Single-mode plate flutter taking the boundary layer into account

The stability of an elastic plate in supersonic gas flow is investigated using asymptotic methods and taking the boundary layer formed on the plate surface into account. It is shown that the effect of the boundary layer can be of two types depending on its profile. In the case of generalized convex profiles (characteristic of accelerated flow) supersonic and subsonic plate oscillations are stabilized and destabilized, respectively. In the case of profiles with a generalized inflection point located in the subsonic part of the layer (characteristic of homogeneous and decelerated flows) supersonic perturbations are destabilized in the thin boundary layer and stabilized when the layer is fairly thick; subsonic perturbations are damped.     

Effect of gas compressibility on the stability of a boundary layer above a permeable surface at subsonic velocities

In the present study we investigate the stability of a boundary layer for the condition that the velocity perturbations at the permeable surface are nonzero. The stability for the boundary layer of an incompressible liquid in such a formulation was considered in [1]. For the case of subsonic velocities the effect of compressibility on the flow inside the boundary layer is weak, and in the present article this effect was neglected. The unsteady flow in narrow pores of a permeable covering depends strongly on the compressibility of the gas. Therefore, in the derivation of the relation connecting the pressure oscillations at the permeable surface with the oscillations of the flow through it, the effect of the compressibility was taken into consideration. It is shown that the boundary conditions, and therefore also the stability of the boundary layer at the permeable surface, depend considerably on the Mach number, even for a subsonic exterior flow.     

Experimental Investigation of the Development of Secondary Perturbations on a Swept Wing

The development of traveling secondary perturbations on streamwise structures in the swept wing boundary layer is investigated when the perturbations are excited by a periodic blowing-suction through an orifice on the model surface. The streamwise structures were generated by a roughness glued to the model surface. Qualitative and quantitative results on the development of the flow instability are obtained.     

Laminar boundary layer on an oscillating wedge

A study is made of the nonstationary laminar boundary layer on a sharp wedge over which a compressible perfect gas flows; the wedge executes slow harmonic oscillations about its front point. It is assumed that the perturbations due to the oscillations are small, and the problem is solved in the linear approximation. It is also assumed that the thickness of the boundary layer is small compared with the thickness of the complete perturbed region. Then in a first approximation the influence of the boundary layer on the exterior inviscid flow can be ignored, and the parameters on the outer boundary of the boundary layer can be taken equal to their values on the body for the case of inviscid flow over the wedge. They are determined from the solution to the inviscid problem that is exact in the framework of the linear formulation. The wall is assumed to be isothermal. The dependence of the viscosity on the temperature is linear. Under these assumptions, the problem of calculating the nonstationary perturbations in the boundary layer on the wedge is a self-similar problem.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 146–151, July–August, 1980.     

Interaction of a three-dimensional boundary layer with an extensive obstacle

A special variant is considered of the theory of longitudinal—transverse interaction in which the pressure field in the perturbed region of flow forms under the influence of centrifugal forces which lead to a change in the pressure across the boundary layer. This regime of flow is realized in flow of an incompressible fluid, when the two-dimensional boundary layer developing along the smooth section of the contour of a solid body enters into interaction with a three-dimensional irregularity on the surface around which flow is taking place, a projection or a depression. On the assumption that the height of the irregularity is not great, a solution is constructed for the linearized problem of interaction. It is shown that the properties of the flow of fluid in the region of interaction, in particular the possibility of penetration of perturbations into the boundary layer in front of an irregularity, depend on the sign of the curvature exhibited by the contour of the body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 39–48, January–February, 1988.     

Excitation of controllable perturbations in the three-dimensional boundary layer using plasma actuators

Two versions of the structure of a multi-discharge plasma actuator intended to excite boundary layer perturbations in the neighborhood of the leading swept-wing edge are suggested. The actuator must prevent from appearance and development of the crossflow instability modes leading to laminarturbulent transition under the normal conditions. In the case of flow past a swept wing, excitation of controllable perturbations by the plasma actuator is simulated numerically in the steady-state approximation under the typical conditions of cruising flight of a subsonic aircraft. The local body force and thermal impact on the boundary layer flow which is periodic along the leading wing edge is considered. The calculations are carried out for the physical impact parameters realizable in the near-surface dielectric barrier discharge.     

