Bone fluoride in chronically uremic rats

The whole-body clearance of¹⁸F-fluoride injected intravenously into chronically uremic rats was found to proceed more slowly (7.6% of the dose in the first hour, vs 28%) and to a lesser total amount (18.5% vs 46.7%) in 4 hrs than in normal rats of the same age. The concentration of radiofluoride in the urine of uremies during the first hour was about 10% of that observed in normals. No changes in²⁴Na and⁴²K whole-body clearance rates were detected in this surgically-induced model of chronic uremia. Statistically significant elevations in central compartment fluoride concentrations were observed 4 hrs after injection. Fluorine and calcium in bones of uremic and normal animals were measured using Instrumental Neutron Activation Analysis techniques. The ratios μg F/mg Ca were highly significantly greater in uremics (2.2±0.3 vs 1.1±0.3). These differences were primarily brought about by elevations in bone fluoride rather than by decreases in calcium content of the uremic bone.     

Synthesis and optical properties of BaTiO3:Eu3+@SiO2 glass ceramic nano particles

BaTiO₃:(5 %)Eu³⁺ nanoparticles and BaTiO₃:(5 %)Eu³⁺@SiO₂ composites were synthesized by the solvothermal method. The effects on the structure, morphology and luminescent properties were studied using samples with different molar ratios of BaTiO₃:(5 %)Eu³⁺@SiO₂: 60:40, 50:50, 40:60, 30:70, 20:80, 10:90, 08:92, 6.5:93.5, 05:95, and 1.5:98.5. When the amount of silica in the composites was increased, the orange emission of Eu³⁺ increased, too; this was observed by exciting the charge transfer band centered at 283 nm. Furthermore, an increase in the intensity of the emission was obtained under excitation at 394 nm as a consequence of the improvement in the crystallinity of the samples. The presence of silica and the degree of crystallinity of the samples were determined through the Fourier transform infrared spectra and X-ray diffraction patterns. All of the results suggest that our ceramic material could be a good candidate for biomedical applications such as biolabeling, since the luminescence of BaTiO₃:(5 %)Eu³⁺@SiO₂ composites have an emission intensity higher than that of nanoparticles composed solely of BaTiO₃:Eu³⁺. This work demonstrates that BaTiO₃:Eu³⁺@SiO₂ composites have an emission intensity higher than that of nanoparticles composed solely of BaTiO₃:Eu³⁺.     

Study of interaction between nitrogen DBD plasma-treated viscose fibers and divalent ions Ca2+ and Cu2+

Viscose fibers were treated with atmospheric pressure dielectric barrier discharge (DBD) plasma obtained in nitrogen in order to activate the fiber surface prior to sorption of the divalent ions Ca²⁺ and Cu²⁺. Methylene blue sorption was used for estimation of carboxyl group formation on the surface after DBD plasma treatment, through the degree of fabric staining (K/S). Sorption of divalent ions was performed from solutions of each individual ion and from solutions of calcium and copper in succession onto untreated and plasma-treated viscose samples. The quantity of sorbed metal was determined from the neutralization and iodometric titration method. Scanning electron microscopy coupled with energy dispersive X-ray analysis was used for fiber morphology and surface characterization before and after plasma treatment, and after metal ions sorption. Experiments revealed copper microparticles formation on the fiber surface when sorption of copper was performed on samples with bonded calcium. Further analysis confirmed that for growth of copper particles, both calcium ions and nitrogen DBD plasma pretreatments are necessary.     

