The Photokinetics of Electron Transfer Reaction of Methylene Blue with Titanium Trichloride in Aqueous–Alcoholic Solvents

The kinetics of photoinduced electron transfer reaction of methylene blue (MB) and titanium trichloride was investigated in water and different aqueous–alcoholic solvents. The reaction is pseudo‐first order, dependent only on the concentration of titanium trichloride at a fixed concentration of MB. The effect of water and aqueous–alcoholic solvents was studied in the acidic pH range (4–7). It was observed that the quantum yield (ϕ ) of the reaction increased with increase in polarity of the reaction medium. The quantum yield was high under acidic conditions and decreased with further increase in acidity. The addition of ions and increase in temperature increased the rate and quantum yield of the reaction. The absence of any reaction intermediate was confirmed by spectroscopic investigations. A mechanism for the reaction has been proposed in accordance with the kinetics of the reaction. The activation energy (E _a) was calculated by the Arrhenius relation. Thermodynamic parameters such as E _a, enthalpy change (ΔH ), free energy change (ΔG ), and entropy change (ΔS ) were also evaluated.     

Demetallation of α,β,γ,δ-tetrakis(p-sulfophenyl) porphiniron(III) in mineral acid–alcohol–water media

Demetallation rates of α,β,γ,δ-tetrakis(p-sulfophenyl)porphiniron(III) in hydrochloric acid–ethanol–water, perchloric acid–ethanol–water, and sulfuric acid–alcohol–water media were determined. For a given acidity value H₀ the order of the rates for the three acids was HCl > H₂SO₄ > HClO₄. This is also the order for complex formation between acid anion and iron(III). Consequently ligands as well as protons are involved in the breaking of bonds between the metal and the porphyrin leading to the formation of the activated complex. The log k values for HCl and HClO₄ media were not linearly related to the Hammett acidity function as they were for sulfuric acid–ethanol–water media. The average ΔH? and ΔS?values for the HCl media were 18.4 ± 1.4 kcal/mol and ? 19 ± 3 cal K mol, respectively, in very close agreement with those for H₂SO₄ media despite the difference in H ₀ dependence. For H₂SO₄–alcohol–water media the order of the rates was butanol > propanol > ethanol with little difference between isomeric alcohols.     

Reactivity Tracers of the Hydrolysis of Fe(II)‐Bis(salicylidene) Complexes: Initial–Transition States Analysis and Enhanced Impact of Tensides on the Kinetic Trends

The kinetics of the acid hydrolysis reaction of Fe(II)‐bis(salicylidene) complexes were followed under pseudo–first‐order conditions ([H⁺] >> [complex]) at 298 K. The ligands of the studied azomethine complexes were derived from the condensation of salicylaldehyde with different five α‐amino acids. The hydrolysis reactions were studied in acidic medium at different ratios (v/v) of aqua–organic mixtures. The decrease in the dielectric constant values of the reaction mixture enhances the reactivity of the reaction. The transfer chemical potentials of the initial and transition states (IS–TS) from water into mixed solvents were determined from the solubility measurements combined with the kinetic data. Nonlinear plots of logk_obs versus 1/D (the reciprocal of the dielectric constant) suggest the influence of the solvation of IS–TS on the reaction reactivity. Furthermore, the acid hydrolysis reactions were screened in the presence of different concentrations of cationic and anionic tensides. The addition of surfactants to the reaction mixture accelerates the reaction reactivity. The obtained kinetic data were used to determine the values of δ_mΔG^# (the change in the activation barrier) for the studied complexes when transferred from “water to various ratios (v/v) of water–co‐organic binary mixtures” and from “water to water containing different [surfactant].” It was found that the reactivity of the acid hydrolysis reaction was controlled by the hydrophobicity of the studied chelates.     