Interaction between the boundary layer and a supersonic flow when part of the wall is rapidly heated

There have been many theoretical studies of aspects of the unsteady interaction of an exterior inviscid flow with a boundary layer [1–9]. The mathematical flow models obtained in these studies by the method of matched asymptotic expansions describe a wide range of phenomena observed experimentally. These include boundary layer separation near the hinge of a flap, the flow in the neighborhood of the trailing edge of an oscillating airfoil [1–2], and the development and propagation of perturbations in a boundary layer excited by an oscillating wall or some other way [3–5]. The present paper studies the interaction of an unsteady boundary layer with a supersonic flow when a small part of the surface of a body in the flow is rapidly heated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 66–70, January–February, 1984.     

Tollmien-Schlichting Waves in a Hypersonic Boundary Layer Flow in the Neighborhood of a Cooled Surface

A nonlinear time-dependent model of the development of longwave perturbations in a hypersonic boundary layer flow in the neighborhood of a cooled surface is constructed. The pressure in the flow is assumed to be induced the combined variation of the thicknesses of the near-wall and main parts of the boundary layer. Numerical and analytic solutions are obtained in the linear approximation. It is shown that if the main part of the boundary layer is subsonic as a whole, its action reduces the perturbation damping upstream and the perturbation growth downstream, while a supersonic, as a whole, main part of the boundary layer creates the opposite effects. An analysis of the solutions obtained makes it possible to conclude that the asymptotic model proposed can describe the three-dimensional instability of the Tollmien-Schlichting waves.     

Asymptotic model of the development of separations inside a boundary layer under the action of a traveling pressure wave

A model of the nonlinear interaction between a pressure perturbation traveling at a constant velocity and an incompressible boundary layer is constructed when its near-wall part is described by the “inviscid boundary layer” equations. A steady-state solution is managed to obtain in the finite form under the assumption that it exists in a moving coordinate system. It is shown that the boundary layer can easily overcome pressure perturbations whose amplitude is not higher than the dynamic pressure calculated from the velocity of the pressure perturbation. At the higher pressure perturbation amplitudes a vortex sheet sheds from the body surface to the boundary layer. The vortex sheet represents an unstable surface of the tangential discontinuity which separates the regions of the direct and reverse separation flows. In the case of an arbitrary shape of the pressure perturbation the surface of the tangential discontinuity sheds from the body surface at a finite angle with the formation of a stagnation point. An example of the pressure perturbation in which the vortex sheet sheds from the body surface along the tangent is constructed.     

Receptivity of the Swept Wing Boundary Layer to a Steady Flow Inhomogeneity

The boundary layer on a plate with an inclined blunt leading edge is investigated for a free-stream flow with a small span-periodic velocity inhomogeneity. This flow simulates the penetration of the outer turbulence into the swept wing boundary layer. It is shown that the boundary layer perturbations generated by the inhomogeneity generally have a streamwise velocity component significantly greater than the initial inhomogeneity amplitude. The dependence of the perturbations on the distance from the leading edge and the spanwise inhomogeneity period is found. It is shown that the swept wing boundary layer is less sensitive to the perturbation type in question than the straight wing boundary layer.     

On asymptotic theory of separated flows past bodies

Symmetric two-dimensional steady flow past a body in a homogeneous incompressible fluid stream at high Reynolds numbers is considered. A slow motion in the reverse flow zone is investigated and the solution for the flow in the external region is obtained in the second approximation. Additional considerations of the fact that the flow in the closure region of the separation zone and in the wake behind this zone is turbulent are presented. The laminar-turbulent transition in the mixing layer is analyzed and an analogy between this process and the propagation of perturbations upstream of the boundary layer interaction regions is revealed.     

