Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Exchange reactions of distibines

Distibines of the type R₂SbSbR′₂ with R = CH₃, R′ = C₂H₅ (1), R = CH₃, R′= n-C₃H₇ (2), R = CH₃, R′= C₆H₅ (3), R = C₂H₅, R′= C₆H₅ (4), R = n-C₃H₇, R′ = C₆H₅ (5), and R = CH₃, R′ = 2,4,6-(CH₃)₂C₆H₂ (6) are formed in equilibria by exchange reactions of the respective distibines of the type R₄Sb₂ and R′₄Sb₂.     

New organogold(I) complexes: Synthesis, structure, and dynamic behavior of the polynuclear organogold diphenylmethane and diphenylethane derivatives

Two organogold derivatives of diphenylmethane and diphenylethane, Ph₃PAu(o-C₆H₄)CH₂(C₆H₄-o)AuPPh₃ (1) and Ph₃PAu(o-C₆H₄)(CH₂)₂(C₆H₄-o)AuPPh₃ (2), have been synthesized by the reaction of ClAuPPh₃ with Li(o-C₆H₄)CH₂(C₆H₄-o)Li and Li(o-C₆H₄)(CH₂)₂(C₆H₄-o)Li respectively. The interaction of 1 with dppe results in the replacement of the two PPh₃ groups to give a macrocyclic compound (3) that includes an Au Au bond. Compounds 1 and 2 react with one or two equivalents of [Ph₃PAu]BF₄ to form new types of cationic complex [CH₂(C₆H₄-o)₂(AuPPh₃)₃]BF₄ (4), [CH₂(C₆H₄-o)₂(AuPPh₃)₄](BF₄)₂ (5), and [(CH₂)₂(C₆H₄-o)₂(AuPPh₃)₄](BF₄)₂ (6). Complexes 1–6 have been characterized by X-ray diffraction studies, FAB MS, and IR as well as by ¹H and ³¹P NMR spectroscopy. A complicated system of Au H-C agostic interactions, involving the bridging alkyl groups (—CH₂— and CH₂-CH₂—) of diphenylmethane and diphenylethane ligands, has been found to occur in complexes 1–3 and 6.     

Preparation and characterization of silicalite-1 membranes prepared by secondary growth of seeds with different crystal sizes

MFI-type zeolite particles of 0.1–1 μm in diameter were prepared by adjusting tetra-n-propylammonium hydroxide (TPAOH) and water contents in synthesis mixtures. Using those particles as seeds, MFI-type zeolite membranes were prepared on the surface of a porous mullite tube by secondary growth. The membranes were formed as polycrystalline zeolite layers on and inside the porous support, and the membranes were composed of the [h 0 h]-oriented crystallites. The membrane consisting of a-oriented crystallites could be also prepared. However, the a-oriented zeolite layers were not active on the permeation properties of butanes. Rather the size and loaded amount of the seed particles influenced on the permeation properties through the membranes. As a result, the n-C₄H₁₀/i-C₄H₁₀ permselectivity could be increased to 220 by adjusting the size and the loaded amount of particles. These results suggest that the number of loaded particles affects on the permeation properties through the membranes.     

Ultrafast dissociation dynamics of ketones at 195 nm

The photodissociation dynamics of the 3s Rydberg state of three ketones (CH₃CO–R, R=C₂H₅, C₃H₇, and iso-C₄H₉) and the ensuing dissociation of the nascent acetyl radical following 195 nm excitation were investigated by ultrafast photoionization spectroscopy. The 3s state the lifetimes of these ketones are similar (2.5–2.9 ps), though lifetimes of the acetyl radical range from 8.6 ps for CH₃CO–C₂H₅, 15 ps for CH₃CO–C₃H₇, to 23 ps for CH₃CO–(iso-C₄H₉), which suggests that for larger R more vibrational degrees of freedom compete for the excess energy so that less energy is partitioned into the internal energy of the acetyl radical.     

Rate coefficients for the reactions of cyclohexadienyl (c-C6H7) radicals with O2 and NO at room temperature

Rate coefficients for the reactions of cyclohexadienyl (c-C₆H₇) radicals with O₂ and NO were measured at 296 ± 2 K. The c-C₆H₇ radicals were detected selectively by laser-induced fluorescence. The rate coefficient for the reaction of c-C₆H₇ with O₂, (4.4 ± 0.5) × 10⁻¹⁴ cm³ molecule⁻¹ s⁻¹, was independent of the bath-gas (He) pressure (13–80 Torr). In the reaction of c-C₆H₇ with NO, thermal equilibrium among c-C₆H₇, NO, and C₆H₇NO was observed. The forward and reverse reactions were in the falloff region, and the equilibrium constant was (1.5 ± 0.6) × 10⁻¹⁵ cm³ molecule⁻¹.     

