A microchip electrophoretic assay for DNA methyltransferase activity based on methylation‐sensitive endonuclease DpnⅡ

DNA methylation is a significant epigenetic modification and the methods for the detection of DNA methyltransferase (MTase) activity are important due to aberrant methylation closely related to the occurrence of cancer. In this study, a simple and rapid microchip electrophoresis (ME) coupled with LED‐induced fluorescence (LEDIF) method was presented for the detection of Dam MTase activity. This strategy was based on methylation‐sensitive endonuclease DpnⅡ which could recognize the same specific site 5′‐GATC‐3′ with Dam MTase in double‐stranded DNA (dsDNA). The adenines in the specific site could be methylated by Dam MTase, then the special site could not be digested by DpnⅡ. Both methylated dsDNA and unmethylated dsDNA could be analyzed by ME‐LEDIF after stained by SYBR gold. The results showed the fluorescence intensities of methylated dsDNA were directly proportional to Dam MTase activities in the range of 0.5–20 U/mL with a detection limit of 0.12 U/mL. Furthermore, the method could successfully be applied to evaluation experiments of Dam MTase inhibitors. The results confirmed the ME‐LEDIF method is a promising approach for inhibitors screening of DNA MTase and development of anticancer drugs     

Exploring both sequence detection and restriction endonuclease cleavage kinetics by recognition site via single-molecule microfluidic trapping

We demonstrate the feasibility of a single-molecule microfluidic approach to both sequence detection and obtaining kinetic information for restriction endonucleases on dsDNA. In this method, a microfluidic stagnation point flow is designed to trap, hold, and linearize double-stranded (ds) genomic DNA to which a restriction endonuclease has been pre-bound sequence-specifically. By introducing the cofactor magnesium, we determine the binding location of the enzyme by the cleavage process of dsDNA as in optical restriction mapping, however here the DNA need not be immobilized on a surface. We note that no special labeling of the enzyme is required, which makes it simpler than our previous scheme using stagnation point flows for sequence detection. Our accuracy in determining the location of the recognition site is comparable to or better than other single molecule techniques due to the fidelity with which we can control the linearization of the DNA molecules. In addition, since the cleavage process can be followed in real time, information about the cleavage kinetics, and subtle differences in binding and cleavage frequencies among the recognition sites, may also be obtained. Data for the five recognition sites for the type II restriction endonuclease EcoRI on λ-DNA are presented as a model system. While the roles of the varying fluid velocity and tension along the chain backbone on the measured kinetics remain to be determined, we believe this new method holds promise for a broad range of studies of DNA-protein interactions, including the kinetics of other DNA cleavage processes, the dissociation of a restriction enzyme from the cleaved substrate, and other macromolecular cleavage processes.     

A Peptide Nucleic Acid (PNA) Heteroduplex Probe Containing an Inosine–Cytosine Base Pair Discriminates a Single‐Nucleotide Difference in RNA

Selective discrimination of a single‐nucleotide difference in single‐stranded DNA or RNA remains a challenge with conventional DNA or RNA probes. A peptide nucleic acid (PNA)‐derived probe, in which PNA forms a pseudocomplementary heteroduplex with inosine‐containing DNA or RNA, effectively discriminates a single‐nucleotide difference in a closely related group of sequences of single‐stranded DNA and/or RNA. The pseudocomplementary PNA heteroduplex is easily converted to a fluorescent probe that distinctively detects a member of highly homologous let‐7 microRNAs.     

Sequence-specific recognition of HIV-1 DNA based upon nicking-assisted strand displacement amplification and triplex DNA

Nucleic acid amplification test is a reliable method for primary human immunodeficiency virus(HIV) infection diagnosis.Herein, a novel fluorescent method for sequence-specific recognition of DNA fragment of HIV-1 was established based upon nicking-assisted strand displacement amplification(SDA) and triplex DNA. In the presence of target dsDNA, nicking-assisted SDA process generated a lot of ssDNA, which hybridized with molecular beacon to produce signal. The fluorescence intensity was proportional to the concentration of target dsDNA within the range from 5 to 1000 pmol/L, with a detection limit of 1.4 pmol/L. Moreover, it successfully distinguished target dsDNA from the nucleic acid extractive of human blood. Thus this method has the merit of high sensitivity, and it is suitable for sequence-specific recognition of target dsDNA in complex matrices, which made it a potential application in diagnosis of acquired immunodeficiency syndrome(AIDS) in the future.     