Propagation of perturbations upstream with interaction between a hypersonic flow and a boundary layer

It is shown that, for hypersonic flows with moderate and strong degrees of interaction, perturbations brought about, for example, by a bottom opening or by any other sort of obstacle are propagated up to the leading edge of a solid body. Local regions with very large pressure gradients cannot arise in the flow. This is connected with the possibility of the development of breakaway zones with a length on the order of magnitude of the size of the solid body, described in the first approximation by the equations of the boundary layer. From a mathematical point of view the problem comes down to establishing the nonsingular nature of the solution near the leading edge, and to finding eigensolutions which make it possible to satisfy the boundary conditions at the trailing edge of the solid body. It is shown that, with a weak interaction between the hypersonic flow and the boundary layer, there may arise short flow regions with free interaction and locally nonviscous flows with large pressure gradients, within the limits of which the perturbations may move upstream.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 40–49, July–August, 1970.In conclusion, the author thanks V. V. Sychev for his evaluation of the problem.     

Relaxation of a liquid layer under the action of capillary forces

The theory of creeping motion is used to study the relaxation of an infinite viscous fluid layer (membrane) of nonuniform thickness. The propagation of boundary perturbations in a semi-infinite layer under the action of surface-tension forces is also considered. The layer has at least one common boundary with a gas. It is found that relaxation processes of an infinite layer or the propagation of boundary perturbations inside a bounded layer are non-monotonic, and that wave-like surface perturbations always arise. Relaxation times are determined. Maximum distances are found over which separate regions of the layer can affect each other.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, Vol. 11, No. 1, pp. 73–77, January–February, 1970.The author wishes to thank V. G. Levich for discussions.     

采用不同黏性处理方法的宽无叶扩压器不稳定流动研究

径向无叶扩压器的全局稳定性可能受到核心主流失稳,出口回流与壁面边界层分离等因素影响,对于宽无叶扩压器,无黏核心主流与壁面边界层流动对不稳定扰动诱发的作用机理是当前研究的重点.本文首先通过数值计算获得了大宽度比孤立无叶扩压器平均流动,然后基于小扰动理论和周向均质假设,分别对欧拉方程与 Navier-Stokes 方程进行线性化,建立了基于无黏核心流动的稳定性分析方法,以及基于涡黏性与分子黏性的混合稳定性分析方法;通过与实验结果的对比,验证了混合稳定性分析方法预测所得流动失稳频率和全局直接模态的准确性;最后基于伴随方法获得了特征值的结构敏感性,揭示了不同黏性处理条件下宽无叶扩压器内全局不失稳扰动的源发区域.在只考虑核心主流的无黏条件下,宽无叶扩压器内流动不稳定扰动来源于流场中部,为二维的离心失稳;在同时考虑核心主流与边界层的作用时,宽无叶扩压器不稳定扰动不仅来源于扩压器流场中部的核心主流,壁面回流对于不稳定扰动的产生了重要影响.      

Interaction of a Traveling Pressure Perturbation with a Boundary Layer

The interaction between a traveling pressure perturbation and a laminar compressible boundary layer is investigated for a perturbation level higher than that needed to initiate steady-state flow separation. It is found that if the velocity of the pressure perturbation is fairly high the flow may remain unseparated and its direction of motion determines the nature of the perturbation propagation in the boundary layer. It is shown that even in the linear approximation the perturbations are mainly induced by the linear wall layer and not by the critical layer, which always remains nonlinear. It is also found that in the unsteady case shortwave perturbation oscillations are damped with time while the longwave ones grow and that the growth of the perturbations with time amplifies their damping along the streamwise coordinate while damping reduces it.     