Studies of N-heterocyclic compounds with triosmium clusters: Formation of the heterocyclic-linked dicluster compound [Os 6(μ-H)2(μ3-C6H4N3)2(CO)18]

The cluster [Os₃(CO)₁₀(MeCN)₂] reacts with indazole (C₇H₆N₂) to give two isomeric products [0s₃(μ-H)(μ-C₇H₅N₂)(CO)₁₀] in which the five-membered ring has been metallated with N-H cleavage to give an N,N-bonded isomer or with C-H cleavage to give a C,N-bonded isomer. These two isomers have very similar X-ray structures but can be clearly distinguished by ¹H NMR methods. They are shown to correspond to related clusters derived from pyrazole. Benzotriazole (C₆H₅N₃) also reacts (as shown earlier by others) to give two isomers: an N,N-bonded species [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀] coordinated only through the five-membered ring and a minor C,N-bonded isomer [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀], metallated at the C₆ ring and coordinated through both rings. The former isomer reacts with Me₃NO in acetonitrile to give [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₉(MeCN)] which thermally looses MeCN to produce the coupled product [Os₆(μ-H)₂(μ₃-C₆H₄N₃)₂(CO)₁₈] which was shown by X-ray structure determination to have all six nitrogen atoms coordinated to osmium, a novel situation for coordinated benzotriazole. The two Os₃ units are linked together by an OsNNOsNN ring in a boat conformation with the whole cluster adopting C₂ symmetry.     

Homochiral cyclopentane-based C1-symmetric P,P ligands C5H8(PPh2)(PR2) from C2-symmetric C5H8(PCl2)2

Treatment of 1,2-trans-C₅H₈(PCl₂)₂ with 1,2-C₂H₄(NHPr-i)₂ gave the C₂-symmetric perhydro-1,6,2,5-diazaphosphocine C₅H₈{P(Cl)N(Pr-i)CH₂}₂-cyclo, which produced dissymmetric C₅H₈(PPh₂){P[N(Pr-i)CH₂]₂-cyclo} on further reaction with PhMgBr. Cleavage of the P---N bonds with gaseous HCl afforded C₅H₈(PPh₂)(PCl₂), which was converted to C₅H₈(PPh₂){P(OPh)₂}₂ by reaction with phenol. All chiral P,P derivatives were obtained as racemates as well as resolved (1R,2R)- and (1S,2S)-enantiomers.     

Microporous Zinc Formate for Efficient Separation of Acetylene over Carbon Dioxide

Separation of acetylene(C₂H₂) from carbon dioxide(CO₂) by adsorbents is very challenging owing to their high similarity on molecular shape and dimension. Exploring inexpensive and easily available porous materials is of importance to facilitate the practical implementation of the challenging but energy-efficient separation. Herein, we utilize an easily available porous material[Zn₃(HCOO)₆] for the selective separation of C₂H₂ over CO₂. Because of the pore confinement in[Zn₃(HCOO)₆](pore size of 0.47 nm) and accessible oxygen sites for preferential binding of C₂H₂, this material exhibits high low-pressure uptake for C₂H₂(63 cm³/cm³ at 10 kPa and 298 K) and high C₂H₂/CO₂ selectivity(7.4 under ambient conditions) that is comparable to those of out-performing porous materials. The efficient separation of[Zn₃(HCOO)₆] for C₂H₂/CO₂ mixture has also been confirmed by the breakthrough experiments.     

Novel liquid-crystalline derivatives of transition metals. The effect of the molecular geometry of the ligands on the mesogenic properties of tetracoordinated copper(II) complexes

The synthesis, characterization and thermal behaviour of several new series of copper(II) complexes derived from carbonylic compounds and their Schiff's bases are reported. The complexes are of two types; [Cu(C₆H₃O(R)-C(X) = O)₂], (type I) and [Cu(C₆H₃O(R)-C(X) = N-R')₂] (type II) where R = - OOC-C₆H₄OC₁₀H₂₁-p, and the position of R is 4 or 5; R' = CH₃, n-C₁₀H₂₁, p-n-C₁₀H₂₁O(C₆H₄)-; X = H, CH₃. In type I complexes, only the compound with X = H and R in position 5 showed mesomorphism. For type II complexes, all the Schiff's bases complexes of copper(II) derived from 2,4-dihydroxybenzaldehyde showed thermotropic mesophases (smectic C and nematic), whereas the complexes derived from 2,5-dihydroxybenzaldehyde were only mesogenic when the imine was derived from methylamine. None of the complexes derived from the ketone (2,4 or 2,5-dihydroxy derivatives) showed liquid-crystalline properties. X-ray studies of four complexes of type II were carried out. The anisotropy of the magnetic susceptibility has a negative sign for complexes with R in position 4 and a positive sign for 2,5-derivative complexes. The relationship between molecular structure and mesomorphic behaviour is discussed.     