A novel fluorescent biosensor for sequence-specific recognition of double-stranded DNA with the platform of graphene oxide

A fluorescent biosensor for sequence-specific recognition of double-stranded DNA (dsDNA) was developed based upon the DNA hybridization between dye-labeled single-stranded DNA (ssDNA) and double-stranded DNA. The fluorescence of FAM-labeled single-stranded DNA was quenched when it adsorbed on the surface of graphene oxide (GO). Upon addition of the target dsDNA, a homopyrimidine·homopurine part of dsDNA on the Simian virus 40 (SV40) (4424-4440, gp6), hybridization occurred between the dye-labeled DNA and the target dsDNA, which induced the dye-labeled DNA desorbed from the surface of GO, and turned on the fluorescence of the dye. Under the optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of target dsDNA in the range 40.0-260 nM, and the detection limit was found to be 14.3 nM alongside the good sequence selectivity.     

In situ DNA oxidative damage by electrochemically generated hydroxyl free radicals on a boron-doped diamond electrode

In situ DNA oxidative damage by electrochemically generated hydroxyl free radicals has been directly demonstrated on a boron-doped diamond electrode. The DNA-electrochemical biosensor incorporates immobilized double-stranded DNA (dsDNA) as molecular recognition element on the electrode surface, and measures in situ specific binding processes with dsDNA, as it is a complementary tool for the study of bimolecular interaction mechanisms of compounds binding to DNA and enabling the screening and evaluation of the effect caused to DNA by radicals and health hazardous compounds. Oxidants, particularly reactive oxygen species (ROS), play an important role in dsDNA oxidative damage which is strongly related to mutagenesis, carcinogenesis, autoimmune inflammatory, and neurodegenerative diseases. The hydroxyl radical is considered the main contributing ROS to endogenous oxidation of cellular dsDNA causing double-stranded and single-stranded breaks, free bases, and 8-oxoguanine occurrence. The dsDNA-electrochemical biosensor was used to study the interaction between dsDNA immobilized on a boron-doped diamond electrode surface and in situ electrochemically generate hydroxyl radicals. Non-denaturing agarose gel-electrophoresis of the dsDNA films on the electrode surface after interaction with the electrochemically generated hydroxyl radicals clearly showed the occurrence of in situ dsDNA oxidative damage. The importance of the dsDNA-electrochemical biosensor in the evaluation of the dsDNA-hydroxyl radical interactions is clearly demonstrated.     

Dynamic-light-scattering-based sequence-specific recognition of double-stranded DNA with oligonucleotide-functionalized gold nanoparticles

An ultrasensitive and simple dynamic-light-scattering (DLS) assay for the sequence-specific recognition of double-stranded DNA (dsDNA) was developed based on detection of the average diameter change of Au nanoparticle (AuNP) probes modified with oligonucleotides 5'-TTTCTCTTCCTT- CTCTTC-(T)(12)-SH-3' (Oligo 1) and 5'-TTCTTTCTTTTCTTTTTC-(T)(12)- SH-3' (Oligo 2). The target dsDNA was composed of two complementary oligonucleotides: 5'-AAAGAGAAGGAAGAGAAGAAGAAAGAAAAGAAAAAG-3' (Oligo 3) and 3'-TTTCTCTTCCTTCTCTTCTTCTTTCTTTTCTTTTTC-5' (Oligo 4). Hybridization of the two AuNPs-Oligo probes with the target dsDNA induced aggregation of the target dsDNA by forming triplex DNA, which accordingly increased the average diameter. This diameter change could then be detected by DLS. The average diameter was proportional to the target dsDNA concentration over the range from 593 fM to 40 pM, with a detection limit of 593 fM. Moreover, the assay had good sequence specificity for the target dsDNA.     

Site-specific detection of DNA methylation utilizing mCpG-SEER

Currently there are no direct methods for the sequence-specific detection of DNA-methylation at CpG dinucleotides, which provide a possible diagnostic marker for cancer. Toward this goal, we present a methodology termed mCpG-SEquence Enabled Reassembly (mCpG-SEER) of proteins utilizing a split green fluorescent protein (GFP) tethered to specific DNA recognition elements. Our system, mCpG-SEER, employs a zinc-finger attached to one-half of GFP to target a specific sequence of dsDNA, while a methyl-CpG binding domain protein attached to the complementary half of GFP targets an adjacent methylated CpG dinucleotide site. We demonstrate that the presence of both DNA sites is necessary for the reassembly and concomitant fluorescence of the reassembled GFP. We further show that the GFP-dependent fluorescence reaches a maximum when the methyl-CpG and zinc-finger sites are separated by two base pairs and the fluorescence signal is linear to 5 pmol of methylated target DNA. Finally, the specificity of this reporter system, mCpG-SEER, was found to be >40-fold between a methylated versus a nonmethylated CpG target site.     

