Efficient and Scalable Production of 2D Material Dispersions using Hexahydroxytriphenylene as a Versatile Exfoliant and Dispersant

Thin‐layer 2D materials have been attracting enormous interest, and various processes have been investigated to obtain these materials efficiently. In view of their practical applications, the most desirable source for the preparation of these thin‐layer materials is the pristine bulk materials with stacked layers, such as pristine graphite. There are many options in terms of conditions for the exfoliation of thin‐layer materials, and these include wet and dry processes, with or without additives, and the kind of solvent. In this context, we found that the versatile exfoliant hexahydroxytriphenylene works efficiently for the exfoliation of typical 2D materials such as graphene, MoS₂, and hexagonal boron nitride (h‐BN) by both wet and dry processes by using sonication and ball milling, respectively, in aqueous and organic solvents. As for graphene, stable dispersions with relatively high concentrations (up to 0.28 mg mL^?1) in water and tetrahydrofuran were obtained from graphite in the presence of hexahydroxytriphenylene by a wet process with the use of bath sonication and by a dry process involving ball milling. Especially, most of the graphite was exfoliated and dispersed as thin‐layer graphene in both aqueous and organic solvents through ball milling, even on a large scale (47–86 % yield). In addition, the exfoliant was easily removed from the precipitated composite by heat treatment without disturbing the graphene structure. Bulk MoS₂ and h‐BN were also exfoliated by both wet and dry processes. Similar to graphene, dispersions of MoS₂ and h‐BN of high concentrations in water and DMF were produced in high yields through ball milling.     

Determination of ZnO(0001) surface termination by x‐ray photoelectron spectroscopy at photoemission angles of 0° and 70°

We present an XPS method to determine the termination of the ZnO(0001) surface. By measuring O 1s and Zn 2p_3/2 core‐level x‐ray photoelectron spectra at photoemission angles of 0° and 70° and comparing the intensity ratio (I_O1s/I_Zn2p3)_θ=0/(I_O1s/I_Zn2p3)_θ=70, the Zn and O termination can be distinguished. Calculations show that these two terminations have intensity ratios differing by ～17%. This difference is not affected by a contamination layer provided that the contamination layer thickness is the same for these two differently terminated surfaces. Although this determination method prefers a clean ZnO(0001) surface (in situ measurement), it seems also feasible for surfaces with known contamination layer thickness (ex situ measurement). We have measured ex situ ZnO(0001)‐Zn, ZnO(000&1macr;)‐O single crystals and an epitaxial ZnO film deposited on Al₂O₃(0001). The measured intensity ratios of the first two samples agree with the calculated values for a 0.2 and 0.26 nm contamination layer, respectively. The intensity ratio and the O 1s contamination component intensity of the epitaxial ZnO film are close to those of the ZnO(0001)‐Zn single crystal thus pointing at Zn termination of the film. Copyright © 2004 John Wiley & Sons, Ltd.     

Compact plasma source for removal of hydrocarbons for surface analysis

A low–energy, constricted‐anode Anders‐type plasma source was built and tested for the chemical removal of adventitious carbon on surfaces. Oxygen plasma, generated in the source, extends to the sample surface through an aperture in the anode. This plasma reacts with surface hydrocarbons and removes them in less than a minute without influencing the intrinsic surface stoichiometry of nonoxidizing samples such as minerals, glasses, and metal oxides. Adventitious carbon removal is critical for accurate binding energy determination and quantitative measurements in XPS and AES, particularly in multicomponent materials. We measure the plasma to be composed primarily of O⁺ and O₂⁺, with minor H⁺, H₂⁺, and O⁺⁺ components. Ion energy distributions were measured for O⁺ and O⁺⁺ and show all emitted ions have energies less than 50 eV, confirming chemical desorption as the primary removal mechanism. The plasma source, easily built ‘in house’, is compact and can be mounted on a 2.75‐in flange for in situ specimen cleaning prior to surface analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

In situ infrared spectroscopic studies of ultrathin inorganic film growth on zinc in non‐polymerizing cold plasmas

