On the effects of a periodic, spanwise variation of suction upon asymptotic suction flow

Summary The effects of superposing streamwise vorticity, periodic in the lateral direction, upon two-dimensional asymptotic suction flow are analyzed. Such vorticity, generated by prescribing a spanwise variation in the suction velocity, is known to play an important role in unstable and turbulent boundary layers. The flow induced by the variation has been obtained for a freestream velocity which (i) is steady, (ii) oscillates periodically in time, (iii) changes impulsively from rest. For the oscillatory case it is shown that a frequency can exist which maximizes the induced, unsteady wall shear stress for a given spanwise period. For steady flow the heat transfer to, or from a wall at constant temperature has also been computed.Nomenclature (x, y, z) spatial coordinates - (u, v, w) corresponding components of velocity - (, , ) corresponding components of vorticity - t time - stream function for v and w - v _w mean wall suction velocity - nondimensional amplitude of variation in wall suction velocity - characteristic wavenumber for variation in direction of z - T temperature - P pressure - density - coefficient of kinematic viscosity - coefficient of thermal diffusivity - (/v _w)² - frequency of oscillation of freestream velocity - nondimensional amplitude of freestream oscillation - /v _w ² - z z - y –v _w y/ - v _w ² t/4 - /v _w - U ₀ characteristic freestream velocity - u/U ₀ - coefficient of viscosity - _w wall shear stress - Prandtl number (/) - q heat transfer to wall - T _w wall temperature - T (T _w–T)/(T _w–)     

Investigations of mean and turbulent flow characteristics of a two dimensional plane diffuser

This paper reports the investigation of mean and turbulent flow characteristics of a two-dimensional plane diffuser. Both experimental and theoretical details are considered. The experimental investigation consists of the measurement of mean velocity profiles, wall static pressure and turbulence stresses. Theoretical study involves the prediction of downstream velocity profiles and the distribution of turbulence kinetic energy using a well tested finite difference procedure. Two models, viz., Prandtl's mixing length hypothesis and k- model of turbulence, have been used and compared. The nondimensional static pressure distribution, the longitudinal pressure gradient, the pressure recovery coefficient, percentage recovery of static pressure, the variation of U _max/U _bar along the length of the diffuser and the blockage factor have been valuated from the predicted results and compared with the experimental data. Further, the predicted and the measured value of kinetic energy of turbulence have also been compared. It is seen that for the prediction of mean flow characteristics and to evaluate the performance of the diffuser, a simple turbulence model like Prandtl's mixing length hypothesis is quite adequate.List of symbols C ₁ , C ₂ ,C turbulence model constants - F _x body force - k kinetic energy of turbulence - l _m mixing length - L length of the diffuser - u, v, w rms value of the fluctuating velocity - u, v, w turbulent component of the velocity - mean velocity in the x direction - _A average velocity at inlet - U _bar average velocity in any cross section - U _max maximum velocity in any cross section - V mean velocity in the y direction - W local width of the diffuser at any cross section - x, y coordinates - dissipation rate of turbulence - _m eddy diffusivity - Von Karman constant - mixing length constant - _l laminar viscosity - _eff effective viscosity - v kinematic viscosity - density - _k effective Schmidt number for k - effective Schmidt number for - stream function - non dimensional stream function     

Unsteady convective diffusion in a rotating parallel plate channel

The paper presents an exact analysis of the dispersion of a passive contaminant in a viscous fluid flowing in a parallel plate channel driven by a uniform pressure gradient. The channel rotates about an axis perpendicular to its walls with a uniform angular velocity resulting in a secondary flow. Using a generalized dispersion model which is valid for all time, we evaluate the longitudinal dispersion coefficientsK _i (i=1, 2, ...) as functions of time. It is shown thatK ₁=0 andK ₃,K ₄, ... decay rapidly in comparison withK ₂. ButK ₂ decreases with increasing (the dimensionless rotation parameter) for values of upto approximately =2.2. ThereafterK ₂ increases with further increase in and its value gets saturated for large values of (say, 500) and does not change any further with increase in . A physical explanation of this anomalous behaviour ofK ₂ is given.