A sensor based on incorporating Ni2+ into ZnO nanoparticles-multi wall carbon nanotubes-poly methyl metacrylat nanocomposite film modified carbon paste electrode for determination of carbohydrates

The ZnO nanoparticles (ZnONPs) were synthesized with gelatin as stabilizer via the sol-gel method and were characterized by transmission electron microscope (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). An electrochemical sensor based on ZnO nanoparticles-multi wall carbon nanotubes-poly methyl metacrylat (ZnONPs-MWCNT-PMMA) composite film was developed by incorporating Ni²⁺ into the ZnONPs-MWCNT-PMMA film modified carbon paste electrode (Ni²⁺/ZnONPs-MWCNT-PMMA/CPE). The electrochemical activity of Ni²⁺/ZnONPs-MWCNT-PMMA/CPE was illustrated in 0.10 M NaOH using cyclic voltammetry. The Ni²⁺/ZnONPs-MWCNT-PMMA/CPE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple. Ni²⁺/ZnONPs-MWCNT-PMMA/CPE also show good electrocatalytic activity toward the oxidation of carbohydrates (glucose, fructose and sorbitol). The Ni²⁺/ZnONPs-MWCNT-PMMA/CPE gives a good linear range with a detection limit of 8, 6, and 9 μM towards the determination of glucose, fructose and sorbitol, respectively by amperometry. Furthermore, the modified sensor was successfully applied to the sensitive determination of carbohydrates in real samples.     

The Effect of O6+ and Si7+ ion beam irradiations on poly(lactide-co-glycolide) (50: 50) copolymer

Sterilization by ion beam radiations unfortunately also has a significant effect on the degradation of many polymers. The aim of present study is to examine the effect of heavy ion beam irradiation on poly(lactide-co-glycolide) (PLGA) (50: 50). The radiation effect is manifested through its degradation behavior and changes in the morphological, optical and structural properties. PLGA films are prepared by solvent casting method and subsequently irradiated with swift heavy ions O⁶⁺ and Si⁷⁺ ion with fluence in the range of 5 × 10¹⁰?1 × 10¹² ions/cm². The dominant effect on PLGA films is chain scission as evidenced by change in surface modification. Changes in optical and structural properties were analyzed by UV-Vis, XRD and FTIR spectrometric techniques. XRD technique is not responsive to degradation occurring in samples. Surface modifications caused by ion irradiations have been observed with SEM.     

Thermodynamics of the conversion of aqueous glucose to fructose

The thermodynamics of the conversion of aqueous glucose to fructose has been investigated using both heat conduction microcalorimetry and high pressure liquid chromatography (HPLC). The reaction was carried out in both aqueous TRIS/HCl buffer and in aqueous phosphate buffer in the pH range 7 to 8 using the enzyme glucose isomerase and the cofactors CoCl₂ and MgSO₄. The temperature range over which this reaction was investigated was 298.15 to 358.15 K (25–85°C). We have found that the enthalpy of reaction is independent of pH over the range 7 to 8. A combined analysis of both the HPLC and microcalorimetric data leads to the following results at 25°C: ΔG^o=349±53 J-mol^?1, ΔH^o=2780±200 J-mol^?1, and ΔC _p ^o =76±30 J-mol^?1-K^?1. The stated uncertainties are based upon an analysis of both the random and systematic errors inherent in the measurements. The temperature dependence of the equilibrium constant K for the process is expressed as $$RinK = - \frac{{349}}{{298.15}} + 2780(\frac{1}{{298.15}} - \frac{1}{T}) + 76(\frac{{298.15}}{T} - 1 + \ln \frac{T}{{298.15}})$$ Comparisons are made with literature data.     

Highly selective piezoelectric sensor for lead(II) based on the lead-catalyzed release of gold nanoparticles from a self-assembled nanosurface

A novel quartz crystal microbalance (QCM) sensor has been developed for highly selective and sensitive detection of Pb²⁺ by exploiting the catalytic effect of Pb²⁺ ions on the leaching of gold nanoparticles from the surface of a QCM sensor. The use of self-assembled gold nanoparticles (AuNPs) strongly enlarges the size of the interface and thus amplifies the analytical response resulting from the loss of mass. This results in a very low detection limit for Pb²⁺ (30 nM). The high selectivity is demonstrated by studying the effect of potentially interfering ions both in the absence and presence of Pb²⁺ ions. This simple and well reproducible sensor was applied to the determination of lead in the spiked drinking water. This work provides a novel strategy for fabricating QCM sensors towards Pb²⁺ in real samples. Figure

?     

