Efficient Proteolysis of Glycoprotein Using a Hydrophilic Immobilized Enzyme Reactor Coupled with MALDI-QIT-TOF-MS Detection and μHPLC Analysis

A hydrophilic immobilized enzyme reactor (IMER) containing trypsin was prepared and applied in the proteolysis of glycoproteins. Glycoproteins including horseradish peroxidase, asialofetuin, and fetuin were used to evaluate the performance of the hydrophilic IMER for the glycoprotein digestion. The digested products were detected by matrix-assisted laser desorption/ionization quadruple ion trap time-of-flight mass spectrometry and micro-high-performance liquid chromatography. The hydrophilic IMER showed higher enzymatic digestion efficiency compared with conventional in-solution digestion. The digestion time could be reduced from 16 h to several minutes. Furthermore, using microwaves as a heat source, the reproducibility of the hydrophilic IMER was evaluated and this IMER could be recycled for at least ten times without obvious loss of enzyme activity. The hydrophilic IMER provides a promising tool for high-throughput glycoproteome analysis.     

Evaluation of xanthine oxidase inhibitory activity of flavonoids by an online capillary electrophoresis-based immobilized enzyme microreactor

Xanthine oxidase (XOD) is a key enzyme in the human body to produce uric acid, and its inhibitor can be used for the treatment of hyperuricemia and gout. In this study, an online CE-based XOD immobilized enzyme microreactor (IMER) was developed for the enzyme kinetics assays and inhibitor screening. After 30 consecutive runs, the XOD activity remained about 95.6% of the initial immobilized activity. The Michaelis–Menten constant (K_m) of the immobilized XOD was determined as 0.39 mM using xanthine as substrate. The half-maximal inhibitory concentration and inhibition constant of the known inhibitor 4-aminopyrazolo[3,4-d]pyrimidine on XOD were determined as 11.9 and 5.2 μM, respectively. Then, the developed method was applied to evaluate the XOD inhibitory activity of 10 flavonoids, which indicated that dihydroquercetin, quercetin, biochanin A, and epicatechin had significant inhibitory effect on XOD. In addition, molecular docking results verified that the binding energy of the flavonoids with enzyme were in line with their inhibitory activity determined by XOD–IMER. Therefore, the developed XOD–IMER is a potential tool for the primary screening of XOD inhibitors from natural products.     

基于DNA定向固定化技术构建毛细管固定化酶微反应器的研究进展

生物酶影响着物质代谢和质能转换等生命活动,生物体内某些酶的活性变化会导致疾病的发生。发展新型的酶分析方法对深刻理解生物代谢过程、疾病诊断和药物研发等具有重要意义。毛细管电泳（CE）具有分离效率高、分析速度快、操作简单和样品消耗少以及可与多种检测手段联用等优点,在酶分析研究中越来越受到关注。CE酶分析主要包括离线和在线两种模式,其中,固定化酶微反应器与毛细管电泳联用（CE-IMER）的在线酶分析已经成为主要的酶分析方法之一。CE-IMER充分结合了固定化酶和CE的优势,将游离酶固定在毛细管内,不仅可以显著提高酶的稳定性和重复使用性,而且可以实现纳升规模溶液的自动化酶分析,进而显著降低酶分析成本。目前已有大量方法制备IMER用于CE酶分析,然而如何构建性能良好、可再生使用、酶固载量大、自动化程度高的CE-IMER一直是该领域重点研究的问题。DNA定向固定化技术（DDI）可以充分利用DNA分子的碱基互补配对（A-T,C-G）,在温和的生理条件下特异性固定生物大分子。由于短链双螺旋DNA分子具有较强的机械刚性和物理化学稳定性,通过DDI将酶固定在载体表面,有利于降低传质阻力,提高酶与底物的接触能力,进而促进酶促分析过程。该文主要综述了利用DDI构建新型IMER在CE酶分析中的应用现状,并对其未来发展进行了展望。     

Preparing a metal-ion chelated immobilized enzyme reactor based on the polyacrylamide monolith grafted with polyethylenimine for a facile regeneration and high throughput tryptic digestion in proteomics

