Examination and analysis of Indian silver punch‐marked coins employing WD‐XRF and other noninvasive techniques

The archaeometallurgical analysis of ancient silver coins provides useful information regarding fabrication methodology, provenance, and trade route and explains large diversification in elementary composition, weight, and physical features. The present investigation deals with the chemical analysis and examination of the processing history of Indian punch‐marked silver coins dating to 400–200 bc . The chemical analysis was carried out by wavelength dispersive X‐ray fluorescence and X‐ray Diffraction (XRD). The microstructural examination was performed using field emission scanning electron microscope (FE‐SEM) and different phases were identified by Scanning Electron Microscopy coupled with Energy Dispersive X‐ray (SEM‐EDX) Spectroscopy. It was observed that all eight coins were manufactured with silver‐copper alloy. The ore used for obtaining silver was argentiferous galena, and cupellation was carried with perfection. The absence of slag inclusions as revealed by SEM examination indicated that coins (numbers 2, 4, 5, and 7) were cast from a molten state. The presence of Cu₂O, CuO, and Ag₂O on the surfaces of the coins was confirmed by XRD. The formed oxide layers provided protection and saved the coins from bulky corrosion products. The data reveal great divergence of coin surface from the composition of the core with the far better metallurgical process for refining of silver for this hoard.     

Analytical characterization of corrosion products of copper and its alloys on stained stone surfaces

Monuments, where stone and metals or metallic alloys are used together, are very frequently met in all historical periods and in all countries. In the case of bronze and other copper alloys, their corrosion products can be dissolved by the action of acid rain and thus reach the porous building materials in contact with (or near to) the metallic structures. Once absorbed by the stone, they precipitate on the external stone surface and inside its porous space. As the majority of these products are coloured, their precipitates may produce stains, which are perceived as unpleasant alterations of the original ‘values’ of the stone monuments. The removal of stains is therefore required on the occasion of conservation treatments. The paper reports on the characterisation of copper corrosion products found on two, very different, monuments in Rome: ‘Fontana delle Tartarughe’ (by T. Landini, last quarter of the 16th century) and ‘Statua dello Studente’ (by A. Cataldi, 1920). To identify the speciation of copper compounds in their carbonate matrices, different techniques [X‐ray diffraction, X‐ray fluorescence, SEM/energy‐dispersive X‐ray spectroscopy (EDS), micro‐Raman and XPS] had to be employed. To further confirm the identification of the chemical species, SEM/EDS data were also processed by principal component analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Analytical Analysis of Different Karats of Gold Using Laser Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Time of Flight Mass Spectrometer (LA-TOF-MS)

Laser induced breakdown spectroscopy (LIBS) coupled with a laser ablation time of flight mass spectrometer (LA-TOF-MS) has been developed for discrimination/analysis of the precious gold alloys cartage. Five gold alloys of Karats 18K, 19K, 20K, 22K and 24K having certified composition of gold as 75, 79, 85, 93 and 99.99% were tested and their precise elemental compositions were determined using the laser produced plasma technique. The plasma was generated by focusing beam of a Nd:YAG laser on the target in air and its time integrated emission spectra were registered in the range 250–870 nm. The calibration free LIBS technique (CF-LIBS) was used for the quantitative determination of the constituent elements present in different Karats of gold. Elemental compositions of these gold alloys were also determined using a Laser Ablation time of flight mass spectrometer (LA-TOF-MS). The LIBS limit of detection was calculated from the calibration curves for copper, silver and gold. Results of CF-LIBS and LA-TOF-MS are in excellent agreement with the certified values. It is demonstrated that LIBS coupled with LA-TOF-MS is an efficient technique that can be used to analyze any precious alloys in a fraction of a second.     

Soft X‐ray emission electron microscopy: chemical state microscopy from interface and bulk

Scanning electron microscopy (SEM) has long been a workhorse of materials science and provides information on morphology, structure and elemental composition. However, information as to the chemical state of the elements is only available for deep lying core levels of the heavy elements and not the light elements. Whilst considerable advances have been made in high‐resolution wavelength dispersive spectroscopy (WDS) and energy dispersive spectroscopy (EDS), electron microscopy in the soft X‐ray region of ≈ 50–1500 eV is lacking. We present first results for a combined instrument of a soft X‐ray emission (SXE) spectrometer together with a spatially resolving (<100 nm) electron gun. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of bath temperatures on the wettability of copper films surface prepared by electroless plating method on beech wood

