Band gap behaviours of periodic magnetoelectroelastic composite structures with Kagome lattices

In this paper, the elastic wave propagation in periodic cylinder magnetoelectroelastic composite structures is studied using the plane wave expansion method. The band structure characteristics of magnetoelectroelastic rods embedded in polymer matrix and the reverse case are investigated taking the electric, magnetic and mechanical coupling effects into account. The generalised eigenvalue equation is derived to analyse the in-plane and out-of-plane modes, respectively. The numerical calculations for both the cases with Kagome lattices are performed. The relation between the gap widths and filling fractions are discussed in detail. The effects of the magnetoelectricity on the band structures and widths of band gaps are analysed. The band gap characteristics are illustrated further and the results will be helpful to design such kind of composite structures.     

Giant enhancement of second-harmonic generation from a nanocavity metasurface

Nonlinear plasmonic metasurfaces are compatible with complementary metal oxide semiconductor technology and highly promising for on-chip optical switching and modulations and nanoscale frequency conversions. However, the low nonlinearoptical response of metasurface devices limits their practical applications. To circumvent this constraint, we propose the design of a nanocavity plasmonic metasurface, in which the strong light localization in the nanocavity can be used to boost the efficiency of second-harmonic generation. Compared with the single-layer counterpart, experimental results show that the intensity of the second-harmonic waves in the nanocavity metasurface is enhanced by ~790 times. The proposed nanocavity plasmonic metasurfaces in this work may open new routes for developing highly efficient nonlinear metacrystals for on-chip nonlinear sources,nonlinear image encryption, information processing, and so on.     

Measuring the topological charge of an optical vortex by using a tilted convex lens

We demonstrate, analytically and experimentally, a simple, but effective method to determine the topological charge of an optical vortex by using a spherical bi-convex lens, a ubiquitous optical element found in any optics laboratory. Just by tilting the lens and recording the intensity distribution of a propagating vortex at a predicted position past the lens, we have been able to measure both the sign and the magnitude of the topological charge m   up to m=±14$m=\pm 14$. Our experimental results are in excellent agreement with analytical predictions.     

Pattern generation using axicon lens beam shaping in two-photon polymerisation

The fabrication of three-dimensional microstructures by two-photon polymerisation has been widely reported as a viable route to the development of photonic crystals, rotors, bridges and other complex artefacts requiring nanoscale resolution. Conventionally, single point serial writing is used to write the structures but recently multipoint beam delivery using beam division optics has been reported as a method of introducing parallel processing. In this paper we present an alternative and novel approach using an axicon lens to give profiled beam delivery. This enables complete three-dimensional annular structure fabrication without the use of scanning stages. In addition, the concept of axicon delivery is developed further to investigate three-dimensional structure as a function of axicon geometry.A Ti:sapphire laser, with wavelength 795 nm, 80 MHz repetition rate, 100 fs pulse duration and an average power of 700 mW, was used to initiate two-photon polymerisation. The axicon was used, in combination with a 100× microscope objective, to form representative three-dimensional structures based on the annular cell with varying diameter. The structures were written in a Zr-loaded resin prepared on a glass substrate using dip coating deposition of a Zr/PMMA hybrid prepared by the sol-gel method. Annuli with diameters up to 50 μm were characterised in terms of topography and surface roughness using SEM and Zygo interferometer. The writing technique was also extended to fabrication of stacked structures.     

Frontispiece: Planar bifunctional Luneburg‐fisheye lens made of an anisotropic metasurface

Luneburg lens and Maxwell‐fisheye lens are wellknown microwave and optical devices with distinct focusing properties. Xiang Wan et al . present a planar bifunctional Luneburg‐fisheye lens made of an anisotropic metasurface (pp. 757–765), which features as a Luneburg along the horizontal optical axis, while as a fisheye along the vertical optical axis. A method to control the inhomogeneous indices of refraction along the two optical axes independently is proposed by designing an anisotropic and nonuniform metasurface, which can provide the required distributions of refractive indices approximately for Luneburg and fisheye lenses viewing from the two optical axes. The proposed method opens up an avenue to design other kinds of bifunctional devices using metasurfaces in the microwave, terahertz, and even optical ranges. The figure shows the schematic diagram of the designed anisotropic metasurface lens, in which the big blue and red arrows indicate the directions of two optical axes. U‐s haped metallic particles constitute the whole metasurface lens, which acts as a Luneburg lens when observed f rom the direction of the blue arrow, but as a Fisheye lens when observed from the direction of the red arrow.     

