Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Kinetics of the borate anion catalyzed oxidation of diethyl sulfide with hydrogen peroxide in an <Emphasis Type="Italic">i</Emphasis>-PrOH–H<Subscript>2</Subscript>O medium

It was found that in a wide range of pH in the presence of boric acid the oxidation of diethyl sulfide (Et₂S) with hydrogen peroxide in an i-PrOH–H₂O medium occurs with the participation of H₂O₂, HOO^–, monoperoxo-(B(OH)₃OOH^–), and diperoxoborates (B(OH)₂(OOH)₂⁻). The stability constants of peroxoborates and the rate constants for the reactions of H₂O₂, HOO⁻, B(OH)₃(OOH)₂⁻, and B(OH)₂(OOH)₂⁻ with Et₂S under these conditions were determined.     

Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Synthesis and structure of the polymeric complex [Ag<Subscript>2</Subscript>(Ph<Subscript>3</Subscript>P)<Subscript>2</Subscript>B<Subscript>10</Subscript>H<Subscript>10</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

A method for the synthesis of the silver(I) complex with the closo-decaborate anion and triphenylphosphine [Ag₂(Ph₃P)₂B₁₀H₁₀] _n was developed and the structure of this complex was studied. The polymeric chain of the complex is formed with participation of Ag(I) atoms, which coordinate the B₁₀H₁₀²⁻ anions through the apical (B(1)–B(2), B(9)–B(10)) and equatorial (B(3)–B(6), B(5)–B(8)) edges, the metalligand bonding occurring through three-center two-electron bonds (MHB). The P atoms of two triphenylphosphine molecules are also incorporated in the inner coordination sphere of the metal: the CN of the silver atom is 4 + 1.     

Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.     

Cuboidal oxalate cluster complexes with the Mo<Subscript>3</Subscript>CuQ<Subscript>4</Subscript><Superscript>5+</Superscript> cluster core (Q = S or Se): synthesis,structure, and electrochemical properties

The reactions of the [Mo₃(μ₃-Q)(μ₂-Q)₃(H₂O)₃(C₂O₄)₃]²⁻ complex (Q = S or Se) with CuX salts (X = Cl, Br, I, or SCN) in water produce the cuboidal heterometallic clusters [Mo₃(CuX)(μ₃-Q)₄(H₂O)₃(C₂O₄)₃]²⁻, which were isolated as the potassium and tetraphenylphosphonium salts. Two new compounds, K₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·6H₂O and (PPh₄)₂[Mo₃(CuBr)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O, were structurally characterized. All compounds were characterized by elemental analysis and IR spectroscopy. The K₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] compound was characterized by the ⁷⁷Se NMR spectrum; the (PPh₄)₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃], (PPh₄)₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] and K₂[Mo₃(CuSCN)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O compounds, by electrospray mass spectra. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1639–1644, September, 2007.     

Hydrothermal Syntheses and Crystal Structures of Two New Heteropolyoxovanadoborates Containing {(VO)<Subscript>12</Subscript>O<Subscript>6</Subscript>[B<Subscript>3</Subscript>O<Subscript>6</Subscript>(OH)]<Subscript>6</Subscript>(H<Subscript>2</Subscript>O)} Cluster

Two new heteropolyoxovanadoborates (H₂dap)₂H₆{(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}·13H₂O (1, dap = 1,2-diaminopropane) and {[Zn(dien)]₂[Zn(dien)(H₂O)]₄(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)}₂·15H₂O (2, dien = diethylenetriamine) have been hydrothermally synthesized and structurally characterized. Both 1 and 2 contain {(VO)₁₂O₆[B₃O₆(OH)]₆(H₂O)} cluster (denoted on V₁₂B₁₈), which is constructed by a puckered B₁₈O₃₆(OH)₆ ring sandwiched between two triangles of six alternating cis and trans edge-sharing vanadium atoms, and a central water molecule. 1 consists of discrete [V₁₂B₁₈]¹⁰⁻ cluster anions with H₂dap²⁺ as counterions, while 2 consists of discrete neutral {[Zn(dien)]₂[Zn(dien)(H₂O)]₄[V₁₂B₁₈]} clusters, which are built from two types of zinc(II) complex fragments connecting with V₁₂B₁₈ cluster through two Zn-(μ ₃-O)-B bonds. Interestingly, 2 is the only example of the V₁₂B₁₈ cluster decorated by two types of zinc(II) complex fragments.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Kinetic studies on the hydrogenation of nitrate in water using Rh/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Rh-Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Liquid-phase reduction NO ₃ ⁻ using monometallic and bimetallic catalysts (5% Rh/Al₂O₃, 5% Rh-0.5% Cu/Al₂O₃, 5% Rh-1.5% Cu/Al₂O₃, 5% Rh-5% Cu/Al₂O₃ and a physical mixture of 5% Rh/Al₂O₃ and 1.5% Cu/Al₂O₃) was studied in a slurry reactor operating at atmospheric pressure. Kinetic measurements were performed for a low concentration of nitrate (0.4 × 10⁻³−3.2 × 10⁻³ mol dm⁻³) and the temperature range 293–313 K. From the experimental data, it was found that the reduction of nitrate is first order with respect to nitrate. On the basis of the rate constants, the apparent activation energy was established using a graphic method. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 881–886. This article was submitted by the authors in English.     