Solute–solvent interaction effects on second‐order rate constants of reaction between 1‐chloro‐2,4‐dinitrobenzene and aniline in alcohol–water mixtures

The second‐order rate coefficients for aromatic nucleophilic substitution reaction between 1‐chloro‐2,4‐dinitrobenzene and aniline have been measured in aqueous solutions of ethanol and methanol at 25°C. The plots of rate constants versus mole fraction of water show a maximum in all‐aqueous solutions. The effect of four empirical solvent parameters including hydrogen bond donor acidity (α) dipolarity/polarizability (π^*) normalized polarity (E^N_T) and solvophobicity (Sp) has been investigated. This investigation has been carried out by means of simple and multiple regression models. A dual‐parameter equation of log k₂ versus Sp and α was obtained in all‐aqueous solutions (n = 41, r = 0.962, s = 0.053, p = 0.0000). This equation shows that solvophobicity and hydrogen bond donor acidity are important factors in the occurrence of the reaction and they have opposite effects on reaction rate. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 90–97, 2005     

Electron transfer reactions of V(IV) with Cl(I), Br(I) and I(I). A kinetic study

A kinetic study on the oxidation of V(IV) by chloramine-T (CAT) at pH 6.85 by N-bromo succinimide (NBS) in aqueous acetic acid–perchloric acid media and by N-iodo succinimide (NIS) in aqueous perchloric acid medium has been carried out. In all the systems studied the order with respect to the oxidant is unity. NBS and CAT oxidation reactions exhibited Michaelis–Menten type kinetics, and the NIS study indicated unit dependence on [substrate]. Independence on acidity has been observed in the case of CAT and NBS reactions, but NIS reactions exhibited inverse unit dependence on [acid]. Novel solvent influences have been noticed in the case of CAT reactions, but with NIS and NBS reactions retardation in the rate has been observed with an increase in the percentage of acetic acid. Plausible mechanisms consistent with the results have been postulated, and suitable rate laws in consonance with the postulated mechanisms have been derived.     

Polymerization of N,N′-methylenebis(acrylamide) using potassium peroxydiphosphate–thiocarboxylic acid redox systems: A comparison

The kinetics of aqueous polymerization of the symmetrical nonconjugated divinyl monomer N,N′-methylenebis(acrylamide) (MBA), was studied at 35°C and at constant ionic strength under nitrogen atmosphere involving potassium peroxydiphosphate (PDP) as oxidant with three different activators thiolactic acid (TLA), thiomalic acid (TMA), and thioglycollic acid (TGA). The rate of polymerization, R_P, and rate of disappearance of peroxydiphosphate, –R_PDP have been followed while polymerization was initiated separately by the PDP–TLA/PDP–TMA/PDP–TGA redox systems. R_P for the above three systems showed first-order dependences on both [monomer] and [activator] and zero-order dependence on [PDP]. First-order dependence on [PDP] and zero-order dependences on [monomer] and [activators] were observed with respect to –R_PDP in the above three systems. A reaction mechanism which involves complex formation between PDP and thiocarboxylic acid, propagation through intramolecular–intermolecular reactions, degradative chain transfer reaction of the growing radical with PDP, and linear termination by the interaction of the chain radical with primary radical was proposed. The kinetic parameters for the three polymerization systems were calculated and compared. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 11–20, 1998     

Synthesis of water‐soluble allyl‐functionalized oligochitosan and its modification by thiol–ene addition in water

A novel, straightforward and versatile chemical pathway has been studied to functionalize water‐soluble chitosan oligomers. This metal‐free methodology is based on the epoxy‐amine reaction of the allyl glycidyl ether with chitosan, followed by thiol‐ene radical coupling reaction of ω‐functional mercaptans, using 4,4′‐Azobis(4‐cyanovaleric acid) as a free radical initiator. Both reactions were entirely carried out in water. In a preliminary step, chitosan depolymerization was carried out using H₂O₂ in an acetic medium under 100 W microwave irradiation, optimizing the yield of water‐soluble oligomers. Functionalization by six different thiols bearing alcohol, carboxylic acid, ester, and amino groups was then performed, leading to a range of functional oligochitosans with different grafting efficiencies. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 39–48     

