聚丙烯酸/聚氧化乙烯高分子复合溶液的结构与粘度

通过溶液折光指数和粘度测定,研究了聚丙烯酸（ＰＡＡ）与聚氧化乙烯（ＰＥＯ）高分子链间在复合溶液中的相互作用和ＰＡＡ／ＰＥＯ高分子氢键复合溶液的结构与粘度,研究了复合溶液粘度随溶液ｐＨ值的变化规律及不同浓度时剪切速率对复合溶液粘度和复合增粘效果的影响。结果表明：ＰＡＡ／ＰＥＯ复合溶液结构不同于ＰＡＡ和ＰＥＯ两组分聚合物溶液结构,ＰＡＡ与ＰＥＯ高分子链间的氢键相互作用形成构象更为伸展、流体力学体积列大     

Studies on interpolymer self-organisation behaviour of protoporphyrin IX bound poly(carboxylic acid)s with complimentary polymers by means of fluorescence techniques

Covalently bound protoporphyrin IX was used as a fluorophore to investigate the interpolymer complex formation between the poly(carboxylic acid)s, PMAA/PAA and poly(N-vinyl pyrrolidone), PVP, poly(ethylene oxide), PEO or poly(ethylene glycol), PEG. Absorption and emission spectral properties of protoporphyrin IX bound to PAA, PMAA and PVP have been studied. Protoporphyrin IX in poly(MAA-co-PPIX) was found to be present in the dimer or higher aggregated form at low pH due to the environmental restriction imposed by the polymer whereas in the case of poly(AA-co-PPIX) and poly(VP-co-PPIX), PPIX exists in monomeric form. The fluorescence intensity and lifetime of PPIX bound to poly(carboxylic acid)s increase on complexation through hydrogen bonding with PVP, PEO and PEG due to the displacement of water molecules in the vicinity of the PPIX. Poly(MAA-co-PPIX) shows longer fluorescence lifetime due to the more compact interpolymer complexation as compared to poly(AA-co-PPIX) due to the enhanced hydrophobicity of PMAA. Poly(VP-co-PPIX) shows a decrease in the fluorescence lifetime on complexation with PMAA or PAA due to the hydrophilic and microgel like environment of the fluorophore bound to PVP. The contrasting behaviour of the same polymer adduct with respect to the site of the fluorophore is interpreted to be due to the solvent structure which determines the environment of the fluorophore.     

Complexation between poly(acrylic acid) and poly(vinylpyrrolidone): Influence of the molecular weight of poly(acrylic acid) and small molecule salt on the complexation

Poly(acrylic acid) (PAA) with different molecular weight and poly(vinylpyrrolidone) (PVP) were prepared by free radical polymerization using 2,2′-azoisobutyronitrile (AIBN) as initiator in anhydrous methanol for PAA, and in distilled water for PVP. Then, the complexation between PAA and PVP in aqueous solution was studied by UV transmittance measurement and fluorescence probe technique. The result shows that (1) at low pH, the formation of complexation between PAA and PVP bases on the intermacromolecular hydrogen bond and the composition of the formed complex is around 3:2 (the unit molar ratio of PAA to PVP) at pH 2.60 over the range of pH investigated. (2) The cooperative interaction through the formation of hydrogen bond among active sites plays an important role in complex formation, and depends on the pH of solution, the required minimum chain length of poly(acrylic acid). (3) The hydrogen bond is not affected by small molecular salt, which only affects those carboxylic groups without forming hydrogen bond on the PAA chain.     

Interface hydrogen-bonded core-shell nanofibers by coaxial electrospinning

Core-shell nanofibers were prepared by coaxial electrospinning technology,with poly(ethylene oxide) (PEO) as the core while poly(acrylic acid) (PAA) as the shell.PEO and PAA can form polymer complexes based on hydrogen bonding.In order to avoid forming strong hydrogen bonding complexes at nozzle and blocking spinning process,a polar aprotic solvent,N,N-dimethylformamide (DMF),was selected to dissolve PEO and PAA respectively.SEM,TEM and DSC were utilized to characterize the morphology and structure of PEO-PAA core-shell nanofibers.FTIR spectra demonstrated that hydrogen bonding was formed at the core-shell interface.In addition,the PAA shell of the nanofibers can be cross-linked by ethylene glycol (EG) under heat treatment,which increases the stability and extends the potential applications in aqueous environment.     