The effect of cold plasmas of oxygen, hydrogen, water and carbon dioxide on zinc samples was investigated. Oxygen plasma is known for its cleaning effect, hydrocarbons and water are removed from metal surfaces and the oxide layer is thickened. It was found that other oxygen‐containing gases had a similar effect. In addition, surface layers of other compounds were produced. The samples were investigated using XPS, Kelvin probe measurements and in situ infrared reflection absorption spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

Cleaning requirements for silica‐coated sensors used in optical waveguide lightmode spectroscopy

Optical waveguide lightmode spectroscopy (OWLS), based on the incoupling of laser light into a waveguide sensor by an optical grating, allows for the in situ measurement of protein adsorption. Few reports have described cleaning methods for the surfaces of such sensors, and in this investigation, we compare common methods for cleaning of silica surfaces in relation to their effectiveness for cleaning silica‐coated waveguide sensors used in OWLS. For this purpose, atomic force microscopy (AFM) analysis of surface morphology and OWLS detection of protein adsorption kinetics were used to evaluate waveguide sensors before and after cleaning. While AFM line scans showed a substantial increase in average waveguide peak‐to‐valley height after RCA cleaning relative to all other methods tested, chemical etching owing to the alkaline component of the rolling circle amplification method rendered the waveguide unusable for detection of protein adsorption with OWLS. A revised method, based on replacement of the alkaline step with immersion in sodium dodecyl sulfate, was not only effective at cleaning OWLS waveguides off‐the‐shelf but also showed excellent protein adsorption reproducibility after ex situ cleaning. Moreover, the revised method showed excellent reproducibility when applied in situ, between repeated adsorption‐elution cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Controlled Gas Exfoliation of Boron Nitride into Few‐Layered Nanosheets

The controlled exfoliation of hexagonal boron nitride (h‐BN) into single‐ or few‐layered nanosheets remains a grand challenge and becomes the bottleneck to essential studies and applications of h‐BN. Here, we present an efficient strategy for the scalable synthesis of few‐layered h‐BN nanosheets (BNNS) using a novel gas exfoliation of bulk h‐BN in liquid N₂ (L‐N₂). The essence of this strategy lies in the combination of a high temperature triggered expansion of bulk h‐BN and the cryogenic L ‐N₂ gasification to exfoliate the h‐BN. The produced BNNS after ten cycles (BNNS‐10) consisted primarily of fewer than five atomic layers with a high mass yield of 16–20 %. N₂ sorption and desorption isotherms show that the BNNS‐10 exhibited a much higher specific surface area of 278 m² g^?1 than that of bulk BN (10 m² g^?1). Through the investigation of the exfoliated intermediates combined with a theoretical calculation, we found that the huge temperature variation initiates the expansion and curling of the bulk h‐BN. Subseqently, the L ‐N₂ penetrates into the interlayers of h‐BN along the curling edge, followed by an immediate drastic gasification of L ‐N₂, further peeling off h‐BN. This novel gas exfoliation of high surface area BNNS not only opens up potential opportunities for wide applications, but also can be extended to produce other layered materials in high yields.     

Strong and Superhydrophobic Wood with Aligned Cellulose Nanofibers as a Waterproof Structural Material†

Lightweight structural materials are important for the energy efficiency of applications, particularly those in the building sector. Here, inspired by nature, we developed a strong, superhydrophobic, yet lightweight material by simple in situ growth of nano‐SiO₂ and subsequent densification of the wood substrate. In situ generation of SiO₂ nanoparticles both inside the wood channels and on the wood surfaces gives the material superhydrophobicity, with static and dynamic contact angles of 159.4^o and 3^o, respectively. Densification of the wood to remove most of the spaces among the lumen and cell walls results in a laminated, dense structure, with aligned cellulose nanofibers, which in turn contributes to a high mechanical strength up to 384.2 MPa (7‐times higher than natural wood). Such treatment enables the strong and superhydrophobic wood (SH‐Wood) to be stable and have excellent water, acid, and alkaline resistance. The high mechanical strength of SH‐Wood combined with its excellent structural stability in harsh environments, as well its low density, positions the strong and superhydrophobic wood as a promising candidate for strong, lightweight, and durable structural materials that could potentially replace steel.     