Excited-state intramolecular proton transfer distinguishes microenvironments in single- and double-stranded DNA

Herein, the efficient interaction of an environment-sensitive fluorophore that undergoes excited-state intramolecular proton transfer (ESIPT) with DNA has been realized by conjugation of a 3-hydroxychromone (3HC) with polycationic spermine. On binding to a double-stranded DNA (dsDNA), the ratio of the two emission bands of the 3HC conjugates changes up to 16-fold, so that emission of the ESIPT product increases dramatically. This suggests an efficient screening of the 3HC fluorophore from the water molecules in the DNA complex, which is probably realized by its intercalation into dsDNA. In sharp contrast, the 3HC conjugates show only moderate changes in the dual emission on binding to a single-stranded DNA (ssDNA), indicating a much higher fluorophore exposure to water at the binding site. Thus, the 3-hydroxychromone fluorophore being conjugated to spermine discriminates the binding of this polycation to dsDNA from that to ssDNA. Consequently, ESIPT-based dyes are promising for monitoring the interaction of polycationic molecules with DNA and probing the microenvironment of their DNA binding sites.     

Spectroscopic Electrochemical Studies of Interaction Between Fuchsin Basic DNA

Visible spectroscopic and electrochemical methods were used to study the interactions between DNA and fuchsin basic(FB). FB has an irreversible electro-oxidation peak in 5 mmol/L Tris-HCl buffer solution at pH = 7.4 on a glassy carbon electrode(GCE). After adding certain concentration of dsDNA, the oxidation peak current of FB decreases, but the peak potential hardly changs. The visible absorption spectroscopic study shows that the binding mode of FB to dsDNA is intercalative binding and electrostatic binding when the ratio of the concentration of dsDNA to FB is smaller than 0. 2, and a new substance, which produces a new absorption peak, is obtained via a covalent binding between dsDNA and FB apart from intercalative binding and electrostatic binding when the ratio of the concentration of dsDNA to FB is larger than 0. 2. The visible absorption spectra varies no longer when the ratio of the concentration of dsDNA to FB is larger than 1.5. A mean binding ratio of dsDNA to FB was determined to be 1.4: 1,suggesting that two complexes FB-dsDNA and FB-2dsDNA be formed. The interaction between FB and ssDNA was only electrostatic binding. The more powerful interaction of FB with dsDNA than with ssDNA may be applied for the recognition of dsDNA and ssDNA, and in DNA biosensor as hybridization indicator.     

Voltammetric Studies on the Recognition of a Copper Complex to Single‐ and Double‐Stranded DNA and Its Application in Gene Biosensor

A mixed‐ligands copper complex [Cu(phendione)(DAP)]SO₄ (phendione=1,10‐phenanthroline‐5,6‐dione, DAP=2,3‐diaminophenazine) was synthesized. Cyclic voltammetry showed that the complex underwent an obvious decrease of redox peak currents and positive shift of formal potential after interaction with double‐stranded DNA (dsDNA), suggesting that the copper complex behaved as a typical metallointercalator for dsDNA, The recognition properties of the copper complex to single‐stranded DNA (ssDNA) and dsDNA were assessed using surface‐based electrochemical methods and the results suggested that the complex had obviously different redox signals at ssDNA and dsDNA modified electrodes. The copper complex was further used as an electroactive indicator for the detection of cauliflower mosaic virus (CaMV) 35S promoter gene.     

Direct Surface‐Enhanced Raman Scattering Analysis of DNA Duplexes

The exploration of the genetic information carried by DNA has become a major scientific challenge. Routine DNA analysis, such as PCR, still suffers from important intrinsic limitations. Surface‐enhanced Raman spectroscopy (SERS) has emerged as an outstanding opportunity for the development of DNA analysis, but its application to duplexes (dsDNA) has been largely hampered by reproducibility and/or sensitivity issues. A simple strategy is presented to perform ultrasensitive direct label‐free analysis of unmodified dsDNA with the means of SERS by using positively charged silver colloids. Electrostatic adhesion of DNA promotes nanoparticle aggregation into stable clusters yielding intense and reproducible SERS spectra at nanogram level. As potential applications, we report the quantitative recognition of hybridization events as well as the first examples of SERS recognition of single base mismatches and base methylations (5‐methylated cytosine and N6‐methylated Adenine) in duplexes.     

