Das Kupfer(II)‐indium‐oxidphosphat CuInOPO4 mit α‐Fe2OPO4‐Struktur,dargestellt durch die Oxidation einer Cu/In/P‐Legierung im Sauerstoffstrom

The Copper(II) Indium Oxide Phosphate CuInOPO₄ with α‐Fe₂OPO₄ Structure, prepared by Oxidation of a Cu/In/P Alloy with Oxygen Green single crystals of CuInOPO₄ (orthorhombic, Pnma, a = 774.5(1) pm, b = 661.0(1) pm, c = 730.6(1) pm, Z = 4) were prepared by reaction of Cu/In/P‐alloys with oxygen. The compound is isotypic with α‐Fe₂OPO₄. The structure contains isolated [CuO_4/2O₂]‐chains running along [010] formed by CuO₆‐octahedra which are connected by common edges. The chains are linked by phosphate groups and by [InO₄O_2/2]‐chains along [100] consisting of trans vertex connected InO₆‐octahedra.     

Polypyrrole‐coated alginate/magnetite nanoparticles composite sorbent for the extraction of endocrine‐disrupting compounds

Magnetite nanoparticles incorporated into alginate beads and coated with a polypyrrole adsorbent were prepared (polypyrrole/Fe₃O₄/alginate bead) and used as an effective magnetic solid‐phase extraction sorbent for the extraction and enrichment of endocrine‐disrupting compounds (estriol, β‐estradiol and bisphenol A) in water samples. The determination of the extracted endocrine‐disrupting compounds was performed using high‐performance liquid chromatography with a fluorescence detector. The effect of various parameters on the extraction efficiency of endocrine disrupting compounds were investigated and optimized including the type and amount of sorbent, sample pH, extraction time, stirring speed, and desorption conditions. Under optimum conditions, the calibration curves were linear in the concentration range of 0.5–100.0 μg/L, and the limit of detection was 0.5 μg/L. The developed method showed a high extraction efficiency, the recoveries were in the range of 90.5 ± 4.1 to 98.2 ± 5.5%. The developed sorbent was easy to prepare, was cost‐effective, robust, and provided a good reproducibility (RSDs < 5%), and could be reused 16 times. The developed method was successfully applied for the determination of endocrine‐disrupting compounds in water samples.     

Syntheses of Novel Fe/S Clusters with μ‐Aminocarbyne Ligands

The reaction of Fe₃(CO)₁₂ with (C₃H₅)₂NCS₂K in THF at room temperature afforded a red‐brown solution. Treatment of the thus‐obtained solution with MeI and PhCH₂Br afforded clusters 1 , (μ‐MeS)Fe₂(CO)₆(μ₄‐S)Fe₂(CO)₆(μ‐CN(C₃H₅)₂), and 2 , (μ‐PhCH₂CO)Fe₂(CO)₆(μ₄‐S)Fe₂(CO)₆(μ‐CN(C₃H₅)₂). Their structures were unambiguously determined by X‐ray crystallography. Therefore, this methodology provides a novel route for the syntheses of spiro‐S Fe/S clusters with aminocarbyne ligands.     

Temperature dependence of the phase separation in ethyl cyanoethyl cellulose/poly(acrylic acid)/4′‐n‐pentyl‐4‐cyano‐biphenyl composite films

A novel polymer‐dispersed liquid‐crystal film consisting of micrometer‐scale liquid‐crystal droplets in ultraviolet‐cured polymer composite matrices with cholesteric order was prepared and the influence of cure temperature on the phase separation was studied. The existence and pitch of the ethyl cyanoethyl cellulose cholesteric liquid‐crystalline phase were influenced by the existence of low molecular weight liquid crystals. The macromolecular cholesteric phase disappeared when the 4′‐n‐pentyl‐4‐cyano‐biphenyl concentration was over 40 wt %, and 4′‐n‐pentyl‐4‐cyano‐biphenyl domains were dispersed in the isotropic matrix of the polymer composite. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1334–1341, 2002     

Annealing induced microstructure and fracture resistance changes in isotactic polypropylene/ethylene‐octene copolymer blends with and without β‐phase nucleating agent

