Determination of germanium in different media by atomic absorption spectrometry with electrothermal atomization

Effectsof acids, alkalis or salts on the atomic absorption spectrometry (electrothermal atomization) of germanium are described. Most of the species tested interfere with the absorption. The mechanisms of the interferences were investigated by using tantalum-coated and standard graphite tubes. The results showed that positive interferences are due to inhibition of the reaction of germanium dioxide with carbon to form volatile GeO₃ and that suppressive interferences are due to physical occlusion effects. The addition of sodium hydroxide to the sample solution provides a very sensitive analysis (0.004 ppm for 1% absorption) for germanium without matrix interferences. This is probably due to the formation of stable Na₂GeO₃ during the ashing step in the presence of sodium hydroxide.     

Targeted synthesis ultrafine α- and γ-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> having different morphologies

Reactions of nitric acid solutions of bismuth with alkalis have been studied. The effect caused by coprecipitation conditions in the presence of additional agents (EG, PEG 400, or PEG 8000) and without on the phase composition and morphology of α- and γ-Bi₂O₃ has been determined.     

Analysis of microbial extracellular polysaccharides in biofilms by HPLC. Part I: development of the analytical method using two complementary stationary phases

The investigation of microbial extracellular polymeric substances (EPS) is helpful for the implementation of analytical methods which are suitable for biofilm analysis in order to understand the architecture and function of biofilms. A procedure for the qualitative and quantitative determination of various monosaccharides, oligosaccharides and uronic acids as important components of the carbohydrate fraction of microbial EPS by high-performance liquid chromatography (HPLC) and refractive index (RI)/UV detection is presented. Porous graphitic carbon and lead-form cation-exchanger have been examined as stationary phases. Therefore, two complementary HPLC methods are presented. To simulate the conditions of hydrolysis, the influences of various salts, acids and alkalis as matrix components have been investigated. Furthermore, the dependencies on the pH value and temperature of the mobile phase have been thoroughly studied. The results showed that the lead-form cation-exchanger is suitable for the separation of the neutral monosaccharides. However, for direct analysis after acidic hydrolysis with H₂SO₄, HCl or trifluoroacetic acid, an additional purification step, e.g., precipitation or lyophilization, is necessary when the cation-exchanger is used. With the exception of hydrolysis with HCl, the porous graphitic carbon stationary phase can be used without any further purification step and is appropriate for the separation of uronic acids and their γ-lactones. Additionally, the separation of a single monosaccharide and its derivatives is possible. Analytical parameters including the sensitivities, repeatabilities, limits of detection and limits of quantification of both HPLC methods using the RI detector are presented. The optimized method has been applied for the characterization of alginates and is also suitable for other extracellular polysaccharides in biofilms. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorised users.     

Fluorinated 1-Methylaminoalkylphosphonates. Interaction with Ammonia and Methylamine

Previously we reported that fluorinated aminophosphonates 1a react with NH₃ to form heterocyclic salts 2 [1,2]. As was found, 2 eliminate NH₃ under heating to give neutral 1,4,2-diazaphospholines 3. The reverse reaction of 3 with NH₃, any amines, and alkalis led to the same aniones 2. Salts 2 and diazaphospholines 3 are hydrolyzing by moisture of ammonia or solvents into betaines 4.     

XPS and SIMS investigations on plasma-treated glass surfaces

Commercially available float-glass samples were exposed to ion bombardment in an HF-plasma. This should form an SiO₂-rich layer close to the surface of the samples. From XPS-investigations it was found that treatment times between 2 and 4 min in Ar plasma lead to a pronounced depletion of alkalis. Further FAB-SIMS depth profiles gave additional information about the extension of the layers with altered stoichiometry.     

Reaction of graphite fluoride with NaOH-KOH eutectic

Graphite fluoride has been generally considered chemically inert against strong alkalis under ambient conditions. In the present study we demonstrate that treatment of graphite fluoride with eutectic NaOH-KOH mixture at 250 °C induces dramatic structural and textural changes in the solid as evidenced by XRD, FT-IR, Raman, UV-vis absorption and fluorescence and microscopy techniques (TEM, AFM). The reaction proceeds in the molten state leading to water-soluble, graphitized carbon particles which unlike graphite fluoride, adopt a variety of morphologies, like platy, tetragonal, triangular, discoid and spherical. The resulting carbon particles are dispersible in water and fluoresce under UV excitation.     