h‐BN Nanosheets as 2D Substrates to Load 0D Fe3O4 Nanoparticles: A Hybrid Anode Material for Lithium‐Ion Batteries

h‐BN, as an isoelectronic analogue of graphene, has improved thermal mechanical properties. Moreover, the liquid‐phase production of h‐BN is greener since harmful oxidants/reductants are unnecessary. Here we report a novel hybrid architecture by employing h‐BN nanosheets as 2D substrates to load 0D Fe₃O₄ nanoparticles, followed by phenol/formol carbonization to form a carbon coating. The resulting carbon‐encapsulated h‐BN@Fe₃O₄ hybrid architecture exhibits synergistic interactions: 1) The h‐BN nanosheets act as flexible 2D substrates to accommodate the volume change of the Fe₃O₄ nanoparticles; 2) The Fe₃O₄ nanoparticles serve as active materials to contribute to a high specific capacity; and 3) The carbon coating not only protects the hybrid architecture from deformation but also keeps the whole electrode highly conductive. The synergistic interactions translate into significantly enhanced electrochemical performances, laying a basis for the development of superior hybrid anode materials.     

Functionalization and Dispersion of Hexagonal Boron Nitride (h‐BN) Nanosheets Treated with Inorganic Reagents

A mixture of bulk hexagonal boron nitride (h‐BN) with hydrazine, 30 % H₂O₂, HNO₃/H₂SO₄, or oleum was heated in an autoclave at 100 °C to produce functionalized h‐BN. The product formed stable colloid solutions in water (0.26–0.32 g L ^?1) and N,N‐dimethylformamide (0.34–0.52 g L ^?1) upon mild ultrasonication. The yield of “soluble” h‐BN reached about 70 wt %. The dispersions contained few‐layered h‐BN nanosheets with lateral dimensions in the order of several hundred nanometers. The functionalized dispersible h‐BN was characterized by IR spectroscopy, X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). It is shown that h‐BN preserves its hexagonal structure throughout the functionalization procedure. Its exfoliation into thin platelets upon contact with solvents is probably owing to the attachment of hydrophilic functionalities.     

Surface modification and characterization of SEBS films obtained by in situ and ex situ oxidization with potassium permanganate

The surface morphologies and compositions of the asymmetric films of polystyrene‐b‐poly(ethylene‐co‐butylene)‐b‐polystyrene (SEBS) prepared by in situ and ex situ oxidization with the KMnO₄ aqueous solution and KMnO₄/H₂SO₄ mixed solution were investigated by using scanning electron microscope, atomic force microscope (AFM), X‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance infrared spectroscopy (ATR‐FTIR). The effect of the oxidization reagents on morphological changes and the influence of in situ and ex situ preparation methods on surface compositions were discussed. Different from the in situ oxidation by degrading the copolymers to form a gradient film, the ex situ oxidation preferentially degraded the uppermost layer of the film. Although both the KMnO₄ oxidation and the KMnO₄/H₂SO₄ oxidation gave hierarchical structures, distinctive differences were found that large ridges and smaller granules were fabricated in the former film and the latter produced large and deep ravines and fine sponge‐like morphologies. Additionally, the oxygen concentration and the oxo‐species implanted by these oxidation treatments were characterized and evaluated to provide a quantitative comparison. Oxygen, as well as manganese was found to be implanted in the surface layer of the oxidized film, forming predominantly O? C and O? C?O groups, as well as a small fraction of O? H and Mn? O compounds. Changes in contact angle of water on these films and total surface oxygen content are related but not directly. The hystereses of water contact angle at a value of 119 ± 3° due primarily to surface roughness and at a value of 63 ± 3° due primarily to chemical heterogeneity are led by different oxidation degrees and oxidation methods. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Deposition of polysiloxane‐like nanofilms onto an aluminium alloy by plasma polymerized hexamethyldisiloxane: characterization by XPS and contact angle measurements

