MHD mixed convection stagnation-point flow of a nanofluid over a vertical permeable surface: a comprehensive report of dual solutions

The steady laminar magnetohydrodynamic mixed convection boundary layer flow of a nanofluid near the stagnation-point on a vertical permeable plate with prescribed external flow and surface temperature is investigated in this study. Here, both assisting and opposing flows are considered and studied. Using appropriate similarity variables, the governing equations are transformed into nonlinear ordinary differential equations in the dimensionless stream function, which is solved numerically using the Runge–Kutta scheme coupled with a conventional shooting procedure. Three different types of nanoparticles, namely copper Cu, alumina Al₂O₃ and titania TiO₂ with water as the base fluid are considered. Numerical results are obtained for the skin-friction coefficient and Nusselt number as well as for the velocity and temperature profiles for some values of the governing parameters, namely, the volume fraction of nanoparticles ?, permeability parameter f _o , magnetic parameter M and mixed convection parameter λ. It is found that dual solutions exist for both assisting and opposing flows, and the range of the mixed convection parameter for which the solution exists, increases with suction, magnetic field and volume fraction of nanoparticles.     

Mixed convection boundary layer flow past a wedge with permeable walls

The effects of suction/injection on steady laminar mixed convection boundary layer flow over a permeable horizontal surface of a wedge in a viscous and incompressible fluid is considered in this paper. The similarity solutions of the governing boundary layer equations are obtained for some values of the suction/injection parameter f ₀, the constant exponent m of the wall temperature as well as the mixed convection parameter λ. The resulting system of nonlinear ordinary differential equations is solved numerically for both assisting and opposing flow regimes using an implicit finite-difference scheme known as the Keller-box method. Numerical results for the reduced skin friction coefficient, the local Nusselt number, and the velocity and temperature profiles are obtained for various values of parameters considered. Dual solutions are found to exist for the case of opposing flow.     

Darcian mixed convection plumes along vertical adiabatic surfaces in a saturated porous medium

The mixed convection flow due to a line thermal source embedded at the leading edge of an adiabatic vertical plane surface immersed in a saturated porous medium has been studied. Both weakly and strongly buoyant plume regimes have been considered. The cases of buoyancy assisting and buoyancy opposing flow conditions have been incorporated in the analysis. The results are presented for the entire range of buoyancy parameter from the pure forced convection (ξ=0) to the pure free convection (ξ → ∞@#@) regimes. For buoyancy-assisting flow, the wall temperature and the velocity at the wall increase as the plume strength increases. However, they all decrease as the free-stream velocity increases. For buoyancyopposing flow, the temperature at the wall increases as the strength of the plume increases but velocity at the wall decreases.     

Influence of lateral mass flux on mixed convection heat and mass transfer over inclined surfaces in porous media

 The effect of lateral mass flux on mixed convection heat and mass transfer in a saturated porous medium adjacent to an inclined permeable surface is analyzed. A similarity solution is obtained when surface temperature and concentration, free stream velocity and injection/suction velocity of fluid are prescribed as power functions of distance from the leading edge. The cases when the flow and buoyancy forces are in the same and opposite directions are discussed both for aiding and opposing buoyancy effects. The governing parameters are the mixed convection parameter Gr, the Lewis number Le, the buoyancy ratio N, the lateral mass flux parameter f _w, representing the effects of injection or withdrawal of fluid at the wall, and λ which specifies three cases of the inclined plate. The interactive effect of these parameters on heat and mass transfer rates are presented. It is observed that the diffusion ratio (Le) has a more pronounced effect on concentration field than on flow and temperature fields. It is found that the rates of heat and mass transfer increase with suction and decrease with injection of the fluid. Received on 31 August 2000 / Published online: 29 November 2001     

Hall effect on MHD free convection boundary layer flow past a vertical flat plate

Effects of Hall current on MHD free convection boundary layer flow of a viscous incompressible electrically conducting fluid past a heated vertical flat plate of finite dimension in the presence of a uniform transverse magnetic field have been studied. An exact solution of the governing equations describing the flow has been obtained. The velocity field, induced magnetic field and bulk temperature distributions in the boundary layer flow have been discussed. It is found that the velocity components increase with an increase in Hall parameter. It is noticed that the induced magnetic field components are radically influenced by the Hall parameter. It is also found that the magnitude of bulk temperature in the x-direction decreases with an increase in either Hall parameter or magnetic parameter. On the other hand, the magnitude of the bulk temperature in the z-direction increases with an increase in Hall parameter whereas it decreases with an increase in magnetic parameter.     

