Numerical simulation of stabilization of the boundary layer on a surface with a porous coating in a supersonic separated flow

Stability of a supersonic (M _∞ = 5.373) boundary layer with local separation in a compression corner with a passive porous coating partly absorbing flow perturbations is considered by solving two-dimensional Navier-Stokes equations numerically. The second mode of disturbances of a supersonic boundary layer is demonstrated to be the most important one behind the boundary-layer reattachment point. The possibility of effective stabilization of these disturbances behind the reattachment point with the use of porous coatings is confirmed. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 2, pp. 39–47, March–April, 2007.     

Flow stability in a channel with porous walls

We study the stability of the flow which forms in a plane channel with influx of an incompressible viscous fluid through its porous parallel walls. Under certain assumptions the study of the stability reduces to the solution of modified Orr-Sommerfeld equation accounting for the transverse component of the main-flow velocity. As a result of numerical integration of this equation we find the dependence of the local critical Reynolds number on the blowing Reynolds number R₀, which may be defined by two factors: the variation of the longitudinal velocity profile with R₀ and the presence of the transverse velocity component. A qualitative comparison is made of the computational results with experimental data on transition from laminar to turbulent flow regimes in channels with porous walls, which confirms that it is necessary to take into account the effect of the transverse component of the main-flow velocity on the main-flow stability in the problem in question.Flows in channels with porous walls are of interest for hydrodynamic stability theory in view of the fact that they can be described by the exact solutions of the Navier-Stokes equations by analogy with the known Poiseuille and Couette flows. However, in contrast with the latter, the flows in channels with porous walls (studies in [1], for example) will be nonparallel.The theory of hydrodynamic stability of parallel flows has frequently been applied to nonparallel flows (in the boundary layer, for example). In so doing the nonparallel nature of the flow has been taken into account only by varying the longitudinal velocity component profiles. A study was made in [2, 3] of the effect of the transverse component of the main flow on its stability. In the case of the boundary layer in a compressible gas, a considerable influence of the transverse velocity component on the critical Reynolds number was found in [2] and confirmed experimentally. A strong influence of the transverse velocity component on the instability region was also found in [3] in a study of the flow stability in a boundary layer with suction for an incompressible fluid.     

Verification of parabolized stability equations for its application to compressible boundary layers

Parabolized stability equations (PSE) were used to study the evolution of disturbances in compressible boundary layers.The results were compared with those ob- tained by direct numerical simulations (DNS),to check if the results from PSE method were reliable or not.The results of comparison showed that no matter for subsonic or supersonic boundary layers,results from both the PSE and DNS method agreed with each other reasonably well,and the agreement between temperatures was better than those between velocities.In addition,linear PSE was used to calculate the neutral curve for small amplitude disturbances in a supersonic boundary layer.Compared with those obtained by linear stability theory (LST),the situation was similar to those for incom- pressible boundary layer.     

Evolution of disturbances in a laminarized supersonic boundary layer on a swept wing

Experimental data on stability of a three-dimensional supersonic boundary layer on a swept wing are presented. The experiments are performed on a swept wing model with a lenticular profile with a 40° sweep angle of the leading edge at a zero angle of attack. The supersonic boundary layer on the swept wing was laminarized with the use of distributed roughness. A pioneering study of interaction of traveling and stationary disturbances is performed. Some specific features of this interaction are identified. The main reason for turbulence emergence in a supersonic boundary layer on a swept wing is demonstrated to be secondary crossflow instability. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 2, pp. 40–46, March–April, 2008.     

Excitation by sound of Tollmien-Schlichting waves in a supersonic boundary layer

The interaction of sound with a supersonic boundary layer is considered. Because of the dependence of the main flow on the longitudinal coordinate, a sound wave generates unstable oscillations within the boundary layer. Calculations made for Mach number M = 2.0 and dimensionless frequency 2πfv_e/U_e ² = 0.91·10^?4 showed that near the lower branch of the curve of neutral stability a Tollmien—Schlichting wave can be excited with an intensity 2–3 times greater than that of the external acoustic wave.     

Problem of Optimal Control of the Turbulent Boundary Layer on a Permeable Surface in Supersonic Gas Flow

The problem of constructing the law of distribution of the normal component of the velocity of blowing to the turbulent boundary layer at supersonic flow velocities which ensure the minimum convective heat flow transmitted from the boundary layer to the surface is considered. The power of the control system calculated with regard to Darcy’s law of flow through a porous medium acts as the isoperimetric condition. The problemis solved using the Dorodnitsyn generalized integral relations. The numerical experiments carried out in the case of flow past a sphere showed the effectiveness of the optimal blowing laws as compared with the uniform law, namely, the gain in the minimized functional reaches 31.82%.     