Kinetic investigation of the bromate–ascorbic acid–malonic acid system

According to our experiments the bromide ion concentration exhibits in the bromate–ascorbic acid–malonic acid–perchloric acid system three extrema as a function of time. To describe this peculiar phenomenon, the kinetics of four component reactions have been studied separately. The following rate equations were obtained: Bromate–ascorbic acid reaction: Bromate–bromide ion reaction: Bromide–ascorbic acid reaction: Bromine–malonic acid reaction: k₄ = 6 × 10^?3 s^?1, k_-4 ≥ 1.7 × 10³ s^?1, k₅ ≥ 1 × 10⁷M^?1 · s^?1 Taking into account the stoichiometry of the component reactions and using these rate equations, the concentration versus time curves of the composite system were calculated. Although the agreement is not as good as in the case of the component reactions, it is remarkable that this kinetic structure exhibits the three extrema found.     

A kinetic study of the oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-methionine by water soluble colloidal MnO<Subscript>2</Subscript>

Aqueous solution of water soluble colloidal MnO₂ was prepared by Perez-Benito method. Kinetics of l-methionine oxidation by colloidal MnO₂ in perchloric acid (0.93 × 10⁻⁴ to 3.72 × 10⁻⁴ mol dm⁻³) has been studied spectrophotometrically. The reaction follows first-order kinetics with respect to [H⁺]. The first-order kinetics with respect to l-methionine at low concentration shifts to zero order at higher concentration. The effects of [Mn(II)] and [F⁻] on the reaction rate were also determined. Manganese (II) has sigmoidal effect on the rate reaction and act as auto catalyst. The exact dependence on [Mn(II)] cannot be explained due to its oxidation by colloidal MnO₂. Methionine sulfoxide was formed as the oxidation product of l-methionine. Ammonia and carbon dioxide have not been identified as the reaction products. The mechanism with the observed kinetics has been proposed and discussed.     

Kinetics and mechanism of the oxidation of diols by pyridinium bromochromate

The kinetics of oxidation of four vicinal diols, four nonvicinal diols, and one of their monoethers by pyridinium bromochromate (PBC) have been studied in dimethyl sulfoxide. The main product of oxidation is the corresponding hydroxyaldehyde. The reaction is first-order with respect to each the diol and PBC. The reaction is acid-catalyzed and the acid dependence has the form: k_obs=a+b[H⁺]. The oxidation of [1,1,2,2-²H₄]ethanediol exhibited a primary kinetic isotope effect (k_H/k _D=6.70 at 298 K). The reaction has been studied in 19 organic solvents including dimethyl sulfoxide and the solvent effect has been analyzed using multiparametric equations. The temperature dependence of the kinetic isotope effect indicates the presence of a symmetrical transition state in the rate-determining step. A suitable mechanism has been proposed. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 285–290, 1998.     

Lewis Acids as Activators in CBS‐Catalysed Diels–Alder Reactions: Distortion Induced Lewis Acidity Enhancement of SnCl4

The effect of several Lewis acids on the CBS catalyst (named after Corey, Bakshi and Shibata) was investigated in this study. While ²H NMR spectroscopic measurements served as gauge for the activation capability of the Lewis acids, in situ FT‐IR spectroscopy was employed to assess the catalytic activity of the Lewis acid oxazaborolidine complexes. A correlation was found between the Δδ(²H) values and rate constants k_DA, which indicates a direct translation of Lewis acidity into reactivity of the Lewis acid–CBS complexes. Unexpectedly, a significant deviation was found for SnCl₄ as Lewis acid. The SnCl₄–CBS adduct was much more reactive than the Δδ(²H) values predicted and gave similar reaction rates to those observed for the prominent AlBr₃–CBS adduct. To rationalize these results, quantum mechanical calculations were performed. The frontier molecular orbital approach was applied and a good correlation between the LUMO energies of the Lewis acid–CBS–naphthoquinone adducts and k_DA could be found. For the SnCl₄–CBS–naphthoquinone adduct an unusual distortion was observed leading to an enhanced Lewis acidity. Energy decomposition analysis with natural orbitals for chemical valence (EDA‐NOCV) calculations revealed the relevant interactions and activation mode of SnCl₄ as Lewis acid in Diels–Alder reactions.     