---

Instationäre konvektive Diffusion in einem rotierenden Parallelplattenkanal

Zusammenfassung In dieser Untersuchung wird eine exakte Analyse der Ausbreitung eines passiven Kontaminierungsstoffes in einer zähen Flüssigkeit gegeben, die, befördert durch einen gleichförmigen Druckgradienten, in einem Parallelplattenkanal strömt. Der Kanal rotiert mit gleichförmiger Winkelgeschwindigkeit um eine zu seinen Wänden senkrechte Achse, wodurch sich eine Sekundärströmung ausbildet. Unter Verwendung eines generalisierten, für alle Zeiten gültigen Dispersionsmodells werden die longitudinalen DispersionskoeffizientenK _i (i=1, 2, ...) als Funktionen der Zeit ermittelt. Es wird gezeigt, daßK ₁=0 gilt und dieK ₃,K ₄, ... gegenüberK ₂ schnell abnehmen.K ₂ nimmt ab, wenn , der dimensionslose Rotationsparameter, bis etwa zum Wert 2,2 ansteigt. Danach wächstK ₂ mit bis auf einem Endwert an, der etwa ab =500 erreicht wird. Dieses anomale Verhalten vonK ₂ findet eine physikalische Erklärung.

---

List of symbols C solute concentration - D molecular diffusivity - K _i longitudinal dispersion coefficients - 2L depth of the channel - P ₀ dimensionless pressure gradient along main flow - Pe Péclet number - q velocity vector - Q _x,Q _y mass flux along the main flow and the secondary flow directions - dimensionless average velocity along the main flow direction - (x, y, z) Cartesian co-ordinates Greek symbols dimensionless rotation parameter - the inclination of side walls withx-axis - kinematic viscosity - fluid density - dimensionless time - angular velocity of the channel - dimensionless distance along the main flow direction - dimensionless distance along the vertical direction - dimensionless solute concentration - integral of the dispersion coefficientK ₂() over a time interval     

The dynamic performance of the Weissenberg rheogoniometer III. Large amplitude oscillatory shearing — harmonic analysis

The harmonic content of the nonlinear dynamic behaviour of 1% polyacrylamide in 50% glycerol/water was studied using a standard Model R 18 Weissenberg Rheogoniometer. The Fourier analysis of the Oscillation Input and Torsion Head motions was performed using a Digital Transfer Function Analyser.In the absence of fluid inertia effects and when the amplitude of the (fundamental) Oscillation Input motion _I is much greater than the amplitudes of the Fourier components of the Torsion Head motion _Tn empirical nonlinear dynamic rheological propertiesG _n (, ⁰),G _n (, ⁰) and/or _n (, ⁰), _n (, ⁰) may be evaluated without a-priori-knowledge of a rheological constitutive equation. A detailed derivation of the basic equations involved is presented.Cone and plate data for the third harmonic storage modulus (dynamic rigidity)G ₃ (, ⁰), loss modulusG ₃ (, ⁰) and loss angle ₃ (, ⁰) are presented for the frequency range 3.14 × 10^–2 1.25 × 10² rad/s at two strain amplitudes, _CP ⁰ = 2.27 and 4.03. Composite cone and plate and parallel plates data for both the third and fifth harmonic dynamic viscosities ₃ (, ⁰), _S (, ⁰) and dynamic rigiditiesG ₃ (, ⁰),G ₅ (, ⁰) are presented for strain amplitudes in the ranges 1.10 _CP ⁰ 4.03 and 1.80 _PP ⁰ 36 for a single frequency, = 3.14 × 10^–1 rad/s. Good agreement was obtained between the results from both geometries and the absence of significant fluid inertia effects was confirmed by the superposition of the data for different gap widths.     

Optical co-ordinates in general relativity 2 — the problem of distance

Summary Let denote the congruence of null geodesics associated with a given optical observer inV ₄. We prove that determines a unique collection of vector fieldsM₍₎ ( =1, 2, 3) and ₍₀₎ overV ₄, satisfying a weak version of Killing's conditions.This allows a natural interpretation of these fields as the infinitesimal generators of spatial rotations and temporal translation relative to the given observer. We prove also that the definition of the fieldsM₍₎ and ₍₀₎ is mathematically equivalent to the choice of a distinguished affine parameter f along the curves of, playing the role of a retarded distance from the observer.The relation between f and other possible definitions of distance is discussed.