The impact of immobilized metal affinity chromatography (IMAC) resins on DNA aptamer selection

DNA aptamers are single-stranded oligonucleotides which can form various secondary and tertiary structures. They can recognize a broad range of targets ranging from small molecules, such as ions, vitamins, antibiotics, to high molecular weight structures, including enzymes and antibodies. DNA aptamers are extensively studied as a potential source of new pharmaceutical drugs due to their inexpensive synthesis, low immunogenicity, and high specificity. The commonly used aptamer selection procedure is systematic evolution of ligands by exponential enrichment (SELEX) where the target molecule is immobilized on an appropriate chromatography resin. For peptide/protein targets, immobilized metal affinity chromatography (IMAC) resins are frequently used. There is a broad range of commercially available resins which can be used for IMAC. They are characterized by different metal ions, linker types, and bead materials. In this study, we tested the impact of different IMAC resins on the DNA aptamer selection process during eight SELEX cycles. A histidine-tagged 29 amino acid peptide corresponding to the interdomain connecting loop of human proliferating cell nuclear antigen was used as a selection target. Different resin materials containing the same metal ion (Co²⁺) were tested. Simultaneously, agarose resins containing identical linkers, but different metal ions (Co²⁺, Cu²⁺, Ni²⁺, and Zn²⁺) were analyzed. The results of this study clearly demonstrated the impact of the metal ion and resin material on the DNA aptamer selection progress. The presented data indicate that for successful IMAC resin-based SELEX, the determination of the optimal resin might be crucial.     

PET imaging of sterile inflammation with a 18F-labeled bis(zinc(II)-dipicolylamine) complex

Small-molecular probe ¹⁸F-labeled bis(zinc(II)-dipicolylamine) complex (¹⁸F-FB-DPAZn2) was evaluated for PET imaging of sterile inflammation. In comparison with ¹⁸F-2-deoxy-β-d-glucose (¹⁸F-FDG), ¹⁸F-radiolabeled Annexin V (¹⁸F-FB-Annexin V) showed rapid clearance of radioactivity from the kidney and low uptake in most tissues. Both the lower radioactivity accumulation in brain and heart and the higher uptakes in the lung, liver, and intestine were observed for the biodistribution of ¹⁸F-FB-DPAZn2. In PET imaging, ¹⁸F-FDG showed significantly higher tumor and inflammation uptake than did of ¹⁸F-FB-DPAZn2 and ¹⁸F-FB-Annexin V in the S-180 fibrosarcoma mouse model and sterile inflammation mouse model. Both ¹⁸F-FB-DPAZn2 and ¹⁸F-FB-Annexin V performed the specifically localization in inflammation, and the ratios of inflammatory lesion-to-muscle and tumor-to-muscle were 1.83 ± 0.20 and 0.90 ± 0.12 (P < 0.05) for ¹⁸F-FB-DPAZn2, and 1.51 ± 0.14 and 1.21 ± 0.12 (P > 0.05) for ¹⁸F-FB-Annexin V, respectively. Terminal deoxynucleotide end-labeling (TUNEL) assays performed on the dissected tissues showed the significantly more TUNEL-positive nuclei in the inflammatory muscle than in tumor and normal muscle, and these TUNEL results correlated with the uptake of ¹⁸F-FB-DPAZn2 in dissected tissues. Biodistribution and PET imaging studies showed that the ¹⁸F-FB-DPAZn2 is suitable for imaging sterile inflammation in vivo and is capable of the differentiating tumor from inflammation.     