Initially, a poly (glycidyl methacrylate-co-acrylamide-co-methylenebisacrylamide) monolith was prepared in the 100 μm i.d. capillary, and then was grafted with polyethylenimine (Mw, ∼25,000) for adsorbing Cu²⁺, followed by chelating trypsin. As a result, efficient digestion for BSA (100 ng/μL) was completed within 50 s via such immobilized enzyme reactor (IMER); yielding 47% sequence coverage by matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) analysis. Compared with the conventional method for preparing the metal-ion chelated IMER, the regeneration of such IMER can be achieved facilely by the respective 30 min desorption and re-adsorption of trypsin, and 51% sequence coverage was obtained for 50 s BSA digestion after regeneration. BSA down to femtomole was also efficiently digested by the prepared regenerable IMER. Meanwhile, after the consecutive digestion of myoglobin and BSA, there was not any mutual interference for both during MALDI-TOF MS identification, indicating the low nonspecific adsorption of such regenerable IMER. To test the applicability of regenerable IMER for complex sample profiling, proteins (150 ng) extracted from Escherichia coli were digested within 80 s by the regenerable IMER and further analyzed by nanoreversed phase liquid chromatography–electrospray ionization–mass spectrometry successfully, showing its practicability for the high throughput analysis of complex samples.     

Immobilized Enzyme Reactor in On-line LC and Its Application in Drug Screening

This study is to give a brief introduction of immobilized enzyme reactor (IMER) in on-line LC and its application in drug screening. The literature of immobilization techniques, immobilization supports and determination of immobilized enzyme activity were reviewed; the application in the drug screening is briefly introduced. It was found that IMER increased the enzymatic stabilization, strikingly shortens reaction time and can be used to perform fast screening of enzyme inhibitor. IMER has wide fields in drug screening application.     

Multienzyme-modified biosensing surface for the electrochemical analysis of aspartate transaminase and alanine transaminase in human plasma

We investigated the electrochemical detection of aspartate transaminase (AST) and alanine transaminase (ALT) by using a multienzyme-modified electrode surface. Determination of the activities of transaminases in human serum is clinically significant because their concentrations and ratios indicate the presence of hepatic diseases or myocardial dysfunction. For electrochemical detection of AST and ALT, enzymes that participate in the reaction mechanism of AST and ALT, such as pyruvate oxidase (POX) and oxaloacetate decarboxylase, were immobilized on an electrode surface by using an amine-reactive self-assembled monolayer and a homobifunctional cross-linker. In the presence of suitable substrates such as l-aspartate (l-alanine) and α-ketoglutarate, AST and ALT generate pyruvate as an enzymatic end product. To determine the activities of AST and ALT, electroanalyses of pyruvate were conducted using a POX and ferrocenemethanol electron shuttle. Anodically generated oxidative currents from multienzyme-mediated reactions were correlated to AST and ALT levels in human plasma. On the basis of the electrochemical analysis, we obtained calibration results for AST and ALT concentrations from 7.5 to 720 units/L in human plasma-based samples, covering the required clinical detection range.     

Evaluation of various immobilized enzymatic microreactors coupled on-line with liquid chromatography and mass spectrometry detection for quantitative analysis of cytochrome c

An in-line procedure for protein analysis using a trypsin-based immobilized enzymatic reactor (IMER) coupled to LC-MS/MS has been developed. Various IMERs were synthesized and characterized by estimating the digestion yield of a pattern peptide in UV detection. Laboratory-made IMERs were optimized by studying the effect of different parameters as the nature of the functionalized immobilization support (silica, agarose), the amount of immobilized trypsin and the binding density. The potential of the laboratory-made IMERs were compared with a batch digestion and with a commercial trypsin-based IMER. The laboratory-made IMER based on CNBr-activated Sepharose showed the best performances in terms of digestion yields, digestion time, price and repeatability (RSD<4%). Cytochrome c was then digested on this IMER and used in-line with LC-MS. The target protein was easily recognized by the Mascot database until 17pmol injected.     

