Nonisothermal crystallization behavior of polypropylene-clay nanocomposites

The influence of two concentrations of clay nanoparticles on the nonisothermal crystallization behavior of the intercalated polypropylene-clay nanocomposites is investigated here. It is observed that the crystallization peak temperature (T_p) of PP-clay nanocomposites is marginally higher than neat PP at various cooling rates. Furthermore, the half-time for crystallization (t_0.5) decreased with increase in clay content, implying the nucleating role of clay nanoparticles. The nonisothermal crystallization data is analyzed using Avrami, Ozawa and Mo and coworkers methods. The validity of kinetic models on the nonisothermal crystallization process of PP-clay nanocomposites is discussed. The approach developed by Mo and coworkers successfully describes the nonisothermal crystallization behavior of PP and PP-clay nanocomposites. The activation energy for nonisothermal crystallization of pure PP and PP-clay nanocomposites based on Kissinger method is evaluated.     

Properties of biodegradable poly(butylene succinate) (PBS) composites with carbon black

Biodegradable poly(butylene succinate)/carbon black (PBS/CB) nanocomposite was prepared by melt compounding and the amount of CB loading was 3 wt %. The PBS/CB nanocomposite exhibited not only a good dispersion of aggregates of CB in the PBS matrix, but also an improvement in mechanical and electrical properties as well. The nonisothermal crystallization behavior and crystal structure of neat PBS and its nanocomposite were also studied by differential scanning calorimetry and wide angle X-ray diffraction in detail. The crystal morphology is observed by polarized optical microscopy. The Avrami equation and the Mo equation were employed to describe the nonisothermal crystallization kinetics. The Mo equation was found to be more suitable to predict the whole nonisothermal crystallization process for both neat PBS and its nanocomposite. It was concluded that the addition of CB retarded the crystallization rate compared with that of neat PBS at the same cooling rate, which can be attributed to restricting effect of CB on the segmental motions of the polymer chains. Moreover, the incorporation of the CB particles does not modify the crystal structure of PBS.     

Nonisothermal crystallization behavior of syndiotactic polystyrene/montmorillonite nanocomposites

X‐ray diffraction methods and differential scanning calorimetry were used to investigate the crystalline structure and crystallization kinetics of syndiotactic polystyrene (sPS)/clay nanocomposites. X‐ray diffraction data showed the presence of polymorphism in sPS/montmorillonite (MMT) nanocomposites, which was strongly dependent on the processing conditions (premelting temperature and cooling rate) of the sPS/MMT nanocomposites and on the content of MMT in the sPS/MMT nanocomposites. The α‐crystalline form could be transformed into β‐crystalline forms at higher premelting temperatures. The nonisothermal melt‐crystallization kinetics and melting behavior of the sPS/MMT nanocomposites were also studied at various cooling rates. The correlation of the crystallization kinetics, melting behavior, and crystalline structure of the sPS/MMT nanocomposites was examined. The results indicated that the addition of a small amount of MMT to sPS caused a change in the mechanism of nucleation and the crystal growth of the sPS crystallite. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 560–570, 2003     

Influence of ionic association on the nonisothermal crystallization kinetics of sodium sulfonate poly(butylene succinate) ionomers

We evaluated the relationship between the ionic substituents and nonisothermal crystallization behavior in poly(butylene succinate) (PBS) ionomers, synthesized by the introduction of sulfonated dimethyl fumarate (SDMF) with sodium sulfonate. In addition, we investigated the effect of sodium ions on the molecular structure of the PBS backbone by solid‐state ²³Na NMR analysis. Sodium ion aggregates (multiplets) was predominately created with the ionic group concentration, and melt rheology and dynamic melt analysis results showed that multiplet formation induced not only remarkable heterogeneity, but also a high degree of clustering in the PBS chains. At low ionic group concentration, well dispersed multiplets behaved as effective nuclei during the crystallization of the PBS ionomer and accelerated the rate of crystallization. As ionic group concentration grew higher, crystallization rates decreased due to hindered chain mobility by clusters consisting of numerous multiplets. A combined Ozawa and Avrami equation proved to be more effective than the Ozawa equation in describing the nonisothermal crystallization kinetics of PBS and its ionomers. The observed nucleation activity indicates that the nonisothermal crystallization rate is not directly proportional to the ionic group concentration. Superior nucleation activity was observed in PBS ionomer containing 1 mol % SDMF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 925–937, 2008     