Kinetics and Mechanism of Cetyltrimethylammonium Bromide Catalyzed N-Bromosuccinimide Oxidation of D-Mannose in Acidic Medium

The kinetics and mechanism of N-bromosuccinimide (NBS) oxidation of D-mannose in the absence and presence of cetyltrimethylammonium bromide (CTAB) in acidic media have been studied under the condition [D-mannose]_T ? [NBS]_T at 40°C. Under the kinetic conditions, both the slower uncatalyzed and faster catalyzed paths go on. Both the paths show the fractional and first order dependence on [D-mannose] and [NBS]_T, respectively. The rate decreased with increase in acidity. Neither succinimide (NHS) nor Hg(II) influenced the reaction rate. Activation parameters of the reactions were determined by studying the reaction at different temperatures (30–50°C). The influence of salts on the reaction rate was also studied. CTAB accelerates the reactions and the observed effects have been explained by considering the hydrophobic and electrostatic interaction between the surfactants and reactants. In the reaction, approximately 1 mole of NBS oxidized one mole of D-mannose. A reaction scheme of the oxidation of D-mannose by NBS was found to be in consistent with the rate law and the reaction stoichiometry.     

THE EQUILIBRIA AND KINETICS OF THE COMPLEX FORMATION BETWEEN Fe(III) AND TARTARIC AND CITRIC ACIDS

Abstract

The equilibria and kinetics of formation of 1 : 1 iron(III) complexes with tartaric and citric acids have been studied in the pH range 1.0–2.0 in aqueous alcoholic perchlorate media. The equilibrium constants for the reactions Fe³⁺ +

H₄L^keq Complex + nH⁺ were obtained from spectrophotometric measurements in the wavelength range 360–420 nm. The values of K _eq determined at 20°, μ=1.0 M (water 100%), were 0.21 M with n=2 for tartaric and 0.0186 M² with n=3 for citric acid. The stoichiometry of the complex formation and the reaction sites of the ligands were discussed with reference to previous findings on ligands of related structures. The kinetics of the reactions were carried out by the stopped-flow technique. From the hydrogen ion dependence of the reaction rates it can be shown that complex formation occurs between FeOH²⁺ and differently protonated forms of the ligands. Forward rates for the different paths are consistent with an SN1 IP interaction in agreement with the Eigen mechanism; forward and reverse rate quotients enabled the evaluation of the equilibrium constants which agreed satisfactorily with the spectrophotometric ones. The effect of varying the solvent composition (water-alcohol) was discussed with reference to the reaction mechanism.     

Kinetics of the reaction of carbon dioxide with blends of amines in aqueous media using the stopped‐flow technique

The effect of mixing 2‐amino‐2‐methyl‐1‐propanol (AMP) with a primary amine, monoethanolamine (MEA), and a secondary amine, diethanolamine (DEA), on the kinetics of the reaction with carbon dioxide in aqueous media has been studied at 298, 303, 308, and 313 K over a range of blend composition and concentration. The direct stopped‐flow conductimetric method has been used to measure the kinetics of these reactions. The proposed model representing the reaction of CO₂ with either of the blends studied is found to be satisfactory in determining the kinetics of the involved reactions. This model is based on the zwitterion mechanism for all the amines involved (AMP, MEA, and DEA). Blending AMP with either of the amines results in observed pseudo‐first‐order reaction rate constant values (k_o) that are greater than the sum of the k_o values of the respective pure amines. This is due to the role played by one amine in the deprotonation of the zwitterion of the other amine. Steric factor and basicity of the formed zwitterion and the deprotonating species have a great bearing in determining the rate of the reactions studied. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 391–405, 2005     

