Photoresponsive ion-selective optical sensor

A novel concept of photoresponsive ion-selective optical sensor is described. Photochemical reactions can be utilized to generate and control ion fluxes in an ion-selective optode in the same manner as nonequilibrium electrochemical methods have been used in ion-selective electrodes. In contrast to their equilibrium counterparts, the photoresponsive pH-selective ion optodes are sensitive to both the buffer capacity of the sample and activity of hydrogen ions. Active optical probes are especially attractive for intracellular applications because they can be fabricated as submicron-sized beads. Common optical techniques, such as fluorescence microscopy and flow cytometry, can be combined with active ion probes with only minor modification of the existing experimental setup.     

Kinetic considerations of ion selectivity coefficients of ion-selective electrodes based on neutral carriers

Ion selectivity coefficients of ion-selective electrodes based on neutral carriers are described by means of a mixed potential model of ion transport reactions at the aqueous solution/ion-sensitive membrane interface. The decrease in ion selectivity can be explained by the deviations from the equilibrium conditions, which arise from the ionic partial current across the interface, but the proposed correspondence of the exchange current density of ion transfer reactions with the ion selectivity coefficients is rationalized only for certain conditions of the kinetic parameters. The ion selectivity for liquid membrane transport is discussed starting from three different rate-determining steps. It is shown that the potentiometric selectivities of ion-selective electrodes and the transport selectivities are correlated when the ionic transfer across the aqueous solution/ membrane interface is fast compared with the complex ion transport through the membrane. The significance of a kinetic approach for the design of neutral carriers for ion-selective electrodes is stressed.     

Development of a potassium-selective optode for hydroponic nutrient solution monitoring

Highly efficient and reliable plant growth such as that required in biological life support systems for future space-based missions can be better achieved with knowledge of ion concentrations within the hydroponic nutrient solution. This paper reports on the development and application of ion-selective bulk optodes to plant growth systems. Membranes for potassium-selective sensing are reported that have been tailored so that their dynamic range is centred on potassium activities within typical nutrient solution recipes. The developed sensors have been shown to exhibit a potassium activity measuring range from 0.134 to 117 mM at pH 6.0. These bulk optodes show full scale response on the order of several minutes. They show minimal interference to other cations and meet worst-case selectivity requirements for potassium monitoring in the considered half strength Hoagland solution. When continuously immersed in nutrient solution, these sensors demonstrated predicable lifetimes on the order of 50 h. The developed instrument for absorption-based measurements including light source, mini-spectrometer and optode probe is presented. Custom instrument control and monitoring software including a spectral normalization procedure, use of a dual-wavelength absorbance ratio technique and automatic adjustment for pH variation result in an instrument that is self-calibrating and one that can account for effects such as light source fluctuations, membrane thickness variations and a variety of other factors. The low mass, low volume nature of bulk optode sensing systems, make them a promising technology for future space-based plant production systems. Their low-cost and technology transfer potential suggest that they could provide terrestrial growers a new and reliable mechanism to obtain ion-selective knowledge of their nutrient solution, improving yields, reducing costs and aiding in compliance to continually more stringent environmental regulation.     

Phosphate-selective fluorescent sensing microspheres based on uranyl salophene ionophores

Optical dihydrogen phosphate-selective sensors that function on the basis of bulk optode principles and are based on two different uranyl salophene ionophores are reported here for the first time. The influence of the optode composition and measuring conditions such as sample pH on the optode response are characterized, along with sensor selectivity and long-term stability. Three plasticizers of different polarity are considered for optode fabrication: bis(2-ethylhexyl)sebacate (DOS), dodecyl 2-nitrophenyl ether (o-NPDDE), o-nitrophenyloctylether (o-NPOE). The compounds 9-(diethylamino)-5-(octadecanoylimino)-5H-benzo[a]phenoxazine (ETH 5294, chromoionophore I) and 9-(diethylamino)-5-[(2-octyldecyl)imino]benzo[a]phenoxazine (ETH 5350, chromoionophore III) are used as H⁺-selective fluoroionophores that also act as reference ionophores. The resulting optode-based sensors are compared with their ion-selective electrode (ISE) counterparts, and it is revealed that optodes are better suited for operation at physiological pH. The best optode performance was found for the two component optode sensors doped with ETH 5350 and phosphate ionophore(I). The linear range of these sensor was log a = −6.0 to −2.6. Dihydrogen phosphate-selective optode sensors of optimized composition are fabricated in microsphere format and preliminary measurements in diluted sheep blood samples are presented.     