Experimental research on high density data storage using solid immersion lens

We have set up a solid immersion lens (SIL) near-field static recording system for demonstrating preliminarily the feasibility of SIL technology in the higher density storage. The experimental result with recording mark size of 240 nm is obtained corresponding to a potential of density of tens of gigabits per square inch. Some factors in the SIL near-field recording are discussed.     

有限距离的凸非球面的透镜补偿检验方法

在用刀口检验凸双曲面反射镜时,一般采用传统的Hindle球检测法,但是在许多仪器中,需要曲面反射镜全口径使用,因此,Hindle球检测法是不合适的。此外,在很多情况下,刀口到待检非球面的距离很长,从而降低了刀口检验精度。为了解决这些问题,结合口径Φ=120mm的凸双曲面的检测,在分析了传统检验方法的基础上,提出了有限距离球面波入射的凸非球面透射补偿检验方法。从设计结果上看,它缩短了刀口到待检非球面的距离,获得高精度补偿。实践表明,这种方法不仅能够提高加工效率,而且提高了加工精度,实际加工完成后,这块凸双曲面的RMS值达到了λ/60。     

Studies of two-dimensional lattices using ferrofluid

By exerting a magnetic filed H normal to a ferrofluid layer, a triangular lattice of droplets is formed when H exceeds a characteristic critical field. The lattice may be “heated” by reducing H and the effects of dislocations and disclinations may be studied. This offers a new experimental system for direct visual observations of phenomena related to two-dimensional melting.     

Optical microwave generation using two parallel DFB lasers integrated with Y-branch waveguide coupler

A new device of two parallel distributed feedback (DFB) lasers integrated monolithically with Y-branch waveguide coupler was fabricated by means of quantum well intermixing. Optical microwave signal was generated in the Y-branch waveguide coupler through frequency beating of the two laser modes coming from two DFB laser in parallel, which had a small difference in frequency. Continuous rapid tuning of optical microwave signal from 13 to 42GHz were realized by adjusting independently the driving currents injected into the two DFB lasers.     

Femtosecond pulse generation using stimulated Raman scattering in integrated silicon optical waveguide device

To generate ultrafast femtosecond optical pulses, we propose a model of an integrated device consisting of a Mach-Zehnder interferometer (MZI) with two symmetric 3 dB directional couplers and a straight waveguide based on the single-mode silicon-on-insulator (SOI) optical waveguide. The principle of pulse generation in the presented device is based on the strong stimulated Raman scattering (SRS) in silicon; the center wavelength of the pulse generated is tunable by changing the center wavelength of the co-propagating pump pulse. Numerical results show that, when a continuous wave (CW) with a weak power at 1670 nm wavelength and a pump pulse with a high peak power at 1550 nm wavelength are co-propagating, a narrow femtosecond pulse with a pulse width (full width at half maximum, FWHM) of ∼60 fs (FWHM of the pump pulse is 166.5 fs) can be achieved in the device proposed. In addition, when the waveguide length, pump peak power, and pump-pulse width are fixed, the properties of generated femtosecond pulse depend strongly on the incident chirp of the pump pulse and the CW power.     

GHz frequency band soliton generation using integrated ring resonator for WiMAX optical communication

New system of optical soliton signal generation with a high frequency band is presented. Microring resonator can be used to generate soliton signals with high frequency of GHz. These signals can be transmitted via a wireless network system known as WiMAX, which is providing broadband wireless access up to 50 km. The soliton pulses are more stable with less loss during propagation which is good candidate compare to other current optical waves used in optical communication. In this study, soliton pulses with full width at half maximum of 3 MHz and FSR of 85 MHz could be generated using an add/drop filter system which is used to generate high frequency signals, required for wireless network systems. These pulses can be used as carrier signals in order to transmit information codes without significant changes, thus improving transmission quality and delivery of the right information.     

Experimental control of pattern formation by photonic lattices

We study the control of modulational instability and pattern formation in a nonlinear dissipative feedback system with a periodic modulation of the material refractive index. We use a one-dimensional photonic lattice in a single-mirror feedback configuration and identify three mechanisms for pattern control: bandgap suppression of instability modes, periodicity induced pattern modes, and orientational pattern control.     

