰＬＥ)的三嵌段及两嵌段共聚物的合成及其性能的研究已被广泛报道[3～ 5] .研究…     

热致液晶聚合物的可纺性与其在基体树脂中的成纤

热致液晶聚合物的可纺性与其在基体树脂中的成纤何嘉松，张洪志（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词热致液晶聚合物，熔融可纺性，高分子共混物，原位复合，亚微米增强用热致液晶聚合物（ＴＬＣＰ）对热塑性树脂产生亚微米级增强作用的...     

POLY(p-DIOXANONE) AND ITS COPOLYMERS

ABSTRACT

This paper reviews the synthesis, properties, and applications of biodegradable polymer, poly(p-dioxanone) (PPDO), and its copolymers. Recent progress in ring-opening polymerization of p-dioxanone employing several effective catalysts is described. Properties of PPDO are given. The copolymers based on PPDO are also discussed.     

SYNTHESIS AND PROPERITIES OF SHISH-KEBAB-TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENE）S

Abstract The novel shish-kebab-type liquid crystalline poly（p-phenylene）s were synthesized through Suzuki coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer 1） and 1,4-benzenediboronic acid bistrimethylene cyclic ester （monomer 2）. Their structure and properties were characterized by GPC, DSC, X-ray diffraction and polarizing optical microscope （POM）. It was found that the polymers turned to liquid crystalline phase above their melting point. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The mesophase was identified by X-ray diffraction method. The polymers could dissolve in common organic solvents and show strong blue fluorescence. The maximum absorption bands of polymers prepared from annealed films have large red-shift due to the spontaneous orientation of the liquid crystalline side chains. The same phenomena were also observed in the fluorescence spectra.     

MELT BLENDS OF POLY (BUTYLEN TEREPHTHALATE) AND A THERMOTROPIC LIQUID CRYSTALLINE POLYMER

With the help of differential scanning calorimetry, cone-plate and capillary rheometry andscanning electron microscopy, a research has been conducted on rheological behavior,crystallization and morphology of poly (butylene terephthalate) (PBT) blends containing athermotropic LCP. The blend has zero entrance pressure loss, although the LCP has rather largeone. The viscosity curve of the blend lies between those of the LCP and PBT. The crystallizationof PBT is not affected by the presence of the LCP together with no indication oftransesterification between the two ingredients. LCP spheres and ellipsoids with the size of 0. 5--1. 5 μm disperse in PBT matrix uniformly, which is related to the viscosity ratio of the twocomponents.     

STUDIES ON THERMOTROPIC LIQUID CRYSTALLINE COPOLYESTERS:POLY (ARYLENE TEREPHTHALATECO-HEXAMETHYLENE TEREFHTHALATE)

A series of copolyesters based on terephthaloyl chloride, hexamethylene glycol and hydroquinone or chlorohydroquinone were prepared. The copolymers showed composition-dependent liquid crystalline properties as verified by visual observation of stir-opalescence, polarizing microscope and DSC. The copolyesters with aromatic diol contents over a certain extent (x≥0.2) were thermotropic with wide liquid crystalline temperature ranges. Comparing with the copolyesters based on butylene glycol or ethylene glycol, the minimum fraction of aromatic diol (x value) used to get the liquid crystallinity for all these copolyesters is around 0.2 regardless of the chain lengths of aliphatic glycols. ~1H-NMP studies revealed that copolyesters have microstructure of block sequence distribution and the mesogenie segments shorter than triad with three phenyl nuclei will not provide the liquid crystallinity.     

主链含多羰基结构单元聚芳醚酮的合成与性能

在无水三氯化铝(AlCl3)和N,N-二甲基乙酰胺(DMAc)存在下,以1,2-二氯乙烷(DCE)为溶剂,1,3-二(4-氯甲酰基苯甲酰基)苯(DMBC)分别与4,4′-二苯氧基二苯砜(DPODPS)、1,3-二(4-苯氧基苯甲酰基)苯(i-DPOPKK)、1,4-二(4-苯氧基苯甲酰基)苯(p-DPOPKK)进行低温溶液共缩聚反应,合成了3种主链含多羰基结构单元的聚芳醚酮聚合物.用FT-IR1、H-NMR、DSC、TGA、WAXD等技术对聚合物进行结构和性能表征.结果表明:增加聚合物主链中羰基的含量可提高其耐热等级;同时,由于聚合物中羰基比例的增大,其聚集态晶体结构也产生相应的变化,较易产生多晶型.     

SYNTHESIS AND PROPERTIES OF POLY(AROMATIC DIACETYLENE)S CONTAINING FLUORENE

Novel fluorene-based poly(aromatic diacetylene)s have been synthesized by CuCl-catalyzed oxidative coupling of aromatic diynes.New aromatic diynes 2,7-diethynyl-9,9-bis(triphenylamine)fluorene(M_1)is synthesized by multistep reactions.The structures and properties of the polymers are characterized and evaluated by IR,NMR,TGA,UV, photoluminescence(PL),and cyclic voltammetry analyses.These polymers possess good thermal stability.All the polymers are completely soluble in coammon solvents such as toluene,TH...     

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENEVINYLENE）

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.     

含1,3,4-噁二唑甲壳型液晶聚合物的合成与表征

甲壳型液晶聚合物（mesogen-jacketed liquid crystal polymer,MJLCP）是1987年由周其凤教授[1]首先提出的概念.从化学结构看,甲壳型液晶聚合物属于侧链型,由烯类单体经链式聚合制得,容易得到高分子量的产物,具有一般柔性侧链型液晶聚合物的一些优点.但是与柔性侧链型液晶聚合物不同的是,MJLCP分子中的刚性液晶基元是通过腰部或重心位置与主链相联结的,在主链与刚性液晶基元的侧基之间只有很短或者没有柔性间隔基.由于在这类液晶聚合物的分子主链周围空间内刚性液晶基元的密度很高,分子主链被由液晶基元形成的外壳所包裹并被迫采取相对伸直的刚性链构象.因此,这类液晶聚合物又和主链型刚性链液晶聚合物相似,具有较明显的链刚性.近年来,周其凤课题组围绕甲壳型液晶聚合物深入开展了分子设计与合成、分子结构与性能等多方面的研究.其中,设计合成具有特定功能的甲壳型液晶聚合物是在以往研究工作和学科交叉融合的基础上发展起来的一项新的研究工作.将一些有特殊功能的基团引入到甲壳型液晶聚合物中会使其具有崭新的特性.     

SYNTHESIS OF POLY(METHYLENE TEREPHTHALATE) AND COPOLYMERS WITH POLY(ETHYLENE TEREPHTHALATE)

Poly(methylene terephthalate) (PMT) and poly(ethylene terephthalate) (PET) were synthesized by triethylamine-mediated reactions of terephthalic acid and dihalomethanes or 1,2-dihaloethanes, respectively. Reactions with chloro compounds required longer reaction times and higher temper-atures than those with bromo. Copolymers were synthesized by using proportionate amounts of dihalomethane/1,2-dihaloethane mixtures. Copolymer compositions were determined by inte-grations of relative areas of methylene and ethylene ¹H NMR peaks. Mn values were determined from ¹H NMR end group signals. Mole fraction feed is linearly related to CH₂/CH₂CH₂ incorporation into copolymer products. Mechanisms are proposed to explain results.