---

Sommario Sia la congruenza di geodetiche nulle associata ad un osservatore ottico assegnato nello spazio-tempoV ₄. Dimostriamo che determina un'unica collezione di campi vettorialiM₍₎ ( =1, 2, 3) e ₍₀₎ inV ₄ che soddisfano una versione in forma debole delle equazioni di Killing. Ciò suggerisce una naturale interpretazione di questi campi come generatori infinitesimi di rotazioni spaziali e traslazioni temporali relative all'osservatore assegnato. Dimostriamo anche che la definizione dei campiM₍₎, ₍₀₎ è matematicamente equivalente alla scelta di un parametro affine privilegiato f lungo le curve di, che gioca il ruolo di distanza ritardata dall'osservatore. Successivamente si esaminano i legami tra f ed altre possibili definizioni di distanza in grande.

---

---

Work performed in the sphere of activity of: Gruppo Nazionale per la Fisica Matematica del CNR.     

Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].     

The contribution of internal degrees of freedom to the non-Newtonian rheology of model polymer fluids

We report non-equilibrium molecular dynamics simulations of rigid and non-rigid dumbbell fluids to determine the contribution of internal degrees of freedom to strain-rate-dependent shear viscosity. The model adopted for non-rigid molecules is a modification of the finitely extensible nonlinear elastic (FENE) dumbbell commonly used in kinetic theories of polymer solutions. We consider model polymer melts — that is, fluids composed of rigid dumbbells and of FENE dumbbells. We report the steady-state stress tensor and the transient stress response to an applied Couerte strain field for several strain rates. We find that the rheological properties of the rigid and FENE dumbbells are qualitatively and quantitatively similar. (The only exception to this is the zero strain rate shear viscosity.) Except at high strain rates, the average conformation of the FENE dumbbells in a Couette strain field is found to be very similar to that of FENE dumbbells in the absence of strain. The theological properties of the two dumbbell fluids are compared to those of a corresponding fluid of spheres which is shown to be the most non-Newtonian of the three fluids considered.Symbol Definition b dimensionless time constant relating vibration to other forms of motion - F force on center of mass of dumbbell - F _i force on bead i of dumbbell - F force between center of masses of dumbbells and - F _ij force between beads i and j - h vector connecting bead to center of mass of dumbbell - H dimensionless spring constant for dumbbells, in units of / ² - I moment of inertia of dumbbell - J general current induced by applied field - k _B Boltzmann's constant - L angular momentum - m mass of bead, (= m/2) - M mass of dumbbell, g - N number of dumbbells in simulation cell - P translational momentum of center of mass of dumbbell - P pressure tensor - P _xy xy component of pressure tensor - Q separation of beads in dumbbell - Q _eq equilibrium extension of FENE dumbbell and fixed extension of rigid dumbbell - Q ₀ maximum extension of dumbbell - r _ij vector connecting beads i and j - r position vector of center of mass dumbbell - R vector connecting centers of mass of two dumbbells - t time - t ^* dimensionless time, in units of m/ - T ^* dimensionless temperature, in units of /k - u potential energy - u velocity vector of flow field - u _x x component of velocity vector - V volume of simulation cell - X general applied field - strain rate, s^–1 - ^* dimensionless shear rate, in units of /m ² - general transport property - Lennard-Jones potential well depth - friction factor for Gaussian thermostat - shear viscosity, g/cms - ^* dimensionless shear viscosity, in units of m/ ² - ^* dimensionless number density, in units of ^–3 - Lennard-Jones separation of minimum energy - relaxation time of a fluid - angular velocity of dumbbell - orientation angle of dumbbell      

Effects of MHD free convection and mass transfer on the flow past an oscillating infinite coaxial vertical circular cylinder

The effects of MHD free convection and mass transfer are taken into account on the flow past oscillating infinite coaxial vertical circular cylinder. The analytical expressions for velocity, temperature and concentration of the fluid are obtained by using perturbation technique.

---

Einwirkungen von freier MHD-Konvektion und Stoffübertragung auf eine Strömung nach einem schwingenden unendlichen koaxialen vertikalen Zylinder

Zusammenfassung Die Einwirkungen der freien MHD-Konvektion und Stoffübertragung auf eine Strömung nach einem schwingenden, unendlichen, koaxialen, vertikalen Zylinder wurden untersucht. Die analytischen Ausdrücke der Geschwindigkeit, Temperatur und Fluidkonzentration sind durch die Perturbationstechnik erhalten worden.

