Volumetric Properties of Aqueous Solutions of L-Glutamic Acid and Magnesium-L-Glutamate

Densities of aqueous solutions of L-glutamic acid and magnesium-L-glutamate were determined from T=288.15 to 333.15 K at 5 K temperature intervals. The measured densities were used to evaluate the apparent molar volumes, V _2,φ (m,T), the cubic expansion coefficients, α(m,T), and the changes of isobaric heat capacities with respect to pressure, (∂ C _p /∂ p) _T,m . They were qualitatively correlated with changes in the structure of water that occur when L-glutamic acid or magnesium-L-glutamate are present.     

Molecularly imprinted adsorbents for preconcentration and isolation of progesterone and testosterone by solid phase extraction combined with HPLC

The use of a novel procedure of solid-phase extraction with molecularly imprinted polymers (MISPE) has been described. A MISPE procedure relying on tailor-made, artificial-mimic materials capable of selectively rebinding target analytes (steroids) based on a combination of recognition mechanisms, such as size, shape and functionality, was custom designed for progesterone and testosterone. The combination of MISPE with LC/DAD is a simple and an efficient method for the determination and quality control of progesterone and testosterone in human urine samples.     

Intramolecular Charge Transfer Reaction in Solutions of Low to High Electrolyte Concentrations: Interplay between Friction and Solvation

Fluorescence emission spectroscopy have been used to investigate the effects of electrolytes on the excited state intramolecular charge transfer (ICT) reaction in 4-(1-azetidinyl)benzonitrile (P4C) in very dilute to concentrated electrolyte solutions of ethyl acetate (EA), acetonitrile (AN) and ethanol (EtOH). In the limit of very low electrolyte concentrations, the reaction rate (=1/τ _rxn, τ _rxn being the reaction time) is found to decrease with increasing electrolyte concentration, the extent of decrease being the maximum in EA and the minimum in AN. At moderate to higher electrolyte concentrations, however, the rate increases upon further addition of electrolyte. The observed non-monotonic electrolyte concentration dependence of rate is believed to occur due to a novel interplay between friction and solvation experienced by the photo-excited reactant in solution. Moreover, the long time decay constant and amplitude of the bi-exponential decay of the time resolved fluorescence emission intensity also show a significant electrolyte concentration dependence which corroborates the relevant steady-state results. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Influence of Europium speciation on its accumulation in Brassica napus and over-expressing BnTR1 lines

This study aimed at influence of europium speciation on its accumulation in Brassica napus (CK) and over-expressing BnTR1 lines (OE), and the kinetics of Eu uptake were investigated. These results indicated that the uptake in the roots of OE was higher than that of CK at high concentrations of europium and even the enrichment in the roots of OE was as high as 20,000 mg/kg at 328.9 μΜ Eu, this suggested that OE might have better resistance to uranium than CK. The time kinetics in plants showed that there had the similar trend between CK and OE. The formation of Eu³⁺at pH 5 in deionized water was beneficial to plants enrichment Eu and carbonate could reduce the adsorption of Eu in two group and phosphate almost completely impress the adsorption of Eu in two group, but citric acid could enhance europium root-to-shoot translocation in two group. These results would help understanding the mechanism of Eu uptake in Brassica napus (CK) and over-expressing BnTR1 lines (OE), therefore properly developing efficient europium/americium phytoremediation.     

Hydrothermal Synthesis and Structure of A Novel Organic–Inorganic Hybrid Polyoxotungstate: H5[Cu(en)2H2O]{Cu(en)2[P2W19O69(H2O)]} · 2.5H2en · 8H2O