Sub wavelength multiple focal spot generation of high NA objective lens using diffractive optical element

In this article, based on the vector diffraction theory, the effect of specially designed phase modulating optical element by means of an incident tightly focused azimuthally polarized Bessel Gaussian beam in the focal region of high NA lens is investigated numerically. It is observed, that a specially designed diffractive optical modulation element (DOE) can generate multiple focal spot segment of transversely polarized in the focal region by controlling the angles of DOE. Such kind of sub wavelength transversely polarized focal spots segment may find wide applications in multiple optical traps and optical manipulation technology.     

Modeling of integrated Lamb waves generation systems using a coupled finite element-normal modes expansion method

As part of the research work on Smart Materials and Structures, the development of self-monitoring materials is an emerging issue. In the case of plate-shaped structures, Lamb waves can be used for their relevant properties: long-range propagation, sensitivity to internal flaws and whole-thickness interrogation. This concept requires the use of thin piezoelectric transducers integrated to the structure. Since it is of primary importance to be able to control the generated modes, a suitable modeling technique of this kind of system has been tested on different cases of practical interest. The model uses a coupled finite element-normal modes expansion approach, which allows one to consider either the case of bonded or embedded transducers. The results presented deal with examples of multi-element transducers integrated to composite materials. The influence of parameters such as the dimensions, positions and relative excitation delays of the transducers is studied.     

Multi-wavelength discrete pulse train generation using chromatic aberration of time lens for ultrafast single-shot optical imaging

Optical Review - We investigate a multi-wavelength discrete pulse train generation technique in which a relative delay is precisely controlled by a chromatic aberration of a time lens for...     

利用振幅光栅生成拉盖尔、高斯光束的实验研究

拉盖尔高斯(Laguerre-Gaussian，LG)光束由于其独特的相位结构和轨道角动量特性在微粒旋转操纵和信息处理等方面得到了越来越多的重视.对利用振幅型叉状衍射光栅产生LG光束进行了理论分析，采用计算全息图的方法制作了振幅型叉状衍射光栅，实验上获得了角量子数为±1的LG光束，并对光束变换过程中影响光束特性的主要因素进行了讨论.     

Optical pulse shaper with integrated slab waveguide for arbitrary waveform generation using optical gradient force

Integrated optical pulse shaper opens up possibilities for realizing the ultra high-speed and ultra wide-band linear signal processing with compact size and low power consumption. We propose a silicon monolithic integrated optical pulse shaper using optical gradient force, which is based on the eight-path finite impulse response. A cantilever structure is fabricated in one arm of the Mach–Zehnder interferometer（MZI） to act as an amplitude modulator. The phase shift feature of waveguide is analyzed with the optical pump power, and five typical waveforms are demonstrated with the manipulation of optical force. Unlike other pulse shaper schemes based on thermo–optic effect or electro–optic effect, our scheme is based on a new degree of freedom manipulation, i.e., optical force, so no microelectrodes are required on the silicon chip,which can reduce the complexity of fabrication. Besides, the chip structure is suitable for commercial silicon on an insulator（SOI） wafer, which has a top silicon layer of about 220 nm in thickness.     

用于大孔径凸非球面检测的部分补偿透镜的优化设计

针对部分补偿法和子孔径拼接技术对大孔径凸非球面进行测量时,部分补偿透镜的优化设计是关键技术之一,基于ZEMAX软件对用于大孔径凸非球面的部分补偿透镜进行了优化设计,以波前斜率作为优化目标,通过直接观察弥散圆半径对全口径的光线进行优化。设计结果表明,用结构简单的单片部分补偿透镜即可实现对大孔径凸非球面的面形测量,在不同的子孔径区域,部分补偿系统在理想焦面处的弥散圆最大半径均小于165 μm,满足设计要求,验证了结合部分补偿法和子孔径拼接技术测量大孔径凸非球面的可行性。     

Thermal lens compensation by convex deformation of a flat mirror with variable annular force

An optical surface with convex parabolic shape over a large area has been created using a 12.7-mm-diameter annular pusher to deform a flat 25.4-mm-diameter mirror. The deformable mirror assembly has been modeled using finite element analysis software as well as analytical solutions. The measured parabolic surface deformation shows good agreement with those models. Mirror performance was studied using a Shack–Hartman wavefront sensor and the mirror has been applied to compensate thermal lensing in a Nd:YAG rod amplifier. PACS 41.85.Ct; 42.60.Da