Influences of ASE on the performances of Q-switched ytterbium-doped fiber lasers

The output characteristics of actively Q-switched ytterbium-doped fiber lasers (YDFL) are investigated in this paper. Our experimental results show that, the combined effect between the short switching time and the gain transient property of doped fiber causes the initial amplified spontaneous emission (ASE) power fluctuation, forming the multi-peak structure in the output pulse for either ring or linear cavity Q-switched YDFL. The pulse buildup time decreases with the rising of the pump. Moreover, since the broad-band ASE generated in the YDF is very high, it may saturate the doped fiber once the switch has been opened, making it difficult to achieve Q-switched laser oscillation for both fiber lasers. By using ASE filter to suppress the initial ASE, the gain supplied by the YDF can be greatly enhanced, which can not only decrease the threshold, but also greatly decrease the duration, and enhance the peak power of the Q-switched laser pulse as well. By using such an ASE filter, the Q-switched laser pulse with the peak power of 40.7 W and the duration of 30 ns has been achieved for the linear cavity YDFL pumped with 160 mW.     

Tandem-pumped 1120-nm actively Q-switched fiber laser

We report on a tandem-pumped actively Q-switched fiber laser system emitting at 1120 nm.Parasitic oscillation is challenging in Yb-doped Q-switched 1120-nm fiber laser,which is suppressed by pumping with a fiber laser at 1018 nm.At least four times improvement in output peak power is demonstrated in a single laser setup with 1018-nm fiber laser pumping instead of 976-nm laser diode pumping.This is,to the best of our knowledge,the first demonstration of a tandem-pumped Q-switched fiber laser.     

Stable passively Q-switched operation of Tm3+ doped silica fiber laser by anti-resonant Fabry-Perot saturable absorber

We demonstrate a diode-pumped passively Q-switched Tm-doped double-cladding silica fiber laser operating at wavelength of 1960 nm using an anti-resonant Fabry-Perot saturable absorber as passive modulation element. To determine a relatively preferable fiber length for stable cw Q-switched operation, three active fiber simples with the length of 1.1, 5.3, and 7.0 m were employed respectively in our experiments. With 1.1 m gain fiber, we generated Q-switched pulses with a pulse width of 245 ns and an average power of up to 2.2 W at a repetition rate of 620 kHz. For the longer two fiber samples, Q-switched operation with longer pulse duration, Q-switched mode-locking and cw mode-locking were observed, respectively.     

All-fiber actively Q-switched fiber laser tuned by a pair of temperature controlled fiber Bragg gratings

We report an all-fiber actively Q-switched erbium-doped fiber laser, where the linear laser cavity mirrors are composed of two fiber Bragg gratings (FBGs). The laser oscillation wavelength could be tuned by this pair of temperature controlled FBGs. The Q-switching is achieved by an all-fiber phase modulation device. Using this system, we could obtain stable Q-switched laser pulses output, which could be optimized by tuning the reflection wavelengths of the two FBGs to be adjacent to each other. Instead of being modulated by the FBG filter in high-speed oscillation, this fiber laser system is operating in the Q-switched regime using an all-fiber phase modulator, producing a more stable laser output spectrum.     

Single-walled carbon nanotubes on side polished fiber as a universal saturable absorber for various laser output states

We demonstrated four different laser operational states in the same passive fiber ring laser cavity by controlling solely the polarization state in a saturable absorber. The demonstrated laser operational states were continuous wave, mode-locking, Q-switching, and Q-switched mode-locking. The saturable absorber was fabricated by spin-coating a single-walled carbon nanotubes (SWCNT)/polymer composite on a side polished fiber providing enhanced nonlinear interaction with the SWCNT. The wide tuning range of the saturable absorber allows the simple means to generate different forms of laser output from a single laser cavity.     

Resonantly pumped 1.645 μm high repetition rate Er:YAG laser Q-switched by a graphene as a saturable absorber

A fiber laser resonantly pumped 1.645 μm passively Q-switched Er:YAG laser is reported. Graphene on a silicon carbide was used as the saturable absorber for the Q-switching. The pulse energy of the 1.645 μm Q-switched Er:YAG laser was 7.05 μJ, with a pulse repetition rate of 35.6 kHz and an average output power of 251 mW.     

Multi-wavelength Q-switched erbium doped fiber laser with a short carbon nanotube based saturable absorber

We demonstrate an all-fiber passively multi-wavelength Q-switched Erbium doped fiber laser (EDFL) based on a short Carbon Nanotube based saturable absorber. With the saturable absorber connected in a longer standing wave based fiber laser cavity, stable single, dual, and multiple wavelength Q-switched low threshold EDFL are achieved. Experimental results show that the output pulse of the filtered single wavelength has the same repetition rate as that of the multi-wavelength output while its average output power is lower than that of the multi-wavelength output.     