Previous work showed that annealing induced the great improvement of fracture resistance of β‐iPP, relating to the decreased number of chain segments in the amorphous region. To further prove the rationality of this observation, in this work, the ethylene‐octene copolymer (POE) toughened isotactic polypropylene (iPP) blends with or without β‐phase nucleating agent (β‐NA) were adopted and the changes of microstructure and fracture resistance during the annealing process were further investigated comparatively. The results showed that, whether for the α‐phase crystalline structure (non‐nucleated) or for the β‐phase crystalline structure (β‐NA nucleated) in iPP matrix, annealing can induce the dramatic improvement of fracture resistance at a certain annealing temperature (120–140 °C for β‐NA nucleated blends whereas 120–150 °C for non‐nucleated blends). Especially, non‐nucleated blends exhibit more apparent variations in fracture resistance compared with β‐NA nucleated blends during the annealing process. The phase morphology of elastomer, supermolecular structure of matrix, the crystalline structure including the degree of crystallinity and the relative content of β‐phase, and the relaxation of chain segments were investigated to explore the toughening mechanism of the samples after being annealed. It was proposed that, even if the content of elastomer is very few, the excellent fracture resistance can be easily achieved through adjusting the numbers of chain segments in the amorphous phase by annealing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Hydrothermal Synthesis and Properties of Open-Framework Mixed-valence Iron Phosphates Fe2^111Fe1.5^11（PO4）3 with Three-dimensional Structure

The open‐framework iron phosphate Fe₂^lllFe_1.5^ll,(PO₄)₃ was hydrothermally synthesized and characterized by elemental analysis, IR, EPR, XPS and single crystal X‐ray diffraction analysis. The title compound crystallized in the triclinic, space group P1 with a=0.64724(4) nm, b=0.79651(6) nm, c=0.94229(5) nm, a= 104.447(2)°. β= 108.919(4)°. y= 101.741(4)°, V=0.42302(5) nm³, Z= 1 and R_I (wR₂)=0.0307 (0.0793). Crystal data were collected on a Rigaku R‐AXIS RAPID IP diffractometer with Mo Ka (γ=0.071073 nm) at 293(2) K in the range of 2.43°<Õ <27.46°. The structure of 1 consists of 19 non‐hydrogen atoms including three and a half crystallographically independent Fe and three P atoms. Fe(1) connects its symmetrical Fe(1A) through bridging oxygen forming a dimer and the dimers are connected by Fe(4) forming an infinite staircase‐like chain. Fe(2) and Fe(3) connect the infinite chains into a layer with bridging oxygen. Layers are interconnected via Fe(4) forming the six‐membered and eight‐membered channel systems.     

Fe3O4 nanoparticles coated with polyhedral oligomeric silsesquioxanes and β‐cyclodextrin for magnetic solid‐phase extraction of carbaryl and carbofuran

In this study, porous sandwich structure Fe₃O₄ nanoparticles coated by polyhedral oligomeric silsesquioxanes and β‐cyclodextrin were prepared by surface polymerization and were used as the magnetic solid phase extraction adsorbent for the extraction and determination of carbaryl and carbofuran. The Fe₃O₄ nanoparticles coated with polyhedral oligomeric silsesquioxanes and β‐cyclodextrin were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, and scanning electron microscopy. After optimizing the extraction conditions, a method that combined magnetic solid phase extraction with high‐performance liquid chromatography was developed for the determination of carbaryl and carbofuran in apple. The method exhibited a good linearity in the range of 2–400 μg/kg for carbaryl and carbofuran (R² = 0.9995), respectively. The limits of detection were 0.5 μg/kg of carbaryl and 0.7 μg/kg for carbofuran in apple, respectively. Extraction recoveries ranged from 94.2 to 103.1% with the preconcentration factor of 300 and the relative standard deviations were less than 5.9%. These results indicated that the method combined magnetic solid phase extraction with high‐performance liquid chromatography and was promising for the determination of carbaryl and carbofuran at trace amounts.     

Synthesis of 3,5‐Diarylcyclohex‐2‐enones by NH4Cl/HCl‐Catalyzed Cyclization and Deacetylation of 4‐Acetylhexane‐1,5‐diones

A new route for the synthesis of 3,5‐diarylcyclohex‐2‐enones is reported. The 4‐acetyl‐1,3‐diarylhexane‐1,5‐diones were obtained by the addition of pentane‐2,4‐dione to chalcones. The reaction of 4‐acetyl‐1,3‐diarylhexane‐1,5‐diones with NH₄Cl/HCl in EtOH under reflux conditions gave the 3,5‐diarylcyclohex‐2‐enones in good yields. All synthesized compounds were characterized by spectroscopic methods (¹H‐, ¹³C‐NMR, and IR), and elemental analyses.     

Study of formation and thermal stability of the Fe/ZnO(000‐1) interface

Formation and thermal stability of the Fe/ZnO(000‐1) interface have been studied by means of X‐ray photoelectron spectroscopy and low energy electron diffraction. The results indicated a pseudo 2D growth mode for iron on ZnO. In addition, it could be shown that under ultra high vacuum conditions deposited Fe⁰ on a ZnO(000‐1) single crystal was partially oxidized by a small fraction of residual ? OH‐groups and ZnO to FeO. A strong temperature dependence of the interface reactivity was found upon annealing at temperatures up to 600 °C. Starting from 200 °C iron was first oxidized to bivalent iron oxide. After complete oxidation of Fe⁰ to Fe²⁺ at 375 °C, Fe²⁺ reacted to Fe³⁺. Above temperatures of 500 °C the deposited metallic iron was completely oxidized to trivalent iron. Further experiments with FeO on ZnO showed the oxidation state and the oxide film thickness of the deposited iron to be mainly dependent on the annealing temperature. Copyright © 2008 John Wiley & Sons, Ltd.     

