Electrochemical and Photoelectrochemical Study of Self‐assembled Monolayer of Phytic Acid on Brass

Phytic acid is an environment-friendly reagent for processing metals. The anticorrosion and inhibiting mechanism for phytic acid monolayers self-assembled on a brass (HSn70-1) electrode has been investigated by using electrochemical and photocurrent response methods. The electrochemical measurements indicate that phytic acid is liable to form surface complexes on the brass electrode, and the self-assembled monolayers (SAM) change the structure of the electric double-layer and shift the potential of zero charge positively. The photochemical measurement indicates that the brass electrode shows a p-type photoresponse owing to the formation of a Cu2O layer on its surface, and the presence of SAM weakens significantly the photoresponse, suggesting an excellent effect on anticorrosion, which is consistent with the EIS and polarization curve measurements. Adsorption of phytic acid was found to be typical of chemisorption, which can be reasonably described on the basis of the Langmuir isotherm.     

Formation of alkane‐phosphonic acid self‐assembled monolayers on alumina: an in situ SPR study

The formation process of n‐alkane phosphonic acid CH₃ (CH₂)_n?1 PO(OH)₂ (n = 10,12,14,18) self‐assembled monolayers (SAMs), deposited from ethanol solutions on aluminum oxide, has been monitored in situ using surface plasmon resonance (SPR) spectroscopy. In addition, the two‐solvent approach is used to obtain both film thickness and refractive index of the fully formed adsorbed layers. A densely packed adsorbed layer is formed only for the longest molecules with n = 18. The chain length and solution concentration dependence of formation kinetics are studied, and the existence of two distinct kinetic steps is revealed. Fittings of the experimental results with various kinetic models are performed. Our analysis suggests that during the first kinetic step, a transition from a lying‐down to a standing‐up phase takes place, and the growth of this standing‐up phase is governed by second‐order kinetics. The second slow kinetic step is described by a modified first‐order Langmuir law. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and functions of self‐assembled monolayers of helix peptides

Self‐assembled monolayers (SAMs) of helix peptides oriented vertically to a gold surface were prepared. Negative surface potentials of a few hundred millivolts were observed for the helix peptide SAMs when they were immobilized on gold through the N terminal of the peptides. However, positive surface potentials were generated in the helix peptide SAMs when the N terminal of the peptides was directed the opposite way. The large dipole moment of the helical peptide was thought to be the major factor for generation of the surface potential. The effect of the dipole moment on the electron transfer through the helix peptide SAMs was investigated. Photocurrent generation by photoexcitation of the N‐ethylcarbazolyl group of the peptide SAMs was accelerated by the dipole moment directed toward the gold substrate. Helical peptides were thus shown to be a suitable medium for electron transfer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4826–4831, 2000     

Formation and electrochemical desorption of self‐assembled monolayers as studied by ToF‐SIMS

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to study a number of processes involving thiol‐based self‐assembled monolayers (SAMs) on nontextured (polycrystalline) gold (Au) films deposited on Si wafers. ToF‐SIMS turned out to be a convenient and versatile semiqualitative technique which readily verified electrochemical desorption of a SAM and formation of another SAM on the same sample via reincubation with another thiol. The technique, allowing one to follow simultaneously more than one species on the surface, showed that any formation of a mixed SAM on surfaces which did not undergo electrolysis was negligible with the applied time scale (minutes). Copyright © 2010 John Wiley & Sons, Ltd.     

Self‐assembled Azobenzenethiol Monolayer on Electrode Surfaces: Effect of Photo‐switching on the Surface and Electrical Property

Azobenzenethiol molecules carrying different para‐substituents were used to form mixed monolayers with n‐alkanethiol molecules on Au and Ag surfaces. UV‐ and visible light irradiation of the surfaces resulted in reversible alternation of contact angle and characteristic infrared absorption peak intensities, as well as the work function of the metal surfaces. The alternations can be correlated with the cis‐trans isomerization of the azobenzene moieties at the surface. Electron transport from the metal electrode to a redox center in a contacting solution was measured and analyzed based on the change in the work function of the electrode as well as the monolayer film structure upon isomerization.     

