Equilibrium and kinetics of calcium–uranyl–carbonate adsorption on silica nanoparticles

Solvent extraction studies on the purification of uranium from zirconium rich sodium diuranate (SDU) feed was carried out using n-tri butyl phosphate (TBP) as extractant and n-decanol as phase modifier. The presence of Zr in SDU leached solution leads to the formation of third phase during liquid–liquid extraction of uranium which was successfully prevented by addition of n-decanol in 30% (v/v) TBP/n-dodecane mixture. A seven stage counter current extraction of SDU feed solution followed by five stage stripping were carried out using optimum concentration of phase modifier 15% n-decanol-30% TBP in n-dodecane as solvent. Based on the findings a process flow-sheet has been developed for the purification of SDU to nuclear grade ammonium diuranate.     

Kinetics and mechanism of Am(III) extraction with TODGA

In the present paper, N,N,N’,N’-tetraoctyl diglycolamide (TODGA) as the extractant and n-dodecane as the diluent, the extraction kinetics behavior of Am(III) in TODGA/n-dodecane–HNO₃ system were studied, including stirring speed, the interfacial area, extractant concentration in n-dodecane, extracted ions concentration, acidity of aqueous phase and temperature. The results show that: the extraction process is controlled by diffusion mode under 130 rpm of stirring speed and by chemical reaction mode above 150 rpm. The extraction rate equation and the apparent extraction rate constant of Am(III) by TODGA/n-dodecane in 170 rpm and at 25 °C are followed as: $$ \begin{aligned} r_{0} = \left. {\frac{{{\text{d}}[{\text{M}}]_{{{\text{org}} .}} }}{{{\text{d}}{{t}}}}} \right|_{t = 0} & = k\,\frac{S}{V}\left[ {\text{Am}} \right]_{{{\text{aq}} . ,0}}^{0.94} \left[ {{\text{HNO}}_{3} } \right]_{{{\text{aq}} . ,0}}^{1.05} \left[ {\text{TODGA}} \right]_{{{\text{org}} . ,0}}^{1.19} \\ & \quad k = \left( {24.17 \pm 3.43} \right) \times 10^{ - 3} \,{\text{mol}}^{ - 2.18} \,L^{2.18} \,{ \hbox{min} }^{ - 1} \,{\text{cm}},\;E_{\text{a}} \left( {{\text{Am}}\left( {\text{III}} \right)} \right) = 25.94 \pm 0.98\;{\text{kJ/mol}} .\\ \end{aligned} $$      

Studies on the separation of 90Y from 90Sr by solvent extraction and supported liquid membrane using TODGA: role of organic diluent

Solvent extraction and supported liquid membrane transport studies on Y(III) and Sr(II) were carried out using both nitric as well as hydrochloric acid feed conditions using N,N,N′,N′-tetra-octyldiglycolamide (TODGA) in several organic diluents. The solvent extraction studies indicated extremely large separation factor (SF) values with chloroform, carbon tetrachloride, 1-decanol and hexone when 6 M HNO₃ was used as the feed. On the other hand, the SF values were 1–2 orders of magnitude lower when the nitric acid concentration was 3 M HNO₃. Significantly large SF values were also obtained from 6 M HCl when xylene, carbon tetrachloride, n-dodecane and hexone were used as the diluent. Though mass transfer was not very promising in the supported liquid membrane studies with most of the diluent systems, quantitative Y(III) transport was observed with 0.1 M TODGA in xylene with negligible Sr(II) transport suggesting possibility of obtaining carrier free ⁹⁰Y. The purity of the radiotracer was checked by half-life method.     

Speciation of 30 % tri-n-butyl phosphate solvent during extraction of nitric acid

Several solutions of 30 % TBP/n-dodecane were equilibrated with different concentrations of aqueous nitric acid solutions at 298.15 K at a phase ratio of unity. The resultant equilibrated aqueous and organic solutions were analyzed for acidity. A three-solvate model with molecular HNO₃ based mechanism was assumed for nitric acid extraction by TBP. With nonlinear chemometric methods, the coefficients were evaluated. With the set of optimized coefficients, derived on the basis of experiments reported in this work, the estimated solvate species and free-TBP species in the TBP containing organic phase were found to be in good agreement with the reported concentrations in the literature.     