The Effect of C4H and C5H on the Microstructure of Aqueous Solutions of 1‐Alkyl‐3‐methylimidazolium Tetrafluoroborate Ionic Liquids

As is well‐known, the C2?H proton of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([Emim]BF₄) and 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([Bmim]BF₄) has a strong ability to form hydrogen bonds. The purpose of this work is to evaluate the effect of the interactions of the C4?H and C5?H protons on the microstructure of [Emim]BF₄ and [Bmim]BF₄ with water by using ¹H NMR spectroscopy. The differences between the relative ¹H NMR chemical shifts of C2?H, C4?H, and C5?H and between the interaction‐energy parameters obtained from these chemical shifts are minor, thus suggesting that the interactions of C4?H and C5?H may have a considerable effect on the microstructure. To confirm this, the viscosities of the systems are estimated by using the interaction‐energy parameters obtained from the ¹H NMR chemical shifts of the three studied aromatic protons and water, showing that the interactions of C4?H and C5?H also play an important role in the microstructure.     

Alkylations of N4‐(4‐Pyridyl)‐3,5‐di(2‐pyridyl)‐1,2,4‐triazole: First Observation of Room‐Temperature Rearrangement of an N4‐Substituted Triazole to the N1 Analogue

Attempts to use alkylation to introduce a positive charge at the nitrogen atom of the 4‐pyridyl ring in the bis(bidentate) triazole ligand N⁴‐(4‐pyridyl)‐3,5‐di(2‐pyridyl)‐1,2,4‐triazole ( pydpt ) were made to ascertain what effect a strongly electron‐withdrawing group would have on the magnetic properties of any subsequent iron(II) complexes. Alkylation of pydpt under relatively mild conditions led in some cases to unexpected rearrangement products. Specifically, when benzyl bromide is used as the alkylating agent, and the reaction is carried out in refluxing acetonitrile, the N⁴ substituent moves to the N¹ position. However, when the same reaction is performed in dichloromethane at room temperature, the rearrangement does not occur and the desired product containing an alkylated N⁴ substituent is obtained. Heating a pure sample of N⁴‐Bzpydpt?Br to reflux in MeCN resulted in clean conversion to N1Bzpydpt.Br . This is consistent with N4‐Bzpydpt.Br being the kinetic product whereas N1Bzpydpt.Br is the thermodynamic product. When methyl iodide is used as the alkylating agent, the N⁴ to N¹ rearrangement occurs even at room temperature, and at reflux pydpt is doubly alkylated. The observation of the lowest reported temperatures for an N⁴ to N¹ rearrangement is due to this particular rearrangement involving nucleophilic aromatic substitution: a possible mechanism for this transformation is suggested.     

Magnetic solid‐phase extraction based on a polydopamine‐coated Fe3O4 nanoparticles absorbent for the determination of bisphenol A,tetrabromobisphenol A, 2,4,6‐tribromophenol,and (S)‐1,1’‐bi‐2‐naphthol in environmental waters by HPLC

Polydopamine‐coated Fe₃O₄ magnetic nanoparticles synthesized through a facile solvothermal reaction and the self‐polymerization of dopamine have been employed as a magnetic solid‐phase extraction sorbent to enrich four phenolic compounds, bisphenol A, tetrabromobisphenol A, (S)‐1,1′‐bi‐2‐naphthol and 2,4,6‐tribromophenol, from environmental waters followed by high‐performance liquid chromatographic detection. Various parameters of the extraction were optimized, including the pH of the sample matrix, the amount of polydopamine‐coated Fe₃O₄ sorbent, the adsorption time, the enrichment factor of analytes, the elution solvent, and the reusability of the nanoparticles sorbent. The recoveries of these phenols in spiked water samples were 62.0–112.0% with relative standard deviations of 0.8–7.7%, indicating the good reliability of the magnetic solid‐phase extraction with high‐performance liquid chromatography method. In addition, the extraction characteristics of the magnetic polydopamine‐coated Fe₃O₄ nanoparticles were elucidated comprehensively. It is found that there are hydrophobic, π–π stacking and hydrogen bonding interactions between phenols and more dispersible polydopamine‐coated Fe₃O₄ in water, among which hydrophobic interaction dominates the magnetic solid‐phase extraction performance.