Mixed Convection Boundary Layer Flow Near the Stagnation Point on a Vertical Surface Embedded in a Porous Medium with Anisotropy Effect

The steady boundary-layer flow near the stagnation point on a vertical flat plate embedded in a fluid-saturated porous medium characterized by an anisotropic permeability is investigated. Using appropriate similarity transformation, the governing system of partial differential equations is transformed into a system of ordinary differential equations. This system is then solved numerically. The features of the flow and the heat transfer characteristics for different values of the governing parameters, namely, the modified mixed convection parameter Λ, and the anisotropy parameter A are analyzed and discussed. It is found that dual solutions exist for both assisting and opposing flows. Moreover, the range of Λ for which the solution exists increases with A.     

MHD flow and heat transfer of a power-law non-Newtonian nanofluid (Cu–H<Subscript>2</Subscript>O) over a vertical stretching sheet

A steady-state mixed convection boundary layer flow of an electrically conducting nanofluid (Cu–H₂O) obeying a power-law model in the presence of an alternating magnetic field due to a stretching vertical heated sheet is investigated numerically through the use of Wolfram Mathematica. The surface stretching velocity and the surface temperature are assumed to vary as linear functions of the distance from the origin. A similarity solution is presented, which depends on the nanoparticle volume fraction, power-law parameter, magnetic field parameter, buoyancy convection parameter, and modified Prandtl number.     

Slip effects on unsteady mixed convection of hybrid nanofluid flow near the stagnation point

The unsteady mixed convection of the Al2O3-Cu/H2O hybrid nanofluid flow near the stagnation point past a vertical plate is analyzed. The bvp4c technique is used to solve the resulting ordinary differential equations. The combined effects of the velocity and thermal slip are addressed. The effects of different relevant physical parameters are studied numerically. The results show that the heat transfer rate is reduced when the volume fraction of the nanoparticles increases, while the unsteadiness...     

Effect of viscous dissipation on the mixed convection heat transfer from an exponentially stretching surface

The mixed convection flow and heat transfer from an exponentially stretching vertical surface in a quiescent fluid is analyzed using similarity solution technique. Wall temperature and stretching velocity are assumed to have specific exponential function forms. The influence of buoyancy along with viscous dissipation on the convective transport in the boundary layer region is analyzed in both aiding and opposing flow situations. The flow is governed by the mixed convection parameter Gr/Re². The velocity and temperature inside the boundary layer are observed to be influenced by the parameters like Prandtl number Pr, Gebhart number Gb. Significant changes are observed in non-dimensional skin friction and heat transfer coefficients due to viscous dissipation in the medium. The flow and temperature distributions inside the boundary layer are analyzed and the results for non-dimensional skin friction and heat transfer coefficients are discussed through computer generated plots.     

Mixed convection boundary layer flow along vertical moving thin needles with variable heat flux

The problem of steady laminar mixed convection boundary layer flow of an incompressible viscous fluid along vertical moving thin needles with variable heat flux for both assisting and opposing flow cases is theoretically considered in this paper. The governing boundary layer equations are first transformed into non-dimensional forms. The curvature effects are incorporated into the analysis whereas the pressure variation in the axial direction has been neglected. These equations are then transformed into similarity equations using the similarity variables, which are solved numerically using an implicit finite-difference scheme known as the Keller-box method. The solutions are obtained for a blunt-nosed needle (m = 0). Numerical calculations are carried out for various values of the dimensionless parameters of the problem, which include the mixed convection parameter λ, the Prandtl number Pr and the parameter a representing the needle size. It is shown from the numerical results that the skin friction coefficient, the surface (wall) temperature and the velocity and temperature profiles are significantly influenced by these parameters. The results are presented in graphical form and are discussed in detail.     

Entropy analysis in electrical magnetohydrodynamic(MHD) flow of nanofluid with effects of thermal radiation,viscous dissipation,and chemical reaction

The unsteady mixed convection flow of electrical conducting nanofluid and heat transfer due to a permeable linear stretching sheet with the combined effects of an electric field, magnetic field, thermal radiation, viscous dissipation, and chemical reaction have been investigated. A similarity transformation is used to transform the constitutive equations into a system of nonlinear ordinary differential equations.The resultant system of equations is then solved numerically using implicit finite difference method.The velocity, temperature, concentration, entropy generation, and Bejan number are obtained with the dependence of different emerging parameters examined. It is noticed that the velocity is more sensible with high values of electric field and diminished with a magnetic field. The radiative heat transfer and viscous dissipation enhance the heat conduction in the system. Moreover, the impact of mixed convection parameter and Buoyancy ratio parameter on Bejan number profile has reverse effects. A chemical reaction reduced the nanoparticle concentration for higher values.     