Synthesis and Characterization of a New Neutral Ionophore for Use in Bulk Optode

Chemical sensors based on optical signal detection are of increasing importance. Optical sensors of bulk optodes have the advantage of being robust and showing a highly reversible response explainable by means of the chemical equilibria involved. Therefore, a great number of new ion-selective bulk optodes have reported within a few years. Several sensors for detecting toxicologically revalant ions,such as Pb²⁺,Ag⁺,Hg²⁺ and UO₂²⁺ have been developed recently and exhibit the low detection limit required. Although a number of ionophores have been used in optodes and ISEs,the sensors described so far are inadequate for monitoring Ag⁺ in water, especially in drinking water because of their limited selectivity and/or insufficient sensitivity. More recently Pretsch et al designed and synthesized an improved optical sensor, methylene bis(2-thiobenzothiazole),which was Ag⁺-selective. Here we report synthesis of another ionophore,1,2-bis(2-thiobenzothiazole) ethane, and its IR, ESI-MS, ¹HNMR and UV-Vis.     

Neutral-carrier-type potassium ion-selective electrodes based on polymer-supported liquid-crystal membranes for practical use.

Polymer-supported liquid-crystal membranes have been designed for neutral-carrier-type potassium ion-selective electrodes, aiming for practical applications of high-performance liquid-crystalline membrane ion sensors. Two types of polymer-supported liquid-crystal membranes were tested for their usefulness; one is microporous poly(tetra fluoroethylene) (PTFE) membranes impregnated by thermotropic liquid-crystalline compounds, and another is poly(methyl methacrylate) (PMMA) membrane dispersing the same liquid-crystalline compounds. Both of the polymer-supported liquid-crystal membranes containing a liquid-crystalline benzo-15-crown-5 neutral carrier as well as a lipophilic anion excluder work well as ion-sensing membranes for potassium ion-selective electrodes, the ion selectivities of which can be switched by the measurement temperatures. Specifically, PTFE-impregnated liquid-crystal membranes are better than the PMMA-dispersed ones in the sensitivity and selectivity of the resulting ion electrodes. A potassium ion assay in blood sera has proved that neutral-carrier-type ion-selective electrodes based on the polymer-supported liquid-crystal membranes are reliable for practical uses.     

Hydrogen-Bonding Ionophores for Inorganic Anions and Nucleotides and Their Application in Chemical Sensors

The potential and limits of hydrogen-bonding ionophores and their use in chemical sensors are discussed. Several hydrogen-bonding bis-thiourea ionophores have been found to complex inorganic anions, among them most strongly H2PO4-. Using such ionophores, ion-selective electrodes for chloride and sulfate have been developed. Furthermore, hosts that bind nucleotides with up to five hydrogen bonds have been synthesized. They have been applied in nucleotide selective electrodes, optodes and voltammetric sensors mimicking ion channels.     

How Far the Ion-Selectivity Should be Improved; a Task Oriented Limit of Ion-Selective Electrode Design

Abstract

A simple formula is proposed for the definition and the calculation of the highest acceptable selectivity coefficient values of ion-selective electrodes. On the basis of the formula which is based on the consideration of the precision of the direct potentiometric measuring techniques one can easily decide whether the selectivity of an electrode is sufficient or not for solving a well defined analytical task correctly. On the other, hand it indicates clearly for ion-selective electrode developing teams or manufacturers how far the ion-selectivity of an electrode should be improved for a certain type of analytical application.

Characteristic selectivity values for a few concrete analytical sample types are given in table together with the selectivity coefficients of the corresponding, existing ion-selective electrodes.     

四苯硼酸盐PVC膜锂离子选择电极的研究

四苯硼酸盐与介体溶剂所组成的PVC膜对碱金属离子的选择性同溶剂的性质有关^[1]。因此,可选择适当的溶剂研制碱金属离子选择电极。本工作研究了以DOPP(苯基膦酸二辛酯)或TBP(磷酸三丁酯)为介体溶剂,NaTPB(四苯硼钠)或KTPB(四苯硼钾)为活性物质的PVC膜对金属离子的选择响应。结果表明,DOPP为溶剂、KTPB为活性物质可制备性能良好的PVC膜Li⁺选择电极。该电极的电化学性能接近或优于新近报道的几种Li⁺选择电极^[2~7]。     

Optimizing the analytical performance and construction of ion-selective electrodes with conducting polymer-based ion-to-electron transducers

All-solid-state ion-selective electrodes that use a conducting polymer as the ion-to-electron transducer have emerged as one of the most promising classes of all-solid-state potentiometric sensors in recent years. This is largely because it has many analytical advantages, including high response stability, which is unique in the field of internal-solution-free ion-selective electrodes. This paper reviews the considerable progress that has been made in this area of sensing in recent years, in terms of detection limits, selectivity coefficients and novel construction methods.     