Nonisothermal crystallization behavior and crystalline structure of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

X‐ray diffraction method and differential scanning calorimetry analysis have been used to investigate the nonisothermal crystallization of poly(3‐hydroxybutyrate) (PHB)/poly(ethylene glycol) phosphonates (PEOPAs)‐modified layered double hydroxide (PMLDH) nanocomposites. Effects of cooling rates and PMLDH contents on the nonisothermal crystallization behavior of PHB were explored. These results show that the addition of 2 wt % PMLDH into PHB caused heterogeneous nucleation increasing the crystallization rate and reducing the activation energy. By adding PMLDH into the PHB probably hinder the transport ability of the molecule chains and result in a decreasing crystallity of PHB, thus increasing the activation energy. The correlation among melting behavior, apparent crystallite size, and paracrystalline distortion of PHB/PMLDH nanocomposites has been also discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 995–1002, 2007     

Nonisothermal melt crystallization and subsequent melting behavior of biodegradable poly(hydroxybutyrate)/multiwalled carbon nanotubes nanocomposites

In this work, nonisothermal melt crystallization and subsequent melting behavior of poly(hydroxybutyrate) (PHB) and its nanocomposites at different multiwalled carbon nanotubes (MWCNTs) loadings were investigated. Increasing the MWCNTs loadings has enhanced the nonisothermal melt crystallization of PHB significantly in the nanocomposites when compared with that of the neat PHB; furthermore, increasing the cooling rates shift the crystallization exotherms to low temperature range for both neat PHB and its nanocomposites. Double melting behavior is found for both neat PHB and its nanocomposites crystallized nonisothermally from the melt, which is explained by the melting, recrystallization, and remelting model. Effects of the MWCNTs loadings, cooling rates, and heating rates on the subsequent melting behavior of PHB were studied in detail. It is found that increasing the MWCNTs loadings, decreasing the cooling rates, and increasing the heating rates would restrict the occurrence of the recrystallization of PHB in the nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2238–2246, 2009     

Crystallization kinetics and morphology of poly(butylene succinate‐co‐adipate)

The crystallization kinetics of biodegradable poly(butylene succinate‐co‐adipate) (PBS/A) copolyester was investigated by using differential scanning calorimetry (DSC) and polarized optical microscopy (POM), respectively. The Avrami and Ozawa equations were used to analyze the isothermal and nonisothermal crystallization kinetics, respectively. By using wide‐angle X‐ray diffraction (WAXD), PBS/A was identified to have the same crystal structure with that of PBS. The spherulitic growth rates of PBS/A measured in isothermal conditions are very well comparable with those measured by nonisothermal procedures (cooling rates ranged from 0.5 to 15 °C/min). The kinetic data were examined with the Hoffman–Lauritzen nucleation theory. The observed spherulites of PBS/A with different shapes and textures strongly depend on the crystallization temperatures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3231–3241, 2005     

Effect of silver nanoparticles on the morphology,crystallization, and melting behavior of polypropylene: A study on non-isothermal crystallization kinetics

The nanocomposites were prepared using melt intercalation method and the effects of the processing conditions on silver nanoparticles dispersion were investigated by transmission electron microscopy. Non-isothermal crystallization kinetics of virgin polypropylene (PP) and its nanocomposites have been evaluated using differential scanning calorimetric technique. The non-isothermal crystallization melt data were analyzed using macro kinetics equation with the help of Avrami, Malkin, and Mo’s models. The crystallization rate increased with the increasing of cooling rates for virgin PP and nanocomposite, but the crystallization of nanocomposite was faster than that of PP at a given cooling rate. The activation energy for non-isothermal crystallization of virgin polymer and nanocomposites based on Kissinger method has been determined to be 186 and 211 kJ/mol, respectively. Transmission electron microscopy analysis reveals balanced dispersion and presence of some silver nanoparticles aggregates, which act as a heterogeneous nucleating agent during the crystallization of the nanocomposite.     