In this work, aluminium (Alclad 2024‐T3) substrates were cleaned by an r.f. (13.56 MHz) plasma, using argon (Ar), oxygen (O₂) and a mixture of O₂/Ar (50:50) gases. The effectiveness of plasma cleaning was checked in situ using X‐ray photoelectron spectroscopy (XPS) and ex situ using water contact angle measurements. XPS O/Al surface atomic ratios are in excellent agreement with those of the crystalline boehmite and the pseudoboehmite. Oxygen O 1s peak‐fitting was used to quantify the proportion of hydroxyl ions and the functional composition on the aluminium surface: the surface cleaned with O₂ plasma contains 50% of aluminium hydroxides, the ones cleaned with Ar plasma and with Ar/O₂ plasma contain, respectively, 25 and 37% hydroxyl ions. The binding energy separation between Al 2p and O 1s is characteristic of AlO(OH). Thin SiO_x films were subsequently deposited from a mixture of hexamethyldisiloxane (HMDSO) and oxygen. In the absence of oxygen, a hydrophobic (Θ≥ 100° ) film characteristic of polydimethylsiloxane (PDMS) is formed: polysiloxane‐like thinner films (SiO_x) are obtained with the introduction of oxygen. XPS and contact angle measurements confirmed both the composition and the structure of these films. More importantly, contact angle measurements using different liquids and interpreted with the van Oss‐Good‐Chaudhury theory allowed determination of the surface free energy of the deposited films: the calculated values of surface tension of the film formed from HMDSO/O₂: (50/50) are in excellent agreement with those of reference silica‐based materials such as a silicon wafer and cleaned glass. Copyright © 2007 John Wiley & Sons, Ltd.     

Nanocrystalline‐Graphene‐Tailored Hexagonal Boron Nitride Thin Films

Unintentionally formed nanocrystalline graphene (nc‐G) can act as a useful seed for the large‐area synthesis of a hexagonal boron nitride (h‐BN) thin film with an atomically flat surface that is comparable to that of exfoliated single‐crystal h‐BN. A wafer‐scale dielectric h‐BN thin film was successfully synthesized on a bare sapphire substrate by assistance of nc‐G, which prevented structural deformations in a chemical vapor deposition process. The growth mechanism of this nc‐G‐tailored h‐BN thin film was systematically analyzed. This approach provides a novel method for preparing high‐quality two‐dimensional materials on a large surface.     

Sequential C−H Borylation and N‐Demethylation of 1,1′‐Biphenylamines: Alternative Route to Polycyclic BN‐Heteroarenes

Described herein is an unprecedented access to BN‐polyaromatic compounds from 1,1′‐biphenylamines by sequential borane‐mediated C(sp²)?H borylation and intramolecular N‐demethylation. The conveniently in situ generated Piers’ borane from a borinic acid reacts with a series of N,N‐dimethyl‐1,1′‐biphenyl‐2‐amines in the presence of PhSiH₃ to afford six‐membered amine‐borane adducts bearing a C(sp²)?B bond at the C2′‐position. These species undergo an intramolecular N‐demethylation with a B(C₆F₅)₃ catalyst to provide BN‐isosteres of polyaromatics. According to computational studies, a stepwise ionic pathway is suggested. Photophysical characters of the resultant BN‐heteroarenes shown them to be distinctive from those of all‐carbon analogues.     

Anodic silver (II) oxides investigated by combined electrochemistry,ex situ XPS and in situ X‐ray absorption spectroscopy

Silver (II) oxide layers (AgO) were prepared by anodic oxidation of pre‐oxidized, Ag₂O‐covered silver electrodes in 1 M NaOH (pH 13.8). The oxidized electrodes were investigated using a combination of electrochemical techniques, ex situ X‐ray photoelectron spectroscopy (XPS) and in situ surface‐sensitive grazing incidence X‐ray absorption spectroscopy (EXAFS) under full potential control. The application of these different techniques leads to a detailed, consistent picture of the anodic silver (II) oxide layer formation. The experiments have shown that the chemical composition of the AgO layer varies significantly with oxidation potential, revealing a decreasing oxygen deficiency with increasing anodization potential and oxidation time. XPS as well as EXAFS experiments support the interpretation of the oxide as a mixed valence Ag ⁺ Ag^{3 +} O₂ with different contributions of Ag ⁺ and Ag^{3 +} species, depending on potential and anodization time. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel epoxy resins‐filled microcapsules with organic/inorganic hybrid shell for the self‐healing of high performance resins