Dinuclear complex of gold(III) with 1,3-diaminopropane (HL), [Au<Subscript>2</Subscript>(HL)(L)<Subscript>2</Subscript>](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>(OH): Synthesis and crystal and molecular structures

The dinuclear gold(III) complex, [Au₂(HL)(L)₂](ClO₄)₃(OH) (I) (HL = 1,3-diaminopropane), with two amide bridges has been synthesized for the first time. According to the X-ray diffraction data, the crystal structure of complex I consists of the complex cations [Au₂(HL)(L)₂]⁴⁺ and anions ClO₄⁻ and OH⁻. The coordination sites AuN₄ are insignificantly distorted squares. In the four-membered ring Au₂N₂, the gold atoms are bound by the bridging nitrogen atoms of the deprotonated primary amine.     

Ionic conductivity of bismuth oxofluoride BiO<Subscript>0.1</Subscript>F<Subscript>2.8</Subscript> with tysonite-type structure (LaF<Subscript>3</Subscript>)

The complex impedance method in the temperature range of 291–660 K was used to study conductivity of oxofluoride BiO_0.1F_2.8 belonging to the tysonite structural type (LaF₃). Bismuth oxofluoride was synthesized using a solid-phase method at 770–870 K for 1–2 h in an argon atmosphere. Heterovalent substitution of fluoride ions F⁻ by oxygen ions O²⁻ in the anionic BiF₃ matrix sublattice results in high ionic conductivity (∼0.1 S/cm at 660 K) of BiO_0.1F_2.8 ceramic samples.     

Synthesis,structure and thermal decomposition of [Ni(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>][VO(O<Subscript>2</Subscript>)<Subscript>2</Subscript>(NH<Subscript>3</Subscript>)]<Subscript>2</Subscript>

The compound [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ was prepared and characterized by elemental analysis and vibrational spectra. The single crystal X-ray study revealed that the structure consists of [Ni(NH₃)₆]²⁺ and [VO(O₂)₂(NH₃)]⁻ ions. As a result of weak interionic interactions V′···O_p (O_p-peroxo oxygen), ([VO(O₂)₂(NH₃)]⁻)₂ dimers are formed in the solid-state. The thermal decomposition of [Ni(NH₃)₆][VO(O₂)₂(NH₃)]₂ is a multi-step process with overlapped individual steps; no defined intermediates were obtained. The final solid products of thermal decomposition up to 600°C were Ni₂V₂O₇ and V₂O₅.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Synthesis,X-ray studies,spectroscopic investigation,and DFT calculations of [ReBr<Subscript>3</Subscript>(dppt)(OPPh<Subscript>3</Subscript>)]

The reaction of [ReOBr₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReBr₃(dppt)(OPPh₃)] has been obtained. It was characterised by IR, UV–Vis spectroscopy, magnetic measurements, and X-ray crystallography. The electronic structure of [ReBr₃(dppt)(OPPh₃)] has been studied by DFT/B3LYP level calculations, and TDDFT calculations were employed for discussion of its electronic spectrum in more detail. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

Aqueous sol–gel processing of precursor oxides for ZrW<Subscript>2</Subscript>O<Subscript>8</Subscript> synthesis

This paper describes the synthesis of ZrW₂O₈ by the use of an aqueous citrate-gel method in order to prepare a fine, pure and homogeneous oxide mixture suitable for ceramic processing. The thermal expansion coefficient thus obtained for α-ZrW₂O₈ is −10.6 × 10⁻⁶ °C⁻¹ (50–125 °C) whereas for the β-ZrW₂O₈ a value of −3.2 × 10⁻⁶ °C⁻¹ (200–300 °C) is obtained. The advantages of the use of a sol–gel method is expressed in the very homogeneous end-products. The paper describes crystallographic data, morphological structure and the thermal expansion properties of the ZrW₂O₈ material. Moreover, photoluminescence and photochromic properties specific to the precursor gel are described and analyzed. These effects support our views that the precursors show homogeneity up to nanometer level.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.