Metal–Covalent Organic Frameworks (MCOFs): A Bridge Between Metal–Organic Frameworks and Covalent Organic Frameworks

Many sophisticated chemical and physical properties of porous materials strongly rely on the presence of the metal ions within the structures. Whereas homogeneous distribution of metals is conveniently realized in metal–organic frameworks (MOFs), the limited stability potentially restricts their practical implementation. From that perspective, the development of metal–covalent organic frameworks (MCOFs) may address these shortcomings by incorporating active metal species atop highly stable COF backbones. This Minireview highlights examples of MCOFs that tackle important issues from their design, synthesis, characterization to cutting-edge applications.     

Gas–Solid Heterogeneous Postsynthetic Modification of Imine-Based Covalent Organic Frameworks

The copper-catalyzed azide–alkyne cycloaddition (CuAAC) click reaction is among the most extensively used strategies for the post-polymerization modification of COFs. This work shows a new procedure for the postsynthetic functionalization of imine-based COFs by using a heterogeneous solid–gas reaction between alkyne-functionalized COFs and azides in the absence of a copper catalyst. This new alternative represents a step forward towards a greener postsynthetic modification of COFs opening a high potential for the development of new applications.     

One-Pot Synthesis of Heterobimetallic Metal–Organic Frameworks (MOFs) for Multifunctional Catalysis

A one-pot synthesis of bimetallic metal–organic frameworks (Co/Fe-MOFs) was achieved by treating stoichiometric amounts of Fe and Co salts with 2-aminoterephthalic acid (NH₂-BDC). Monometallic Fe (catalyst A) and Co (catalyst F) were also prepared along with mixed-metal Fe/Co catalysts (B–E) by changing the Fe/Co ratio. For mixed-metal catalysts (B–E) SEM energy-dispersive X-ray (EDX) analysis confirmed the incorporation of both Fe and Co in the catalysts. However, a spindle-shaped morphology, typically known for the Fe-MIL-88B structure and confirmed by PXRD analysis, was only observed for catalysts A–D. To test the catalytic potential of mixed-metal MOFs, reduction of nitroarenes was selected as a benchmark reaction. Incorporation of Co enhanced the activity of the catalysts compared with the parent NH₂-BDC-Fe catalyst. These MOFs were also tested as electrocatalysts for the oxygen evolution reaction (OER) and the best activity was exhibited by mixed-metal Fe/Co-MOF (Fe/Co batch ratio=1). The catalyst provided a current density of 10 mA cm⁻² at 410 mV overpotential, which is comparable to the benchmark OER catalyst (i.e., RuO₂). Moreover, it showed long-term stability in 1 m KOH. In a third catalytic test, dehydrogenation of sodium borohydride showed high activity (turnover frequency=87 min⁻¹) and hydrogen generation rate (67 L min⁻¹ g⁻¹ catalyst). This is the first example of the synthesis of bimetallic MOFs as multifunctional catalysts particularly for catalytic reduction of nitroarenes and dehydrogenation reactions.     

One-Dimensional Covalent Organic Frameworks for the 2e− Oxygen Reduction Reaction

Two-dimensional covalent organic frameworks (2D COFs) are often employed for electrocatalytic systems because of their structural diversity. However, the efficiency of atom utilization is still in need of improvement, because the catalytic centers are located in the basal layers and it is difficult for the electrolytes to access them. Herein, we demonstrate the use of 1D COFs for the 2e⁻ oxygen reduction reaction (ORR). The use of different four-connectivity blocks resulted in the prepared 1D COFs displaying good crystallinity, high surface areas, and excellent chemical stability. The more exposed catalytic sites resulted in the 1D COFs showing large electrochemically active surface areas, 4.8-fold of that of a control 2D COF, and thus enabled catalysis of the ORR with a higher H₂O₂ selectivity of 85.8 % and activity, with a TOF value of 0.051 s⁻¹ at 0.2 V, than a 2D COF (72.9 % and 0.032 s⁻¹). This work paves the way for the development of COFs with low dimensions for electrocatalysis.     