Copper films were coated on beech wood substrates by electroless plating method. The influence of bath temperature on the copper films properties was studied by varying the bath temperatures 25, 35, 45 and 55 °C. Scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS), X‐ray diffraction (XRD) pattern, X‐ray photoelectron spectroscopy (XPS), micro Raman spectroscopy and contact angle measurements were used to both characterize the physical and chemical copper films properties and understand the influence of bath temperature on the wettability of copper surface. In our studies, we have found that the gained copper mass significantly increased at 55 °C. The crystalline nature of the coated copper was confirmed by XRD. The presence of Cu₂O and CuO was observed by XPS and micro Raman techniques, which confirms the oxidization of the coated copper surface. Also these characterization techniques have shown the big influence of bath temperature on the morphology, grain size, chemical composition and the film thickness of the coated copper. The wettability was highly influenced by increasing CuO on the coated copper, which is increased by the bath temperature. The contact angle measurements have demonstrated the influence of C―O, O―C?O and CuO components of the surface on the wettability of the samples. Copyright © 2016 John Wiley & Sons, Ltd.     

Functional Porous Carbon/Nickel Oxide Nanocomposites as Binder‐Free Electrodes for Supercapacitors

High‐surface‐area, guava‐leaf‐derived, heteroatom‐containing activated carbon (GHAC) materials were synthesized by means of a facile chemical activation method with KOH as activating agent and exploited as catalyst supports to disperse nickel oxide (NiO) nanocrystals (average size (2.0±0.1) nm) through a hydrothermal process. The textural and structural properties of these GHAC/NiO nanocomposites were characterized by various physicochemical techniques, namely, field‐emission SEM, high‐resolution TEM, elemental analysis, X‐ray diffraction, X‐ray photoelectron spectroscopy, thermogravimetric analysis, and Raman spectroscopy. The as‐synthesized GHAC/NiO nanocomposites were employed as binder‐free electrodes, which exhibited high specific capacitance (up to 461 F g^?1 at a current density of 2.3 A g^?1) and remarkable cycling stability, which may be attributed to the unique properties of GHAC and excellent electrochemical activity of the highly dispersed NiO nanocrystals.     

Surface microstructure formation by ps‐ and fs‐laser ablation of an elastomer composite

We investigated the laser ablation of an elastomer composite with picosecond‐ (ps‐) and femtosecond‐ (fs‐) pulsed UV lasers (ps‐laser: λ = 263 nm, τ = 8 ps; fs‐laser: λ = 248 nm, τ = 500 fs). Upon laser irradiation, a unique microstructure on the surface of the elastomer composite (acrylate polymer) containing carbon black (particle size: 18–30 nm) was observed. The laser‐ablated surfaces were analyzed by scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The formation mechanism is discussed in terms of thermal effects induced by the different pulse durations of the lasers.     

Ultrasonic assisted synthesis of nanocrystalline cellulose as support and reducing agent for Ag nanoparticles: green synthesis and novel effective nanocatalyst for degradation of organic dyes

In this study, nanocrystalline cellulose (NCC) prepared from microcrystalline cellulose using high‐intensity ultrasonication as mechanical method without any chemical treatment. The obtained NCC with around 30–50 nm diameters, utilized as support, reducing and stabilizing agent for in‐situ green and eco‐friendly synthesis of silver nanoparticles (Ag NPs). The catalytic activity of composite was examined for degradation of environmental pollutants. The structure of as‐synthesized composite (Ag@NCC) was characterized by ultraviolet–visible spectroscopy (UV–vis), field emission scanning electron microscopy (FE‐SEM); Transmission electron microscopy (TEM); Energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The results of the catalytic reaction experiments showed that spherically shaped silver nanoparticles of around 20 nm distributed on the surface of nanocellulose demonstrated high catalytic efficiency towards the removal of methyl orange (MO) and 4‐nitrophenol (4‐NP).     

Differentiating calcium carbonate polymorphs by surface analysis techniques—an XPS and TOF‐SIMS study

Calcium carbonate has evoked interest owing to its use as a biomaterial, and for its potential in biomineralization. Three polymorphs of calcium carbonate, i.e. calcite, aragonite, and vaterite were synthesized. Three conventional bulk analysis techniques, Fourier transform infrared (FTIR), X‐ray diffraction (XRD), and SEM, were used to confirm the crystal phase of each polymorphic calcium carbonate. Two surface analysis techniques, X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectroscopy (TOF‐SIMS), were used to differentiate the surfaces of these three polymorphs of calcium carbonate. XPS results clearly demonstrate that the surfaces of these three polymorphs are different as seen in the Ca(2p) and O(1s) core‐level spectra. The different atomic arrangement in the crystal lattice, which provides for a different chemical environment, can explain this surface difference. Principal component analysis (PCA) was used to analyze the TOF‐SIMS data. Three polymorphs of calcium carbonate cluster into three different groups by PCA scores. This suggests that surface analysis techniques are as powerful as conventional bulk analysis to discriminate calcium carbonate polymorphs. Copyright © 2008 John Wiley & Sons, Ltd.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Preparation and characterization of copper/silver bimetallic nanowires with core‐shell structure