Capillary electrophoresis-integrated immobilized enzyme microreactor with graphene oxide as support: Immobilization of negatively charged L-lactate dehydrogenase via hydrophobic interactions

We report the first application of hydrophobic interaction between graphene oxide (GO) and negatively charged enzymes to fabricate CE-integrated immobilized enzyme microreactors (IMERs) by a simple and reliable immobilization procedure based on layer by layer assembly. L -lactate dehydrogenase (L -LDH), which is negatively charged during the enzymatic reaction, is selected as the model enzyme. Various spectroscopic techniques, including SEM, FTIR, and UV-vis are used to characterize the fabricated CE-IMERs, demonstrating the successful immobilization of enzymes on the negatively charged GO layer in the capillary surface. The IMER exhibits excellent repeatability with RSDs of inter-day and batch-to-batch less than 3.49 and 6.37%, respectively, and the activity of immobilized enzymes remains about 90% after five-day usage. The measured K_m values of pyruvate and NADH of the immobilized L -LDH are in good agreement with those obtained by free enzymes. The results demonstrate that the hydrophobic interactions and/or π-π stacking is significant between the GO backbone and the aromatic residues of L -LDH and favorable to fabrication of CE-integrated IMERs. Finally, the method is successfully applied to the determination of pyruvate in beer samples.     

Integration of capillary isoelectric focusing with monolithic immobilized pH gradient,immobilized trypsin microreactor and capillary zone electrophoresis for on‐line protein analysis

An integrated platform consisting of protein separation by CIEF with monolithic immobilized pH gradient (M‐IPG), on‐line digestion by trypsin‐based immobilized enzyme microreactor (trypsin‐IMER), and peptide separation by CZE was established. In such a platform, a tee unit was used not only to connect M‐IPG CIEF column and trypsin‐IMER, but also to supply adjustment buffer to improve the compatibility of protein separation and digestion. Another interface was made by a Teflon tube with a nick to couple IMER and CZE via a short capillary, which was immerged in a centrifuge tube filled with 20 mmol/L glutamic acid, to exchange protein digests buffer and keep electric contact for peptide separation. By such a platform, under the optimal conditions, a mixture of ribonuclease A, myoglobin and BSA was separated into 12 fractions by M‐IPG CIEF, followed by on‐line digestion by trypsin‐IMER and peptide separation by CZE. Many peaks of tryptic peptides, corresponding to different proteins, were observed with high UV signals, indicating the excellent performance of such an integrated system. We hope that the CE‐based on‐line platform developed herein would provide another powerful alternative for an integrated analysis of proteins.     

Screening of tyrosinase inhibitors by capillary electrophoresis with immobilized enzyme microreactor and molecular docking

A new method for screening tyrosinase inhibitors from traditional Chinese medicines (TCMs) was successfully developed by capillary electrophoresis with reliable online immobilized enzyme microreactor (IMER). In addition, molecular docking study has been used for supporting inhibition interaction between enzyme and inhibitors. The IMER of tyrosinase was constructed at the outlet of the capillary by using glutaraldehyde as cross‐linker. The parameters including enzyme reaction, separation of the substrate and product, and the performance of immobilized tyrosinase were investigated systematically. Because of using short‐end injection procedure, the product and substrate were effectively separated within 2 min. The immobilized tyrosinase could remain 80% active for 30 days at 4°C. The Michaelis–Menten constant of tyrosinase was determined as 1.78 mM. Kojic acid, a known tyrosinase inhibitor, was used as a model compound for the validation of the inhibitors screening method. The half‐maximal inhibitory concentration of kojic acid was 5.55 μM. The method was successfully applied for screening tyrosinase inhibitors from 15 compounds of TCM. Four compounds including quercetin, kaempferol, bavachinin, and bakuchiol were found having inhibitory potentials. The results obtained in this work were supported by molecular docking study.     

Lab‐on‐a‐Chip Biosensor for Glucose Based on a Packed Immobilized Enzyme Reactor

In this work, the development of a packed immobilized enzyme reactor (IMER) and its integration to a capillary electrophoresis microchip is described. The present microchip design differs from others, in the fact that the same design could be used with or without the particles and, just by changing the material used to pack the IMER, different analytes can be detected. The applied procedure involves the separation of the target analyte by capillary electrophoresis (CE), which is then coupled to a post‐column IMER that produces H₂O₂. The H₂O₂ produced is finally detected downstream at the surface of a working electrode. Glucose was detected above 100 μM by packing particles modified with glucose oxidase at the end of the separation channel. The analytical performance of the microchip‐CE has been demonstrated by performing the separation and detection of glucose and noradrenaline. Additions of fructose showed no effect on either the peak position or the peak magnitude of glucose. The microchip‐CE‐IMER was also used to quantify glucose in carbonated beverages with good agreement with other reports.     