Removal of uranium from sulfate leach liquor of salcrete deposits using tri-n-octyl amine

A uranyl sulfate leach liquor obtained by uranium leaching of a technological sample of salcrete deposits of Gabal Qatrani ore was subjected to uranium extraction using the liquid–liquid technique. Uranium was effectively extracted from sulfate leach liquor by [(10 %) tri-n-octylamine (TOA)] dissolved in xylene as a diluent. The extraction efficiency was markedly enhanced as the concentration of TOA increases from 1 to 10 %. The relevant factors controlling the extraction process of uranium using tri-n-octylamine were studied. These factors include the effect of diluents used, TOA concentration, contact time, settling time and phase ratio (O/A) v/v. The optimum extraction conditions were chosen. Stripping of uranium from the loaded TOA has been carried out using 5 % Na₂CO₃ as an effective stripping agent. More than 97 % of uranium was extracted by 10 % TOA, at contact time 10 min, settling time 5 min, phase ratio (V_O/V_A) 1/1 and at room temperature. The feasibility of using the TOA for preconcentration-separation of uranium was assessed by stripping studies. The loaded uranium onto TOA has been stripped by 100 % when using 5 % Na₂CO₃ as an efficient eluting agent at 15 min contact time, 5 min settling time and phase ratio (O/A) 2/1.     

Evaluation of radiation stability of N,N-didodecyl N′,N′-di-octyl diglycolamide: a promising reagent for actinide partitioning

The radiation stability of N,N-di-dodecyl-N′,N′-di-octyl-3-oxapentane-1,5-diamide (D³DODGA) was studied by γ-irradiation of the solvent up to a absorbed dose of 1,000 kGy. The effect of γ-irradiation on the radiolytic degradation of D³DODGA was assessed by measuring the distribution ratio of Am(III) (D _Am(III)) as well as the third phase formation in the irradiated D³DODGA-n-dodecane solution. The D _Am(III) in the irradiated solution decreased with increase of absorbed dose. The critical aqueous concentration of Nd(III) above which the third phase forms, increased with increase of absorbed dose. However, the limiting organic concentration of Nd(III) remained at ~25 mM irrespective of the absorbed dose. Recovery of Am(III) from the radiolytically degraded organic phase showed that back extraction of Am(III) was quantitative in a few contacts using dilute nitric acid. Our studies clearly indicated that radiolytic degradation of D³DODGA in n-dodecane is marginal even at the absorbed dose of 1,000 kGy, and therefore D³DODGA is a potential candidate for minor actinide partitioning.     

Separation and purification of 90Sr from PUREX HLLW using N,N,N′,N′-tetra(2-ethylhexyl) diglycolamide

This paper describes a method for the separation and purification of ⁹⁰Sr from PUREX–HLLW employing solvent extraction and precipitation techniques. 30 % TBP in n-dodecane was used for the removal of residual uranium, plutonium and neptunium from HLLW. Trivalent actinides and lanthanides were subsequently removed using N,N,N’,N’-tetra(2-ethylhexyl) diglycolamide (TEHDGA, 0.20 M in 30 % isodecyl alcohol and n-dodecane). ⁹⁰Sr was selectively extracted from actinides and lanthanides depleted HLLW using 0.3 M TEHDGA in 5 % isodecyl alcohol and dodecane. Loaded strontium was stripped using 0.01 M HNO₃ and further purified by radiochemical precipitation technique after adding Fe and natural strontium as carriers. Based on the experimental results, a flow-sheet was formulated and mCi levels of ⁹⁰Sr recovered.     