添加气对非平衡等离子体转化低碳烷烃的影响

在常压下, 研究了添加气的种类(N₂, He, Ar, H₂, NH₃, CO和CO₂)对介质阻挡放电低碳烷烃(甲烷、 乙烷和丙烷)转化制低碳烯烃的影响. 结果表明, 以甲烷或乙烷为原料时, N₂, He, Ar和CO的引入有利于提高原料的转化率和总烯烃的选择性; 而CO₂, H₂和NH₃的引入对甲烷、 乙烷的转化率无明显影响, 但H₂和NH₃的引入会使总烯烃的选择性显著降低. 以丙烷为原料时, 所研究的添加气均可提高丙烷的转化率, 而只有CO的引入可提高总烯烃选择性. 综上所述, 80%(摩尔分数) CO添加量最有利于低碳烷烃转化成低碳烯烃, 对应的甲烷、 乙烷和丙烷的转化率分别提高了14.4%, 17.6%和42.8%, 总烯烃的选择性分别提高了19.9%, 25.0%和11.9%. 以CH₄为例, 通过对放电电流波形和等离子体区物种的发射光谱(OES)研究发现, 引入CO能显著增加等离子体的电子密度, 并且体系中出现激发态O^*物种(777.5和844.7 nm), 这种O^*物种能够促进C-H键的断裂, 有利于烯烃的生成. 因此, 等离子体区电子密度的增加和激发态O^*物种的出现可能是CH₄-CO体系中CH₄有效转化的主要原因.     

高渗透率ZSM-5沸石膜的合成

沸石膜具有规整的孔道结构和统一的孔径 ,而且耐高温、耐化学侵蚀 ,因而在高温气体分离、蒸汽分离和催化 -分离一体化方面具有广阔的应用前景 ,尤其对烃类异构体如正、异丁烷 ,二甲苯异构体的分离显示了良好的分离性能[1] .沸石膜的合成研究已有很多报道[2～ 7] ,在 ZSM-5沸石膜合成中用到的模板剂均为昂贵的 TPABr或 TPAOH,且从渗透分离数据看 ,它们都具有良好的分离选择性 ,但渗透率不高 ,如 H2 的渗透率在1 0 - 7mol/(m2·s·Pa)数量级 ,这就制约了膜的应用 ,因此 ,探讨具有高选择性和大渗透量的沸石膜的合成显得尤为重要 .本文直…     

Butane isomerization over platinum promoted sulfated zirconia catalysts

The isomerization of n-butane to i-butane has been studied at 11 bar in a microflow reactor over sulfated zirconia (SZ) and platinum containing sulfated zirconia (Pt-SZ) catalysts. In the presence of H₂ a significantly higher temperature is required for isomerization over SZ than in its absence. The rate over SZ is higher with n-butane containing 33 ppm butene as an impurity than with a feed that is pre-equilibrated over a Pt/SiO₂ catalyst to a much lower butene content. Over Pt-SZ the reaction rate is higher, because any butene consumed is rapidly regenerated; the conversion is perfectly stable in 83 h runs, selectivity to i-butane is 95%; i-pentane and propane are the main byproducts. The activation energy is 53 kJ mol⁻¹. Upon increasing the pressure of H₂ from 1.1 to 6.6 bar, the reaction rate was found to decrease in a perfectly reversible fashion. Kinetic analysis reveals that the reaction order is negative in H₂ (−1.1 to −1.3 depending on the temperature) and positive in n-butane (+ 1.3 to +1.6), indicating that the mechanism of this isomerization is intermolecular: butene is formed and reacts with adsorbed C₄-carbenium ions to adsorbed C₈ intermediates which isomerize and undergo β-fission to fragments with i-C₄ structure. This mechanism is confirmed over Pt-SZ by isotopic labelling experiments, though at much lower pressure, using double labelled ¹³CH₃---CH₂---CH₂---¹³CH₃. The primary reaction product consists of i-butane molecules, containing zero, one, two, three and four ¹³C atoms in a binomial distribution.     