An evaluation of solvent mediators for ion-selective electrode membranes based on calcium bis(dialkylphosphate) sensors trapped in poly(vinyl chloride) matrices

This study on several alkan-1-ols, di-n-octylphenyl phosphorate and di-n-nonyl phthalate as solvent materials in ion-selective electrode membranes based on calcium bis(dialkylphosphate) sensors trapped in a PVC matrix indicates that the best electrodes are made with di-n-octylphenyl phosphonate. These are selective for calcium. The liquid alcohols readily exude from the PVC matrix, and solid alcohols are completely unsuitable for membrane fabrication. However, despite a tendency to be exuded, decan-1-ol gives acceptable electrodes responsive to bivalent cations if calcium bis (di-2-ethylhexylphosphate) is used as sensor. Several selectivity coefficients, k(caj), greater than unity were found, but though such values for j = Na or K do not involve complete loss of selectivity towards calcium, a value of K(CaCu) = 13 for a membrane with di-n-nonyl phthalate as mediator and calcium bis(di-n-decylphosphate) as sensor indicates greater selectivity for copper than for calcium.     

Studies on the Preparation and Analytical Applications of Various Metal Ion-Selective Membrane Electrodes Based on Polymeric,Inorganic and Composite Materials—A Review

Ion-selective membrane electrodes commonly known as electrochemical sensors are important in view of the ability to make direct or indirect measurement of various metal ions. The fact is that the use of ion-selective electrodes for such type of measurements requires relatively inexpensive equipment, which makes ion-selective electrodes attractive to scientists in many disciplines. Thus, potentometric sensors can offer an inexpensive and convenient method for the analysis of heavy metal ions in solutions providing acceptable sensitivity and selectivity. For this purpose, many organic, inorganic, chelating, intercalating and composite materials were studied as electroactive materials for the preparation of ion-selective membrane electrodes. The present study provides a detailed review of literature for the fabrication, characterization and analytical applications of ion-selective membrane electrode based on different electro active components.     

Poly(vinyl chloride)-membrane ion-selective bulk optode based on 1,10-dibenzyl-1,10-diaza-18-crown-6 and 1-(2-pyridylazo)-2-naphthol for Cu and Pb ions

An ion-selective bulk optode (ISBO) for sensing Cu²⁺ and Pb²⁺ ions based on plasticized poly(vinyl chloride) containing 1,10-dibenzyl-1,10-diaza-18-crown-6 (DBzDA18C6) as ionophore and 1-(2-pyridylazo)-2-naphthol (PAN) as chromoionophore was prepared. The effects of DBzDA18C6/PAN and NaTPB/PAN mole ratios on the response behavior of the ISBO were investigated. The ISBO membrane shows enhanced selectivities for Cu²⁺ (at 530 nm) and Pb²⁺ (at 467 nm) over alkali, alkaline earth and other transition metal ions. The optical selectivity coefficients were measured using the separate solution method (SSM) in the two corresponding wavelengths at pH=5. The detection limit for Cu²⁺ and Pb²⁺ are 3.2×10⁻⁷ and 1.0×10⁻⁸ M, respectively.     

Screen-printed copper ion-selective electrodes

A simple, low-cost and reproducible method for the mass production of potentiometric ion-selective electrodes for copper ions is presented. These planar, strip sensors were obtained by screen-printing. The application of pastes cured at low temperature allows printing of the sensors on low-cost, plastic substrates. The pastes for printing of ion-sensitive thick-film membranes were based on copper (I) and copper (II) sulfides. The analytical characteristics of the thick-film electrodes were compared. The analytical properties (range of determination, sensitivity, selectivity, response time) of the copper (I) sulfide-based sensors were comparable with those for conventional ion-selective electrodes. Received: 12 January 2000 / Revised: 13 March 2000 / Accepted: 16 March 2000     

流动载体膜阴离子选择电极电位选择性系数规律的探讨

离子选择电极的电位选择性系数K_ij^Pot是衡量电极性能的重要参数。电位选择性系数规律已经有过讨论^[1-3]。本文将对流动载体膜阴离子选择电极电位选择性系数与阴离子结构参数(z/r²)_j的关系进行讨论。     

Spectral density analysis of nuclear spin-spin coupling : I. A Hulthén potential LCAO model for JX-H in hydrides XH4

A spectral density function has been calculated for the indirect nuclear spin-spin coupling in hydrides XH₄, using a simple LCAO model for the X-H fragment. The basis consists of bound and continuum solutions is a Hulthén screened Coulomb potential, and a hydrogen atomic orbital. The reduced coupling constant, K, is an integral over all momenta, k, of this spectral density function. The calculated values of K are about half from the experimental ones, but the 23-fold increase of K from C-H to Pb-H is successfully interpreted by the model. The “high-energy tail” contribution to K from k > 10² au is found to be of the relative order of 10⁻⁴ for all systems considered.     