Steady laminar mixed convection stagnation-point flow of a nanofluid over a vertical permeable surface in the presence of a magnetic field

A similarity solution for a steady laminar mixed convection boundary layer flow of a nanofluid near the stagnation point on a vertical permeable plate with a magnetic field and a buoyancy force is obtained by solving a system of nonlinear ordinary differential equations. These equations are solved analytically by using a new kind of a powerful analytic technique for nonlinear problems, namely, the homotopy analysis method (HAM). Three different types of nanoparticles, namely, copper (Cu), alumina (Al₂O₃), and titanium oxide (TiO₂), with water as the base fluid are considered. The influence of the volume fraction of nanoparticles, permeability parameter, magnetic parameter, and mixed convection parameter on the surface shear stress and surface heat transfer, as well as on the velocity and temperature profiles, is considered. It is observed that the skin friction coefficient and the local Nusselt number increase with the nanoparticle volume fraction for all types of nanoparticles considered in this study. The greatest values of the skin friction coefficient and the local Nusselt number are obtained for Cu nanoparticles.     

Computational study of combined effects of conduction-radiation and hydromagnetics on natural convection flow past magnetized permeable plate

The computational study of the combined effects of radiation and hydromagnetics on the natural convection flow of a viscous,incompressible,and electrically conducting fluid past a magnetized permeable vertical plate is presented.The governing non-similar equations are numerically solved by using a finite difference method for all values of the suction parameter ξ and the asymptotic solution for small and large values of ξ.The effects of varying the Prandtl number P r,the magnetic Prandtl number P r m,the magnetic force parameter S,the radiation parameter R d,and the surface temperature θ w on the coefficients of the skin friction,the rate of heat transfer,and the current density are shown graphically and in tables.An attempt is made to examine the effects of the above mentioned physical parameters on the velocity profile,the temperature distribution,and the transverse component of the magnetic field.     

Simultaneous effect of rotation and natural convection on the flow about a liquid sphere

The problem of mixed convection around a liquid sphere that experiences a rotation about its axis parallel to the free stream is studied numerically using a finite- difference technique. The coupled boundary-layer energy and momentum equations are numerically solved over a wide range of Grashof number that represents the cases of aiding and opposing free convection and for wide range of the spin parameter Ta/Re². The surface of the sphere also rotates as a result of the shear stress exerted from the external flow of air. The effect of both parameters on the velocity components as well as the temperature within the thermal boundary-layer is presented. Results show that increasing the aiding free convection and the spin parameter cause increases in the shear stress and the local heat transfer coefficient.     

On the Temperature Slip Boundary Condition in a Mixed Convection Boundary-Layer Flow in a Porous Medium

A problem derived previously (Rohni et?al., Transp Porous Media 92:1?C14, 2012) for unsteady mixed convection flow in a porous medium involving a ??temperature slip?? boundary condition and fluid transfer through the boundary is considered. It is shown that the solution to this problem can be directly related to the solution of the corresponding problem for a prescribed surface temperature, involving a mixed convection parameter ??, an unsteadiness parameter A and transpiration parameter s. This latter problem is discussed in detail, particular attention being given to the steady analogue, A?=?0, allowing for fluid transfer through the surface, and to the unsteady problem, A?>?0, for an impermeable surface, s?=?0. Asymptotic results are obtained for large fluid transfer rates, ${s \gg 1}$ and ${s <0 , |s| \gg 1}$ and for large A. Particular attention is given to deriving asymptotic results for the critical points which determine the range of existence of solutions.     

Natural convection in a liquid metal heated from above and influenced by a magnetic field

Natural convection in a liquid metal heated locally at its upper surface and affected by a vertical magnetic field is investigated both experimentally and numerically. The experiments are conducted in a cylindrical test cell of large aspect ratio which is typical for application. The cell is filled with the liquid alloy GaInSn in eutectic composition. Temperature and velocity are measured using thermocouples and an electric potential probe, respectively. In the absence of the magnetic field the experimental results indicate a dependence of the Nusselt number on the Rayleigh number according to the law Nu∝Ra^0.191. The particular value of the scaling exponent is in excellent agreement with the prediction of a scaling analysis for laminar, boundary layer-type flow in a low-Prandtl number fluid. Furthermore the experiments demonstrate that the Nusselt number and therefore the convective heat losses can be decreased by about 20% when a magnetic field of moderate strength (B=0.1 T) is present. The numerical simulations solve the Boussinesq equations in an axisymmetric geometry using a finite element method. The results of the simulations are both quantitatively and qualitatively in good agreement with the experimental observations. Deviations are attributed to the three-dimensional characteristics of the flow.     