Abstract  A novel polyoxotungstate H₅[Cu(en)₂H₂O]{Cu(en)₂[P₂W₁₉O₆₉(H₂O)]} · 2.5H₂en · 8H₂O (1) has been synthesized under hydrothermal conditions and characterized by IR spectroscopy, elemental analysis, and single crystal X-ray structural analysis. Crystal data for 1: Triclinic, P-1, a = 12.673(6) ?, b = 20.147(10) ?, c = 20.514(11) ?, α = 110.432(7)°, β = 90.171(5)°, γ = 97.502(6)°, V = 4859(4) ?³, Z = 2. Compound 1 exhibits a 1D linear structure, in which the [Cu(en)₂]²⁺ ions act as the linkages of {P ₂ W ₁₉ } lacunary units. Graphical Abstract  A novel polyoxotungstate H₅[Cu(en)₂H₂O]{Cu(en)₂[P₂W₁₉O₆₉(H₂O)]} · 2.5H₂en · 8H₂O has been made under hydrothermal conditions. Compound 1 exhibits a 1D linear structure based on the {P ₂ W ₁₉ } lacunary units linked by the [Cu(en)₂]²⁺ bridging groups.      

One-Pot Reduction of Sulfoxides with NaBH4, CoCl2 · 6H2O Catalyst,and Moist Alumina

Sulfoxides are reduced by a combination of sodium borohydride, a catalytic amount of cobalt(II) chloride hexahydrate, and chromatographic neutral alumina preloaded with a small amount of water (moist alumina) in hexane to produce the corresponding sulfides in good to excellent yields under mild conditions. An interesting structural influence of sulfoxides on their reactivity is observed.

RuCl3 · xH2O: A New Efficient Catalyst for Facile Preparation of 1,1‐Diacetates from Aldehydes

An efficient, facile preparation of aldehyde 1,1‐diacetates (acylals) in excellent yields catalyzed by RuCl₃ · xH₂O is described. Ketones do not react under these conditions.     

Facile and Efficient Michael Addition of Indole to Nitroolefins Catalyzed by Zn(OAc)2 · 2H2O

The Zn(OAc)₂2H₂O-catalyed Michael addition reaction of indole to electron-deficient nitroolefins to afford the corresponding adducts in good to excellent yields with high selectivity is reported.     

Gas adsorption process in activated carbon over a wide temperature range above the critical point. Part 1: modified Dubinin-Astakhov model

Simulations of the thermal effects during adsorption cycles are valuable tools for the design of efficient adsorption-based systems such as gas storage, gas separation and adsorption-based heat pumps. An analytical representation of the measured adsorption data over the wide operating pressure and temperature swing of the system is necessary for the calculation of complete mass and energy conservation equations. In Part 1, the Dubinin-Astakhov (D-A) model is adapted to model hydrogen, nitrogen, and methane adsorption isotherms on activated carbon at high pressures and supercritical temperatures assuming a constant microporous adsorption volume. The five parameter D-A type adsorption model is shown to fit the experimental data for hydrogen (30 to 293 K, up to 6 MPa), nitrogen (93 to 298 K, up to 6 MPa), and for methane (243 to 333 K, up to 9 MPa). The quality of the fit of the multiple experimental adsorption isotherms is excellent over the large temperature and pressure ranges involved. The model’s parameters could be determined as well from only the 77 K and 298 K hydrogen isotherms without much reducing the quality of the fit.     

Chemoselective Reduction and Transesterification of α-Keto Propargylic Esters Mediated by NaBH4 and CeCl3 · 7H2O

An efficient one-pot synthesis of α -hydroxy propargylic esters by chemoselective reduction followed by transesterification using NaBH₄ in combination with CeCl₃ · 7H₂O is described.

Volumetric Properties of Some Aliphatic Mono- and Dicarboxylic Acids in Water at 298.15 K

The apparent molar volumes, V _φ , of two series of homologous aliphatic carboxylic acids, H(CH₂) _n COOH [n=0–5] and (CH₂) _n (COOH)₂ [n=0–5], were determined in dilute aqueous solutions by density measurements at T=298.15 K. Densities were measured using a vibrating-tube densimeter (DMA 5000, Anton Paar, Austria) at T=298.15 K. These results were used to calculate the apparent molar volumes of each solute over the concentration range 0.0050≤m/(mol⋅kg⁻¹)≤0.3000. Values of the apparent molar volumes of undissociated acids V_f(u)⁰V_{\phi (u)}^{0} were also calculated. The variation of V_f(u)⁰V_{\phi (u)}^{0} was determined as a function of the aliphatic chain length of the studied carboxylic acids.     