Interpolymer complex between poly(ethylene oxide) and poly(carboxylic acid)

An interpolymer complex was prepared by mixing aqueous solutions of poly(ethylene oxide) (PEO) and of a poly(carboxylic acid), i.e., poly(acrylic acid)(PAA), poly(methacrylic acid)(PMAA), or styrene-maleic acid copolymer(PSMA). The complexation mechanism was discussed on the basis of results of such experimental methods as viscosity, potentiometric titration, and turbidimetry. The hydrogen bond is primarily involved in these complexations, but the influence of hydrophobic interaction on complexation can not be ignored. If the degree of dissociation α of carboxylic acid or the degree of polymerization P_n of PEO was perceptibly changed, a stable complex was obtained at about α 0.1 or P_n (PEO) = 40 for PMAA, 200 for PAA. This fact indicates that more than a definite number of binding sites are necessary for a stable interpolymer complex to be formed and that cooperative interaction among active sites plays an important role in complex formation.     

Complexation of poly(acrylic acid) and poly(ethylene oxide) investigated by enhanced Rayleigh scattering method

The method of enhanced Rayleigh scattering spectroscopy (ERS) was developed to investigate the complexation of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in semidilute polymer solutions. Based on the Ornstein‐Zernike equation, the relationship between macromolecular static correlation length and ERS intensity was presented. Moreover, the ERS spectra were calculated by the moving window two‐dimensional (MW2D) correlation spectroscopy to get detailed information of the polymer complexation. The results indicated that the ERS spectroscopy characteristics of the polymer mixtures have similar trend, and the ERS intensity promptly increases as the macromolecular chains contract. The increase of ERS intensity showed that the degree of complexation between PAA and PEO increases when the pH value decreases. The complexation results from the collapse of macromolecular chains, which is induced by the PAA chains contracting and the enhanced association between PAA and PEO chains because of the hydrogen bond formation. In addition, the association resulting from the complexation of PAA and PEO in solution was demonstrated by the MW2D correlation spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1847–1852, 2010     

A Simple and Effective Approach to Vesicles and Large Compound Vesicles via Complexation of Amphiphilic Block Copolymer With Polyelectrolyte in Water

This work reports for the first time a simple and effective approach to trigger a spheres‐to‐ vesicles morphological transition from amphiphilic block copolymer/polyelectrolyte complexes in aqueous solution. Vesicles and large compound vesicles (LCVs) were prepared via complexation of polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) with poly(acrylic acid) (PAA) in water and directly visualized using cryo‐TEM. The complexation and morphological transitions were driven by the hydrogen bonding between the complementary binding sites on the PAA and PEO blocks of the block copolymer. The findings in this work suggest that complexation between amphiphilic block copolymer and polyelectrolyte is a viable approach to vesicles and LCVs in aqueous media.     

Characterization of poly(carboxylic acid)/poly(ethylene oxide) blends formed through hydrogen bonding by spectroscopic and calorimetric analyses

The solid state of the complex between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO), and that between poly(methacrylic acid) (PMAA) and PEO formed via hydrogen-bonding was studied by differential-scanning calorimetric (DSC) and by Fourier-transform infrared (FT–IR) spectroscopic measurements. Melting temperature T_m and the degree of the crystallinity X_c of PEO in the systems PAA (or PMAA)/PEO blends obtained from aqueous or dimethyl sulfoxide (DMSO) medium were measured in various unit mol % of PEO ([PEO]100/{[PAA(or PMAA)] + [PEO]}) where [ ] is the unit mole concentration. It was found that 50 unit mol % of PEO is a critical composition, which gives new evidence for the 1 : 1 complex formation between PAA (or PMAA) and PEO. From the FT–IR spectroscopic analysis in conjunction with DSC measurements we also found that the effects of solvent and of hydrophobic interaction (due to the α-methyl group of PMAA) are the important factors controlling the complexation in the solution and solid systems. These factors also affect the crystallization behavior and the microstructure of the PAA (or PMAA)/PEO blend in solid state.     