High-power all-fiber passively Q-switched laser using a doped fiber as a saturable absorber: numerical simulations

We report a design for a power-scalable all-fiber passively Q-switched laser that uses a large mode area Yb-doped fiber as a gain medium adiabatically tapered to an unpumped single-mode Yb-doped fiber, which serves as a saturable absorber. Through the use of a comprehensive numerical simulator, we demonstrate a passively Q-switched 1030 nm pulsed laser with 14 ns pulse duration and 0.5 mJ pulse energy operating at 200 kHz repetition rate. The proposed configuration has a potential for orders of magnitude of improvement in both the pulse energies and durations compared to the previously reported result. The key mechanism for this improvement relates to the ratio of the core areas between the pumped inverted large mode area gain fiber and the unpumped doped single-mode fiber.     

Q-Switched Fiber Laser with a Hafnium-Bismuth-Erbium Codoped Fiber as Gain Medium and Sb2Te3 as Saturable Absorber

Journal of Russian Laser Research - We successfully demonstrate Q-switched fiber laser with a 20 cm long Hafnium-Bismuth-Erbium codoped fiber (HBEDF) as an active medium in conjunction with...     

Graphene-based passively Q-switched dual-wavelength erbium-doped fiber laser

We demonstrate a compact Q-switched dual-wavelength erbium-doped fiber (EDF) laser based on graphene as a saturable absorber (SA). By optically driven deposition of graphene on a fiber core, the SA is constructed and inserted into a diode-pumped EDF laser cavity. Also benefiting from the strong third-order optical nonlinearity of graphene to suppress the mode competition of EDF, a stable dual-wavelength Q-switching operation has been achieved using a two-reflection peak fiber Bragg grating as the external cavity mirror. The Q-switched EDF laser has a low pump threshold of 6.5 mW at 974 nm and a wide range of pulse-repetition rate from 3.3 to 65.9 kHz. The pulse duration and the pulse energy have been characterized. This is, to the best of our knowledge, the first demonstration of a graphene-based Q-switched laser.     

A compact graphene Q-switched erbium-doped fiber laser using optical circulator and tunable fiber Bragg grating

We demonstrate a passively Q-switched tunable erbium-doped fiber laser(EDFL)based on graphene as a saturable absorber(SA).A three-port optical circulator(OC)and a strain-induced tunable fiber Bragg grating(TFBG)are used as the two end mirrors in an all-fiber linear cavity.The Q-switched EDFL has a low pump threshold of 23.8 mW.The pulse repetition rate of the fiber laser can be widely changed from 9.3 kHz to 69.7 kHz by increasing the pump power from23.8 mW to 219.9 mW.The minimum pulse duration is 1.7μs and the highest pulse energy is 25.4 nJ.The emission wavelength of the laser can be tuned from 1560.43 nm to 1566.27 nm by changing the central wavelength of the straininduced TFBG.     

Controllable dissipative soliton and Q-switched pulse emission in a normal dispersion fiber laser using SESAM and cavity loss tuning mechanism

We report on the controllable generation of the dissipative soliton and the Q-switched pulse in a normal dispersion fiber ring laser. The hybrid saturable absorber is used to obtain the dissipative soliton or the Q-switched pulse by slightly adjusting the polarization controller. Based on the experimental results and theoretical analysis, the controllable dissipative soliton and Q-switched pulse emission can be induced by the cavity loss tuning mechanism of the fiber laser.     

Development of a high-pulse-energy Q-switched Tm-doped double-clad fluoride fiber laser and its application to the pumping of mid-IR lasers

A diode-pumped Q-switched Tm-doped double-clad fluoride fiber laser is reported providing up to 90 microJ pulse energy (160 ns, 100 kHz, i.e., 9 W of average power). The dependence of the fiber laser's repetition rate on pump power and modulator repetition rate was investigated. By amplification even higher pulse energies of 410 microJ could be generated. In a second stage of the setup the Q-switched fiber laser serves as a pump for a gain-switched tunable Cr2+:ZnSe laser. The pulse energies reported are to the author's knowledge the highest generated by Tm-doped fluoride fiber lasers or amplifiers today.     