---

Nomenclature C _p Specific heat at constant temperature - C the species concentration near the circular cylinder - C _w the species concentration of the circular cylinder - C the species concentration of the fluid at infinite - * dimensionless species concentration - D chemical molecular diffusivity - g acceleration due to gravity - Gr Grashof number - Gm modified Grashof number - K thermal conductivity - Pr Prandtl number - r _a ,r _b radius of inner and outer cylinder - a, b dimensionless inner and outer radius - r,r coordinate and dimensionless coordinate normal to the circular cylinder - Sc Schmidt number - t time - t dimensionless time - T temperature of the fluid near the circular cylinder - T _w temperature of the circular cylinder - T temperature of the fluid at infinite - u velocity of the fluid - u dimensionless velocity of the fluid - U ₀ reference velocity - z,z coordinate and dimensionless coordinate along the circular cylinder - coefficient of volume expansion - * coefficient of thermal expansion with concentration - dimensionless temperature - H ₀ magnetic field intensity - coefficient of viscosity - _e permeability (magnetic) - kinematic viscosity - electric conductivity - density - M Hartmann number - dimensionless skin-friction - frequency - dimensionless frequency     

Stress analysis of the cylinder subjected to arbitrarily distributed axisymmetrical loads

Summary Stress analysis has been carried out for a finite cylinder subjected to arbitrarily distributed axisymmetrical surface loads. Direct stress _x in the axial direction is assumed to be of the form _x = ₀+r ₁ +r ₂ where ₀ to ₂ are functions of x. Using the equations of equilibrium and compatibility the other direct stresses and the shearing stress are expressed by ₁ and ₂. Fundamental equations governing ₁ and ₂ are introduced using the variational principle of complementary energy. From the results of the present analysis it is evident that the boundary conditions can be satisfied completely even for the case where the external forces are specified in complicated form, and that more accurate solutions can easily be obtained by introducing additional terms in _x.

---

Spannungsanalyse für den Zylinder unter axialsymmetrischer Last in beliebiger Verteilung

Übersicht Für einen endlichen Zylinder unter axialsymmetrischer Oberflächenlast in beliebiger Verteilung werden die Spannungen ermittelt. Die Normalspannung in Axialrichtung wird in der Form _x = ₀+r ₁ +r ₂ angesetzt mit ₀, ₁, ₂ als Funktionen von x. Mit Hilfe der Gleichgewichtsund Verträglichkeitsbedingungen werden die anderen Normalspannungen und die Schubspannung durch ₁ und ₂ ausgedrückt. Über das Variationsprinzip für die Komplementärenergie werden die grundlegenden Gleichungen für ₁ und ₂ eingeführt. Die Ergebnisse zeigen, daß die Randbedingungen selbst für komplizierte Belastungsarten vollständig erfüllbar sind und mit zusätzlichen Termen in _x mühelos noch genauere Lösungen bestimmt werden können.

     

The secondary flow induced around a sphere in an oscillating stream of elastico-viscous liquid

The present paper is devoted to the theoretical study of the secondary flow induced around a sphere in an oscillating stream of an elastico-viscous liquid. The boundary layer equations are derived following Wang's method and solved by the method of successive approximations. The effect of elasticity of the liquid is to produce a reverse flow in the region close to the surface of the sphere and to shift the entire flow pattern towards the main flow. The resistance on the surface of the sphere and the steady secondary inflow increase with the elasticity of the liquid.Nomenclature a radius of the sphere - b ^ik contravariant components of a tensor - e contravariant components of the rate of strain tensor - F() see (47) - G total nondimensional resistance on the surface of the sphere - g _ik covariant components of the metric tensor - f, g, h secondary flow components introduced in (34) - k ₀ measure of relaxation time minus retardation time (elastico-viscous parameter) - K =k ₀ ²/V ₀ ² , nondimensional parameter characterizing the elasticity of the liquid - n measure of the ratio of the boundary layer thickness and the oscillation amplitude - N, T defined in (44) - p arbitrary isotropic pressure - p _ik covariant components of the stress tensor - p ^ik contravariant components of the stress tensor associated with the change of shape of the material - R =V ₀ a/v, the Reynolds number - S =a/V ₀, the Strouhall number - r, , spherical polar coordinates - u, v, w r, , component of velocity - t time - V(, t) potential velocity distribution around the sphere - V ₀ characteristic velocity - u, v, t, y, P nondimensional quantities defined in (15) - reciprocal of s - density - defined in (32) - defined in (42) - ₀ limiting viscosity for very small changes in deformation velocity - complex conjugate of - oscillation frequency - = ₀/, the kinematic coefficient of viscosity - , defined in (52) - (, y) stream function defined in (45) - =(NT/2n)^1/2 y - /t convective time derivative (1) _ik      