Tuning the diglycolamides for modifier-free minor actinide partitioning

The unsymmetrical diglycolamides (DGAs) such as N,N-dihexyl-N′,N′-dioctyl-3-oxapentane-1,5-diamide (DHDODGA), N,N-didecyl-N′,N′-dioctyl-3-oxapentane-1,5-diamide (D²DODGA), N,N-didodecyl-N′,N′-dioctyl-3-oxapentane-1,5-diamide (D³DODGA), were synthesized, and characterized by IR, NMR, and mass spectroscopic techniques. The extraction behaviour of Am(III), Eu(III), and Sr(II) by the solutions of these unsymmetrical DGAs in n-dodecane was studied as a function of concentration of nitric acid and DGA. The distribution ratio of Am(III) and Eu(III) increased with increase in the concentration of nitric acid; whereas, the distribution ratio of Sr(II) reached a maximum at 4 M nitric acid followed by decrease at higher acidities. The extraction of Am(III) and Eu(III) in 0.1 M DGA/n-dodecane decreased in the order DHDODGA > D²DODGA > D³DODGA. However, the order changed upon lowering the concentration of DGA. The third-phase formation behaviour of nitric acid and neodymium(III) in 0.1 M DGA/n-dodecane was studied as a function of concentration of nitric acid. The limiting organic concentration of nitric acid and neodymium increased with increase in the chain length of alkyl group attached to amidic nitrogen. Near stoichiometric amount of neodymium(III) was loaded in 0.1 M D³DODGA/n-dodecane without the formation of third-phase from 3 to 4 M nitric acid medium. The study revealed that the unsymmetrical diglycolamides D²DODGA and D³DODGA are superior candidates for partitioning the minor actinides from high-level liquid waste.     

Radiolytic stability of N,N-didodecyl-N’,N’-diethylhexyl diglycolamide

The radiolytic degradation of N,N-di-dodecyl-N′,N′-di-2-ethylhexyl-3-oxapentane-1,5-diamide (D³DEHDGA) was studied at various absorbed doses of γ-radiation. The degradation was assessed by measuring the variation in the extraction behavior of Am(III) in irradiated solvent systems composed of neat D³DEHDGA or 0.1 M D³DEHDGA/n-dodecane in the presence and absence of nitric acid. The distribution ratio of americium (D _Am(III)) decreased with increase of absorbed dose. The presence of n-dodecane and nitric acid enhanced the radiolytic degradation of the solvent. The third phase formation behavior of Nd(III) decreased with increase of absorbed dose and the third phase was not observed at absorbed doses above 100 kGy. The recovery of Am(III) from the irradiated system was near quantitative in five contacts. The study revealed that the extraction and stripping behavior of the irradiated solvent was quite satisfactory for partitioning of minor actinides from real wastes.     

Selective hydroisomerization of n-dodecane over platinum supported on zeolites

In this study, in order to develop catalysts for the selective isomerization of higher paraffin, the hydroisomerization reaction of n-dodecane was performed as a model reaction. Pt/ZSM-48, Pt/HZSM-5, Pt/HY, and Pt/SAPO-11 were examined for the selective hydroisomerization of n-dodecane. The catalysts were characterized via X-ray powder diffraction, N₂ adsorption, and the temperature-programmed desorption of ammonia. Among the catalysts studied, the Pt/HZSM-48 catalyst exhibited the best isomerization selectivity in the hydroisomerization reaction of n-dodecane, which is attributed to the moderate acid sites and medium-sized pores present in the HZSM-48. The highest iso-dodecane yield was obtained at a reaction temperature of 280 °C in the Pt/HZSM-48 catalyst. The optimal selectivity of the n-dodecane hydroisomerization over the Pt/SAPO-11 catalyst was obtained at approximately 300 °C, which was slightly higher than that of the Pt/HZSM-48 catalyst.     

Counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) using tris-2-ethyl hexyl phosphate (TEHP)

Evaluation of tris-2-ethyl hexyl phosphate (TEHP) for counter-current extraction and separation of U(VI) from a mixture of U(VI)–Th(IV)–Y(III) from nitric acid medium was carried out under wide experimental conditions. Batch extraction studies were carried out to investigate the effect of nitric acid concentration in feed solution, U(VI)/Th(IV) ratio and extractant concentration and the results were compared with established solvent such as tri-n-butyl phosphate (TBP) for separation of U(VI) from nitric acid medium. McCabe–Thiele diagrams for extraction as well as stripping of U(VI) were constructed under simulated conditions. Based on batch experiments, six stage counter-current extraction studies were conducted under various TEHP concentration and it was observed that 0.1 M TEHP/n-paraffin was most suitable for selective recovery of U(VI) from a mixture of U(VI)–Th(IV). An optimized condition, 0.1 M TEHP/n-paraffin, 2 M HNO₃ in feed and six number of stages was evaluated for selective extraction and stripping of U(VI) from a solution containing mixture of U(VI)–Th(IV)–Y(III) in nitric acid medium. The U(VI) in strip solution was precipitated using 30 % H₂O₂ at pH ~3. Average particle size of the final precipitate was found to be ~33 μm.     

Chiral Separation of Tenatoprazole and Several Related Benzimidazoles by Normal Phase LC Using Amylose-Based Stationary Phase

Simple and efficient analytical LC methods using amylose-based stationary phase Chiralpak AS-H were developed for direct enantioseparation of tenatoprazole and several related benzimidazoles. The chromatographic experiments were performed in the normal phase mode with n-hexane–ethanol–triethylamine (TEA) as mobile phase. The effects of the mobile phase additive, concentration of organic modifiers and column temperature were studied for the enantioseparation. The thermodynamic parameters were also calculated from the van’t Hoff plots. It was found that the enantioseparations were all enthalpy driven. The enantiomers of all compounds were resolved (R _s  > 3.3) within 14 min using n-hexane–ethanol–TEA (20:80:0.1%, v/v/v) as mobile phase with a flow rate of 0.4 mL min^?1 at 40 °C. The optimized method was validated for determination of the enantiomers of tenatoprazole in terms of linearity, precision and accuracy according to ICH guidelines and applied to the assay of tenantoprazole bulk drugs. The proposed method was shown to be accurate and suitable for the quantitative determination of tenatoprazole enantiomers.     

Separation of Am(III) from nitric acid medium by phosphonium ionic liquid–hydroxyacetamide mixture

A strongly hydrophobic phosphonium ionic liquid, trihexyltet radecylphosphonium bis(trifluoromethanesulfonyl)imide ([P₆₆₆₁₄][NTf₂]) was employed as the diluent for the extraction behavior of Am(III) using N,N-dihexyl-2-hydroxyacetamide(DHHy) as extractant. The extractibility of americium(III) in [P₆₆₆₁₄][NTf₂] phase was measured as a function of various parameters such as aqueous phase acidity (0.1–8 M), extractant concentration (0.01–0.15 M), equilibration time (5–120 min) and temperature (298–333 K). The extraction performance observed in DHHy/[P₆₆₆₁₄][NTf₂] was compared with those observed in N,N-dihexyloctamide (DHOA) in [P₆₆₆₁₄][NTf₂] and DHHy in other diluents such as [C₄mim][NTf₂] and n-dodecane. The effect of temperature on D _Am(III) in ionic liquid system and recovery of Am(III) from the loaded phase were ascertained in detail.     

Online recovery of radiocesium from soil,cellulose and plant samples by supercritical fluid extraction employing crown ethers and calix-crown derivatives as extractants

Two crown ethers (CEs) viz. dibenzo18crown6, and dibenzo12crown7 and three calix-crown derivatives viz. (octyloxy)calix[4]arene-mono-crown-6 (CMC), calix[4]arene-bis(o-benzocrown-6) (CBC), and calix[4]arene-bis(naphthocrown-6) (CNC) were evaluated for the recovery of ¹³⁷Cs from synthetic soil, cellulose (tissue paper), and plant samples by supercritical fluid extraction (SFE) route. CEs showed poor extraction of ¹³⁷Cs from soil matrix. SFE experiments using 1 × 10^?3 M solutions of CMC, CBC and CNC in acetonitrile at 3 M HNO₃ as modifiers displayed better extraction of ¹³⁷Cs, viz. 21(±2) % (CMC), 16.5(±3) % (CBC), and 4(±1) % (CNC). It was not possible to recover ¹³⁷Cs quantitatively from soil matrix. The inefficient extraction of ¹³⁷Cs from soil matrix was attributed to its incorporation into the interstitial sites. Experiments on tissue papers using CMC showed near quantitative ¹³⁷Cs recovery. On the other hand, recovery from plant samples varied between 50(±5) % (for stems) and 75(±5) % (for leaves).     