Simultaneous Determination of Dopamine and Ascorbic Acid at an In‐Site Functionalized Self‐Assembled Monolayer on Gold Electrode

The in‐site functionalization of 4‐aminothiophenol (4‐ATP) self‐assembled monolayer on gold electrode at physiological pH yields a redox active monolayer of 4′‐mercapto‐N‐phenylquinone diimine (MNPD). The functionalized electrode exhibits excellent electrocatalytic responses towards dopamine (DA) and ascorbic acid (AA), reducing the overpotentials by about 0.22 V and 0.34 V, respectively, with greatly enhanced current responses. Due to its different catalytic activities toward DA and AA, the modified electrode resolves the overlapping voltammetric responses of DA and AA into two well‐defined voltammetric peaks by differential pulse voltammetry (DPV), which can be used for the simultaneous determination of these species in a mixture. The catalytic peak current obtained from DPV was linearly related to DA and AA concentration in the ranges of 5.0×10^?6?1.25×10^?4 M and 8.0×10^?6?1.3×10^?4 M with correlation coefficient of 0.999 and 0.998, respectively. The detective limits (3σ) for DA and AA were found to be 1.2×10^?6 M and 2.4×10^?6 M, respectively. The modified electrode shows good sensitivity, selectivity and stability, and has been applied to the determination of DA and AA simultaneously in samples with satisfactory results.     

Ionic liquid self‐assembled monolayer and ion exchange for surface force control

Adhesion and lateral force were controlled by the formation of a self‐assembled monolayer combined with the surface ion exchange of ionic liquids on a silicon surface. In this study, the functionalized imidazolium ionic liquids were designed and synthesized with the aim of controlling surface force. N‐[3‐(Trimethoxylsilyl)propyl] ethylenediamine molecules were first self‐assembled onto a surface as an anchor layer and then 1‐propionic acid‐3‐methylimidazolium chloride were successfully grafted onto the amino‐modified surface. The surface force was changed by surface ion exchange in various anionic solutions. The self‐assembly and ion exchange processes were detected by means of attenuated total reflectance‐Fourier transform infrared spectrometry and further confirmed by X‐ray photoelectron spectra. Adhesion and friction behaviors were systematically investigated by atomic force/friction force microscope. The results indicated that anions played a great role in determining surface properties. Furthermore, surface adhesion and friction can be possibly quantitatively determined by the counter‐anions on the surface. Copyright © 2011 John Wiley & Sons, Ltd.     

Mixed‐monolayer of N‐hydroxysuccinimide‐terminated cross‐linker and short alkanethiol to improve the efficiency of biomolecule binding for biosensing

The goal of this study was to use a novel surface chemistry for modifying gold surfaces to decrease the steric hindrance, minimize the nonspecific bindings while providing directed immobilization of proteins for advancing the transducer property and to provide a biosensing platform for surface plasmon resonance (SPR) applications. Mixed self‐assembled monolayers (mSAMs) were prepared using 3,3′‐Dithiodipropionic acid di (N‐hydroxysuccinimide ester) (DSP) and 6‐mercapto‐1‐hexanol (MCH) and the selected model proteins bovine serum albumin (BSA) and lysozyme were tested for binding efficiency. First, binding of these two proteins at constant concentration to different DSP:MCH mSAMs were compared to deduce the best molar ratio for forming mSAM using a continuous flow system coupled to SPR. Coincidently the maximum protein binding DSP:MCH mSAM were the same for both proteins. The change in Response Unit (∆RU) signal due to protein binding between DSP SAM and maximum protein binding DSP:MCH mSAM for lysozyme binding was more in comparison to BSA binding. Second, the effect of BSA and lysozyme concentration on binding efficiency to maximum protein binding DSP:MCH mSAM were compared and discussed. Lysozyme and BSA were shown to reach saturations on the same monolayer at concentrations of 5.7x10⁻⁵ and 8.96x10⁻⁶ [M] respectively, hence the molar ratio for limit concentrations is 6:1. The DSP SAM, MCH SAM, and DSP:MCH mSAMs where maximum and minimum protein binding occurs were also characterized with XPS and Attenuated total reflectance‐Fourier transform infrared (ATR‐FTIR) spectroscopy. Blank gold surface, maximum protein binding DSP:MCH mSAM and BSA immobilized DSP:MCH mSAM on gold surface were also investigated utilizing tapping mode AFM.     

QCM 表面自组装胱氨酸1，3－桥连杯[4]芳烃膜用于识别气相丁胺

Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.     

Immobilization of atrazine on gold,a first step towards the elaboration of an indirect immunosensor: characterization by XPS and PM‐IRRAS

As part of our long‐term goal to design a novel type of immunosensor based on IR transduction, we devised two strategies to immobilize derivatives of the herbicide atrazine on the surface of planar gold substrates. Both strategies take advantage of the well‐known formation of self‐assembled monolayers of thiolates via spontaneous chemisorption of thiols or disulphides on noble metal surfaces. The first strategy involved the direct chemisorption of a disulphide derivative of atrazine, while the second strategy was based on the covalent attachment of a polymer tethered with atrazine derivatives to a previously adsorbed thiolate carrying a carboxylic acid head group. The resulting organic thin films on gold were characterized by polarization modulation infrared reflection‐absorption spectroscopy (PM‐IRRAS) and XPS. The binding of a polyclonal anti‐atrazine antibody to both sensing layers was also tested and compared. It appeared that specific molecular recognition occurred only on the atrazine disulphide sensing layer. Copyright © 2006 John Wiley & Sons, Ltd.     