微波辅助的聚氯乙烯-三乙撑四胺负载钯配合物对Suzuki反应的催化性能

探讨了在微波作用下, 聚氯乙烯-三乙撑四胺负载钯配合物(PVC-TETA-Pd)对四苯硼钠与卤代苯的Suzuki反应的催化性能. 实验发现: 在微波功率为200 W时, 在Na₂CO₃, NaF, KF, NaHCO₃等多种碱的存在下, 以DMF的水溶液(V∶V＝5∶3)为溶剂, 在无惰性气体保护下, PVC-TETA-Pd催化四苯硼钠与碘代苯在20 min内即可定量反应, 与常规加热方式相比, 节省了大量时间; 同时也证明了四苯硼钠的四个苯基均可参与Suzuki偶联反应; 该催化剂回收再利用3次后, 仍具有较高的催化活性.     

Extraction chromatographic separation of thorium (IV) with tri-n-octylphosphine oxide (TOPO)

Thorium was extracted from a mixture of nitric acid and NaNO₃ of 0.01M each at pH 2.2 on a column of silica gel coated with TOPO. Thorium was separated from alkalis, alkaline earths, chromium, iron, cobalt, nickel, zinc, cadmium, mercury, lead, trivalent rare earths, platinum group metals, chloride, phosphate and acetate in binary mixtures by selective extraction of thorium. Thorium was separated from cerium (IV), zirconium, uranium and molybdenum by selective elution of thorium with 0.01M H₂SO₄. The method was extended for the analysis of thorium in monozite ore.     

Cation-exchange studies of yttrium(III) and its separation from various other elements

Summary Systematic studies are presented on the cation-exchange behaviour of yttrium on Dowex 50W-X8. HCl, HNO₃, H₂SO₄, NH₄Cl, NH₄NO₃, (NH₄)₂SO₄, CH₃COONH₄, NaCl, NaNO₃, malonic acid, tartaric acid and EDTA were used as eluting agents. Y was separated from a large variety of elements by selective elution or selective adsorption. Thus it was possible to separate it from many common ions such as alkalis, alkaline earths, Bi, Hg, V, Cd, U, In, Co, Ga, Zn, Sc, Fe, Al, Ni, and Ce by selective elution. It was separated from Ti, Zr, Hf, and Sb by selective sorption in citrate media and from Cr, Tl, Pb, and Th by gradient elution.     

Transport Properties of Monatomic Insulating Liquids and Liquid Alkali Metals from a Cage Model

A cage model is used to calculate the shear viscosity m s and the thermal conductivity s for insulating monatomic liquids and for liquid alkali metals. Three empirical laws: (i) $ \eta_s \, \propto \, (1/\sqrt T ) $ for liquid alkalis; (ii) s / m s ～ constant for Rb and Cs respectively; (iii) $ ({\gamma / {\eta _s }})\sim \sqrt {{{k_B T_m } / M}} $ for liquid alkalis at the melting temperature T m , where n is the surface tension and M the ionic mass, are naturally explained.     

Thermodynamics and kinetics of hydrogen absorption–desorption of vanadium synthesized by aluminothermy

This paper studies the addition (0–40% w/w) of natural zeolite (NZ, 84% clinoptilolite) in blended cements made with Portland cement (PC) with low and medium C₃A content. The isothermal calorimetry was used to understand the effect of NZ on the early cement hydration. For low C₃A cement, the addition of NZ produces mainly a dilution effect and then the heat released curve is similar to plain cement with lower intensity. For medium C₃A cement, the curve shows the C₃S peak in advance and a high intensity of third peak attributed to C₃A hydration. The high cation fixed of NZ reduces the ions concentration (especially alkalis) in the mixing water stimulating the PC hydration. The flowability decreases when the NZ replacement level increases. Results of Fratini’s test show that NZ with both PCs used presents slow pozzolanic activity. At early age, XRD and FTIR analyses confirm that hydration products are the same as that of the corresponding PC and the CH is progressively reduced after 28 days and some AFm phases (hemi- and monocarboaluminate) appear depending on the NZ percentage and the PC used. For low replacement levels, the compressive strength is higher than the corresponding PC from 2 to 28 days. For high replacement levels, the early compressive strength is lower than that of corresponding plain PC and the pozzolanic reaction improves the later compressive strength of blended cements.     