Tangential gas blowing and boundary layer stability of a compressible gas

The effect of distributed blowing of a gas mass through a porous surface on the stability characteristics of a supersonic boundary layer is studied at a moderate supersonicMach numberM= 2. Tangential blowing when only the U-component of the mean velocity is not equal to zero on the wall is considered. The effect of the porous surface parameters on vortex perturbations is investigated and a comparison with the variant of the so-called “cutoff” regime is carried out. Different-density gas blowing is simulated by means of variation of the temperature factor (wall heating or cooling), namely, blowing of a heavy gas is simulated via blowing of a cold gas and vice versa.     

Investigation of the effect of heavy gas injection into a supersonic boundary layer on laminar-turbulent transition

The effect of distributed tangential injection of heavy SF₆ gas into the wall zone of a boundary layer on the supersonic flow stability and laminar-turbulent transition is experimentally and theoretically investigated at the freestream Mach number M_∞ = 2. For the first time it is experimentally shown that in the case of this injection laminar-turbulent transition is downstream displaced.     

Ignition of hydrogen in a turbulent boundary layer on a plate

The ignition of hydrogen blown into a turbulent supersonic boundary layer on a flat plate is investigated numerically. It is assumed that the mixture consists of six chemically active components H, O, OH, H₂O, O₂, H₂ and inert nitrogen N₂. The boundary layer is divided into outer and inner regions, for which different expressions for the coefficients of turbulent transport are used. The influence of pulsations on the rates of the chemical reactions, and also the back reaction of the chemical processes on the mechanism of turbulent transfer are not taken into account. The surface of the plate is assumed to be absolutely catalytic with respect to the recombination reactions of the H and O atoms. The influence of the blowing intensity, the Mach number in the outer flow, and the pressure on the ignition delay is analyzed. The possibility of effective porous cooling of the surface when there is combustion in the boundary layer is demonstrated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 33–40, November–December, 1979.I thank V. G. Gromov and V. A. Levin for their interest in the work.     

Investigation by experiment and calculation of a supersonic stream adjacent to a wall in an accompanying supersonic flow

In well-known papers devoted to the investigation of supersonic streams adjacent to a wall, the authors, as a rule, restrict themselves to the case of a subsonic blast. In the present paper we determine the velocity field and the concentration field of an admixture of helium in a plane supersonic stream of air (M₁=2.18), propagating along a surface in an accompanying supersonic flow of air (M₂=2.7 and 3.8). In the boundary layer approximation a numerical calculation is made of the non-self-similar isobaric flow, using the equation for the turbulent viscosity [1] as the closing relationship. Results of the calculation are compared with experimental data.Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 25–32, July–August, 1972.     

Stability of a supersonic boundary layer with respect to three-dimensional disturbances

The stability of a supersonic boundary layer over an intensively cooled plate with respect to three-dimensional disturbances is investigated. Two neutral stability curves, the existence of which was established in [1], are contemplated. It is shown by asymptotic analysis that each of these two neutral stability curves separates into a closed and an ordinary neutral curve in a certain range of disturbance propagation angles. As the surface is cooled, the closed neutral curve contracts to a point. The results of asymptotic analysis were confirmed by numerical integration of the stability equations.     

Effect of Heat Supply on the Stability of the Supersonic Swept Atiachment-Line Boundary Layer

The stability of a boundary layer with volume heat supply on the attachment line of a swept wing is investigated within the framework of the linear theory at supersonic inviscid-free-stream Mach numbers. The results of numerical calculations of the flow stability and neutral curves are presented for the flow on the leading edge of a swept wing with a swept angle χ=60° at various free-stream Mach numbers. The effect of volume heat supply on the characteristics of boundary layer stability on the attachment line is studied at a surface temperature equal to the temperature of the external inviscid flow. It is shown that in the case of a supersonic external inviscid flow volume heat supply may result in an increase in the critical Reynolds number and stabilization of disturbances corresponding to large wave numbers. For certain energy supply parameters the situation is reversed, the unstable disturbances corresponding to the main flow-instability zone are stabilized but another zone of flow-instability with small wave numbers and a significantly lower critical Reynolds number appears.     

Growth of artificially induced disturbances in a supersonic boundary layer

This work proposes a method of inducing artificial disturbances of adjustable amplitude in a supersonic boundary layer. Using the proposed method, an experimental study is made of the development of a three-dimensional wave packet of low intensity at a frequency of 20 kHz in the boundary layer of a flat plate at Mach number M = 2.0. The Fourier components of the wave packet are determined. The data obtained are compared with the results of calculating the linear stability of the supersonic boundary layer in a plane-parallel flow approximation.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 37–43, September–October, 1984.     