Novel microcapsules (MCs) with organic/inorganic hybrid shell were successfully fabricated using epoxy resin as core material and nano boron nitride (BN) and mesoporous silica (SBA‐15) as inorganic shell materials in aqueous solution containing a water‐compatible epoxy resin curing agent. The morphologies, thermal properties and Young's moduli of MCs were investigated. The results indicated that epoxy resins were encapsulated by BN/SBA‐15/epoxy polymer hybrid layer, the resulting MCs were spherical in shape and the introduction of inorganic particles made MCs had rough surface morphology. The mean modulus value of MCs was from 2.8 to 3.1 GPa. The initial decomposition temperature (T_di) of MCs at 5 wt% weight loss was from 309 to 312°C. MCs showed excellent thermal stability below 260°C. The structures and properties of MCs could be tailored by controlling the weight ratio of inorganic particle. When the weight ratio of BN to SBA‐15 was 0.15:0.10, MCs had the highest T_di and modulus. The resulting MCs were applied to high performance 4,4′‐bismaleimidodiphenylmethane/O,O′‐diallylbisphenol A (BMI/DBA) system to design high performance BMI/DBA/MC systems. Appropriate content of MCs could improve the fracture toughness and maintain the glass transition temperature (T_g) of BMI/DBA system. The core materials released from fractured MCs could bond the fracture surfaces of the BMI/DBA matrix through the polymerization of epoxy resins. When the healing temperature schedule of 100°C/2h+150°C/1h was applied, 15 wt% MCs recovered 98% of the virgin fracture toughness of BMI/DBA. Copyright © 2016 John Wiley & Sons, Ltd.     

SERS and FDTD simulation of gold nanoparticles grafted on germanium wafer via galvanic displacement

Uniform and dense Au nanoparticles grown on Ge (Au/Ge) were fabricated by a facile galvanic displacement method and employed as surface‐enhanced Raman scattering (SERS) substrates. The substrates exhibited excellent reproducibility in the detection of rhodamine 6G aqueous solution with a relative standard deviation of <20%. The substrate showed a high Raman enhancement factor of 3.44 × 10⁶. This superior SERS sensitivity was numerical confirmed by the three‐dimensional finite‐difference time‐domain method, which demonstrated a stronger electric field intensity (|E/E₀|²) distribution around the Au nanoparticles grown on Ge. This facile and low‐cost prepared Au/Ge substrate with high SERS sensitivity and reproducibility might have potential applications in monitoring in situ reaction in aqueous solution. Copyright © 2014 John Wiley & Sons, Ltd.     

A new ZnII coordination polymer based on 4‐(pyridin‐4‐yl)benzoic and formic acids: in‐situ synthesis,crystal structure and luminescence properties

The title compound, poly[(μ₂‐formato‐κ³O,O′:O)[μ₂‐4‐(pyridin‐4‐yl)benzoato‐κ³N:O,O′]zinc(II)], [Zn(C₁₂H₈NO₂)(HCOO)]_n, has been synthesized in situ and characterized by thermogravimetric analysis (TGA) and single‐crystal and powder X‐ray diffraction analyses. The polymer contains two independent structural units in the asymmetric unit. These are constructed from Zn²⁺ ions, 4‐(pyridin‐4‐yl)benzoate (4‐pbc) bridges and in‐situ‐generated formate ligands, forming two similar two‐dimensional (2D) layer structures. These similar 2D layers are arranged alternately and are linked with each other by dense C—H…O hydrogen bonds to generate a three‐dimensional (3D) supramolecular framework. The crystal is pseudomerohedrally twinned about [201]. Compared with free 4‐Hpbc, the polymer exhibits a red shift and significantly enhanced solid‐state luminescence properties.     