Nanoparticulate Hollow TiO2 Fibers as Light Scatterers in Dye‐Sensitized Solar Cells: Layer‐by‐Layer Self‐Assembly Parameters and Mechanism

Hollow structures show both light scattering and light trapping, which makes them promising for dye‐sensitized solar cell (DSSC) applications. In this work, nanoparticulate hollow TiO₂ fibers are prepared by layer‐by‐layer (LbL) self‐assembly deposition of TiO₂ nanoparticles on natural cellulose fibers as template, followed by thermal removal of the template. The effect of LbL parameters such as the type and molecular weight of polyelectrolyte, number of dip cycles, and the TiO₂ dispersion (amorphous or crystalline sol) are investigated. LbL deposition with weak polyelectrolytes (polyethylenimine, PEI) gives greater nanoparticle deposition yield compared to strong polyelectrolytes (poly(diallyldimethylammonium chloride), PDDA). Decreasing the molecular weight of the polyelectrolyte results in more deposition of nanoparticles in each dip cycle with narrower pore size distribution. Fibers prepared by the deposition of crystalline TiO₂ nanoparticles show higher surface area and higher pore volume than amorphous nanoparticles. Scattering coefficients and backscattering properties of fibers are investigated and compared with those of commercial P25 nanoparticles. Composite P25–fiber films are electrophoretically deposited and employed as the photoanode in DSSC. Photoelectrochemical measurements showed an increase of around 50 % in conversion efficiency. By employing the intensity‐modulated photovoltage and photocurrent spectroscopy methods, it is shown that the performance improvement due to addition of fibers is mostly due to the increase in light‐harvesting efficiency. The high surface area due to the nanoparticulate structure and strong light harvesting due to the hollow structure make these fibers promising scatterers in DSSCs.     

Layer‐by‐Layer Nano‐Encapsulation of Microbes: Controlled Cell Surface Modification and Investigation of Substrate Uptake in Bacteria

LbL nano self‐assembly coating of A. vinosum with different polyelectrolyte combinations is presented as an example to investigate substrate uptake in bacteria. The effects of surface charge and the formation of a physical barrier provides new insights in the contact mechanisms between the cell surface and insoluble elemental sulfur. Furthermore, uptake of sulfide by encapsulated cells was investigated. Growth experiments of coated cells showed that surface charge did neither affect sulfide uptake nor the contact formation between the cells and solid sulfur. However, increasing layers slowed or inhibited the uptake of sulfide and elemental sulfur. This work demonstrates how defining surface properties of bacteria has potential for microbiological and biotechnological applications.

     

Layer‐by‐Layer Spin Self‐Assembled Hole Injection Layers Containing a Perfluorinated Ionomer for Efficient Polymer Light‐Emitting Diodes

Deposition of hole injection layers including a perfluorinated ionomer has been demonstrated using layer‐by‐layer spin self‐assembly for enhanced device efficiency and lifetime in PLEDs. We show that the LBL spin self‐assembled thin films enable to control work functions of indium‐tin oxide anodes by changing the PFI concentration and that a resulting green‐emitting device has an enhanced luminescence efficiency and 18 times longer half lifetime than a device using a conventional HIL. We also fabricate a gradient of energy levels by the LBL self‐assembly of the PFI that results in a work function of 5.74 eV, which can be used to improve carrier injection even for an emitting layer whose ionization potential is over 5.7 eV.

     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Robust Self‐Assembled Monolayers of RuII and OsII Polypyridines on Gold Surfaces: Exploring New Potentials

Functional monolayers : Ru^II and Os^II bis‐terpyridine complexes have been attached through a piperazine‐supported dithiocarbamate to a gold substrate (see picture). The robust tether, and the favourable reduction in oxidation potential induced by the electron‐rich piperazine result in self‐assembled monolayers with excellent reversible redox behaviour and exceptional stability.

     

Polycrystalline Gold Electrodes: A Comparative Study of Pretreatment Procedures Used for Cleaning and Thiol Self‐Assembly Monolayer Formation