Core‐shell copper/silver bimetallic nanowires were prepared by replacement reaction with citric acid and polyvinylpyrollidone at room temperature. A uniform silver coating was obtained by strictly controlling the molar ratio of Ag/Cu. The copper/silver composite was characterized by X‐ray diffraction, scanning electron microscopy, electron probe microanalysis and X‐ray photoelectron spectroscopy. Microscopic analysis shows that a well‐copper/silver core‐shell structure was formed. Thermo‐gravimetry and differential thermal analysis to the composite nanowires show that the silver coatings efficiently inhibit the oxidation of Cu. Copyright © 2015 John Wiley & Sons, Ltd.     

Engineering a Cu‐MOF Nano‐Catalyst by using Post‐Synthetic Modification for the Preparation of 5‐Substituted 1H‐Tetrazoles

A new nano scale Cu‐MOF has been obtained via post‐synthetic metalation by immersing a Zn‐MOF as a template in DMF solutions of copper(II) salts. The Cu‐MOF serves as recyclable nano‐catalyst for the preparation of 5‐substituted 1H‐tetrazoles via [3 + 2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post‐synthetic metalated MOF were characterized by FT‐IR spectroscopy, powder X‐ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X‐ray spectroscopy (EDX) techniques. The morphology and size of the nano‐catalyst were determined by field emission scanning electron microscopy (FE‐SEM).     

Electrically conductive acrylonitrile–butadiene rubber elastomers prepared by dopamine‐induced surface functionalization and metallization

A novel method for the preparation of electrical conductive surface silvered acrylonitrile–butadiene rubber (NBR) was developed. Dopamine was spontaneously oxide polymerized and deposited onto the surface of NBR. Electroless plating of silver was carried out on the poly(dopamine) (PDA)‐functionalized NBR surface. The composition of the NBR surface was studied by X‐ray photoelectron spectroscopy (XPS). XPS results showed that PDA was successfully deposited onto the NBR surface. The morphology of the NBR surface was observed by scanning electron microscopy (SEM). The SEM images showed that PDA had formed a distinctive layer ready for electroless deposition of silver. The catechol/quinone groups on the PDA molecular structure can be used as binding sites for silver ions. The silvered NBR showed high surface conductivity of 1.4 Ω. Copyright © 2011 John Wiley & Sons, Ltd.     

Uniformly Dispersed and Controllable Ligand‐Free Silver‐Nanoparticle‐Decorated TiO2 Nanotube Arrays with Enhanced Photoelectrochemical Behaviors

Homogeneously dispersed silver nanoparticles (AgNPs) were successfully decorated onto the surface of TiO₂ nanotube arrays (TNTA) by means of an in situ photoreduction method. TNTA films as supports exhibit excellent properties to prevent agglomeration of AgNPs, and they also avoid using polymer ligands, which is deleterious to enhancing the properties of the fabricated NPs. The silver particle size and its content could be controlled just by changing the immersion time. Detailed SEM and TEM analyses combined with energy‐dispersive X‐ray spectroscopy analyses with different immersion times (5, 10, 30, 60 min) have revealed the variation tendency. The prepared Ag/TNTA composite films were also characterized by XRD, X‐ray photoelectron spectroscopy, and high‐resolution TEM. The UV/Vis diffuse reflectance spectra displayed a redshift of the absorption peak with the growth of AgNPs. The photocurrent response and the photoelectrocatalytic degradation of methyl orange (MO) were used to evaluate the photoelectrochemical properties of the fabricated samples. The results showed that the photocurrent response and photoelectrocatalytic activity largely depended on the loaded Ag particle size and content. TNTA films with a diameter of 17.92 nm and silver content of 1.15 at % showed the highest photocurrent response and degradation rate of MO. The enhanced properties could be attributed to the synergistic effect between AgNPs and TiO₂. To make good use of this effect, particle size and silver content should be well controlled to develop the electron charge and discharge process during the photoelectrical process. Neither smaller nor larger AgNPs caused decreased photoelectrical properties.     

Evaluation of femtosecond LIBS for spectrochemical microanalysis of aluminium alloys

The analytical performance of femtosecond laser-induced breakdown spectroscopy (LIBS) for elemental microanalysis of aluminium alloys and for mapping precipitate distribution on the sample surface has been studied in detail. A Ti–sapphire laser system producing pulses of 130 fs at 800 nm was used to generate the laser-induced plasma. Multi-element microanalysis of commercially available aluminium alloys was performed in air at atmospheric pressure. Crater characteristics such as diameter and crater morphology were characterized by optical and scanning-electron microscopy. Scaling of plasma emission and limit of detection as a function of laser pulse energy was also investigated. Current experimental results are presented and are compared with previous nanosecond microLIBS measurements.     