基于微纳光纤-单壁碳纳米管可饱和吸收体的被动调Q掺镱光纤激光器

为实现具有高脉冲能量的调Q脉冲激光输出,利用微纳光纤-单壁碳纳米管复合的方法制备可饱和吸收体,并对基于该类型可饱和吸收体器件的被动调Q掺镱光纤激光器进行研究。采用拉伸法将普通单模石英光纤拉制成微纳光纤,将其与单壁碳纳米管溶液复合,进一步制备成全光纤集成型器件。将该器件置于环形腔掺镱光纤激光器中,利用976 nm半导体激光器作为抽运源。当抽运功率为53 mW时,实现了调Q脉冲激光输出,激光中心波长为1 039 nm。进一步提升抽运功率至76 mW,可获得脉冲宽度为3.1μs、重复频率为25.5 kHz、单脉冲能量为941nJ的调Q脉冲激光输出。研究表明,利用微纳光纤制备的可饱和吸收体器件具有较高的损伤阈值,可用于实现高脉冲能量的激光输出。     

Characteristics of a Q-switched multicore photonic crystal fiber laser with a very large mode field area

We model and characterize the behavior of a Q-switched fiber laser. The fiber is a doped multicore photonic crystal fiber having six cores in a ring-type geometry. The fiber laser is Q-switched using an intracavity acousto-optic modulator. Using a mode filtering technique in the far field, a mode very close to the fundamental in-phase supermode is obtained with a mode field area of 4200 microm(2) and a divergence of 9 mrad. Pulses with energies of up to 2.2 mJ and durations of 26 ns (limited by end facet damage) at a repetition rate of 10 kHz are obtained.     

基于少模光纤被动调Q柱矢量光光纤激光器

通过单模光纤和少模光纤熔融拉锥耦合的方法制备出模式转换器,而后将一层多壁的碳纳米管薄膜作为可饱和吸收体覆盖到拉锥光纤的锥区,形成一种可饱和吸收体柱矢量光器件.结合调Q光纤激光器和模式转换器件的优势,可以简单高效地产生脉冲柱矢量光束,并得到具有峰值功率高、模式纯度高等特点的脉冲高阶模式激光输出.通过实验实现了中心波长为1560nm、最大单脉冲能量和最大峰值功率分别为116nJ和57mW的稳定调Q脉冲输出.通过调节光路中的偏振控制器,可以分别实现径向和角向偏振的调Q脉冲激光的输出.     

Passive Q-switching of a fiber laser using a side-polished birefringent fiber with index matching gel spread on the flat side

We experimentally demonstrate the use of a side-polished birefringent fiber with index matching gel spread on the flat side as a passive Q-switch for the implementation of an all-fiberized, erbium-doped fiber (EDF)-based Q-switched laser. It is shown that Q-switched pulses with a ~2.5-μs temporal width are readily achievable from an EDF ring cavity using the side-polished birefringent fiber-based Q-switch. The tuning capability of the pulse width and the repetition rate by changing the pump power is also investigated.     

Radially polarized and passively Q-switched fiber laser

We report, for the first time to our knowledge, a radially polarized and passively Q-switched Yb-doped fiber laser. By using a Cr(4+):YAG crystal as a saturable absorber and a photonic crystal grating as a polarization mirror, a radially polarized pulse is produced, which has 202 W of peak power, 75 ns duration, and ~92% polarization purity at a 56.6 kHz repetition rate. The Q-switched pulse with radial polarization from the fiber laser would facilitate numerous applications.     

Characteristic of pulsed fiber laser induced by switching time

Laser-diode pumped Q-switched ytterbium-doped switching time of acousto-optic modulator （AOM） fiber laser is studied experimentally by controlling the The characteristics of Q-switched pulses with different rise time of AOM regulated by the laser beam size along the window of AOM are presented. Meanwhile, the behaviors of Q-switched pulses are achieved by regulating the switching time of AOM. The singlerepetition-rate and half-repetition-rate phenomena are described and discussed. The experimental results confirm that the fiber laser with lower level inversion population can be more easily operated for half- repetition-rate generation.     

氧化石墨烯被动调Q掺铒光纤激光器

报道了基于氧化石墨烯的被动调Q掺铒光纤激光器。激光器采用环形腔结构,调Q器件为自制的氧化石墨烯可饱和吸收镜。泵浦功率在81~505 mW范围内时,得到了重复频率68~124 kHz的稳定的调Q脉冲输出,脉宽为0.47~1.60 s。由于泵浦功率限制,激光器最大输出功率为10 mW, 相应单脉冲能量为80.6 nJ。此种基于氧化石墨烯可饱和吸收体的被动调Q光纤激光器体积小、成本低廉、结构简单、稳定性高、光束质量高,具有广阔的应用前景。