Free convection from a vertical plate with concentrated and distributed thermal sources

An analysis is developed for the laminar free convection from a vertical plate with uniformly distributed wall heat flux and a concentrated line thermal source embedded at the leading edge. We introduce a parameter=(1 +Q _L/Q_w)^–1=(1 + Ra_L/Ra_w)^–1 to describe the relative strength of the two thermal sources; and propose a unified buoyancy parameter=( Ra_L+ Ra_w)^1/5 with=1/(1 +Pr ^–1) to properly scale the dependent and independent variables. The variables are so defined that the resulting nonsimilar boundary-layer equations can describe exactly the buoyancy-induced flow from the dual sources with any relative strength to fluids of any Prandtl number from very small values to infinity. These nonsimilar equations are readily reducible to the self-similar equations of an adiabatic wall plume for=0, and to those of free convection from uniform flux plate for=1. Rigorous finite-difference solutions for fluids of Pr from 0.001 to are obtained over the entire range of from 0 to 1. The effects of both relative source strength and Prandtl number on the velocity profiles, temperature profiles, and the variations of wall temperature, are clearly illustrated.

---

Freie Konvektion an einer vertikalen Platte mit einer konzentrierten und einer gleichmäßig verteilten Wärmequelle

Zusammenfassung Für die freie Konvektion an einer vertikalen Platte mit einer gleichmäßig verteilten Wandwärmestromdichte und einer in der Vorderkante eingebetteten linienförmigen Wärmequelle wird eine Berechnungsmethode entwickelt. Zur Beschreibung der relativen Stärke der beiden Wärmequellen führen wir einen Parameter=(1 + Q_L/Q_w)^–1=(1 + Ra_L/Ra_w)^–1 ein und schlagen einen vereinheitlichten Auftriebsparameter=( Ra _L+ Ra _w)^1/5 mit=1/(1 +Pr ^–1 für die Skalierung der abhängigen und unabhängigen Variablen vor. Die Variablen werden so definiert, daß mit den sich ergebenden unabhängigen Grenzschichtgleichungen die von den beiden Wärmequellen beliebiger Stärke verursachte Auftriebsströmung von Fluiden beliebiger Prandtl-Zahl genau beschrieben werden kann. Diese unabhängigen Gleichungen können ohne weiteres auf die selbstähnlichen Gleichungen für den Fall einer lokalen Wärmezufuhr an einer sonst adiabatischen Wand für=0 und jenen der freien konvektion an einer Platte mit einheitlichem Wärmestrom für=1 zurückgeführt werden. Für Fluide mit der Prandtl-Zahl zwischen 0,001 und Unendlich werden nach der strengen finite Differenzen-Methode Lösungen im Bereich von zwischen 0 und 1 erhalten. Der jeweilige Einfluß der relativen Quellenstärke und der Prandtl-Zahl auf die Geschwindigkeits- und Temperaturprofile sowie die Veränderung der Wandtemperatur werden deutlich dargestellt.

---

Nomenclature C _f friction coefficient - C _p specific heat - f reduced stream function - g gravitational acceleration - k thermal conductivity - L width of the plate - Nu local Nusselt number - Pr Prandtl number - q _w wall heat flux - Q _L heat generated by the line source - Q _w heat released by the uniform-flux wall from 0 tox, q _w Lx - Ra _L local Rayleigh number, g T _L ^* x ³/( ) - Ra _w local Rayleigh number,g T _w ^* w ³/( ) - T fluid temperature - T temperature of ambient fluid - T _L ^* characteristic temperature of the line source,Q _{L/(C p} L) - T _w ^* characteristic temperature of the uniform flux wall, =q _w x/k=Q _w /(C _p L) - u velocity component in then-direction - U₀ dimensionless velocity,u/(/x) Ra _L ^2/5 - U ₁ dimensionless velocity,u/(/x) Ra _w ^2/5 - velocity component in they-direction - x coordinate parallel to the plate - y coordinate normal to the plate - thermal diffusivity - thermal expansion coefficient - pseudo-similarity variable,(y/x) - dimensionless temperature, (T–T )/(T _L ^* +T _w ^* ) - ₀ dimensionless temperature, (Ra_l)^1/5 (T–T )/T _L ^* - ₁ dimensionless temperature, (Ra_w)Ra_w)^1/5 (T–T )/T _w ^* - (Ra _L+Ra_w)^1/5 - kinematic viscosity - (1 +Ra _L/Ra_w)^–1=(1 +T _L ^* /T _w ^* )^–1=(1 + Q_L/Q_w)^–1 - density - Pr/(1 +Pr) - _w wall shear stress - stream function     

Similar solutions and the asymptotics of filtration equations

In this paper we consider the asymptotic behavior of solutions of the quasilinear equation of filtration as t. We prove that similar solutions of the equation u _t = (u )_xx asymptotically represent solutions of the Cauchy problem for the full equation u _t = [(u)]_xx if (u) is close to u for small u.     