Peculiarities of Formation of Intermolecular Polycomplexes Based on Polyacrylamide,Poly(vinyl alcohol) and Poly(ethylene oxide)

The phenomenon of self-assembly of aggregates formed by relatively short chains of poly(vinyl alcohol) (PVA) on the long macromolecules of polyacrylamide (PAA) in aqueous medium are discussed. PVA and PAA form intermolecular polycomplexes (InterPC) of a constant composition independently on a ratio of polymer components. The complex formation between high-molecular-weight PAA and relatively low-molecular-weight poly(ethylene oxide) (PEO) are considered also. PEO with M ⩽ 4·10⁴ g.mol⁻¹ weakly interacts with PAA. The polymer-polymer interaction can be intensified when the part of amide groups (∼20 mol %) on PAA chain to transform into the carboxylic groups. InterPCs formed by PEO and initial or modified PAA have associative structure with friable packing of the polymer segments. They are stabilized by the hydrogen bond system.     

由特殊相互作用导致的高分子间的络合

采用结合物理老化技术的示差扫描量热法（ＤＳＣ）以及非辐射能量转移荧光光谱法（ＮＲＥＴ）研究了聚（聚乙烯－ｃｏ－４－乙烯基苯酚与聚甲基丙烯酸乙酯（ＰＥＭＡ）共混体系的相容与络合行为。对ＳＴＶＰｈ／ＰＥＭＡ共混体系,当ＳＴＶＰｈ中的ＯＨ基团含量仅为１ｍｏｌ％时,即可实现相容。随ＯＨ基含量继续增加,共混体系的Ｔｇ值上升并逐渐接近和高于Ｆｏｘ方程计算值,玻璃化转变区域逐渐变窄,ＮＲＥＴ能量转移效率远高于普     

聚环氧乙烷(PEO)与聚醋酸乙烯酯(PVA)的共混研究

动态力学谱研究表明熔融共混PVA/PEO体系的无定形态中存在着纯PEO及PVA/PEO的相容或部分相容相。相容或部分相容相的T_g随共混物组成的变化远高于按照FOX方程的计算值。用结晶和分子间相互作用解释了这种对FOX方程的偏离。应用FTIR差示光谱技术对PVA/PEO共混物和PVA/DGDE浓溶液的研究证实了PVA分子链上酯基和PEO分子链存在着强的相互作用。     

Spin label study of phase morphology and polymer segmental motion in poly(acrylic acid)–poly(ethylene oxide) complex

The ESR lineshapes of nitroxide radical end‐labeled on poly(ethylene oxide) (SLPEO) for the pure polymer and for different weight ratio complexes with poly(acrylic acid) (PAA) were studied as a function of temperature. For SLPEO one spectral component was detected in the entire temperature range, indicating that the spin label was in the homogeneous phase domain. For all PAA–PEO complexes two spectral components with different rates of motion, a ‘fast’ and a ‘slow’ component, were observed, which indicates the existence of microheterogeneity at the molecular level: the more mobile the PEO‐rich microphase, the more rigid is the PAA‐rich microphase. On the other hand, the SLPEO polymer segmental motion was restricted owing to the hydrogen bond interaction between the carboxyl proton in PAA and the ether oxygen in PEO. This restriction was exacerbated with increasing the PAA content in the complex, which could be further substantiated through the calculated S and τ_c values. Copyright © 2003 John Wiley & Sons, Ltd.     

SPHERULITIC STRUCTURE AND MORPHOLOGY OF POLY(ETHYLENE SUCCINATE)/POLY(ETHYLENE OXIDE) (PES/PEO) BLENDS WITH ONE-STEP CRYSTALLIZATION

The spherulitic structure and morphology development of poly(ethylene succinate)/poly(ethylene oxide) (PES/PEO) blends with one-step crystallization behavior were observed by means of polarizing optical microscope.It was found that the pure PES spherulite in which the adequate quantity of PEO melt existed in the interlamellar regions,and the blending spherulite formed by both PES and PEO lamellae could form simultaneously.When the two types of spherulites contacted with each other the front of the blendi...     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