Experimental study of the effect of a passive porous coating on disturbances in a hypersonic boundary layer 2. Effect of the porous coating location

The effect of the location of a passive porous coating on natural disturbances in a hypersonic boundary layer is studied experimentally. The experiments are performed in the flow around a sharp cone aligned at a zero angle of attack with the free-stream Mach number M_∞ = 5.8, stagnation temperature T ₀ = 370 ± 5 K, and unit Reynolds numbers Re_1∞ = 2.6 · 10⁶, 4.6 · 10⁶, 6.6 · 10⁶, and 10⁷ m^?1. The wave characteristics of the boundary layer are calculated with the use of the linear stability theory for flow parameters corresponding to experimental values. A comparison of experimental and predicted results shows that the presence of a porous coating in the region where the second mode is unstable leads to reduction of its amplitude at the measurement point, whereas the presence of a porous coating in the region of second mode stability leads to enhancement of the amplitude.     

Single-mode plate flutter taking the boundary layer into account

The stability of an elastic plate in supersonic gas flow is investigated using asymptotic methods and taking the boundary layer formed on the plate surface into account. It is shown that the effect of the boundary layer can be of two types depending on its profile. In the case of generalized convex profiles (characteristic of accelerated flow) supersonic and subsonic plate oscillations are stabilized and destabilized, respectively. In the case of profiles with a generalized inflection point located in the subsonic part of the layer (characteristic of homogeneous and decelerated flows) supersonic perturbations are destabilized in the thin boundary layer and stabilized when the layer is fairly thick; subsonic perturbations are damped.     

Effect of distributed gas injection on aerodynamic characteristics of a body of revolution in a supersonic flow

Results of experimental and numerical investigations of the effect of gas injection through a permeable porous surface on the drag coefficient of a cone-cylinder body of revolution in a supersonic flow with the Mach number range M _h = 3–6 are presented. It is demonstrated that gas injection through a porous nose cone with gas flow rates being 6–8% of the free-stream flow rate in the mid-section leads to a decrease in the drag coefficient approximately by 5–7%. The contributions of the decrease in the drag force acting on the model forebody and of the increase in the base pressure to the total drag reduction are approximately identical. Gas injection through a porous base surface with the flow rate approximately equal to 1% leads to a threefold increase in the base pressure and to a decrease in the drag coefficient. Gas injection through a porous base surface with the flow rate approximately equal to 5% gives rise to a supersonic flow zone in the base region.     

Development of slow disturbances in a hypersonic boundary layer

The mechanisms of development of slow time-dependent disturbances in the wall region of a hypersonic boundary layer are established and a diagram of the disturbed flow patterns is plotted; the corresponding nonlinear boundary value problem is formulated for each of these regimes. It is shown that the main factors that form the disturbed flow are the gas enthalpy near the body surface, the local viscous-inviscid interaction level, and the type, either subsonic or supersonic, of the boundary layer as a whole. Numerical and analytical solutions are obtained in the linear approximation. It is established that enhancement of the local viscous-inviscid interaction or an increased role for the main supersonic region of the boundary layer makes the disturbed flow by and large “supersonic”: the upstream propagation of the disturbances becomes weaker, while their downstream growth is amplified. Contrariwise, local viscous-inviscid interaction attenuation or an increased role for the main subsonic region of the boundary layer has the opposite effect. Surface cooling favors an increased effect of the main region of the boundary layer while heating favors an increased wall region effect. It is also found that in the regimes considered disturbances travel from the turbulent flow region downstream of the disturbed region under consideration counter to the oncoming flow, which may be of considerable significance in constructing the nonlinear stability theory.     

Joint permeability and roughness effect on the supersonic flat-plate boundary layer stability and transition

The joint effect of the permeability and the roughness of the flat plate surface on the boundary layer stability and laminar-turbulent transition is experimentally and theoretically investigated at the freestream Mach number M_∞ = 2. It is shown that, as a certain roughness value is reached, and with increase in the porous coating thickness (on a certain range), the boundary layer stability against natural disturbances diminishes and laminar-turbulent transition is displaced toward the leading edge of the model.     

Three-Wave Interactions of Disturbances in a Supersonic Boundary Layer

Within the framework of the weakly nonlinear stability theory, group interaction of disturbances in a supersonic boundary layer is considered. The disturbances are represented by two spatial packets of traveling instability waves (wave trains) with multiple frequencies. The possibility of energy redistribution in such wave systems in the case of three-wave resonant interactions of packet constituents is considered. The model is used to test the dynamics of unstable waves arising due to introduction of controlled high-intensity disturbances into a supersonic boundary layer. It is found that this mechanism is not the main one for the features of streamwise dynamics of such nonlinear waves being observed.     

Numerical modeling of the receptivity of a supersonic boundary layer to acoustic disturbances

The receptivity of a supersonic (M_∞ = 6) boundary layer on a flat plate to acoustic disturbances is investigated on the basis of a numerical solution of the 2D Navier-Stokes equations. Numerical results obtained for fast and slow acoustic waves impinging on the plate at zero angle agree qualitatively with asymptotic theory. Calculations carried out for other angles of incidence of the acoustic waves reveal new features of the perturbation field in the neighborhood of the leading edge of the plate. It is shown that, due to visco-inviscid interaction, the shock formed near the leading edge may significantly affect the acoustic field and the receptivity.