Mixed Convection Boundary-Layer Flow Along a Vertical Cylinder Embedded in a Porous Medium Filled by a Nanofluid

The steady mixed convection boundary-layer flow on a vertical circular cylinder embedded in a porous medium filled by a nanofluid is studied for both cases of a heated and a cooled cylinder. The governing system of partial differential equations is reduced to ordinary differential equations by assuming that the surface temperature of the cylinder and the velocity of the external (inviscid) flow vary linearly with the axial distance x measured from the leading edge. Solutions of the resulting ordinary differential equations for the flow and heat transfer characteristics are evaluated numerically for various values of the governing parameters, namely the nanoparticle volume fraction ${\phi}$ , the mixed convection or buoyancy parameter ?? and the curvature parameter ??. Results are presented for the specific case of copper nanoparticles. A critical value ?? _c of ?? with ?? _c <?0 is found, with the values of | ?? _c| increasing as the curvature parameter ?? or nanoparticle volume fraction ${\phi}$ is increased. Dual solutions are seen for all values of ?? >??? _c for both aiding, ?? >?0 and opposing, ?? <?0, flows. Asymptotic solutions are also determined for both the free convection limit ${(\lambda \gg 1)}$ and for large curvature parameter ${(\gamma \gg 1)}$ .     

Mixed convection boundary layers in the stagnation-point flow toward a stretching vertical sheet

An analysis is made for the steady mixed convection boundary layer flow near the two-dimensional stagnation-point flow of an incompressible viscous fluid over a stretching vertical sheet in its own plane. The stretching velocity and the surface temperature are assumed to vary linearly with the distance from the stagnation-point. Two equal and opposite forces are impulsively applied along the x-axis so that the wall is stretched, keeping the origin fixed in a viscous fluid of constant ambient temperature. The transformed ordinary differential equations are solved numerically for some values of the parameters involved using a very efficient numerical scheme known as the Keller-box method. The features of the flow and heat transfer characteristics are analyzed and discussed in detail. Both cases of assisting and opposing flows are considered. It is observed that, for assisting flow, both the skin friction coefficient and the local Nusselt number increase as the buoyancy parameter increases, while only the local Nusselt number increases but the skin friction coefficient decreases as the Prandtl number increases. For opposing flow, both the skin friction coefficient and the local Nusselt number decrease as the buoyancy parameter increases, but both increase as Pr increases. Comparison with known results is excellent.     

Radiation effect on mixed convection over an isothermal cone in porous media

The radiation effect on the mixed convection flow of an optically dense viscous fluid adjacent to an isothermal cone embedded in a saturated porous medium with Rosseland diffusion approximation is numerically investigated. The entire regime of the mixed convection is included, as the mixed convection parameter of χ varies from 0 (pure free convection) to 1 (pure forced convection). The transformed nonlinear system of equations is solved by using an implicit finite difference method. Numerical results are given for the dimensionless temperature profiles and the local Nusselt number for various values of the mixed convection parameter χ, the cone angle parameter m, the radiation-conduction parameter R _d and the surface temperature parameter H. The local Nusselt number decreases initially, reaches a minimum in the intermediate value of χ and then increases gradually. It is apparent that increasing the cone angle parameter m enhances the local Nusselt number. The local Nusselt number is significantly increased for the large values of the radiation-conduction parameter R _d and the surface temperature parameter H, i.e., radiation effect becomes pronounced. Received on 25 October 1999     

The effects of transpiration on the boundary layer flow and heat transfer over a vertical slender cylinder

This paper deals with a theoretical (numerical) analysis of the effects that blowing/injection and suction have on the steady mixed convection or combined forced and free convection boundary layer flows over a vertical slender cylinder with a mainstream velocity and a wall surface temperature proportional to the axial distance along the surface of the cylinder. Both cases of buoyancy forces aid and oppose the development of the boundary layer are considered. Similarity equations are derived and their solutions are dependent upon the mixed convection parameter, the non-dimensional transpiration parameter and the curvature parameter, as well as of the Prandtl number. Dual solutions for the previously studied mixed convection boundary layer flows over an impermeable surface of the cylinder are shown to exist also in the present problem for aiding and opposing flow situations.