Transformation of an Imine Cage to a Covalent Organic Framework Film at the Liquid–Liquid Interface

Dynamic covalent chemistry (DCC) opens up a fascinating route for the construction of well-organized supramolecular architectures, starting from organic molecular cages to crystalline macromolecular covalent organic frameworks (COFs). Herein, for the first time, we have manifested a facile room-temperature DCC-directed transformation of discrete organic imine cage-to-COF film at the liquid–liquid interface. The unfolding of the cage leading to the generation of imine intermediates, followed by their interface-assisted preorganization and subsequent growth of the COF film, are elucidated through detailed spectroscopic and microscopic investigations. The interfacial cage-to-COF transformation provides a facile route for the faster fabrication of free-standing COF films with high porosity and crystallinity, demonstrating excellent performance towards molecular sieving and high solvent permeance. Thus, the current study opens up a new route for structural interconversion between two crystalline entities with diverse dimensionality employing DCC at the confined interface.     

Site Engineering of Covalent Organic Frameworks for Regulating Peroxymonosulfate Activation to Generate Singlet Oxygen with 100 % Selectivity

Singlet oxygen (¹O₂) is an excellent reactive oxygen species (ROSs) for the selective conversion of organic matter, especially in advanced oxidation processes (AOPs). However, due to the huge dilemma in synthesizing single-site type catalysts, the control and regulation of ¹O₂ generation in AOPs is still challenging and the underlying mechanism remains largely obscure. Here, taking advantage of the well-defined and flexibly tunable sites of covalent organic frameworks (COFs), we report the first achievement in precisely regulating ROSs generation in peroxymonosulfate (PMS)-based AOPs by site engineering of COFs. Remarkably, COFs with bipyridine units (BPY-COFs) facilitate PMS activation via a nonradical pathway with 100 % ¹O₂, whereas biphenyl-based COFs (BPD-COFs) with almost identical structures activate PMS to produce radicals (⋅OH and SO₄^.−). The BPY-COFs/PMS system delivers boosted performance for selective degradation of target pollutants from water, which is ca. 9.4 times that of its BPD-COFs counterpart, surpassing most reported PMS-based AOPs systems. Mechanism analysis indicated that highly electronegative pyridine-N atoms on BPY-COFs provide extra sites to adsorb the terminal H atoms of PMS, resulting in simultaneous adsorption of O and H atoms of PMS on one pyridine ring, which facilitates the cleavage of its S−O bond to generate ¹O₂.     

Self-Accelerating Effect in a Covalent–Organic Framework with Imidazole Groups Boosts Electroreduction of CO2 to CO

Solvent effect plays an important role in catalytic reaction, but there is little research and attention on it in electrochemical CO₂ reduction reaction (eCO₂RR). Herein, we report a stable covalent-organic framework (denoted as PcNi-im ) with imidazole groups as a new electrocatalyst for eCO₂RR to CO. Interestingly, compared with neutral conditions, PcNi-im not only showed high Faraday efficiency of CO product (≈100 %) under acidic conditions (pH ≈ 1), but also the partial current density was increased from 258 to 320 mA cm⁻². No obvious degradation was observed over 10 hours of continuous operation at the current density of 250 mA cm⁻². The mechanism study shows that the imidazole group on the framework can be protonated to form an imidazole cation in acidic media, hence reducing the surface work function and charge density of the active metal center. As a result, CO poisoning effect is weakened and the key intermediate *COOH is also stabilized, thus accelerating the catalytic reaction rate.     

Metal Organic Framework Glasses: A New Platform for Electrocatalysis?

Metal organic framework (MOF) glasses are a coordination network of metal nodes and organic ligands as an undercooled frozen-in liquid, and have therefore broadened the potential of MOF materials in the fundamental research and application scenarios. On the road to deploying MOF glasses as electrocatalysts, it remains several basic scientific hurdles although MOF glasses not only inherit the structural merits of MOFs but also endow with active catalytic features including concentrated defects, metal centers and disorder structure etc. The research on the ionic conductivity, catalytic stability and reactivity of MOF glasses has yielded scientific insights towards its electrocatalytic applications. Here, we first comb the history, definition and basic properties of MOF glasses. Then, we identify the main synthetic methods and characterization techniques. Finally, we advance the potentials and challenges of MOF glasses as electrocatalysts in furthering the understanding of these themes.     