Poly(L‐lactide)/layered double hydroxides nanocomposites: Preparation and crystallization behavior

Novel nanocomposites from poly(L ‐lactide) (PLLA) and an organically modified layered double hydroxide (LDH) were prepared using the melt‐mixing technique. The structure and crystallization behavior of these nanocomposites were investigated by means of wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and polarized optical microscopy (POM). WAXD results indicate that the layer distance of dodecyl sulfate‐modified LDH (LDH‐DS) is increased in the PLLA/LDH composites, compared with the organically modified LDH. TEM analysis suggests that the most LDH‐DS layers disperse homogenously in the PLLA matrix in the nanometer scale with the intercalated or exfoliated structures. It was found that the incorporation of LDH‐DS has little or no discernable effect on the crystalline structure as well as the melting behavior of PLLA. However, the crystallization rate of PLLA increases with the addition of LDH‐DS. With the incorporation of 2.5 wt % LDH‐DS, the PLLA crystallization can be finished during the cooling process at 5 °C/min. With the addition of 5 wt % LDH‐DS, the half‐times of isothermal melt‐crystallization of PLLA at 100 and 120 °C reduce to 44.4% and 57.0% of those of the neat PLLA, respectively. POM observation shows that the nucleation density increases and the spherulite size of PLLA reduces distinctly with the presence of LDH‐DS. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2222–2233, 2008     

Thermal stability, crystallization, structure and morphology of syndiotactic 1,2-polybutadiene/organoclay nanocomposite

Syndiotactic 1,2-polybutadiene/organoclay nanocomposites were prepared and characterized by thermogravimetry analysis (TGA), X-ray diffraction (XRD), polarized optical microscopy (POM), and differential scanning calorimetry (DSC), respectively. The XRD shows that exfoliated nanocomposites are formed dominantly at lower clay concentrations (less than 2%), at higher clay contents intercalated nanocomposites dominate. At the same time, the XRD indicates that the crystal structures of sPB formed in the sPB/organoclay nanocomposites do not vary, only the relative intensity of the peaks corresponding to (0 1 0) and (2 0 0)/(1 1 0) crystal planes, respectively, varies. The DSC and POM indicate that organoclay layers can improve cooling crystallization temperature, crystallization rate and reducing the spherulite sizes of sPB. TGA shows that under argon flow the nanocomposites exhibit slight decrease of thermal stability, while under oxygen flow the resistance of oxidation and thermal stability of sPB/organoclay nanocomposites were significantly improved relative to pristine sPB. The primary and secondary crystallization for pristine sPB and sPB/organoclay (2%) nanocomposites were analyzed and compared based on different approaches. The nanocomposites exhibit smaller Avrami exponent and larger crystallization rate constant, with respect to pristine sPB. Primary crystallization under isothermal conditions displays both athermal nucleation and three-dimensional spherulite growth and under nonisothermal processes the mechanism of primary crystallization becomes very complex. Secondary crystallization shows a lower-dimensional crystal growth geometry for both isothermal and nonisothermal conditions. The activation energy of crystallization of sPB and sPB/organoclay nanocomposites under isothermal and nonisothermal conditions were also calculated based on different approaches.     

The crystallization behavior of biodegradable poly(butylene succinate) in the presence of organically modified clay with a wide range of loadings

The crystallization behavior of poly(butylene succinate)(PBS) nanocomposites with a wide range of contents of clays was revealed. It was of interest to find that the crystallization rate of PBS was accelerated obviously at relatively low contents of clays; while a retarded crystallization kinetics and a decreased crystallinity of PBS were found in the nanocomposites with higher clay contents. Two interplaying effects existed in the nanocomposites, i.e., a suppression effect of clays on nucleation and a templating effect of clays on crystal growth, were clarified to contribute to this intriguing crystallization behavior.     

Nonisothermal crystallization kinetics of polypropylene/montmorillonite nanocomposites

The nonisothermal crystallization kinetics of poly(propylene) (PP) and poly(propylene)/organic‐montmorillonite (PP/Mont) nanocomposite were investigated by differential scanning calorimetry (DSC) with various cooling rates. The Avrami analysis modified by previous research was used to describe the nonisothermal crystallization process of PP and PP/Mont nanocomposite very well. The values of half‐time and Z_c showed that the crystallization rate increased with increasing cooling rates for both PP and PP/Mont nanocomposite, but the crystallization rate of PP/Mont nanocomposite was faster than that of PP at a given cooling rate. The activation energies were estimated by the Kissinger method, and the values were 189.4 and 155.7 kJ/mol for PP and PP/Mont nanocomposite, respectively. PP/Mont nanocomposite could be easily fabricated as original PP, although the addition of organomontmorillonite might accelerate the overall nonisothermal crystallization process. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 408–414, 2002; DOI 10.1002/polb.10101     