Rabies Virus-Inspired Metal–Organic Frameworks (MOFs) for Targeted Imaging and Chemotherapy of Glioma

The blood–brain barrier (BBB) restricts access to the brain of more than 98 % of therapeutic agents and is largely responsible for treatment failure of glioblastoma multiforme (GBM). Therefore, it is of great importance to develop a safe and efficient strategy for more effective drug delivery across the BBB into the brain. Inspired by the extraordinary capability of rabies virus (RABV) to enter the central nervous system, we report the development and evaluation of the metal–organic framework-based nanocarrier MILB@LR, which closely mimicked both the bullet-shape structure and surface functions of natural RABV. MILB@LR benefited from a more comprehensive RABV-mimic strategy than mimicking individual features of RABV and exhibited significantly enhanced BBB penetration and brain tumor targeting. MILB@LR also displayed superior inhibition of tumor growth when loaded with oxaliplatin. The results demonstrated that MILB@LR may be valuable for GBM targeting and treatment.     

Post-synthetic Modification of Covalent Organic Frameworks through in situ Polymerization of Aniline for Enhanced Capacitive Energy Storage

Covalent organic frameworks (COFs) having layered architecture with open nanochannels and high specific surface area are promising candidates for energy storage. However, the low electrical conductivity of two-dimensional COFs often limits their scope in energy storage applications. The conductivity of COFs can be enhanced through post-synthetic modification with conducting polymers. Herein, we developed polyaniline (PANI) modified triazine-based COFs via in situ polymerization of aniline within the porous frameworks. The composite materials showed high conductivity of 1.4–1.9×10⁻² S cm⁻¹ at room temperature with a 20-fold enhancement of the specific capacitance than the pristine frameworks. The fabricated supercapacitor exhibited a high energy density of 24.4 W h kg⁻¹ and a power density of 200 W kg⁻¹ at 0.5 A g⁻¹ current density. Moreover, the device fabricated using the conducting polymer-triazine COF composite could light up a green light-emitting diode for 1 min after being charged for 10 s.     

Covalent Organic Frameworks with trans-Dimensionally Vinylene-linked π-Conjugated Motifs

Vinylene-linked covalent organic frameworks(COFs) are a class of promising porous organic materials that feature fully π-conjugated structures, high crystallinity, permanent porosity, ultrahigh chemical stability, and extraordinary optoelectronic properties. Over the past 5 years, this kind of material has been witnessed rapid development either in chemical synthesis or in potential applications. In this review, we summarize the chemistry to synthesize vinylene-linked COFs, especially the synthetic strategies involving activation of aryl methyl groups for condensation reaction. We then scrutinize the state-of-the-art development in properties and functions of this kind of COFs. Our own opinions on the further development of the vinylene-linked COFs are also presented for discussion.     

Construction of Flexible-on-Rigid Hybrid-Phase Metal–Organic Frameworks for Controllable Multi-Drug Delivery

Multi-component MOFs contain multiple sets of unique and hierarchical pores, with different functions for different applications, distributed in their inter-linked domains. Herein, we report the construction of a class of precisely aligned flexible-on-rigid hybrid-phase MOFs with a unique rods-on-octahedron morphology. We demonstrated that hybrid-phase MOFs can be constructed based on two prerequisites: the partially matched topology at the interface of the two frameworks, and the structural flexibility of MOFs with acs topology, which can compensate for the differences in lattice parameters. Furthermore, we achieved domain selective loading of multiple guest molecules into the hybrid-phase MOF, as observed by scanning transmission electron microscopy–energy-dispersive X-ray spectrometry elemental mapping. Most importantly, we successfully applied the constructed hybrid-phase MOF to develop a dual-drug delivery system with controllable loading ratio and release kinetics.     

Dimensional Reduction of Metal–Organic Frameworks for Enhanced Cryopreservation of Red Blood Cells

To increase the red blood cell (RBC) cryopreservation efficiency by metal–organic frameworks (MOFs), a dimensional reduction approach has been proposed. Namely, 3D MOF nanoparticles are progressively reduced to 2D ultra-thin metal–organic layers (MOLs). We found that 2D MOLs are beneficial for enhanced interactions of the interfacial hydrogen-bonded water network and increased utilization of inner ordered structures, due to the higher surface-to-volume ratio. Specifically, a series of hafnium (Hf)-based 2D MOLs with different thicknesses (monolayer to stacked multilayers) and densities of hydrogen bonding sites have been synthesized. Both ice recrystallization inhibition activity (IRI) and RBCs cryopreservation assay confirm the pronounced better IRI activity and excellent cell recovery efficiency (up to ≈63 % at a very low concentration of 0.7 mg mL⁻¹) of thin-layered Hf-MOLs compared to their 3D counterparts, thereby verifying the dimensional reduction strategy to improved cryoprotectant behaviors.     