Evaluation of natural gamma radiation and absorbed gamma dose in soil and rocks of Perambalur district (Tamil Nadu,India)

The activity concentrations and absorbed gamma dose of primordial radionuclides ²³⁸U, ²³²Th and ⁴⁰K were determined employing γ-ray spectrometry in 31 soil samples from the land area earmarked for house construction in Perambalur district and 14 rock samples from quarries that supply stones for the entire district. The soil samples registered relatively a higher mean value of 13.2 Bq kg^?1 for ²³⁸U, 66 Bq kg^?1 for ²³²Th and 340.3 Bq kg^?1 for ⁴⁰K as compared to mean values for rock samples (²³⁸U—8.0 Bq kg^?1; ²³²Th—65.1 Bq kg^?1; ⁴⁰K—199.1 Bq kg^?1). The mean absorbed gamma dose rate for soil (61.4 nGy h^?1) marginally exceeded the prescribed limit of 55 nGy h^?1 while, rocks registered the mean absorbed gamma dose rate of 10.4 nGy h^?1. The mean radium equivalent activity was distinctly higher in soil (130.6 Bq kg^?1) than in rock (20.0 Bq kg^?1). However, these values were lower than the limit (370 Bq kg^?1) set by OECD for building materials. It is evident from the data that the soil and rocks do not pose any radiological risk for house constructions in Perambalur district.     

The multielement potential of fast neutron cyclic activation analysis

Cyclic neutron activation analysis (CNAA), has, in recent years been developed as a useful analytical tool for the assay of short-lived isotopes in single element situations. The work described in this paper investigates the potential of the technique for composite samples having a wide range of elements that produce short-lived and long-lived isotopes on neutron irradiation. Accelerator-derived neutrons with average energies of 3 MeV, 6MeV and 14MeV were employed in what has been dubbed Fast Neutron Cyclic Neutron Activation Analysis (FNCAA). The approach to multi-element analysis entailed: (a) determination of cycle parameters in single element samples via the reactions²⁷Al(n, p)²⁷Mg (9.6 min,E =840keV), and¹³⁷Ba(n, n)^137mBa(2.3min,E =662keV), (b) a test of the method on a composite rock sample, (c) determination of analytical sensitivities using both powdered kale and rock standards and (d) a comparison of analytical results with other techniques. The results obtained in all these measurements are presented and discussed.     

Zn2+ doped ormosil–phosphotungstate hybrid films with enhanced photochromic response

Owing to the wide use of photochromic materials in UV sensors and dosimeters, considerable efforts have been made to increase the UV-response and sensitivity of the existing classes of photochromic materials. In this study, we report a simple sol–gel route for the preparation of highly photochromic transparent films based on ormosil–phosphotungstate hybrid materials. The effect of addition of Zn²⁺ ions on the photochromic response of these hybrid films and the possible mechanism involved is discussed. Compared to the undoped samples, the photochromic response of the Zn²⁺-doped hybrid films increases by 59–237 % depending on the concentration of Zn²⁺ ions added to the sol formulation. No structural or electronic change in the phosphotungstate dye was observed by vibrational spectroscopy or UV spectroscopy, though micro X-ray fluorescence (μ-XRF) analysis showed that the addition of Zn²⁺ in the sol–gel preparations leads to an increase in the amount of phosphotungstate (HPW) incorporated in the dip-coated films. Furthermore, TEM and nano-energy-dispersive X-ray showed formation of nano-agglomerates consisting of Zn and HPW in the Zn²⁺-doped samples. Zn K-edge X-ray absorption near edge structure analysis also confirmed the formation of the salt H_x[Zn(OH₂)₆] _2?xPW₁₂O₄₀. It is suggested that these Zn-phosphotungstate nano-agglomerates get trapped into the ormosil network during films preparation leading to increased concentration of the phosphotungstate anions in the films, in accordance with results from μ-XRF analysis. Raman spectroscopy confirmed that the Keggin structure of HPW is preserved in the hybrid films. FTIR spectra of the matrix part of the samples are identical before and after UV-irradiation, which suggests that the photochromic process does not involve oxidation of the organic functionalities. These highly photochromic hybrid films are promising candidates for the design of practical UV-sensing devices and dosimeters.     