Critical phenomena and waves in gas-liquid systems

The results of the hydraulic studies of gas-liquid media, wave processes in two-phase media and critical phenomena are described. Some methodological foundations to describe these media and methods to obtain the basic similarity criteria for the hydraulics and gas-dynamics of bubble suspensions are discussed. A detailed consideration is given for the phase transition processes on interfaces and the interface stability. A relation has been revealed between the wave and critical phenomena in two-phase systems.Nomenclature a thermal diffusivity - Ar Archimedes number - B gas constant - C heat capacity - C _p heat capacity at constant pressure - C _v heat capacity at constant volume - c ₀ acoustic velocity in the mixture - c _l acoustic velocity in the liquid - C _f flow resistance coefficient - G mass rate of flow - g gravitational acceleration - L latent heat of evaporation - l initial perturbation width - M Mach number - Nu Nusselt number - P pressure - Pr Prandtl number - R bubble radius - (3P ₀/R ₀ ² _f )^–1 bubble resonance frequency square - T temperature - U medium motion velocity - W heavy phase velocity - W light phase velocity - We Weber number - heat release coefficient - dispersion coefficient - void fraction - adiabatic index - film thickness - dimensionless film thickness - kinematic viscosity coefficient - dynamical viscosity coefficient - dissipation coefficient in the mixture - dispersion parameter - _f liquid phase density - light phase density - heat conductivity - surface tension - frequency, ₀ ² =3P ₀/ _f R ₀ ²     

On nonlinear problems of mixed type: A qualitative theory using infinite-dimensional center manifolds

We consider the equation a(y)u_xx+div_y(b(y)_yu)+c(y)u=g(y, u) in the cylinder (–l,l)×, being elliptic where b(y)>0 and hyperbolic where b(y)<0. We construct self-adjoint realizations in L₂() of the operatorAu= (1/a) div_y(b_yu)+(c/a) in the case ofb changing sign. This leads to the abstract problem u_xx+Au=g(u), whereA has a spectrum extending to + as well as to –. For l= it is shown that all sufficiently small solutions lie on an infinite-dimensional center manifold and behave like those of a hyperbolic problem. Anx-independent cross-sectional integral E=E(u, u_x) is derived showing that all solutions on the center manifold remain bounded forx ±. For finitel, all small solutionsu are close to a solution on the center manifold such that u(x)-(x) Ce ^-(1-|x|) for allx, whereC and are independent ofu. Hence, the solutions are dominated by hyperbolic properties, except close to the terminal ends {±1}×, where boundary layers of elliptic type appear.     

Theoretical derivation of tangential velocity profiles in a flat vortex chamber-influence of turbulence and wall friction

Summary As part of a study on the hydrodynamics of a cyclone separator, a theoretical investigation of the flow pattern in a flat box cyclone (vortex chamber) has been carried out. Expressions have been derived for the tangential velocity profile as influenced by internal friction (eddy viscosity) and wall friction. The most important parameter controlling the tangential velocity profile is = –u ₀ R/(v+ ), where u ₀ is the radial velocity at the outer radius R of the cyclone, the kinematic liquid viscosity and is the kinematic eddy viscosity. For values of greater than about 10 the tangential velocity profile is nearly hyperbolic, for smaller than 1 the tangential velocity even decreases towards the centre. It is shown how and also the wall friction coefficient may be obtained from experimental velocity profiles with the aid of suitable graphs. Because of the close relation between eddy viscosity and eddy diffusion, measurements of velocity profiles in flat box cyclones will also provide information on the eddy motion of particles in a cyclone, a motion reducing its separation efficiency.List of symbols A cross-sectional area of cyclone inlet - h height of cyclone - p static pressure in cyclone - p static pressure difference in cyclone between two points on different radius - r radius in cyclone - r ₁ radius of cyclone outlet - R radius of cyclone circumference - u radial velocity in cyclone - u ₀ radial velocity at circumference of flat box cyclone - v tangential velocity - v ₀ tangential velocity at circumference of flat box cyclone - w axial velocity - z axial co-ordinate in cyclone - friction coefficient in flat box cyclone (for definition see § 5) - ₁ value of friction coefficient for ₁<< ₂ - ₂ value of friction coefficient for ₂<<1 - = - ₁ value of for ₁<< ₂ - ₂ value of for ₂<<1 - thickness of laminar boundary layer - =/h - turbulent kinematic viscosity - ratio of z to h - k ratio of height of cyclone to radius R of cyclone - parameter describing velocity profile in cyclone =–u ₀ R/(+) - kinematic viscosity of fluid - density of fluid - ratio of r to R - ₁ value of at outlet of cyclone - ₂ value of at inner radius of cyclone inlet - _w shear stress at cyclone wall - angular momentum in cyclone/angular momentum in cyclone inlet - ₁ value of at = ₁ - ₂ value of at = ₂     