Quiescent crystallization of polypropylene: Experiments and modeling

The quiescent crystallization of several polypropylenes (PPs) was examined using Differential Scanning Calorimetry (DSC) and Polarized Optical Microscopy (POM). The half‐times of crystallization were obtained from the DSC thermographs employing the Avrami/Nakamura equation to fit and predict crystallization kinetics under isothermal and nonisothermal conditions. The induction times under nonisothermal conditions were estimated from isothermal crystallization data and used in conjunction with the Nakamura model in order to capture the crystallization behavior of the studied PPs. The Avrami/Nakamura model is found to fit and predict the nonisothermal crystallization data of the various PPs well over a range of cooling rates supporting its use in the simulation of polymer processes of industrial relevance. POM was used in line with parallel plate rheometry (Anton Paar, MCR 502) under no flow conditions to study the shape and growth rate of crystals of various PP resins at different temperatures or cooling rates. The growth rate of crystals is impeded exponentially with increase of temperature. The various PP resins of different molecular architecture have shown different nucleation and growth rate characteristics behavior under similar processing conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1259–1275     

Effect of carbon nanotubes content on crystallization kinetics and morphology of polypropylene

Thermoplastic nanocomposites were prepared in a laboratory mixer using polypropylene (PP) and different amounts of single-walled carbon nanotubes (SWNT) in the range 0.25–2 wt%. The effect of SWNT content on the thermal and mechanical properties and also morphology of the PP/SWNT nanocomposites were studied. The results obtained from nonisothermal crystallization of PP and the nanocomposites, which were carried out using the differential scanning calorimetry technique, showed that not only the overall rate of crystallization of PP increased when SWNT was added to the polymer but also the rate of nucleation was higher and the crystallite size distribution was more uniform for the nanocomposites than for PP. From the optical microscopy studies, it was found that the PP spherulites decreased in size when SWNT was introduced into the polymer and also the mature spherical shaped crystals of PP changed in part to the immature kidney- or bean-shaped crystal forms in the nanocomposites. In addition, the crystallization kinetics was also studied by using isothermal spherulitic growth rate, and the values of nucleation constant, K_g, and end surface free energy, σ_e, were calculated for PP and the nanocomposites according to Lauritzen–Hoffman theory. The reductions of these two parameters were in agreement with the fact that the rate of crystallization of PP in nanocomposites was higher than that of the pristine polymer.     

Synthesis and characterization of poly(ɛ-caprolactone)/Fe3o4 nanocomposites by in situ polymerization

A series of magnetic nanocomposites based on poly(?-caprolactone) (PCL) and Fe₃O₄ nanoparticles were prepared using a facile in situ polymerization method. The chemical structures of the PCL/Fe₃O₄ nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy. Results of wide-angle X-ray diffraction (WAXD) showed that the incorporation of the Fe₃O₄ nanoparticles did not affect the crystallization structure of the PCL. Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the morphology and dispersion of the Fe₃O₄ nanoparticles within the as-synthesized nanocomposites. Results of differential scanning calorimetry (DSC) and polarizing optical microscopy (POM) showed that the crystallization temperature was raised and the spherulites size decreased by the presence of Fe₃O₄ nanoparticles in the nanocomposites due to the heterogeneous nucleation effect. The thermal stability of the PCL was depressed by incorporation of Fe₃O₄ nanoparticles from thermogravimetric analysis (TGA). The superparamagnetic behavior of the PCL/Fe₃O₄ nanocomposites was testified by the superconducting quantum interference device (SQUID) magnetometer analysis. The obtained biodegradable nanocomposites will have a great potential in magnetic resonance imaging contrast and targeted drug delivery.     