Inside/Outside: Post-Synthetic Modification of the Zr-Benzophenonedicarboxylate Metal–Organic Framework

The Zr-based metal–organic framework, Zr-bzpdc-MOF, contains the photoreactive linker molecule benzophenone-4,4′-dicarboxylate (bzpdc) which imparts the possibility for photochemical post-synthetic modification. Upon irradiation with UV light, the keto group of the benzophenone moiety will react with nearly every C−H bond-containing molecule. Within this paper, we further explore the photochemical reactivity of the Zr-bzpdc-MOF, especially with regard to which restrictions govern internal versus external reactions. We show that apart from reactions with C−H bond-containing molecules, the MOF reacts also with water. By studying the reactivity versus linear alcohols we find a clear delineation in that shorter alcohol molecules (up to butanol as a borderline case) react with photoexcited keto groups throughout the whole crystals whereas longer ones react only with surface-standing keto groups. In addition, we show that with the alkanes n-butane to n-octane, the reaction is restricted to the outer surface. We hypothesize that the reactivity of the Zr-bzpdc-MOF versus different reagents depends on the accessibility of the pore system which in turn depends mainly on the size of the reagents and on their polarity. The possibility to direct the post-synthetic modification of the Zr-bzpdc-MOF (selective modification of the whole pore system versus surface modification) gives additional degrees of freedom in the design of this metal–organic framework for shaping and for applications.     

Solvent Effects on kp in Organic Media?: Statement to the Response

A recent response on a publication from our team investigating solvent effects on propagation rate coefficients is commented. Among other issues, we point to the fact that the response interprets only a subset of the data provided in our original contribution.

     

Cyclophanes or Cyclodextrins: What is the Best Host for Aromatic Volatile Organic Compounds?

The first results of the complexing ability of cyclobis-(paraquat-p-phenylene) as supramolecular host with different aromatic volatile organic compounds are presented. The formation constants of cyclobis(paraquat-p-phenylene) with toluene and halogenobenzenes were determined in aqueous solution by static headspace associated with gas chromatography and compared with the ones obtained by cyclodextrins. The data indicated the formation of 1:1 inclusion compounds in both cases. The results underlined a greater complexation ability for cyclobis(paraquat-p-phenylene) which was confirmed by a theoretical study.     

Building Blocks and COFs Formed in Concert—Three-Component Synthesis of Pyrene-Fused Azaacene Covalent Organic Framework in the Bulk and as Films

A three-component synthesis methodology is described for the formation of covalent organic frameworks (COFs) containing extended aromatics. Notably, this approach enables synthesis of the building blocks and COF along parallel reaction landscapes, on a similar timeframe. The use of fragmental building block components, namely pyrene dione diboronic acid as aggregation-inducing COF precursor and the diamines o-phenylenediamine (Ph), 2,3-diaminonaphthalene (Naph), or (1R,2R)-(+)-1,2-diphenylethylenediamine (2Ph) as extending functionalization units in conjunction with 2,3,6,7,10,11-hexahydroxytriphenylene, resulted in the formation of the corresponding pyrene-fused azaacene, i.e., Aza-COF series with full conversion of the dione moiety, long-range order, and high surface area. In addition, the novel three-component synthesis was successfully applied to produce highly crystalline, oriented thin films of the Aza-COFs with nanostructured surfaces on various substrates. The Aza-COFs exhibit light absorption maxima in the blue spectral region, and each Aza-COF presents a distinct photoluminescence profile. Transient absorption measurements of Aza-Ph- and Aza-Naph-COFs suggest ultrafast relaxation dynamics of excited-states within these COFs.     

Painting Proteins with Covalent Labels: What's In the Picture?

Knowledge about the structural and biophysical properties of proteins when they are free in solution and/or in complexes with other molecules is essential for understanding the biological processes that proteins regulate. Such knowledge is also important to drug discovery efforts, particularly those focused on the development of therapeutic agents with protein targets. In the last decade a variety of different covalent labeling techniques have been used in combination with mass spectrometry to probe the solution-phase structures and biophysical properties of proteins and protein—ligand complexes. Highlighted here are five different mass spectrometry—based covalent labeling strategies including: continuous hydrogen/deuterium (H/D) exchange labeling, hydroxyl radical-mediated footprinting, SUPREX (stability of unpurified proteins from rates of H/D exchange), PLIMSTEX (protein-ligand interaction by mass spectrometry, titration, and H/D exchange), and SPROX (stability of proteins from rates of oxidation). The basic experimental protocols used in each of the above-cited methods are summarized along with the kind of biophysical information they generate. Also discussed are the relative strengths and weaknesses of the different methods for probing the wide range of conformational states that proteins and protein-ligand complexes can adopt when they are in solution.     

New Organic Salt from Levofloxacin-Citric Acid: What Is the Impact on the Stability and Antibiotic Potency?