固体NMR研究PAA/PEO共混物中氢键相互作用与结构演化

分子间相互作用是决定材料结构和性能的关键因素之一,而如何在分子水上实现对复杂相互作用分子的检测仍然是一个挑战性课题。本工作首先在不同p H值条下以聚丙烯酸/聚环氧乙烷(PAA/PEO)的混合水溶液制备了系列的固体薄膜,然后采用多种基于连续相调制多脉冲技术的一维和二维~1H多脉冲去耦(CRAMPS)固体NMR新技术,并结合高分辨~(13)C交叉极化魔角旋转(CPMAS)、~(23)Na多量子(MQ)等多核固体NMR实验,对PAA/PEO聚合物共混物的微观结构和动力学进行了原位和系统的研究。通过不同类型的~1H高分辨CRAMPS实验检测到共混物中包含多种不同类型质子:通过氢键相互作用形成二聚体的COOH基团、自由COOH基团、与水结合的COOH基团和主链基团。随着p H值的升高,除主链质子外,大部分其它区域的信号都明显降低,这是由于PAA与PEO以及水的氢键作用减弱所致。这些CRAMPS NMR技术也被用来阐明不同p H值制备的样品中不同基团的分子运动性。此外,二维~1H-~1H自旋交换NMR实验提供了关于聚合物PAA与PEO大分子链间、以及水与聚合物的相互作用。~1H自旋扩散实验表明,在这些共混物中明显存在相微观相分离的结构,并且测定的分散相区尺寸约为17 nm。~(23)Na MQMAS实验揭示了在共混物中存在两种类型~(23)Na位,一种是自由的钠离子,另一种是与大分子相互作用的Na离子。特别是通过~1H-检测的~(23)Na-~1H CPMAS实验揭示了Na~+离子的位置远离PEO而与PAA临近。上述这些SSNMR实验结果在分子水平上提供了氢键相互作用对PAA/PEO共混物微观结构和动力学影响的详细信息,可以获得不同p H值对PAA与PEO的氢键作用、相容性、微观结构、水-聚合物相互作用和不同组分分子运动性的影响。在上述核磁共振研究的基础上,我们提出了一种新的PAA/PEO共混物的结构模型,该模型首次成功地揭示了不同的p H值对PAA/PEO共混物中微观结构和动力学的影响。本工作清楚地表明,固态核磁共振是在分子水平上研究具有复杂相互作用的多相聚合物材料的有力工具。本文的研究工作对于探索检测聚合物弱相互作用的新方法和发展基于氢键相互作用的聚合物新材料的开发具有重要意义。     

Highly ion conductive poly(ethylene oxide)-based solid polymer electrolytes from hydrogen bonding layer-by-layer assembly

We report the development of a solid polymer electrolyte film from hydrogen bonding layer-by-layer (LBL) assembly that outperforms previously reported LBL assembled films and approaches battery integration capability. Films were fabricated by alternating deposition of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) layers from aqueous solutions. Film quality benefits from increasing PEO molecular weight even into the 10(6) range due to the intrinsically low PEO/PAA cross-link density. Assembly is disrupted at pH near the PAA ionization onset, and a potential mechanism for modulating PEO:PAA ratio within assembled films by manipulating pH is discussed. Ionic conductivity of 5 x 10(-5) S/cm is achievable after short exposure to 100% relative humidity (RH) for plasticization. Adding free ions by exposing PEO/ PAA films to lithium salt solutions enhanced conductivity to greater than 10(-5) S/cm at only 52% RH and tentatively greater than 10(-4) S/cm at 100% RH. The excellent stability of PEO/PAA films even when exposed to 1.0 M salt solutions led to an exploration of LBL assembly with added electrolyte present in the adsorption step. Fortuitously, the modulation of PEO/PAA assembly by ionic strength is analogous to that of electrostatic LBL assembly and can be attributed to electrolyte interactions with PEO and PAA. Dry ionic conductivity was enhanced in films assembled in the presence of salt as compared to films that were merely exposed to salt after assembly, implying different morphologies. These results reveal clear directions for the evolution of these promising solid polymer electrolytes into elements appropriate for electrochemical power storage and generation applications.     

PH effects in the complex formation and blending of poly(acrylic acid) with poly(ethylene oxide)

The effect of pH on the complex formation between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) has been studied in aqueous solutions by turbidimetric and fluorescent methods. It was shown that the formation of insoluble interpolymer complexes is observed below a certain critical pH of complexation (pH(crit1)). The formation of hydrophilic interpolymer associates is possible above pH(crit1) and below a certain pH(crit2). The effects of polymer concentrations in solution and PEO molecular weight as well as inorganic salt addition on these critical pH values were studied. The polymeric films based on blends of PAA and PEO were prepared by casting from aqueous solutions with different pHs. These films were characterized by light transmittance measurements and differential scanning calorimetry. The existence of the pH value above which the polymers form an immiscible blend was demonstrated. The transitions between the interpolymer complex, miscible blend, and immiscible blend caused by pH changes are discussed. The recommendations for preparation of homogeneous miscible films based on compositions of poly(carboxylic acids) and various nonionic water-soluble polymers are presented.     