Oxidation of naphthalene and phenanthrene by pyridinium fluorochromate (PFC)—a kinetic and mechanistic study

The kinetics of the oxidation of naphthalene and phenanthrene by pyridinium fluorochromate, C₅H₅NHCrO₃F, PFC, has been studied. The main product of the oxidation is the corresponding quinone. While each oxidation, studied in aqueous acetic acid (80–95%, v/v) medium, is first order with respect to the oxidant, the rate is almost independent of the substrate concentration. The reactions are catalyzed by acid, the acid-catalyzed reactions being very fast, which precluded determination of their order in acid medium. The kinetic isotope effect, k_H/k_D is 5.50 at 303 K for naphthalene. The reaction does not induce polymerization of acrylonitrile. The effects of temperature and solvent compositions were studied and activation parameters evaluated. Probable mechanisms are discussed.     

Kinetics and mechanism of interaction of dipeptide (glycyl–glycine) with ninhydrin in aqueous micellar media

The rates of reaction between ninhydrin and dipeptide glycyl–glycine (Gly–Gly) have been determined by studying the reaction spectrophotometrically at 70°C and pH 5.0 in aqueous and in aqueous cationic micelles of cetyltrimethylammonium bromide (CTAB). The reaction follows first‐ and fractional‐order kinetics, respectively, in [Gly–Gly] and [ninhydrin]. The observed rate constant is affected by [CTAB] changes and the maximum rate enhancement is ca. three‐fold. As the k_ψ ? [CTAB] profile shape is characteristic of bimolecular reactions catalyzed by micelles, the catalysis is explained in terms of the pseudo‐phase model of the micelles (proposed by Menger and Portnoy and developed by Bunton and Romsted). The presence of inorganic salts (NaCl, NaBr, Na₂SO₄) does not reveal any regular effect but the data with organic salts (NaBenz, NaSal) show an increase in the rate followed by a decrease. The kinetic data have been used to calculate the micellar binding constants K_S for Gly–Gly and K_N for ninhydrin and the respective values are 317 and 69 mol^?1 dm³. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 643–650, 2006     

Kinetics and mechanism of the oxidation of formic and oxalic acids by quinolinium fluorochromate

Kinetics and mechanism of oxidation of formic and oxalic acids by quinolinium fluorochromate (QFC) have been studied in dimethylsulphoxide. The main product of oxidation is carbon dioxide. The reaction is first-order with respect to QFC. Michaelis-Menten type of kinetics were observed with respect to the reductants. The reaction is acid-catalysed and the acid dependence has the form: k_obs =a +b[H⁺]. The oxidation of α-deuterioformic acid exhibits a substantial primary kinetic isotope effect (k_H/k_D = 6.01 at 303 K). The reaction has been studied in nineteen different organic solvents and the solvent effect has been analysed using Taft’s and Swain’s multiparametric equations. The temperature dependence of the kinetic isotope effect indicates the presence of a symmetrical cyclic transition state in the rate-determining step. Suitable mechanisms have been proposed.     