Utilization of low-cost sorbent for removal and separation of 134Cs, 60Co and 152+154Eu radionuclides from aqueous solution

Eggshell material was used as low-cost and eco-friendly biosorbent for removal of ¹³⁴Cs, ⁶⁰Co and ^152+154Eu radionuclides from aqueous solution. The eggshell material was calcined at 500 and 800 °C, and then characterized. Comparative studies on the natural and calcined eggshell for sorption of the three radionuclides were carried out. It was found that, the uptake is in the order: Eu(III) > Co(II) > Cs(I). Further, column chromatography was used in separation of ¹³⁴Cs, ⁶⁰Co and ^152+154Eu using 0.15, 0.2 and 0.5 mol/l nitric acid, respectively. Eggshell material can be considered as a promising material for separation of radionuclides from radioactive waste solution.     

A direct hydrogen-1 and phosphorus-31 nuclear magnetic resonance cation solvation study of Al(ClO4)3, Ga(ClO4)3, In(ClO4)3, UO2(ClO4)2, and UO2(NO3)2 in water-acetone-dimethylsulfoxide and water-acetone-hexamethylphosphoramide mixtures

A competitive solvation study of Al(ClO₄)₃, Ga(ClO₄)₃, In(ClO₄)₃, UO₂(ClO₄)₂, and UO₂(NO₃)₂ in water-acetone-dimethylsulfoxide (DMSO) and water-acetone-hexamethylphosphoramide (HMPT) mixtures has been carried out by direct H¹ and P³¹ nuclear magnetic resonance (NMR) techniques. At low temperature, proton and ligand exchange are slow enough in these systems to permit the observation of signals for bulk and coordinated molecules of water and the organic bases (DMSO and HMPT). Both DMSO and HMPT compete effectively with water for coordination sites in the Al³⁺, Ga³⁺, and In³⁺ systems, with steric effects dominating the HMPT results. Both Al³⁺ and In³⁺ are able to bind a maximum of two to three HMPT molecules, for example. In contrast, UO²⁺ is solvated selectively by the organic molecules to the allowed maximum of 4 molecules per cation. H¹ and P³¹ NMR spectral results support the formation of only the mono-, tri-, and tetra-HMPT solvation complexes.     

Corrosion inhibition investigations of 3-acetylpyridine semicarbazone on carbon steel in hydrochloric acid medium

The corrosion inhibition efficiency of 3-acetylpyridine-semicarbazide (3APSC) on carbon steel (CS) in 1.0 M HCl solution has been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization studies. The results show that inhibition efficiency on metal increases with the inhibitor concentration. 3APSC exhibited marked inhibition towards carbon steel in HCl medium even at low concentrations. The adsorption of inhibitor on the surfaces of the corroding metal obeys the Langmiur isotherm and thermodynamic parameters (K _ads, ?G _ads ⁰ ) were calculated. Activation parameters of the corrosion process (E _a, ?H* and ?S*) were also calculated from the corrosion rates. Polarization studies revealed that 3APSC act as a mixed-type inhibitor. Surface analysis of the metal specimens was performed by scanning electron microscopy.     

Over-Expression of a Proline Specific Aminopeptidase from Aspergillus oryzae JN-412 and Its Application in Collagen Degradation

A strain that exhibited intracellular proline-specific aminopeptidase (PAP) activity was isolated from soy sauce koji and identified as Aspergillus oryzae JN-412. The gene coding PAP was cloned and efficiently expressed in Escherichia coli BL21 in a biologically active form. The highest specific activity reached 52.28 U mg^?1 at optimum cultivation conditions. The recombinant enzyme was purified 3.3-fold to homogeneity with a recovery of 36.7 % from cell-free extract using Ni-affinity column chromatography. It appeared as a single protein band on SDS-PAGE with molecular mass of approximately 50 kDa. The purified enzyme exhibited the highest activity at 60 °C and pH 7.5. The enzyme activity was inhibited by PMSF and ions like Zn²⁺ and Cu²⁺. DTT, β-mercaptoethanol, EDTA, and ions like Co²⁺, Mg²⁺, Mn²⁺, and Ca²⁺ had no influence on enzyme activity, whereas Ni²⁺ enhanced the enzyme activity. By using collagen as a substrate, the purified recombinant prolyl aminopeptidase contributed to the hydrolysis of collagen when used in combination with neutral protease, and free amino acids in collagen hydrolysates was significantly increased.     