Uracil-directed ligand tethering: an efficient strategy for uracil DNA glycosylase (UNG) inhibitor development

Uracil DNA glycosylase (UNG) is an important DNA repair enzyme that recognizes and excises uracil bases in DNA using an extrahelical recognition mechanism. It is emerging as a desirable target for small-molecule inhibitors given its key role in a wide range of biological processes including the generation of antibody diversity, DNA replication in a number of viruses, and the formation of DNA strand breaks during anticancer drug therapy. To accelerate the discovery of inhibitors of UNG we have developed a uracil-directed ligand tethering strategy. In this efficient approach, a uracil aldehyde ligand is tethered via alkyloxyamine linker chemistry to a diverse array of aldehyde binding elements. Thus, the mechanism of extrahelical recognition of the uracil ligand is exploited to target the UNG active site, and alkyloxyamine linker tethering is used to randomly explore peripheral binding pockets. Since no compound purification is required, this approach rapidly identified the first small-molecule inhibitors of human UNG with micromolar to submicromolar binding affinities. In a surprising result, these uracil-based ligands are found not only to bind to the active site but also to bind to a second uncompetitive site. The weaker uncompetitive site suggests the existence of a transient binding site for uracil during the multistep extrahelical recognition mechanism. This very general inhibitor design strategy can be easily adapted to target other enzymes that recognize nucleobases, including other DNA repair enzymes that recognize other types of extrahelical DNA bases.     

Structural Landscape of the Transition from an ssDNA Dumbbell Plus Its Complementary Hairpin to a dsDNA Microcircle Via a Kissing Loop Intermediate

The experimental construction of a double-stranded DNA microcircle of only 42 base pairs entailed a great deal of ingenuity and hard work. However, figuring out the three-dimensional structures of intermediates and the final product can be particularly baffling. Using a combination of model building and unrestrained molecular dynamics simulations in explicit solvent we have characterized the different DNA structures involved along the process. Our 3D models of the single-stranded DNA molecules provide atomic insight into the recognition event that must take place for the DNA bases in the cohesive tail of the hairpin to pair with their complementary bases in the single-stranded loops of the dumbbell. We propose that a kissing loop involving six base pairs makes up the core of the nascent dsDNA microcircle. We also suggest a feasible pathway for the hybridization of the remaining complementary bases and characterize the final covalently closed dsDNA microcircle as possessing two well-defined U-turns. Additional models of the pre-ligation complex of T4 DNA ligase with the DNA dumbbell and the post-ligation pre-release complex involving the same enzyme and the covalently closed DNA microcircle are shown to be compatible with enzyme recognition and gap ligation.     

Additional base-pair formation in DNA duplexes by a double-headed nucleotide

We have designed and synthesised a double-headed nucleotide that presents two nucleobases in the interior of a dsDNA duplex. This nucleotide recognises and forms Watson-Crick base pairs with two complementary adenosines in a Watson-Crick framework. Furthermore, with judicious positioning in complementary strands, the nucleotide recognises itself through the formation of a T:T base pair. Thus, two novel nucleic acid motifs can be defined by using our double-headed nucleotide. Both motifs were characterised by UV melting experiments, CD and NMR spectroscopy and molecular dynamics simulations. Both motifs leave the thermostability of the native dsDNA duplex largely unaltered. Molecular dynamics calculations showed that the double-headed nucleotides are accommodated in the dsDNA by entirely local perturbations and that the modified duplexes retain an overall B-type geometry with the dsDNA unwound by around 25 or 60°, respectively, in each of the modified motifs. Both motifs can be accommodated twice in a dsDNA duplex without incurring any loss of stability and extrapolating from this observation and the results of modelling, it is conceivable that both can be multiplied several times within a dsDNA duplex. These new motifs extend the DNA recognition repertoire and may form the basis for a complete series of double-headed nucleotides based on all 16 base combinations of the four natural nucleobases. In addition, both motifs can be used in the design of nanoscale DNA structures in which a specific duplex twist is required.     

A Competitor-switched Electrochemical Sensor for Detection of DNA

A competitor‐switched electrochemical sensor based on a generic displacement strategy was designed for DNA detection. In this strategy, an unmodified single‐stranded DNA (cDNA) completely complementary to the target DNA served as the molecular recognition element, while a hairpin DNA (hDNA) labeled with a ferrocene (Fc) and a thiol group at its terminals served as both the competitor element and the probe. This electrochemical sensor was fabricated by self‐assembling a dsDNA onto a gold electrode surface. The dsDNA was pre‐formed through the hybridization of Fc‐labeled hDNA and cDNA with their part complementary sequences. Initially, the labeled ferrocene in the dsDNA was far from surface of the electrode, the electrochemical sensor exhibited a "switch‐off" mode due to unfavorable electron transfer of Fc label. However, in the presence of target DNA, cDNA was released from hDNA by target DNA, the hairpin‐open hDNA restored its original hairpin structure and the ferrocene approached onto the electrode surface, thus the electrochemical sensor exhibited a "switch‐on" mode accompanying with a change in the current response. The experimental results showed that as low as 4.4×10⁻¹⁰ mol/L target DNA could be distinguishingly detected, and this method had obvious advantages such as facile operation, low cost and reagentless procedure.     