Diffusion of moisture in deformable porous media. Anisotropic fibrous materials

This paper presents a study on the deformation of anisotropic fibrous porous media subjected to moistening by water in the liquid phase. The deformation of the medium is studied by applying the concept of effective stress. Given the structure of the medium, the displacement of the solid matrix is not taken into account with respect to the displacement of the liquid phase. The transport equations are derived from the model proposed by Narasimhan. The transport coefficients and the relation between the variation in apparent density and effective stress are obtained by test measurements. A numerical model has been established and applied for studying drip moistening of mineral wool samples capable or incapable of deformation.Nomenclature D mass diffusion coefficient [L²t^–1] - e void fraction - g gravity acceleration [Lt^–2] - J mass transfer density [ML^–2t^–1] - K hydraulic conductivity [Lt^–1] - K _s hydraulic conductivity of the solid phase [Lt^–1] - K ^* hydraulic conductivity of the deformable porous medium [Lt^–1] - P pressure of moistening liquid [ML^–1 t^–2] - S degree of saturation - t time [t] - V speed [Lt^–1] - X horizontal coordinate [L] - Z vertical coordinate measured from the bottom of porous medium [L] - z z-coordinate [L] Greek Letters porosity - ₁ total hydric potential [L] - _g gas density [ML^–3] - ₁ liquid density [ML^–3] - ₀ apparent density [ML^–3] - _s density of the solid phase [ML^–3] - density of the moist porous medium [ML^–3] - external load [ML^–1t^–2] - effective stress [ML^–1t^–2] - bishop's parameter - matrix potential or capillary suction [L] Indices g gas - 1 moistening liquid - p direction perpendicular to fiber planes - s solid matrix - t direction parallel to fiber planes - v pore Exponent * movement of solid particles taken into account     

Flow of second-order fluids over an enclosed rotating disc

Summary This paper is devoted to a study of the flow of a second-order fluid (flowing with a small mass rate of symmetrical radial outflow m, taken negative for a net radial inflow) over a finite rotating disc enclosed within a coaxial cylinderical casing. The effects of the second-order terms are observed to depend upon two dimensionless parameters ₁ and ₂. Maximum values ₁ and ₂ of the dimensionless radial distances at which there is no recirculation, for the cases of net radial outflow (m>0) and net radial inflow (m<0) respectively, decrease with an increase in the second-order effects [represented by T(=₁+₂)]. The velocities at ₁ and ₂ as well as at some other fixed radii have been calculated for different T and the associated phenomena of no-recirculation/recirculation discussed. The change in flow phenomena due to a reversal of the direction of net radial flow has also been studied. The moment on the rotating disc increases with T.Nomenclature , , z coordinates in a cylindrical polar system - z ₀ distance between rotor and stator (gap length) - =/z ₀, dimensionless radial distance - =z/z ₀, dimensionless axial distance - _s = _s/z₀, dimensionless disc radius - V =(u, v, w), velocity vector - dimensionless velocity components - uniform angular velocity of the rotor - , p fluid density and pressure - P =p/(₂ z ₀₂ ² , dimensionless pressure - ₁, ₂, ₃ kinematic coefficients of Newtonian viscosity, elastico-viscosity and cross-viscosity respectively - ₁, _{2 2}/z ₀ ² , resp. ₃/z ₀ ² , dimensionless parameters representing the ratio of second-order and inertial effects - m = , mass rate of symmetrical radial outflow - l a number associated with induced circulatory flow - Rm =m/(z ₀₁), Reynolds number of radial outflow - R _l =l/(z ₀₁), Reynolds number of induced circulatory flow - Rz =z ₀ ² /₁, Reynolds number based on the gap - ₁, ₂ maximum radii at which there is no recirculation for the cases Rm>0 and Rm<0 respectively - ₁(T), ₂(T) ₁ and ₂ for different T - U _1(T) ⁽⁺⁾ = dimensionless radial velocity, Rm>0 - V _1(T) ⁽⁺⁾ = , dimensionless transverse velocity, Rm>0 - U _2(T) ^(–) = , dimensionless radial velocity, Rm=–Rn<0, m=–n - V _2(T) ^(–) = , dimensionless transverse velocity, Rm<0 - C _m moment coefficient     