Nonisothermal crystallization behavior of poly(m‐xylene adipamide)/montmorillonite nanocomposites

This article reports the nonisothermal crystallization behavior of MXD6 and its clay nanocomposite system (MXD6/MMT) using differential scanning calorimetry (DSC). The DSC experimental data were analyzed by theoretical modeling of the crystallization kinetics using the Avrami, Ozawa, Jeziorny, and the combined Avrami–Ozawa semiempirical models. It has been determined that these models adequately described the crystallization behavior of the MXD6 nanocomposite at cooling rates below 20 °C/min, but there was a deviation from linear dependence at higher cooling rates. This was attributed to changes of both the free energy and the cooling crystallization function K(T) over the entire crystallization process, as well as possible relaxation effects leading to structural rearrangements. In addition, the activation energy determined using the differential isoconversional method of Friedman was also found to vary, indicating changes in both the free energy and crystallization mechanism. Despite the lack of a reliable theoretical model, the heterogeneous nucleating activity of the MMT nanoparticles was demonstrated and quantified using Dobreva's method (? = 0.71), and the crystallization rate for the nanocomposite system was found to be greater than pure MXD6 by up to 79% at 40 °C/min. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1300–1312, 2009     

Nonisothermal crystallization and melting behavior of poly(β‐hydroxybutyrate)–Poly(vinyl‐acetate) blends

Nonisothermal crystallization and melting behavior of poly(β‐hydroxybutyrate) (PHB)–poly(vinyl acetate) (PVAc) blends from the melt were investigated by differential scanning calorimetry using various cooling rates. The results show that crystallization of PHB from the melt in the PHB–PVAc blends depends greatly upon cooling rates and blend compositions. For a given composition, the crystallization process begins at higher temperatures when slower scanning rates are used. At a given cooling rate, the presence of PVAc reduces the overall PHB crystallization rate. The Avrami analysis modified by Jeziorny and a new method were used to describe the nonisothermal crystallization process of PHB–PVAc blends very well. The double‐melting phenomenon is found to be caused by crystallization during heating in DSC. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 443–450, 1999     

Nonisothermal crystallization and melting behavior of poly(3-hydroxybutyrate) and maleated poly(3-hydroxybutyrate)

Nonisothermal crystallization and melting behavior of poly(3-hydroxybutyrate) (PHB) and maleated PHB were investigated by differential scanning calorimetry using various cooling rates. The results show that the crystallization behavior of maleated PHB from the melt greatly depends on cooling rates and its degree of grafting. With the increase in cooling rate, the crystallization process for PHB and maleated PHB begins at lower temperature. For maleated PHB, the introduction of maleic anhydride group hinders its crystallization, causing crystallization and nucleation rates to decrease, and crystallite size distribution becomes wider. The Avrami analysis, modified by Jeziorny, was used to describe the nonisothermal crystallization of PHB and maleated PHB. Double melting peaks for maleated PHB were observed, which was caused by recrystallization during the heating process.     

Nonisothermal crystallization kinetics and spherulite morphology of poly(trimethylene terephthalate)

The nonisothermal melt crystallization behavior of poly(trimethylene terephthalate) (PTT) was investigated using the DSC technique. PTT peak exothermic crystallization temperature was found to move to lower temperatures as the cooling rate was increased. The modified Avrami equation exponent, n, was 4 when the cooling rates were between 5 and 15 °C/min, indicating a thermal nucleation and a three-dimensional spherical growth mechanism. When the cooling rate was increased to 25 °C/min, n gradually decreased to near 3, implying the nucleation mechanism changed to an athermal mode. PTT nonisothermal crystallization behavior could also be analyzed using the Ozawa equation and the combined equations of Ozawa and Avrami with very good fit of the data.PTT spherulite morphologies and the sign of the birefringence depended strongly on the spherulite's growth temperature. When the growth temperature was decreased from 222 to 170 °C, the spherulite changed from a saturation-type dendritic morphology to one with a colorful banded texture; the sign of the birefringence also changed in the following order: from a weakly positive spherulite → mixed spherulite → weakly negative spherulite → negative spherulite → positive spherulite → negative spherulite → positive spherulite.     

Nonisothermal crystallization kinetics and melting behavior of bimodal medium density polyethylene/low density polyethylene blends

Nonisothermal crystallization kinetics and melting behavior of bimodal-medium-density- polyethylene (BMDPE) and the blends of BMDPE/LDPE were studied using differential scanning calorimetry (DSC) at various scanning rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the nonisothermal crystallization process of BMDPE. The BMDPE DSC data were analyzed by the theory of Ozawa. Kinetic parameters such as the Avrami exponent (n), the kinetic crystallization rate constant (Z_c), the peak temperatures (T_p) and the half-time of crystallization (t_1/2) etc. were determined at various scanning rates. The appearance of double melting peaks and the double crystallization peaks in the heating and cooling DSC curves of BMDPE/LDPE blends indicated that the BMDPE and LDPE could crystallize respectively.