Volumetric Study of Aqueous Solutions of Polyethylene Glycol as a Function of the Polymer Molar Mass in the Temperature Range 283.15 to 313.15 K and 0.1 MPa

Density measurements were made for binary aqueous solutions of polyethylene glycol at seven temperatures: 283.15, 288.15, 293.15, 298.15, 303.15, 308.15, and 313.15 K. Polyethylene glycol samples with nominal average molar masses of 3000 g⋅mol⁻¹ (PEG 3000), 6000 g⋅mol⁻¹ (PEG 6000), 10000 g⋅mol⁻¹ (PEG 10000) and 20000 g⋅mol⁻¹ (PEG 20000) were used. These results were used to determine the specific volumes of solutions with solute-to-solvent mass ratios (mass of the solute/mass of the solvent) in the range 0.0546 to 1.4932 for PEG 3000, from 0.0553 to 1.4986 for PEG 6000, from 0.0552 to 1.2241 for PEG 10000, and from 0.0530 to 1.2264 for PEG 20000. The differences between the specific volume of a solution and the specific volume of the pure solvent, at a given temperature, were represented by a virial-type equation in terms of solute concentration. The first-order coefficient of the expansion is the partial specific volume of the solute at infinite dilution. The higher-order coefficients are related to the contribution of pairs, triplets, and higher-order solute aggregates, according to the Constant-Pressure Solution Theory. The functional dependence of the virial coefficients upon temperature is discussed in terms of solute-solute and solute-solvent interactions. The effect of the PEG molar mass on the partial specific volume of solute at infinite dilution, as well as the contributions of pairs of solute molecules to the solution volume, are also investigated. The apparent specific volume, apparent specific expansibility, apparent specific expansibility at infinite dilution and virial coefficients of the apparent specific expansibility are also presented.     

NaBrO3/NaHSO4 · H2O as a Versatile Reagent System for the Oxidation of Benzylic Alcohols and Aldehydes

The oxidation of benzylic alcohols and aldehydes by NaBrO₃ is efficiently promoted in the presence of NaHSO₄ · H₂O. All reactions were performed under mild and completely heterogeneous conditions in good to high yields.     

Glycerin and CeCl3 · 7H2O: A New and Efficient Recyclable Reaction Medium for the Synthesis of Quinoxalines

An efficient and environmentally benign process for the synthesis of quinoxalines has been developed using glycerine–cerium chloride as a reaction medium. This method is applicable to a variety of diketones and 1,2-phenylenediamines to afford the corresponding quinoxaline derivatives in excellent yields. The reaction medium was recovered and reused for further reactions without any problem.     

Thermal and quality evaluation of vegetable oils used in ruminant feed

Dairies add fat supplements to the diets of small ruminants to increase energy production and consequently the production and quality nutritional and sensorial of the milk. This study investigated the thermal and oxidative stability of babassu, castor, faveleira, and sesame oils by TG/DTA and PDSC. The profile of the fatty oils studied was determined by GC–MS as well as physicochemical characteristics. The thermogravimetric profile of the oils indicated that mass loss was caused by the decomposition or volatility of the triacylglycerides. Faveleira and sesame oils showed a high percentage of polyunsaturated fatty acids, especially C18:2. From a nutritional standpoint, unsaturated oils are more suitable supplements for animals because they promote biochemical changes beneficial to human health.     

Temperature Dependence of Physical Properties of Imidazolium Based Ionic Liquids: Internal Pressure and Molar Refraction

Density, speed of sound and refractive index of the imidazolium-based ionic liquids (ILs), 1-methyl-3-octylimidazolium chloride [C₈mim][Cl], 1-butyl-3-methylimidazolium methyl sulfate [C₄mim][C₁OSO₃], and 1-butyl-3-methylimidazolium octyl sulfate [C₄mim][C₈OSO₃], have been measured in the temperature range from 283.15 to 343.15 K. Experimental density and speed of sound have been used to calculate the internal pressure p _i of the ILs. The p _i values were found to be higher than those of water and molecular organic liquids, but lower than those of classical molten salts. We also calculated molar refraction R _M from the measured refractive index n _D in the temperature range from 288.15 to 343.15 K. Refractive indices of ILs were also higher than those of normal organic liquids, but comparable to long-chain hydrocarbon organic solvents. The structure-property correlation of the ILs has been discussed and the results have been compared to our earlier studies (Kumar in J. Solution Chem. 37:203–214, 2008).     