Sequential Voltammetric Determination of Uranium,Cadmium and Lead by Using the ex situ Bismuth Film Electrode: Application to Phosphate Fertilizers

A sequential voltammetric procedure for the determination of uranium, cadmium and lead was investigated at an ex situ bismuth film electrode (BiFE). First, the adsorptive stripping voltammetry was applied to assay the U(VI)‐cupferron complex in the differential pulse mode (detection limit of 1.0 µg L^?1, 200 s accumulation time). Through the manipulation of the same aliquot of the sample, efforts were made to quantify cadmium and lead by square wave anodic stripping voltammetry. Detection limits of 2.03 µg L^?1 for Cd (II) and 2.43 µg L^?1 for Pb (II) were calculated (100 s accumulation time). The methodology was successfully applied to phosphate fertilizer samples after open vessel wet decomposition (HNO₃/H₂O₂). The following value ranges were evaluated: U (VI) 37.2–150 mg kg^?1, Pb (II) 78.3–204 mg kg^?1 and Cd (II) 44.1–71.6 mg kg^?1. Validation was performed by using the standard reference materials SRM‐695 – phosphate fertilizer – and SRM‐1643e – water.     

Comparison of the properties of waterborne polyurethane/multiwalled carbon nanotube and acid‐treated multiwalled carbon nanotube composites prepared by in situ polymerization

A series of waterborne polyurethane (WBPU)/multiwalled carbon nanotube (CNT) and WBPU/nitric acid treated multiwalled carbon nanotube (A‐CNT) composites were prepared by in situ polymerization in an aqueous medium. The optimum nitric acid treatment time was about 0.5 h. The effects of the CNT and A‐CNT contents on the dynamic mechanical thermal properties, mechanical properties, hardness, electrical conductivity, and antistatic properties of the two kinds of composites were compared. The tensile strength and modulus, the glass‐transition temperatures of the soft and hard segments (T_gs and T_gh, respectively), and ΔT_g (T_gh − T_gs) of WBPU for both composites increased with increasing CNT and A‐CNT contents. However, these properties of the WBPU/A‐CNT composites were higher than those of the WBPU/CNT composites with the same CNT content. The electrical conductivities of the WBPU/CNT1.5 and WBPU/A‐CNT1.5 composites containing 1.5 wt % CNTs (8.0 × 10⁻⁴ and 1.1 × 10⁻³ S/cm) were nearly 8 and 9 orders of magnitude higher than that of WBPU (2.5 × 10⁻¹² S/cm), respectively. The half‐life of the electrostatic charge (τ_1/2) values of the WBPU/CNT0.1 and WBPU/A‐CNT0.1 composites containing 0.1 wt % CNTs were below 10 s, and the composites had good antistatic properties. From these results, A‐CNT was found to be a better reinforcer than CNT. These results suggest that WBPU/A‐CNT composites prepared by in situ polymerization have high potential as new materials for waterborne coatings with good physical, antistatic, and conductive properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3973–3985, 2005     

catena‐Poly[[[μ‐1,3‐bis(diphenylphosphanyl)propane‐κ2P:P′][O‐ethyl (4‐methoxyphenyl)phosphonodithioato‐κ2S,S′]silver(I)] chloroform monosolvate]

Reaction of a mixture of AgOAc, Lawesson's reagent [2,4‐bis(4‐methoxyphenyl)‐1,3‐dithiadiphosphetane‐2,4‐disulfide] and 1,3‐bis(diphenylphosphanyl)propane (dppp) under ultrasonic treatment gave the title compound, {[Ag(C₉H₁₂O₂PS₂)(C₂₇H₂₆P₂)]·CHCl₃}_n, a novel one‐dimensional chain based on the in situ‐generated bipodal ligand [ArP(OEt)S₂]⁻ (Ar = 4‐methoxyphenyl). The compound consists of bidentate bridging 1,3‐bis(diphenylphosphanyl)propane (dppp) and in situ‐generated bidentate chelating [ArP(OEt)S₂]⁻ ligands. The dppp ligand links the [Ag{ArP(OEt)S₂}] subunit to form an achiral one‐dimensional infinite chain. These achiral chains are packed into chiral crystals by virtue of van der Waals interactions. No π–π interactions are observed in the crystal structure.