Synthesis and crystal structures of (C8h8)Nd(C5H9C5H4) (THF)2 and [(C8H8)Gd(C5H9C4H4(THF)][(C8H8)GD(C5H9C5H4(THF)2]

LnCl₃ (Ln=Nd, Gd) reacts with C₅H₉C₅H₄Na (or K₂C₈H₈) in THF (C₅H₉C₅H₄ = cyclopentylcyclopentadienyl) in the ratio of 1 : to give (C₅H₉C₅H₄)LnCl₂(THF)_n (orC₈H₈)LnCl₂(THF)_n], which further reacts with K₂C₈H₈ (or C₅H₉C₅H₄Na) in THF to form the litle complexes. If Ln=Nd the complex (C₈H₈)Nd(C₅H₉C₅H₄)(THF)₂ (a) was obtained: when Ln=Gd the 1 : 1 complex [(C₈H₈)Gd(C_%H₉)(THF)][(C₈H₈)Gd(C₅H₉H₄)(THF)₂] (b) was obtained in crystalline form.

The crystal structure analysis shows that in (C₈H₈)Ln(C₅H₉C₅H₄)(THF)₂ (Ln=Nd or Gd), the Cyclopentylcyclopentadieny (η⁵), cyclooctatetraenyl (η⁸) and two oxygen atoms from THF are coordinated to Nd³⁺ (or Gd³⁺) with coordination number 10.

The centroid of the cyclopentadienyl ring (Cp′) in C₅H₉C₅H₄ group, cyclooctatetraenyl centroid (COTL) and two oxygens (THF) form a twisted tetrahedron around Nd³⁺ (or Gd³⁺). In (C₈H₈)Gd(C₅H₉C₅H₄)(THF), the cyclopentyl-cyclopentadienyl (η⁵), cyclooctatetraenyl (η⁸) and one oxygen atom are coordinated to Gd³⁺ with the coordination number of 9 and Cp′, COT and oxygen atom form a triangular plane around Gd³⁺, which is almost in the plane (dev. -0.0144 Å).     

Oxidative dehydrogenation of ethane to ethylene over NiO loaded on high surface area MgO

The oxidative dehydrogenation of ethane over NiO-loaded MgO with high surface area was carried out using a fixed-bed flow reactor at 600 °C under atmospheric pressure.

At 600 °C, the oxidative dehydrogenation of ethane (C₂H₆/O₂ = 1) without dilution with an inert gas resulted in C₂H₆ conversion of 68.8% and a high C₂H₄ selectivity of 52.8%, which corresponds to a C₂H₄ yield of 36.3%. In addition, the catalytic activity did not decrease for at least 10 h. X-ray photoelectron spectra of the catalysts after the reaction exhibited that the initial valence state of Ni²⁺ (NiO) was maintained during the oxidative dehydrogenation of ethane. However, when NiO-loaded MgO was reduced with H₂ prior to the reaction, C₂H₄ selectivity decreased to nearly zero and high CO and H₂ selectivities were observed with the C₂H₆ conversion of 50 %, indicating that partial oxidation of C₂H₆ proceeded. Therefore, it seems important to keep Ni species as an oxide phase on the support, and for this purpose, use of the high surface area of MgO is essential.     

The use of thermotropic liquid crystals in organometallic chemistry. Synthesis of new mercury, silver and gold complexes with 4,4′-disubstituted azob

Liquid crystalline 4-XC₆H₄N=NC₆H₄X-4′ [X = C₄H₉ (1a), C_1OH₂₁ (1b), OC₄H₉ (1c), OC₈H₁₇(1d)] can be easily prepared in high yields from the corresponding anilines. In order to study the influence of metals on the thermal properties of these materials, we have obtained adducts [AuCl ₃(4-C₄H₉OC₆H₄N=NC₆H₄OC₄H₉-4′)] (2) and [Ag(OC1O₃)L₂] [L = 4-XC₆H₄N=NC₆H₄X-4′; X = OC₄H, (3a), OC₈H₁₇ (3b)]. The silver adducts show themotropic behaviour. Mercuriation of dialkylazobenzenes 1a-b takes place with [Hg(OAc)₂] and LiCl to give [Hg(R)Cl] [R = C₆H₃(N=NC₆H₄X-4′)-2, X-5; X = C₄H₉ (bpap) (4a), C₁₀H₂₁ (dpap) (4b)] while dialkoxyazobenzenes 1c–d require [Hg (OOCCF₃)₂] to obtain [Hg(R)Cl] [R = C₆H₃(N---NC₆H₄X-4′)-2, X-5; X = OC₄H₉ (bxpap) (4c), OC ₈H₁₇ (4d)]. 4a-c react with NaI to give [HgR₂] [R= bpap (5a), dpap (5b), bxpap (5c), oxpap (5d)l. Both chloroaryl-, 4a and 4c, and diaryl-mercurials, 5a and 5c, act readily as transmetailating agents towards [Me₄N] [AuCl₄] in the presence of [Me₄N]Cl to give [Au(η²-R)Cl₂] [R = bpap (6a), bxpap (6b)]. After reaction of [AuCl ₃(tht)] (tht = tetrahydrothiophene) with [Me₄N]Cl and 4b (1:2:1), [Me₄N][Au(dpap)Cl₃] (7) can be isolated. C---H activati bxpap (8b)]. None of the complexes 4–8 shows mesomorphic behaviour.     