Electrochemical Measurements of Glucose Using a Micro Flow‐Through Immobilized Enzyme Reactor

A new fast, cheap and efficient epoxy‐amine immobilized enzyme reactor (IMER) is demonstrated. Polyethyleneimine (PEI) was used as the curing agent of an epoxy resin (bisphenol‐A diglycidyl ether (BADGE)) in order to introduce a high number of reactive –NH₂ groups at the substrate. A ratio mixture of 3:2 PEI:BADGE (w/w) was shown to be the most suitable for curing, taking into account the number of immobilization sites and the resistance of the material towards channeling. Electrochemical measurements made by a three electrode system, adapted at the IMER, showed that the K_m value for immobilized glucose oxidase (GOx) was half the value commonly reported for GOx immobilized at PEI derived substrates. The IMER response decreased by around 41 % after one week of intense usage. Even so, the remaining activity was sufficient for quantifications of approximately 0.1 mmol L⁻¹, merely requiring a new calibration of the reactor before its utilization. The developed system was applied to D‐glucose quantification of beverage samples, requiring an injection volume of only 10 μL and a flow rate of 150 μL min⁻¹ (almost 60 samples per hour). Low detection and quantification limits (1.94 and 5.89 μmol L⁻¹, respectively) and a wide linear range (from 8 μmol L⁻¹ to 2 mmol L⁻¹) were also found, which are useful characteristics for quality control analysis.     

Rapid and efficient proteolysis through laser-assisted immobilized enzyme reactors

In this report, laser radiation (808nm) for the first time was employed to enhance the efficiency of proteolysis through immobilized enzyme reactor (IMER). IMER based monolithic support was prepared in the fused-silica capillary via a simple two-step procedure including acryloylation on trypsin surface and in situ aqueous polymerization/immobilization. The feasibility and high efficiency of the laser-assisted IMER were demonstrated by the digestion of bovine serum albumin (BSA), cytochrome c (Cyt-c) and β-casein. The digestion process was achieved in 60s. The peptides were identified by MALDI-TOF-MS, yielding the sequence coverage of 33% for BSA, 73% for Cyt-c and 22% for β-casein. The comparisons between the in-solution digestion and on IMER reaction with/without laser assistance were made. To further confirm its efficiency in proteome analysis, the laser-assisted IMER was also applied to the analysis of one fraction of human serum sample through two-dimensional (2-D) separation of strong anion exchange/reversed-phase liquid chromatography (SAX/RPLC). After a database search, 49 unique peptides corresponding to 5 proteins were identified. The results showed that the laser-assisted IMER provides a promising platform for the high-throughput protein identification.     

Electrochemical performances of C/Fe nanocomposite and its use for mediator-free glucose biosensor preparation

C/Fe nanocomposite (CFN) was synthesized by a procedure similar to an exfoliation/adsorption process to intercalate Fe³⁺ into graphite oxide (GO) layers and would be reduced in a H₂ atmosphere. The results of X-ray diffractometry (XRD) and transimission electron microscopy (TEM) show that the form of CFN is carbon nanotube-Fe nanoparticle composite with α-Fe distributed on the nanotube wall. Paste electrode has been constructed using CFN mixed with paraffin. The electrochemical characteristics of such carbon-Fe nanocomposite paste electrode (CFNPE) has been compared with that of carbon paste electrode (CPE) and evaluated with respect to the electrochemistry of potassium ferricyanide, ascorbic acid and cysteine by cyclic voltammetry. CFNPE can accelerate the electron-transfer to improve the electrochemical reaction reversibility. To fabricate the third-generation glucose biosensor, glucose oxidase (GOD) was immobilized on CFNPE surface with Nafion covered after a pretreatment. Oxygen, ascorbic acid and uric acid have no interference with the glucose detection. The biosensor displays a remarkable sensitivity and stability and the results used in the determination of glucose in the human serum samples are satisfactory.     