Monitoring of single nicks in duplex DNA by gel electrophoretic mobility-shift assay

We demonstrate that the gel electrophoretic mobility-shift assay (EMSA) can be used for site-selective and quantitative monitoring of nicks in linear double-stranded DNA (dsDNA) thus allowing to expediently follow the nicking activity of enzymes or other agents targeted to a designated dsDNA site. At elevated temperature and/or in the presence of urea, DNA fragments carrying a single nick produced by the nicking enzyme N.BstNBI exhibit a well-detectable gel retardation effect. On the basis of permutation analysis, the decreased electrophoretic mobility of nicked dsDNA fragments is attributed to a bend (or hinge) in the DNA double helix sequence-specifically generated by a nick. Since nick-induced DNA bending depends on interaction between base pairs adjacent to a nick, the change in mobility is different for nicked DNA sites with different sequences. Therefore, EMSA monitoring of differential mobility change caused by nicks within various DNA sequences could be useful for studying the differential base stacking and nearest-neighbor energetics.     

Cytosine methylation regulates DNA bendability depending on the curvature

Cytosine methylation plays an essential role in many biological processes, such as nucleosome inactivation and regulation of gene expression. The modulation of DNA mechanics may be one of the regulatory mechanisms influenced by cytosine methylation. However, it remains unclear how methylation influences DNA mechanics. Here, we show that methylation has contrasting effects on the bending property of dsDNA depending on DNA curvature. We directly applied bending force on 30 base pairs of dsDNA using a D-shaped DNA nanostructure and measured the degree of bending using single-molecule fluorescence resonance energy transfer without surface immobilization. When dsDNA is weakly bent, methylation increases the stiffness of dsDNA. The stiffness of dsDNA increased by approximately 8% with a single methylation site for 30 bp dsDNA. When dsDNA is highly bent by a strong force, it forms a kink, i.e., a sharp bending of dsDNA. Under strong bending, methylation destabilizes the non-kink form compared with the kink form, which makes dsDNA near the kink region apparently more bendable. However, if the kink region is methylated, the kink form is destabilized, and dsDNA becomes stiffer. As a result, methylation increases the stiffness of weakly bent dsDNA and concurrently can promote kink formation, which may stabilize the nucleosome structure. Our results provide new insight into the effect of methylation, showing that cytosine methylation has opposite effects on DNA mechanics depending on its curvature and methylation location.

D-shaped DNA is used to observe dsDNA bending mechanics. Cytosine methylation increases the intrinsic stiffness of dsDNA. Under strong bending, methylation stabilizes or destabilizes a kink form depending on methylation sites.     

The application of β-cyclodextrin derivative functionalized aligned carbon nanotubes for electrochemically DNA sensing via host-guest recognition

We functionalized aligned carbon nanotubes (ACNTs) electrode with a new kind of β-cyclodextrin (β-CD) derivative through diazotization reaction. The resulting β-CD/ACNTs electrode was used to detect DNA hybridization in homogeneous solution based on host–guest recognition technology. In the sensing protocol, one special DNA probe was designed with a stem-loop structure and both ends modified, which we called dually labeled DNA probe (DLP). One end of the DLP was labeled with dabcyl as guest molecule for β-CD/ACNTs electrode capture, and the other end was labeled with a CdS nanoparticle as an electrochemical tag to indicate the occurrence of DNA hybridization. In the absence of the target DNA sequence, the DLP maintains its hairpin structure in solution phase and would not be captured and detected by the β-CD/ACNTs electrode. In the presence of the complementary target sequence, the conformational structure of the DLP was altered and a double-stranded DNA (dsDNA) molecule was formed by the hybridization of DLP and complementary DNA sequence. Consequently, the dsDNA was captured by the β-CD/ACNTs electrode owing to guest–host recognition between β-CD and dabcyl. The electrochemical signal from the CdS nanoparticle–dsDNA/β-CD/ACNTs was then measured. Under optimized detection conditions, the proposed method showed high sensitivity and selectivity with a detection limit of 5.0 × 10⁻¹³ M for complementary DNA sequence.