Velocity map imaging of the photolysis of n-C4H9Br in UV region

Using velocity map ion imaging technique, the photodissociation of n-C₄H₉Br in the wavelength range 231–267 nm was studied. The results and our ab initio calculations indicated that the absorption of n-C₄H₉Br in the investigated region originated from the excitations to the lowest three repulsive states, as assigned as 1A″, 2A′ and 3A′ in C_s symmetry. Dissociations occurred on the PES surfaces of the three states, terminating in C₄H₉+Br (²P_3/2) or C₄H₉ + Br^* (²P_1/2) as two channels, and being impacted by an avoided crossing between the PES surfaces of the 2A′ and 3A′ states. The transition dipole to the 1A″ state was perpendicular to the symmetry plane, so perpendicular to the C–Br bond. The transitions to the 3A′ state was polarized parallel to the symmetry plane, and also parallel to the C–Br bond. While the transition dipole to the 2A′ state was in the symmetry plane, but formed an angle of about 53.1° with the C–Br bond. We have also determined the avoided crossing probabilities, which affected the relative fractions of the individual pathways, for the photolysis of n-C₄H₉Br near 234 nm and 267 nm.     

Two-dimensional cobalt metal-organic frameworks for efficient C3H6/CH4 and C3H8/CH4 hydrocarbon separation

A Co-based two-dimensional (2D) microporous metal-organic frameworks (UPC-32) with narrow distance between layers and layers (3.8 Å) exhibits high selectivity of C₃H₆/CH₄ (31.46) and C₃H₈/CH₄ (28.04) at 298 K and 1 bar. It is the first 2D Co-MOF that showed selective separation of C3 hydrocarbon from CH₄.     

Thermogravimetry of some uranium 8-hydroxyquinolates

The thermogravimetric behaviour of UO₂(C₉H₆NO)₂.C₉H₆NOH and [UO₂(C₉H₆NO)₂]₂.C₉H₆NOH prepared by precipitation from homogeneous solution with 8-acetoxy-quinoline has been found to closely resemble that of UO₂(C₉H₆NO)₂.C₉H₆NOH prepared by direct precipitation of uranium^VI with 8-hydroxyquinoline.     

Synthesis, electrochemistry and structural characterization of luminescent rhenium(I) monoynyl complexes and their homo- and hetero-metallic binuclear complexes

A series of luminescent rhenium(I) monoynyl complexes, [Re(N---N)(CO)₃(CC---R)] (N---N=bpy, ^tBu₂bpy; R=C₆H₅, C₆H₄---Cl-4, C₆H₄---OCH₃-4, C₆H₄---C₈H₁₇-4, C₆H₄---C₆H₅, C₈H₁₇, C₄H₃S, C₄H₂S---C₄H₃S, C₅H₄N), together with their homo- and hetero-metallic binuclear complexes, {Re(N---N)(CO)₃(CC---C₅H₄N)[M]} (N---N=bpy, ^tBu₂bpy; [M]=[Re{(CF₃)₂-bpy}(CO)₃]ClO₄, [Re(NO₂-phen)(CO)₃]ClO₄, W(CO)₅) have been synthesized and their electrochemical and photoluminescence behaviors determined. The structural characterization and electronic structures of selected complexes have also been studied. The luminescence origin of the rhenium(I) alkynyl complexes has been assigned as derived states of a [dπ(Re)→π*(N---N)] metal-to-ligand charge transfer (MLCT) origin mixed with a [π(CCR)→π*(N---N)] ligand-to-ligand charge transfer (LLCT) character. The assignments are further supported by extended Hückel molecular orbital (EHMO) calculations, which show that the LUMO mainly consists of π*(N---N) character while the HOMO is dominated by the antibonding character of the Re---CCR moiety resulted from the overlap of the dπ(Re) and π(CCR) orbitals.