Rational Stepwise Construction of Different Heterometallic–Organic Frameworks (HMOFs) for Highly Efficient CO2 Conversion

The coordination preference of different metal ions and ligands have an immense influence on the constructions of functional MOF materials. In this work, two new monometallic complexes, namely [Ag(HL)(bipy)_0.5] ( 1 ) and {[Tb(L)_1.5(H₂O)] ⋅ 4 H₂O}_n ( 2 ) (bipy=4,4-bipyridine), have been synthesized successfully by employing a bifunctional 2-(imidazol-1-yl)terephthalic acid (H₂L) ligand. After that, two new different heterometallic–organic frameworks (HMOFs), namely {[TbAg(L)₂(H₂O)₃] ⋅ H₂O}_n ( 3 ) and [TbAg(L)₂(H₂O)]_n ( 4 ), were obtained from complexes 1 and 2 as the precursors based on a rational stepwise construction strategy and the theory of hard and soft acids and bases (HSAB principle), respectively. The HMOFs bearing dual metallic catalytic sites (Tb and Ag) can be used as heterogeneous catalysts without losing performance for the chemical fixation of CO₂ with epoxides including the sterically hindered epoxides, demonstrating some of the highest reported catalytic activity values. This work may provide a new synthetic route toward tailoring new HMOFs with excellent catalytic activity.     

Multi-shelled Hollow Metal–Organic Frameworks

Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi-shelled hollow chromium (III) terephthalate MOFs (MIL-101) with single-crystalline shells through step-by-step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi-shelled hollow MIL-101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi-shelled hollow structures and the further expansion of their applications.     

Metal-Mediated Directional Capping of Rod-Packing Metal–Organic Frameworks

Two new rod-packing metal–organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn²⁺ with a stronger Lewis acidic Co²⁺, leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.     

Modular Customization and Regulation of Metal–Organic Frameworks for Efficient Membrane Separations

Metal–organic frameworks (MOFs) are considered ideal membrane candidates for energy-efficient separations. However, the MOF membrane amount to date is only a drop in the bucket compared to the material collections. The fabrication of an arbitrary MOF membrane exhibiting inherent separation capacity of the material remains a long-standing challenge. Herein, we report a MOF modular customization strategy by employing four MOFs with diverse structures and physicochemical properties and achieving innovative defect-free membranes for efficient separation validation. Each membrane fully displays the separation potential according to the MOF pore/channel microenvironment, and consequently, an intriguing H₂/CO₂ separation performance sequence is achieved (separation factor of 1656–5.4, H₂ permeance of 964–2745 gas permeation unit). Taking advantage of this strategy, separation performance can be manipulated by a non-destructive modification separately towards the MOF module. This work establishes a universal full-chain demonstration for membrane fabrication-separation validation-microstructure modification and opens an avenue for exclusive customization of membranes for important separations.     

Alkali Phosphonate Metal–Organic Frameworks

A new family of porous metal–organic frameworks (MOFs), namely alkali phosphonate MOFs, is reported. [Na₂Cu(H₄TPPA)] ⋅ (NH₂(CH₃)₂)₂ ( GTUB-1 ) was synthesized using the tetratopic 5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin ( H₈-TPPA ) linker with planar X-shaped geometrical core. GTUB-1 is composed of rectangular void channels with BET surface area of 697 m² g⁻¹. GTUB-1 exhibits exceptional thermal stability. The toxicity analysis of the ( H₈-TPPA ) linker indicates that it is well tolerated by an intestinal cell line, suggesting its suitability for creating phosphonate MOFs for biological applications.     