Kinetics and mechanisms of the redox reaction of hexaaquotitanium(III) and the ethylenediamine tetraacetato titanium(III) complex by aqueous solutions of bromine

At 25°C, I = 1.0 M (CF₃SO₃⁻Li⁺+CF₃SO₃H), [H⁺] = 0.034–0.274 M and λ = 453 nm, the rate equation for the oxidation of Ti(H₂O), ₆³⁺ by bromine was found to be: −d/[Br₂]T/dt=kK/[Br₂][Ti^III]/[H⁺]+K+kK/[Br₃⁻][Ti^III]/[H⁺+K, where k = 9.2 × 10⁻³ M ⁻¹ s ⁻¹ and K = 4.5 × 10⁻³ M. At [H⁺] = 1.0 M, [Br⁻] = 0.05–0.4 M, the apparent second-order rate constant decreases as [Br⁻] increases.

The pH-dependence of the oxidation of Ti^III-edta by bromine is interpreted in terms of the change in identity of the Ti^III-edta species as the pH of the reaction medium changes. The second-order rate constants were fitted using a non-linear least-square computer program with (1/k₀^edta)² weighting into an equation of the form: k₀^edta =k₁+k₂K₁[H⁺]⁻¹+k₃K₁K₂[H⁺]^−2/1+K₁[H⁺[H⁺⁻¹+K₁K₂[H⁺]⁻², with K₁ and K₂ fixed as earlier determined at 9.55 × 10⁻³ and 2.29 × 10⁻⁹ M, respectively, for the oxidation of bromine. k₁=k₂=(3.1±0.32)×10³M⁻¹s⁻¹ k₃=(2.3±0.45)×10⁶N⁻¹s⁻¹.

It is proposed that these electron transfer reactions proceed by univalent changes with the production of Br₂^.− as a transient intermediate. An outer-sphere mechanism is proposed for these reactions. The homonuclear exchange rate for Ti^III-edta+Ti^IV-edta is estimated at 32 M⁻¹ s⁻¹.     

Polymerized Nile Blue derivatives for plasticizer-free fluorescent ion optode microsphere sensors

Lipophilic H⁺-selective fluorophores such as Nile Blue derivatives are widely used in ISE-based pH sensors and bulk optodes, and are commonly dissolved in a plasticized matrix such as PVC. Unfortunately, leaching of the active sensing ingredients and plasticizer from the matrix dictates the lifetime of the sensors and hampers their applications in vivo, especially with miniaturized particle based sensors. We find that classical copolymerization of Nile Blue derivatives containing an acrylic side group gives rise to multiple reaction products with different spectral and H⁺-binding properties, making this approach unsuitable for the development of reliable sensor materials. This limitation was overcome by grafting Nile Blue to a self-plasticized poly(n-butyl acrylate) matrix via an urea or amide linkage between the Nile Blue base structure and the polymer. Optode leaching experiments into methanol confirmed the successful covalent attachment of the two chromoionophores to the polymer matrix. Both polymerized Nile Blue derivatives have satisfactory pH response and appropriate optical properties that are suitable for use in ion-selective electrodes and optodes. Plasticizer-free Na⁺-selective microsphere sensors using the polymerized chromoionophores were fabricated under mild conditions with an in-house sonic microparticle generator for the measurement of sodium activities at physiological pH. The measuring range for sodium was found as 10⁻¹-10⁻⁴ M and 1-10⁻³ M, for Nile Blue derivatives linked via urea and amide functionalities, respectively, at physiological pH. The observed ion-exchange constants of the plasticizer-free microsphere were log K_exch = −5.6 and log K_exch = −6.5 for the same two systems, respectively. Compared with earlier Na⁺-selective bulk optodes, the fabricated optical sensing microbeads reported here have agreeable selectivity patterns, reasonably fast response times, and more appropriate measuring ranges for determination of Na⁺ activity at physiological pH in undiluted blood samples.