Low molecular weight organogelators derived from threefold symmetric tricarbamates

A group of new low molecular weight organogelators based on threefold symmetric tricarbamate were synthesized and characterized. The tricarbamates with long alkyl chains were able to gelate a wide range of polar and nonpolar organic solvents such as acetonitrile and cyclohexane, generally at concentrations lower than 20 g/L. The best organogel formation was obtained using a threefold symmetric tricarbamate in n-dodecane, in which a sufficiently transparent gel was formed at the critical gelation concentration 1 g/L. Intermolecular hydrogen bonding by the tricarbamate in a nonpolar solvent benzene-d₆ was indicated by ¹H NMR spectra. Its maximum UV absorption was 11 nm higher in chloroform than in n-dodecane, and this red shift indicated increased conjugation between the benzene core and the carbamate substituents, which confirmed a change in its conformation from nonpolar to polar solvent. The self-assembling behavior of the tricarbamate in dilute solutions was investigated by TEM. Fiber-like networks were observed in a large range of solution concentrations.     

Transport of U(VI) from sulphuric acid medium across supported liquid membrane (SLM) containing di-(2-ethylhexyl) phosphoric acid (D2EHPA)/n-dodecane as a carrier

This paper reports on the supported liquid membrane (SLM) based transport studies of U(VI) from sulphate medium using di-(2-ethylhexyl) phosphoric acid/n-dodecane as carrier. Polytetrafluoroethylene membrane was used as solid support and H₂SO₄ as receiver phase. The effects of various parameters such as receiver phase concentration, feed acidity, carrier concentration, U(VI) concentration, membrane thickness and membrane pore size on U(VI) transport had been investigated. With increase in H₂SO₄ concentrations and pH of feed solution there is an increase in U(VI) transport across the SLM. Similarly with increase in membrane thickness the U(VI) transport decrease whereas in case of pore size variation reverse results are obtained. The membrane thickness variation results showed that the U(VI) transport across the SLM is entirely diffusion controlled and the diffusion coefficient the D _(o) was calculated as 1.36 × 10^?7 cm² s^?1. Based on optimized condition, a scheme had been tested for selective recovery of U(VI) from ore leach solution containing a large number of other metal ions.     

A Simple Method for Determination of Homologue Imidazolium Cations in Ionic Liquids Using IC with Direct Conductivity Detection

An investigation was carried out into the fast determination of five homologue imidazolium cations in ionic liquids by ion chromatography using a cation-exchange column and direct conductivity detection. Ethylenediamine, complex organic acid (citric acid, oxalic acid and tartaric acid) and organic modifiers (acetonitrile) were used as mobile phase. The influences of the eluent types, eluent concentration, eluent pH and column temperature on separation of the cations were discussed. Simultaneous separation and determination of the five homologue imidazolium cations in ionic liquids were achieved under an optimum condition. The optimized mobile phase was consisted of 0.25 mmol L^?1 ethylenediamine + 0.5 mmol L^?1 citric acid + 3% acetonitrile (v/v) (pH 4.1), set at a flow rate of 1.0 mL min^?1. The column temperature was 40 °C and detection limits were obtained in the range of 1.1–45.6 mg L^?1. The relative standard deviations of the chromatographic peak areas for the cations were <3.0% (n = 5). This method was successfully applied to separate imidazolium cations in ionic liquids produced by organic synthesis. The recoveries of spiked components were 92.5–101.9%.     