This research dealt with the composition, structure determination, stability, and antibiotic potency of a novel organic salt composed of levofloxacin (LF) and citric acid (CA), named levofloxacin-citrate (LC). After a stoichiometric proportion screening, the antibiotic-antioxidant reaction was conducted by slow and fast evaporation methods. A series of characterizations using thermal analysis, powder X-ray diffractometry, vibrational spectroscopy, and nuclear magnetic resonance confirmed LC formation. The new organic salt showed a distinct thermogram and diffractogram. Next, Fourier transform infrared indicated the change in N-methylamine and carboxylic stretching, confirmed by ¹H nuclear magnetic resonance spectra to elucidate the 2D structure. Finally, single-crystal diffractometry determined LC as a new salt structure three-dimensionally. The attributive improvements were demonstrated on the stability toward the humidity and lighting of LC compared to LF alone. Moreover, the antibiotic potency of LF against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) enhanced ~1.5–2-fold by LC. Hereafter, LC is a potential salt antibiotic-antioxidant combination for dosage formulas development.     

How can immunochemical methods contribute to the implementation of the Water Framework Directive?

Immunochemical methods (in particular immunoassays) have been applied to spring and surface water samples, respectively, which were set-up as reference materials (RM) within two proficiency testing campaigns. For the first set of proficiency tests (PTs) described here (which were actually the second round of PTs organized, spring 2005), three ELISAs (enzyme-linked immunosorbent assays) were employed in the enzyme tracer format for isoproturon, diuron, and atrazine, respectively. Results were evaluated in comparison with conventional reference methods (LC, GC). Based on their Z-score laboratory performances, the results for isoproturon and diuron were satisfactory, both for fortified spring water and for the blind solution. The results for atrazine were strongly influenced by other triazines present and needed detailed interpretation. For the second set of PTs described here (which were actually the third round of PTs organized, spring 2006), two ELISAs in the coating antigen format were used for isoproturon and diuron, and the result was included with the results obtained by conventional methods during the PTs. The results (the Z-scores) for isoproturon were again classified as satisfactory, in both fortified surface water and blind solution. The results for diuron in ELISA showed an influence of the water matrix, while the analysis of the blind solution was satisfactory. In addition, an ELISA in the enzyme tracer format was applied to analyze isoproturon, diuron, and atrazine in surface water samples, which had been set-up and spiked during a field trial (tank experiment) at the Maas River at Eijsden, The Netherlands. The immunoassay results were compared with those from an in-house on-line SPE LC/MS–MS used as reference. Although the immunochemical results were sometimes higher than those determined in the reference analysis, the general concentration trends in the samples were similar. The contribution of immunochemical methods to the implementation of the European Water Framework Directive is also discussed.     

What can nano-chemistry offer to the paint industry?

Iron surface was modified by organic, self assembled nano-layer of 1,7-diphosphono heptane. The self-assembling film formation and the self-healing process of the injured layers was monitored by electrochemical methods. The morphological changes of paint and lacquer layers which was due to different pre-treatments were monitored by surface analyzing techniques.     

What Difference Does a Methyl Group Make: Pentamethylbenzene?

The crystal structure of pentamethylbenzene has been obtained for the first time with the use of synchrotron radiation, whilst the low‐energy spectrum of lattice dynamics, dominated by the methyl group torsions, was obtained using inelastic neutron scattering. The effect of symmetry lowering by the removal of a single methyl group relative to hexamethylbenzene has been investigated, including the role that this plays in the charge‐transfer characteristics of complexes formed with tetracyanoethylene.     

What is an element? What is the periodic table? And what does quantum mechanics contribute to the question?

This article considers two important traditions concerning the chemical elements. The first is the meaning of the term “element” including the distinctions between element as basic substance, as simple substance and as combined simple substance. In addition to briefly tracing the historical development of these distinctions, I make comments on the recent attempts to clarify the fundamental notion of element as basic substance for which I believe the term “element” is best reserved. This discussion has focused on the writings of Fritz Paneth which are here analyzed from a new perspective. The other tradition concerns the reduction of chemistry to quantum mechanics and an understanding of chemical elements through their microscopic components such as protons, neutrons and electrons. I claim that the use of electronic configurations has still not yet settled the question of the placement of several elements and discuss an alternative criterion based on maximizing triads of elements. I also point out another possible limitation to the reductive approach, namely the failure, up to now, to obtain a derivation of the Madelung rule. Mention is made of some recent similarity studies which could be used to clarify the nature of ‘elements’. Although it has been suggested that the notion of element as basic substance should be considered in terms of fundamental particles like protons and electrons, I resist this move and conclude that the quantum mechanical tradition has not had much impact on the question of what is an element which remains an essentially philosophical issue.