A generalized rheological model of thixotropic materials

Summary A generalization of the rheological model of thixotropic materials, presented previously, was carried out. In the generalized rheological equation of state the yield stress depending on the structural parameter was introduced. In the generalized rate equation the difference in the destruction and recovery rates of the material structure was taken into account. A procedure leading to the determination of nine rheological parameters of the generalized model was worked out. The model was checked experimentally for a thixotropic paint.

---

Zusammenfassung Eine früher dargestellte Theorie thixotroper Stoffe wird verallgemeinert, wobei eine von dem Strukturparameter abhängige Fließspannung eingeführt wird. Weiterhin wird der Unterschied zwischen der Zerstörungs-und der Wiederaufbaugeschwindigkeit der Stoffstruktur berücksichtigt. Eine Methode zur Bestimmung der neun benötigten Stoffparameter wird ausgearbeitet. Das Modell wird am Beispiel einer thixotropen Farbe experimentell geprüft.

---

Notation a rheological parameter in eq. [26], s^–1 - A rheological parameter in eq. [16] - b rheological parameter in eq. [26] - c function in eq. [21] - averaged value of functionc in eq. [28] - c function in the rate equation [23], defined by eq. [21] - G function [1] defining material of the rate type - h function [2] determining the state of thixotropic fluid - k rheological parameter in the Herschel-Bulkley equation [17] or, in special case, in eq. [8], Ns ⁿ /m² - K function in eq. [18], Ns ^m /m² - m rheological parameter in eq. [18] or, in special case, in eq. [10] - n rheological parameter in the Herschel-Bulkley model [17] or, in special case, in eq. [8] - s rheological parameter in eq. [16] - t time, s - x arbitrary real variable - rheological parameter in eq. [9], s - shear rate, s^–1 - structural parameter, defined by eq. [2] - substantial derivative of structural parameter, s^–1 - _e function [6] describing the equilibrium curve in the coordinate system ( ) - ₀ initial value of structural parameter (att = 0) - natural time function of the thixotropic material, defined by eq. [22] - shear stress, N/m² - substantial derivative of shear stress, N/m² s - _e function describing equilibrium flow curve in the coordinate system ( ) - ₀ equilibrium yield stress, defined by eq. [12], N/m² - _y function of structural parameter describing the yield stress - function in eq. [11] Notation used in the algorithm:(Appendix) i,j,k integer - k _e (i) ordinal number of the experimental point at which the line of _i = const intersects the equilibrium flow curve - l _i number of the experiments of the type stepchange of the shear rate - l _j number of experimental points in one experiment of the type step-change of the shear rate - n _e number of experimental points on the equilibrium flow curve - n _k number of experimental points on the line of constant - n _y number of lines of constant - t(j) measured time interval (from the moment of the step-change of shear rate) - abscissa of the experimental point of ordinal numberk on the line of _i = const, in the coordinate system ( ) - abscissa of the experimental point of ordinal numberi on the equilibrium flow curve, in the coordinate system ( ) - shear rate at which the experiment of the type step-change of shear rate was carried out - _e (i) ordinate of the experimental point of ordinal numberi on the equilibrium flow curve, in the coordinate system ( ) - _y (i) value of yield stress at = _i - _s (i,j) experimental value of shear stress at constant value of shear rate (2i) for time intervalt(j) - (i,k) ordinate of the experimental point of ordinal numberk on the line of _i = const, in the coordinate system ( ) - ₀ the admissible value of the difference between the experimental and theoretical value of shear stress With 4 figures and 1 table     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.