Biphasic kinetic investigations on the evaluation of non-salt forming reductants for Pu(IV) stripping from tributyl phosphate and N,N-dihexyl octanamide solutions in n-dodecane

The relative stability of different oxidation states of actinide elements is influenced by the nature of complexes formed and redox equilibria in aqueous/non-aqueous solutions. The reduction/stripping studies on Pu(IV) ions from loaded organic phases of 1.1 M tributyl phosphate and of 1.1 M N,N-dihexyl octanamide in n-dodecane were studied using organic soluble tert-butyl hydroquinone (TBH) and aqueous soluble reductants like acetaldoxime (AX) and hydroxyurea (HU). These studies were carried out as a function of reductant and nitric acid concentration (0.5–4 M HNO₃) and of time. The changes in Pu oxidation states were followed by spectrophotometry for TBH and by distribution ratio values for AX and HU as reductants. Spectrophotometric investigations using TBH as reductant showed that it was desirable to strip Pu(III) formed after reduction of Pu(IV) in the organic phase, which may otherwise be reconverted to extractable Pu(IV) by in situ generated HNO₂ from oxidative degradation of TBH to tert-butyl quinone. Similarly, the biphasic reduction/stripping of Pu(IV) using AX and HU as reductant rate was affected adversely with increased aqueous phase acidity. This data will help in the accurate simulation of Pu separation processes using these reductants in mixer-settlers/pulsed columns or centrifugal contactors.     

Determination of Tangeretin in Rat Plasma by LC-Electrospray-Ion Trap MS

A selective, sensitive, and accurate method has been developed and validated for the quantification of tangeretin in rat plasma. The application of LC-electrospray-ion trap mass spectrometry in full scan and multiple reactions monitoring modes were investigated. Following solid phase extraction using a hydrophilic–lipophilic balance cartridge, the analytes were separated on a C₁₈ column using an isocratic mobile phase composed of acetonitrile/water (50:50, v/v) containing 0.3% formic acid. In full scan mode, the LOQ was 2 ng mL^?1. The standard calibration curve was linear (R ² = 0.9999) over the concentration range 2–200 ng mL^?1. The precision over the concentration range was within 15% (RSD) and the accuracy was ranged from 86 to 115%. In multiple reaction monitoring mode, the LOQ was 1 ng mL^?1 and the standard calibration curve was linear (R ² = 0.9976) over the concentration range 1–100 ng mL^?1 with a precision of 12% and accuracy rangeing from 91 to 113%.     

Optimization and Validation of RP-LC/UV–VIS Detection Method for Simultaneous Determination of Fat-Soluble Anti-Oxidant Vitamins, all-trans-Retinol and α-Tocopherol in Human Serum: Effect of Experimental Parameters

A versatile isocratic reversed-phase liquid chromatographic/ultraviolet–visible detection method for simultaneous determination of all-trans-retinol and α-tocopherol in human serum was developed and validated after optimization of various chromatographic conditions and other experimental parameters. Analytes were separated on a Kromasil 100 RP₁₈ (150 × 4.6 mm, 5 μm) analytical column protected by a Perkin Elmer RP₁₈ (30 × 4.6 mm, 10 μm) guard cartridge. The mobile phase, methanol–water (96:04 v/v) was pumped at a flow rate of 2.2 mL min^?1 and the column eluents were monitored at the wavelength of 292 nm using retinyl acetate (1.0 μg mL^?1) as the internal standard for both analytes. Sample preparation was based on protein precipitation and stabilization with 2,6-bis(1,1-dimethylethyl)-4-methylphenol/ethanol and a two step extraction process using n-hexane followed by dichloromethane as extraction solvents. Sample size was kept 20 μL and separation of analytes was achieved in less than 7 min. The present method demonstrated acceptable values for specificity/selectivity, linearity within the expected concentration range, recovery, precision, sensitivity, stability of solutions, robustness, and system suitability specifications and tests. The method was used for monitoring all-trans-retinol and α-tocopherol concentrations in human serum samples and could also be applied to other sample matrices such as brain slices and cosmetic products if attention is paid to the extraction procedure.