Polymerization of methyl methacrylate with butyllithium–diethylzinc complex

The low-temperature polymerization of methyl methacrylate initiated with butyllithium–diethylzinc has been studied in toluene and in toluene–tetrahydrofuran and toluene–dioxane mixtures in various proportions. The polymerization process is typically anionic; it is characterized by a very rapid initiation reaction, and the absence of termination and chain transfer reactions, the molecular weight increasing proportionally with the degree of conversion. With toluene as a solvent, the polymer chains are associated, as is shown by viscometric measurements; moreover the polymers produced are highly polydisperse (M_v/M_n = 5.4). The kinetics are very complicated and vary with the range of the catalyst and monomer concentrations. In pure toluene in the presence of the organometallic complex, butyllithium–diethylzinc, the monomer addition is more stereospecific than when butyllithium alone is used as catalyst. By adding tetrahydrofuran to the reaction mixture, the polymer chain association disappears; concomitantly the stereochemical structure of the polymer changes from an isotactic to a mainly syndiotactic configuration. In toluene–tetrahydrofuran mixtures containing from 1 to 10 vol.-% tetrahydrofuran, the kinetics of polymerization can easily be interpreted by assuming the presence of two propagating reactive species which are in equilibrium with each other: the ion pair and the THF-solvated ion pair. The energy of activation of propagation for the free ion pair is equal to 7.5 kcal./mole; for the solvated ion pair a value of 5.5 kcal./mole was found, including the solvation enthalpy of the organometal with tetrahydrofuran. The existence of any relation between the reactivity of the propagating species and the tactic incorporation of the monomeric units has been discussed. The polymerization in mixtures of toluene–dioxane is intermediate between that in pure toluene and that in toluene–HF mixtures; the reaction mechanism however cannot be interpreted with the usual kinetic scheme. The experimental data concerning the rate dependence on catalyst and monomer concentrations are briefly summarized.     

Kinetics of oxidation of some meta- and para-substituted phenyl methyl sulfoxides by chloramine-T in buffered ethanol–water

The kinetics of oxidation of methyl phenyl sulfoxide by chloramine-T (CAT) has been studied in buffered ethanol–water (1:1 v/v) of pH 7.0. The reaction was found to follow no simple-order kinetics. A possible mechanism is suggested involving three rate-controlling steps: (1) the reaction between RNHCl (R = CH₃C₆H₄SO₂) and the sulfoxide, (2) the disproportionation of RNHCl, and (3) the reaction between RNCl₂ and the sulfoxide. A mixed-order rate law is derived as rate/[C][SO] = k₁ + K_dk₂[C]/[SA]. The rate law is found to be obeyed for the meta- and para-substituted phenyl methyl sulfoxides also. The ρ value is obtained using Hammett's σ constants. The ρ values obtained for the attack of both RNHCl and RNCl₂ with the sulfoxides are almost the same, showing that both are converting the sulfoxide to the same intermediate. A chlorinium ion transfer is suggested.     

Kinetic and mechanistic studies of oxidation of alanine and phenylalanine by sodium N-chlorobenzene sulfonamide (chloramine-B) in hydrochloric acid medium

The kinetics of oxidation of alanine and phenylalanine by sodium N-chlorobenzene sulfonamide (CAB) has been investigated at 30°C in two ranges of acid concentrations. The reactions follow identical kinetics for both amino acids. At low acid concentration (0.03–0.10M), simultaneous catalysis by H⁺ and Cl^? ions is noted. The rate shows a first-order dependence on [CAB], but is independent of [substrate]. A variation of the ionic strength or the dielectric constant of the medium or the presence of the added reaction product benzene sulfonamide (BSA) has no pronounced effect on the rate. At [HCl] > 0.2M, the rate is independent of [H⁺], but shows a first-order dependence on [CAB] and a fractional-order dependence on [amino acid]. The addition of BSA or Cl^? ions, or a change in the ionic strength of the medium has no influence on the rate. Upon decreasing the dielectric constant of the medium, the rate increased, indicating positive ion–dipole interaction in the rate-determining step. The reaction was studied at different temperatures, and activation parameters have been computed. Rate laws in agreement with experimental results have been derived. Suitable mechanisms to account for the observed kinetics are proposed. The rate constants obtained from the derived rate laws as [H⁺], [Cl^?], and [substrate] vary are in excellent agreement with the observed rate constants, thus justifying the proposed rate laws and hence the suggested mechanistic schemes.