Interpolymer complex formation between helical poly(L-proline) and random-coil poly(methacrylic acid) through hydrogen bonding

Interpolymer complex formation between poly(L -proline) (PLP) with helical structure and poly(methacrylic acid) (PMAA) with random-coil structure through hydrogen bonding in aqueous medium has been studied by several experimental techniques, e.g., viscometry, turbidimetry, potentiometry, conductometry, scanning electron microscopy, and x-ray diffraction methods. The decreases in reduced viscosity of the solution on addition of an increasing quantity of PLP to a constant amount of PMAA reveals the formation of a complex between PLP and PMAA. The minimum in reduced viscosity at a unit-mole ratio [PLP]/[PMAA] = 1.0 suggests a 1 : 1 complex formation. A distinct change in the curves for turbidity, pH, and conductance versus [PLP]/[PMAA] supports this conclusion. A scanning electron micrograph for the 1 : 1 PLP–PMAA complexes shows that the PLP/PMAA complex has the shape of entangled long fibers. An x-ray diffraction pattern for the PLP/PMAA complexes gives no diffraction patterns which appear in pure PLP, indicating the destruction of the helical structure of PLP due to the interpolymer complexation. Mixtures of PMAA with poly(γ-hydroxy-L -proline) (PHLP) which has a similar conformation as PLP, but involves intra- or intermolecular hydrogen bonds, has also been investigated by vicometry measurements. The reduced viscosity of a solution of the mixed polymers increases with increasing [PHLP], indicating no complex formation. All the results reveal that the magnitude and the nature of the forces acting in the polymers play an important role in interpolymer complexation.     

Deliberately designed processes to physically tether the carboxyl groups of poly(pentacosadiynoic acid) to a poly(vinyl alcohol) glassy matrix to make poly(pentacosadiynoic acid) thermochromically reversible in the matrix

In this article, we demonstrate that by tethering carboxyl groups of poly(10,12-pentacosadiynoic acid) (PDA) to a poly(vinyl alcohol) (PVA) matrix, PDA, which is irreversible in its pure form, becomes reversible in the thermochromism. The tethering is realized by simple but deliberately designed processes: (1) Disperse the commercially available monomer 10,12-pentacosadiynoic acid (DA) nanocrystals in a PVA aqueous solution by the "NCCM" method invented in our laboratory. (2) Anneal and dry the mixture solution at a temperature higher than the melting point of pure DA crystal. (3) Polymerize the as-annealed DA/PVA blend films by UV irradiation. After the polymerization, PDA/PVA films with completely reversible thermochromism are obtained. The reversible PDA/PVA films can be easily dissolved in water, leading to water-dispersible nanoaggregates with the reversibility. Blends of PDA with other water-soluble polymers such as poly(ethylene oxide) (PEO), poly(acrylic acid) (PAA) and poly(allyamine) (PAM), were prepared respectively, by the same processes and under the same conditions. It is found that all these nanocomposites are irreversible or partially reversible in the thermochromism; either the relatively low glassy transition temperature of the polymer matrix (in the case of PEO) or the partial ionization nature of the polymer (in the cases of PAA and PAM) is responsible for the irreversibility or the partial reversibility.     

STRUCTURE AND PROPERTIES OF P(MMA-MAA)/PEO INTERMACROMOLECULAR COMPLEX FORMED THROUGH HYDROGEN BONDING

The superstructure and properties of polymers might be improved and enhanced througl intermolecular complexation. In this paper, the preparation, structure and properties of P(MMA-MAA)/PEO intermolecular complex through hydrogen bonding are studied. By acid hydrolysis of PMMA, a series of P(MMA-MAA) copolymers have been prepared, the MAA content of which depends on the temperature and time of hydrolyzation. In case the MAA content in P(MMA-MAA) is beyond 0.4 mole fraction, the hydrogen bonding between P(MMA-MAA) and PEO is strong enough to form intermolecular complex. The supermolecular structure of the complex is quite different from that of its constituent, which was observed by an X-ray diffraction and transmission electron microscope. The crystallization of PEO is confined owing to complexation. The complex exhibits quite a lot of good properties in thermal stability, gas permeability as well as mechanical strength, and could be used in many fields.