Using amino acids for the chromatofocusing of metal ions on silica with bonded tetraethylenepentamine groups

Amino acid-based eluents are used for the chromatofocusing of metal ions on Tetren-SiO₂ chelating sorbent (silica with bonded tetraethylenepentamine groups) for the first time. The smoothest quasilinear pH gradients form for eluents based on glutamic and aspartic acids. The separation of Mn²⁺, Cr³⁺, Co²⁺, Ni²⁺, and Cu²⁺ is achieved.     

Magnetic molecularly imprinted polymer nanoparticles for the solid-phase extraction of paracetamol from plasma samples,followed its determination by HPLC

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were prepared from magnetite (Fe₃O₄) as the magnetic component, paracetamol as the template, methacrylic acid as a functional monomer, and 2-(methacrylamido) ethyl methacrylate as a cross-linker. The m-MIPs were then characterized by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction and vibrating sample magnetometry. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples. Following its elution from the column loaded with the m-MIPs with an acetonitrile-buffer (9:1) mixture, it was submitted to HPLC analysis. Paracetamol can be quantified by this method in the 1 μg L^?1 to 300 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.17 and 0.4 μg L^?1. The preconcentration factor of the m-MIPs is 40. The HPLC method shows good precision (4.5 % at 50 μg L^?1 levels) and recoveries (between 83 and 91 %) from spiked plasma samples. Figure

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples     

Kinetics of chlorine isotope exchange reaction between sodium chloride-36 and triphenyltin chloride in mixed solvents

Fluorine is an important trace element for life and human well-being. Food, in general, provides about 40 percent of the fluorine intake in the human body. In order to measure fluorine levels in human diet samples, Instrumental Neutron Activation Analysis (INAA) and Proton Induced Gamma-ray Emission (PIGE) analysis were used. Reactions¹⁹F(n,)²⁰F and¹⁹F(n, p)¹⁹O were employed for determination of the fluorine concentration using a reactor neutron spectrum and epithermal neutrons. Corrections were made for the sodium matrix interference caused by the²³Na(n, )²⁰F threshold reaction in the case of reactor neutron cyclic activation analysis and for the oxygen interference via¹⁸O(n, )¹⁹O reaction when using the epithermal cyclic NAA method. The fluorine content of the diet samples was also determined by PIGE analysis making use of the resonance reaction¹⁹F(p, )¹⁶O at 872 keV. Cyclic Neutron Activation Analysis (CNAA) when combined with mass fractionation was found to be the most suitable for determination of low concentration of fluorine, through the¹⁹F(n, )²⁰F reaction with a detection limit of 2.2 ppm in Bowen's Kale elemental standard.     

Fast atom bombardment combined with mass spectrometry for characterization of polycyclic aromatic hydrocarbons

A new approach using fast atom bombardment combined with mass spectrometry to characterize polycyclic aromatic hydrocarbons (PAHs) in the range of 128-252 u molecular weight is described. Sulfolane was employed as a liquid matrix for these π-conjugated hydrocarbons. Bombardment of sulfolane solution of certain PAHs with an atom beam produces both radical cation (M^+.) and protonated molecule [(M + H)⁺], with no evidence of fragmentation. Collisional activation of the fast atom bombardment-desorbed M^+. ions, however, results in several structure-specific fragment ions. Structural differences in a few isomeric hydrocarbons can be detected using the [(M + H)⁺]/[M^+.] abundance ratio and in the pyrene-fluoranthene pair by the B/E linked-field-collision-activated dissociation data. The [(M + H)⁺]/[M^+.] was found to be compound-specific and correlated well with certain properties (resonance energy, proton affinity, and ionizing energy) of PAHs.