The influence of different surface pretreatment procedures on the electrochemical response of a polycrystalline gold electrode was evaluated. Mechanical polishing with slurry alumina (M), chemical oxidation with H₂SO₄/H₂O₂ (C), electrochemical polishing (potential cycling between ?0.1 V and 1.2 V vs. SCE) (E), chemical reduction with ethanol, and combinations among these treatments were employed to change the surface electrode characteristics. The efficiency of the proposed pretreatments was evaluated by electrochemical responses towards the redox couple ferri(II/III)‐ammonium sulfate and by the formation of a self‐assembly monolayer of 3‐mercaptopropionic acid (3 MPA SAM) on gold electrodes. The procedure (C) allowed important gold surfaces activation. Using procedures (C) and (E) the roughness of polycrystalline gold surfaces was significantly minimized and more reproducible surfaces could be obtained. From the profile of reductive desorption of 3 MPA SAM it was possible to verify that reduced gold surfaces generated better packed monolayers than oxidized ones and a comparative study using CV and DPV techniques showed that between the two desorption peaks, the one localized at more negative potential values corresponds to the cleavage of Au‐S bond from the chemisorbed thiol. In general, the improvement in the studied electrochemical responses could not only be attributed to an increase in the real surface area of the electrode, but to the chemical surface states set off by the pretreatment procedure.     

Self‐assembled magnetic nanoparticle supported zeolitic imidazolate framework‐8: An efficient adsorbent for the enrichment of triazine herbicides from fruit,vegetables, and water

Zeolitic imidazolate frameworks have positive surface charges and high adsorption capabilities. In this work, zeolitic imidazolate frameworks‐8 and negatively charged magnetic nanoparticles were self‐assembled by electrostatic attraction under sonication. The extraction performance of the synthesized hybrid material was evaluated by using it as a magnetic adsorbent for the enrichment of triazine herbicides in various sample matrices prior to analysis using ultrafast liquid chromatography. The main parameters, that is, extraction time, adsorbent dosage, salt concentration, and desorption conditions, were evaluated. Under the optimum conditions, good linear responses from 2.5 to 200 ng/mL for atrazine (simazine) and 1 to 200 ng/mL for prometryn (ametryn), with correlation coefficients (R ²) higher than 0.9992 were obtained. The detection limits of the method (S/N = 3) were 0.18–0.72 ng/mL. The proposed method was successfully used to determine triazine herbicides in six samples, namely, apple, pear, strawberry, pakchoi, lettuce, and water. The amounts of simazine in all the fruit and vegetable samples were 10.8–25.2 ng/mL. The recoveries of all the analytes were 88.0–101.9%, with relative standard deviations of less than 8.8%.     

Solution‐Processable Flower‐Shaped Hierarchical Structures: Self‐Assembly,Formation, and State Transition of Biomimetic Superhydrophobic Surfaces

Superhydrophobic surfaces inspired by biological microstructures attract considerable attention from researchers because of their potential applications. In this contribution, two kinds of microscale flower‐shaped morphologies with nanometer petals formed from the hierarchical self‐assembly of benzothiophene derivatives bearing long alkyl chains have been developed as superhydrophobic surfaces. The intermediate stages of the assemblies demonstrated a new formation mechanism for such flower‐shaped morphologies. The hierarchical morphologies of the film exhibited excellent water‐repelling characteristics as superhydrophobic surfaces, which were prepared by means of a simple solution process. The transition process from the Cassie state to Wenzel state was easily realized owing to the slight microstructural differences in the two kinds of flowers caused by their different chemical structures. The superhydrophobicity of such functional materials might be beneficial for applications in electrical devices in which the presence of water would influence their performance.     

Preparation and characterization of layer‐by‐layer self‐assembly membrane based on sulfonated polyetheretherketone and polyurethane for high‐temperature proton exchange membrane

A concept of preparing high‐temperature proton exchange membranes with layer‐by‐layer (LBL) self‐assembly technique was proposed and the sulfonated polyetheretherketone (SPEEK) and polyurethane (PU) with 200 LBL deposition cycles denoting (SPEEK/PU)₂₀₀ membrane was prepared in this research. Owing to the strong electrostatic interaction between ? group in SPEEK and ? C? N⁺ group in PU, (SPEEK/PU)₂₀₀ membrane with LBL self‐assembly structure showed a favorable structural stability. The phosphoric acid (PA)‐doped (SPEEK/PU)₂₀₀ membrane showed a higher proton conductivity relative to PA doped SPEEK/PU membrane by solution casting method (SPEEK/PU)₂₀₀/40%PA membrane possessed a proton conductivity value of 2.90 × 10^?2 S/cm at 150 °C under anhydrous conditions. The LBL self‐assembly structure provided a possibility to reduce the negative effect from polymer skeleton blocking charge carrier species even immobilizing protons. Moreover, the (SPEEK/PU)₂₀₀ membrane presented the particularly noteworthy mechanical property even with PA doping. The tensile stress values at break were 72.8 and 24.1 MPa, respectively, for (SPEEK/PU)₂₀₀ and (SPEEK/PU)₂₀₀/40%PA membrane at room temperature, which were obviously higher than the reported values of 15.9 and 2.81 MPa for SPEEK/PU and SPEEK/PU/60%PA membrane. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3446–3454