Three-dimensional receptivity of boundary layers

The paper presents a review of results of some recent (mainly experimental) studies devoted to a quantitative investigation of the problem of receptivity of the 2D and 3D boundary layers with respect to various 3D (in general) external perturbations. The paper concentrates on the mechanisms of excitation and development of stationary and travelling instability modes in a 3D boundary layer on a swept wing, as well as in 2D boundary layers including the Blasius flow and a self-similar boundary layer with an adverse pressure gradient. In particular, the following problems of the boundary-layer receptivity are discussed: (i) receptivity to localized 3D surface roughness, (ii) receptivity to localized 3D surface vibrations, (iii) acoustic receptivity in presence of 3D surface roughness, and (iv) acoustic receptivity in the presence of 3D surface vibrations. All experiments described in the paper were conducted using controlled disturbance conditions with the help of simulation of the stationary and non-stationary perturbations by means of several disturbance generators. This approach gives us the possibility to obtain quantitative results which are independent of any uncontrolled background perturbations of the flow and the experimental model. In contrast to the data obtained at “natural” environmental conditions these results can be directly compared with calculations without any significant assumptions about the physical nature of the disturbances under investigation. The complex (amplitude and phase) coefficients of the boundary-layer receptivity to external perturbations, obtained as functions of the disturbance frequency and the spanwise wavenumber (or the wave propagation angle), represent the main results of the experiments described. These results can be used for the evaluation of the initial amplitudes and phases of the instability modes generated by various external perturbations, as well as for quantitative verification of linear receptivity theories. Several examples of the comparison of experimental results with calculations are also presented in this paper. A brief analysis of the state-of-art in the field is performed and some general properties of different receptivity mechanisms are discussed.     

Disturbance evolution in the leading-edge region of a blunt flat plate in supersonic flow

The spatio-temporal dynamics of small disturbances in viscous supersonic flow over a blunt flat plate at freestream Mach number M_∞=2.5 is numerically simulated using a spectral approximation to the Navier–Stokes equations. The unsteady solutions are computed by imposing weak acoustic waves onto the steady base flow. In addition, the unsteady response of the flow to velocity perturbations introduced by local suction and blowing through a slot in the body surface is investigated. The results indicate distinct disturbance/shock-wave interactions in the subsonic region around the leading edge for both types of forcing. While the disturbance amplitudes on the wall retain a constant level for the acoustic perturbation, those generated by local suction and blowing experience a strong decay downstream of the slot. Furthermore, the results prove the importance of the shock in the distribution of perturbations, which have their origin in the leading-edge region. These disturbance waves may enter the boundary layer further downstream to excite instability modes.     

Effect of nonisothermality of the surface of a thin profile on the stability of a laminar boundary layer

Investigations of the stability of a subsonic laminar boundary layer have shown that, other things being equal, the stability of the laminar flow is considerably improved by cooling the entire surface of the body to a constant temperature T_w=const lower than the temperature of the free stream [1–3]. This is attributable to an increase in the critical Reynolds number of loss of stability and a decrease in the range of unstable perturbations of the Tollmien-Schlichting wave type when the surface is cooled. Recently, in the course of investigating the stability of laminar flow over a flat plate it was found [4, 5] that a similar improvement in flow stability can be achieved by raising the temperature of a small part of the surface near the leading edge of the plate. In this study we examine the possibility of delaying the transition to turbulent flow by creating a nonuniform temperature distribution along the surface of thin profiles, where the development of an adverse pressure gradient in the outer flow has a destabilizing effect on the boundary layer.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 36–42, September–October, 1986.In conclusion, the authors wish to thank M. N. Kogan for useful discussions of their results.     

Stability of steady-state non-Newtonian fluid layer flow

The stability of the steady-state plane-parallel flow of a non-Newtonian fluid layer in the gravity field along an inclined rigid surface is investigated. It is shown that the most dangerous are the long-wave perturbations propagating over the free surface. The stability maps are plotted for such perturbations in the Reynolds number — gravity parameter plane. With increase in the gravity number the layer flow becomes less stable. The layer deviation from the vertical lines stabilizes the flow.