Synthesis and properties of substituted 2-imidazolidinones

4-Hydroxy- and 4-hydroxylamino-1-hydroxy-3-aryl-5,5-dimethyl-2-imidazolidinones, respectively, were obtained by treatment of N-arylcarbamoyl derivatives of N-(1-oximino-2-methyl-2-porpyl)hydroxylamine with acids and alkalis. 4-Hydroxylaminoimidazolidinones react with p-nitrobenzaldehyde to give nitrones and are converted in acidic media to 4-hydroxy derivatives, which by the action of methanol in the presence of p-toluenesulfonic acid give 4-methoxy-2-imidazolidinones. Acylation and alkylation of 4-hydroxy- and 4-methoxy-2-imidazolidinones take place at the hydroxy group attached to N(₁).Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1255–1261, September, 1976.     

Critical Properties of n-Alkanes and the Relevance of Polymer Models to the Heavy Fluid Metals Rb and Cs

Abstract

n-alkane critical constants as determined experimentally for n ≤ 18 are first compared and contrasted with the predictions of various models. Qualitative accord is found, but only one quantitative prediction, that of Wertheim's model for the critical temperature T_c, is found to fit the experimental data over the admittedly limited range of n available.

Reference is then made to critical properties of the heavy fluid alkali metals, and especially Rb and Cs, where some evidence is cited for the existence of long chains of alkali atoms. The relative constancy of the product of the critical pressure P_c and the critical volume V_c for the three heaviest alkalis is noted, a fact consistent with one of the more recent ‘polymer’ models.     

铈基介孔金属有机骨架固定化酶的构建及催化性能

金属有机骨架(MOF)材料由于其孔隙率高、比表面积大以及具有发达的内联通孔道结构等优点,可以作为优良的生物分子固定化载体。通过表面活性自组装策略制备了铈基介孔MOF(Ce-MOF-F),表征结果表明,该材料有大的比表面积和呈辐射状的介孔孔道结构。以其为载体、南极假丝酵母脂肪酶B(CALB)为模型酶,通过物理吸附法制备了生物催化剂CALB@Ce-MOF-F,对该固定化酶的酶载量和催化性能进行了研究。在优化条件下,CALB的负载量为162.0mg/g载体,水解活性为899.1U/g蛋白。与游离CALB相比,CALB@Ce-MOF-F表现出对高温、酸碱和有机溶剂等有更强的耐受性;将Ce-MOF-F用于多种酶的固定化,研究其作为载体的普适性,结果表明,介孔Ce-MOF-F对洋葱伯克氏菌脂肪酶(BCL)和漆酶有良好的固定效果,可以作为良好载体,并能对酶起到较好的保护作用。     

Organic reactions in strong alkalis-III Fission of keto- and hydroxy-acids

Studies with suitable fatty acid derivatives have clarified many of the reactions of alcohols and ketones in concentrated alkalis.

Secondary alcohols are dehydrogenated to ketones which then yield acids by hydrolysis of the C—C bonds adjacent to the carbonyl group. Various side reactions are reported and discussed.

A mechanism is proposed for the fission of ricinoleic acid in concentrated alkalis.     

Enthalpies of dilution of l-cystine in aqueous solutions of sodium hydroxide, potassium hydroxide and hydrochloric acid

The enthalpies of dilution of l-cystine in solutions of two strong alkalis and one strong acid have been determined by isothermal flow-mix calorimetry at the temperatures 298.15 K, 303.15 K, 308.15 K, 313.15 K and 318.15 K. Equations of apparent enthalpies of dilution have been obtained from the experimental data in terms of the improved McMillan-Mayer theory. Enthalpic interaction coefficients, h₂, h₃, and h₄, are obtained and the values of pair-wise enthalpic interaction coefficient, h₂, discussed in the light of solute-solute and solute-solvent interactions.     