Controlled Synthesis of Carbon‐Encapsulated Copper Nanostructures by Using Smectite Clays as Nanotemplates

Rhomboidal and spherical metallic‐copper nanostructures were encapsulated within well‐formed graphitic shells by using a simple chemical method that involved the catalytic decomposition of acetylene over a copper catalyst that was supported on different smectite clays surfaces by ion‐exchange. These metallic‐copper nanostructures could be separated from the inorganic support and remained stable for months. The choice of the clay support influenced both the shape and the size of the synthesized Cu nanostructures. The synthesized materials and the supported catalysts from which they were produced were studied in detail by TEM and SEM, powder X‐ray diffraction, thermal analysis, as well as by Raman and X‐ray photoelectron spectroscopy.     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.     

Synthesis of core‐shell silver–polyaniline nanocomposites by gamma radiolysis method

Core‐shell silver (Ag)–polyaniline (PAni) nanocomposites have been synthesized by the in‐situ gamma radiation‐induced chemical polymerization method. Aqueous solution of aniline, a free‐radical oxidant, and/or silver metal salt were irradiated by γ‐rays. Reduction of the silver salt in aqueous aniline leads to the formation of silver nanoparticles which in turn catalyze oxidation of aniline to polyaniline. The resultant Ag‐PAni nanocomposites were characterized by using different spectroscopy analyses like X‐ray photoelectron, UV–visible, and infrared spectroscopy. The optical absorption bands revealed that the bands at about 400 nm are due to the presence of nanosilver and the blue‐shifted peak at ～ 555 nm is due to the presence of metallic silver within the PAni matrix. X‐ray diffraction pattern clearly indicates the broad amorphous polymer and the sharp metal peaks. Scanning electron microscopy and transmission electron microscopy of the nanocomposite showed a uniform size distribution with spherical and granular morphology. Thermogravimetric analysis revealed that the composites have a higher degradation temperature than polyaniline alone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5741–5747, 2007     

Surface characterization of medieval silver coins minted by the early Piasts: FT‐IR mapping and SEM/EDX studies

An investigation of a numismatic collection of silver denarii from the early Piast dynasty was conducted using Fourier‐transform infrared spectroscopy. The studied coins, minted between 995 and 1020 ad under the rules of Boleslaus the Brave and Mieszko II Lambert, belong to the collection of the National Museum in Kraków. Fourier‐transform infrared spectroscopy imaging and mapping have been used for recording a visual image of the surface chemistry based on vibrational spectra and accurately representing the distribution of chemical compounds, respectively. Additionally, scanning electron microscopy coupled to energy‐dispersive X‐ray analysis was used to study the surface topography of the coins and characterize their elemental composition. Differences in the distribution of the identified chemical compounds were detected in heterogeneous areas of the denarii. Corrosion effects, associated to many factors including the alloy composition, the metallographic structure, the manufacturing processes, and the environment were also observed and identified.     

Application of surface science techniques to study a gilded Egyptian funerary mask: A multi-analytical approach

A wide range of analytical techniques has been used to study an Egyptian funerary mask of the Ptolemaic period (305-30 bc ). Secondary electron (SE) and back-scattering (BS) images, recorded by a scanning electron microscope (SEM), provided a detailed representation of the metallurgical techniques used to construct the gilded mask. It is confirmed, that the golden leaf used to cover the mask is the product of an antique refinery practice, so called, cementation process of naturally occurring alloy of gold and silver, namely electrum. Complementary results of SEM-electron dispersion spectroscopy (EDS) and electron probe microanalysis (EPMA)–wavelength dispersion spectroscopy (WDS) provided chemical compositions of the golden leaf as well as in the plaster base of the mask. X-ray photoemission spectroscopy (XPS) revealed the presence of Au, Ag, Si, S, Cl, Ca, and N, in addition to O and C. Relative concentration of Au/Ag at the surface has been measured by XPS to be 70% to 30%. XPS depth profiling verified silver-enrichment at the surface, as ratio of gold to silver is measured to be 80% to 20% at the depth of 15 nm. XPS chemical mapping images of gold and silver confirmed a rather inhomogeneous character of Au/Ag relative concentration at the surface. The main diffraction peaks in the X-ray diffraction (XRD) spectrum coincide with diffraction peaks of pure gold, silver metals, and magnesium calcite Mg_0.03Ca_0.97CO₃. Whereas, Raman spectroscopy results implied the existence of Ag₂S, a tarnishing compound, on the golden area of the mask.