Studies of Partial Molar Volumes of Alkylamines in Non-electrolyte Solvents. IV. Alkyl Amines in Cyclic Ethers at 303.15 K

Apparent molar volumes V _φ,B of n-propylamine, n-butylamine, di-n-propylamine, di-n-butylamine, triethylamine, tri-n-propylamine, and tri-n-butylamine in 1,4-dioxane and in oxolane (tetrahydrofuran) have been determined at 303.15 K using a high-precision Anton Paar vibrating-tube densimeter (model DMA 60/602). The limiting partial molar volumes and limiting excess partial molar volumes are analyzed and interpreted in terms of solute-solvent interactions and structural effects of the molecules. Analyses were made of the contributions of specific interactions to the partial molar volumes of these primary, secondary and tertiary amines in 1,4-dioxane and oxolane using the Terasawa model, scaled particle theory (SPT) and hard-sphere theory (HST). The ERAS model has also been applied to estimate the apparent molar volumes and excess apparent molar volumes of alkylamine solutions in 1,4-dioxane and oxolane.     

High-voltage aqueous symmetric electrochemical capacitor based on Ru0.7Sn0.3O2·nH2O electrodes in 1 M KOH

A mild hydrothermal process is applied to synthesize hydrous ruthenium–tin binary oxides (Ru_0.7Sn_0.3O₂·nH₂O) with good capacitive performance in alkaline system. Then, a symmetric electrochemical capacitor (EC) is fabricated based on the as-synthesized Ru_0.7Sn_0.3O₂·nH₂O material and 1 M KOH aqueous electrolyte. Electrochemical performance of the symmetric EC is investigated by cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy tests. Electrochemical tests demonstrate that the symmetric EC surprisingly can operate with a high upper cell voltage limit of 1.45 V in 1 M KOH electrolyte. Maximum specific capacitance and energy density of the symmetric aqueous EC are approximately 160 F/g and 21 Wh/kg, respectively, delivered at a current density of 1.25 A/g. And the specific energy density decreases to approximately 15 Wh/kg when the specific power density increases up to approximately 1,770 W/kg. The promising specific energy and power densities are obtained simultaneously for the unwonted symmetric EC due to its larger operating potential range. Moreover, the symmetric EC exhibits electrochemical stability with 85.2% of the initial capacitance over consecutive 1,000 cycle numbers.     

Experimental and the Theoretical Studies of the Dielectric Properties of DMSO–H<Subscript>2</Subscript>O Mixtures

This paper focuses on the measurement of the permittivity of dimethyl sulfoxide (DMSO)–water (H₂O) mixture solutions, at 2.45 GHz by using a resonant cavity perturbation method. A specific phenomenon was found, in that the imaginary part of the permittivity for the mixture solution was larger than the imaginary part for each component. Theoretical calculation indicated that the reason for that phenomenon was that the high frequency friction of the mixture was larger than that of each component. When comparing the theoretical results with the experimental data, it was found that the classical Debye equation must be modified in order to calculate the complex permittivity.     

Conductance of Dilute Hydrochloric Acid Solutions to 458 K and 1.4 MPa

Electrical conductance measurements were made on dilute solutions of hydrochloric acid to 458 K and 1.4 MPa with a flow instrument. These measurements agree well with those of previous authors. The conductance theory of Fuoss and Hsia as given by Fernandez-Prini (FHFP), was fit to these measurements. It was found that this theory adequately described the present results with a single parameter, the limiting conductance at infinite dilution Λ°(HCl). Within their estimated accuracy, reported literature results of Λ°(HCl) between 264.15 and 579 K and high pressures were found to be represented by a five-parameter equation that was a function of the solvent viscosity, temperature and pressure. This equation along with the FHFP theory permits accurate calculation of the conductance of dilute hydrochloric acid solutions at high temperatures and pressures. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.