碳黑预处理对Pt/C催化剂对甲醇氧化电催化活性的影响

直接甲醇燃料电池(DMFC)由于具有较多的优点而受到广泛的关注. 但是碳载Pt (Pt/C)阳极催化剂电催化活性低是限制其应用的一个主要问题. 为了提高Pt/C催化剂对甲醇氧化的电催化性能, 分别用CO₂, 空气, H₂O₂或HNO₃对常用作为载体的Vulcan XC-72碳黑进行预处理. 结果表明, 在用CO₂, 空气, HNO₃, H₂O₂处理的及未处理的碳黑作载体制得的Pt/C催化剂电极上, 甲醇氧化峰的峰电流密度顺序为39, 33, 32, 20和18 mA•cm^－2, 表明用CO₂处理的碳载体制备的Pt/C催化剂对甲醇氧化有最好的电催化活性和稳定性. 其主要原因是用CO₂处理能减少碳黑表面的含氧基团和增加石墨化程度, 而使碳黑的电阻降低及Pt粒子在碳黑上的分散性变好.     

Simple fabrication of a phosphorus-doped hierarchical porous carbon via soft-template method for efficient CO2capture

Hierarchical porous carbons are widely used as adsorbents, catalyst supports, electrode materials, and other applications because of their high specific surface area (SSA), varied pore structure, adjustable porosity, and excellent physicochemical stability. Introducing heteroatoms such as N, P, or S, with electronegativities different from that of carbon, into the carbon skeleton can change the chemical properties of the surface and the density of the electron cloud around the carbon matrix, thus altering interactions of CO₂molecules with the surface and improving CO₂adsorption capacity. Therefore, doping heteroatoms in carbon materials has attracted a great amount of attention. In this paper, the template method was used with F108 (polyethylene glycol–polypropylene glycolpolyethylene glycol) as the template, resorcinol and formaldehyde solutions as the carbon sources, phosphoric acid as the phosphorus source, and KOH as the activator to prepare phosphorus-doped hierarchical porous carbons. Through a series of characterization and CO₂adsorption experiments, the influence of the amount of KOH and template agent on the pore structure of carbon materials was studied. We conclude that these phosphorus-doped hierarchical porous carbon materials are promising CO₂adsorbents.     

Production of formic and acetic acids from phenol by hydrothermal oxidation

Hydrothermal technology is a core environmental-protection technique which can be used for waste water treatment and biomass conversion. In this paper a novel idea, alkaline hydrothermal oxidation, is proposed for producing formic and acetic acids from wastewater containing phenolic compounds. The effects of the most important conditions??reaction temperature, reaction time, oxygen supply, and type of alkaline catalyst??on yields of formic and acetic acids were investigated. The results indicated that the optimum conditions for production of formic and acetic acids were: reaction temperature 300???C, reaction time 90?s, H₂O₂ equivalent to 60% oxygen, and NaOH concentration 1.5?mmol. Under the optimum conditions the yields of formic and acetic acids reached 4.8 and 23.5%, respectively. In addition, the effect of different alkalis on yields of formic and acetic acids was also investigated. The results showed that compared with use of NaOH addition of KOH had a more pronounced effect on improving the yield of acetic acid. This research indicated that high-value-added formic and acetic acids can be recovered as resources by hydrothermal oxidation of phenolic wastewater, and thus hydrothermal oxidation has high potential for converting phenolic compounds in wastewater into value-added products.     

CO2 reforming of methane over zirconia-supported nickel catalysts, II. Thermogravimetric analysis

Thermogravimetric analysis has been used to study carbon deposition during the CO₂ reforming of methane over Ni/ZrO₂ catalysts. The carbon deposits form on the reduced catalyst at a very fast rate during temperature-programmed surface reaction of reforming, and reach a steady state below 973 K. So, the amount of deposited carbon remains constant on the catalyst during the reaction at 973 K. A relationship between the amount of deposited carbon and the activity reveals that the initially formed carbon acts as a reaction intermediate and reacts with CO₂ to produce CO.