Site Engineering of Covalent Organic Frameworks for Regulating Peroxymonosulfate Activation to Generate Singlet Oxygen with 100 % Selectivity

Singlet oxygen (¹O₂) is an excellent reactive oxygen species (ROSs) for the selective conversion of organic matter, especially in advanced oxidation processes (AOPs). However, due to the huge dilemma in synthesizing single-site type catalysts, the control and regulation of ¹O₂ generation in AOPs is still challenging and the underlying mechanism remains largely obscure. Here, taking advantage of the well-defined and flexibly tunable sites of covalent organic frameworks (COFs), we report the first achievement in precisely regulating ROSs generation in peroxymonosulfate (PMS)-based AOPs by site engineering of COFs. Remarkably, COFs with bipyridine units (BPY-COFs) facilitate PMS activation via a nonradical pathway with 100 % ¹O₂, whereas biphenyl-based COFs (BPD-COFs) with almost identical structures activate PMS to produce radicals (⋅OH and SO₄^.−). The BPY-COFs/PMS system delivers boosted performance for selective degradation of target pollutants from water, which is ca. 9.4 times that of its BPD-COFs counterpart, surpassing most reported PMS-based AOPs systems. Mechanism analysis indicated that highly electronegative pyridine-N atoms on BPY-COFs provide extra sites to adsorb the terminal H atoms of PMS, resulting in simultaneous adsorption of O and H atoms of PMS on one pyridine ring, which facilitates the cleavage of its S−O bond to generate ¹O₂.     

Metal–Organic Frameworks as Electrocatalysts

Transition metal complexes are well-known homogeneous electrocatalysts. In this regard, metal–organic frameworks (MOFs) can be considered as an ensemble of transition metal complexes ordered in a periodic arrangement. In addition, MOFs have several additional positive structural features that make them suitable for electrocatalysis, including large surface area, high porosity, and high content of accessible transition metal with exchangeable coordination positions. The present review describes the current state in the use of MOFs as electrocatalysts, both as host of electroactive guests and their direct electrocatalytic activity, particularly in the case of bimetallic MOFs. The field of MOF-derived materials is purposely not covered, focusing on the direct use of MOFs or its composites as electrocatalysts. Special attention has been paid to present strategies to overcome their poor electrical conductivity and limited stability.     

High-Z Metal–Organic Frameworks for X-ray Radiation-Based Cancer Theranostics

X-ray radiation is commonly employed in clinical practice for diagnostic and therapeutic applications. Over the past decade, developments in nanotechnology have led to the use of high-Z elements as the basis for innovative new treatment platforms that enhance the clinical efficacy of X-ray radiation. Nanoscale metal–frameworks (nMOFs) are coordination networks containing organic ligands that have attracted attention as therapeutic platforms in oncology and other areas of medicine. In cancer therapy, X-ray activated, high-Z nMOFs have demonstrated potential as radiosensitizers that increase local radiation dose deposition and generation of reactive oxygen species (ROS). This minireview summarizes current research on high-Z nMOFs in cancer theranostics and discusses factors that may influence future clinical application.     

Concentration-Dependent Seeding as a Strategy for Fabrication of Densely Packed Surface-Mounted Metal–Organic Frameworks (SURMOF) Layers

The layer-by-layer (LbL) method is a well-established method for the growth of surface-attached metal–organic frameworks (SURMOFs). Various experimental parameters, such as surface functionalization or temperature, have been identified as essential in the past. In this study, inspired by these recent insights regarding the LbL SURMOF growth mechanism, the impact of reactant solutions concentration on LbL growth of the Cu₂(F₄bdc)₂(dabco) SURMOF (F₄bdc²⁻=tetrafluorobenzene-1,4-dicarboxylate and dabco=1,4-diazabicyclo-[2.2.2]octane) in situ by using quartz-crystal microbalance and ex situ with a combination of spectroscopic, diffraction and microscopy techniques was investigated. It was found that number, size, and morphology of MOF crystallites are strongly influenced by the reagent concentration. By adjusting the interplay of nucleation and growth, we were able to produce densely packed, yet thin films, which are highly desired for a variety of SURMOF applications.     

Shaping Microcrystals of Metal–Organic Frameworks by Reaction–Diffusion

When components of a metal–organic framework (MOF) and a crystal growth modulator diffuse through a gel medium, they can form arrays of regularly-spaced precipitation bands containing MOF crystals of different morphologies. With time, slow variations in the local concentrations of the growth modulator cause the crystals to change their shapes, ultimately resulting in unusual concave microcrystallites not available via solution-based methods. The reaction–diffusion and periodic precipitation phenomena 1) extend to various types of MOFs and also MOPs (metal–organic polyhedra), and 2) can be multiplexed to realize within one gel multiple growth conditions, in effect leading to various crystalline phases or polycrystalline formations.