Carbon paste electrode modified with copper(II) phosphate immobilized in a polyester resin for voltammetric determination of <Emphasis Type="SmallCaps"> l </Emphasis>-ascorbic acid in pharmaceutical formulations

A carbon paste electrode modified with copper(II) phosphate immobilized in a polyester resin (CuP-Poly) is proposed for voltammetric determination of L-ascorbic acid in pharmaceutical formulations. The modified electrode allows the detection of L-ascorbic acid at lower anodic potentials than observed at unmodified electrodes. Several parameters that can influence the voltammetric response of the proposed electrode such as carbon paste composition, pH, scan rate, and possible interference were investigated. The peak current was proportional to the concentration of ascorbic acid in the range 2.0 x 10(-5) to 3.2 x 10(-3) mol L(-1) with a detection limit of 1.0 x 10(-5) mol L(-1). The stability and repeatability of the electrode for the determination of L-ascorbic acid are also discussed. Amperometric response was also recorded for electrocatalytic oxidation of the L-ascorbic acid. Concentrations of the vitamin C in pharmaceutical formulations (tablets) measured using the modified electrode and a titrimetric method are in agreement at the 95% confidence level and within an acceptable range of error.     

Functionalized magnetic micro- and nanoparticles: optimization and application to micro-chip tryptic digestion

The preparation of an easily replaceable protease microreactor for micro-chip application is described. Magnetic particles coated with poly(N-isopropylacrylamide), polystyrene, poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(glycidyl methacrylate), [(2-amino-ethyl)hydroxymethylen]biphosphonic acid, or alginic acid with immobilized trypsin were utilized for heterogeneous digestion. The properties were optimized, with the constraint of allowing immobilization in a microchannel by a magnetic field gradient. To obtain the highest digestion efficiency, sub-micrometer spheres were organized by an inhomogeneous external magnetic field perpendicularly to the direction of the channel. Kinetic parameters of the enzyme reactor immobilized in micro-chip capillary (micro-chip immobilized magnetic enzyme reactor (IMER)) were determined. The capability of the proteolytic reactor was demonstrated by five model (glyco)proteins ranging in molecular mass from 4.3 to 150 kDa. Digestion efficiency of proteins in various conformations was investigated using SDS-PAGE, HPCE, RP-HPLC, and MS. The compatibility of the micro-chip IMER system with total and limited proteolysis of high-molecular-weight (glyco)proteins was confirmed. It opens the route to automated, high-throughput proteomic micro-chip devices.     

固定化β-葡萄糖醛酸酶反应器的制备及其在4-甲基亚硝胺基-1-(3-吡啶)-1-丁醇的O-糖苷化合物分析中的应用

采用溶胶-凝胶法,以丙烯酰胺作为单体,制备了基于有机-硅胶杂化整体柱的β-葡萄糖醛酸酶反应器。优化了硅酸甲酯和γ-(甲基丙烯酰氧)丙基三甲氧基硅的物质的量的比、丙烯酰胺和聚乙二醇的用量,以及水浴温度等制备条件,获得了孔隙均匀、通透性良好、机械强度高的有机-硅胶杂化整体柱。采用光学显微镜和扫描电镜表征杂化整体柱。进一步将β-葡萄糖醛酸酶共价键合在整体柱上,以4-甲基亚硝胺基-1-(3-吡啶)-1-丁醇(NNAL)的O-糖苷化合物(NNAL-O-Gluc)为底物研究酶反应器的水解效果,实验结果证明酶反应器在室温条件下的水解效率大大提高,实现了NNAL-O-Gluc高效水解与分析,解决了目前NNAL-O-Gluc分析中前处理水解效率低的问题。     

Immobilization of trypsin onto 1,4-diisothiocyanatobenzene-activated porous glass for microreactor-based peptide mapping by capillary electrophoresis: Effect of calcium ions on the immobilization procedure

The immobilization conditions and kinetic behaviour of trypsin, covalently immobilized via the 1,4-diisothiocyanatobenzene (DITC) linker onto aminopropylated controlled pore glass (CPG) particles, have been evaluated to establish a rapid and efficient protocol for fabrication of an immobilized enzyme microreactor (IMER) for protein hydrolysis and subsequent peptide mapping. Addition of calcium ions to either the immobilization reaction solution or hydrolysis assay was studied for a synthetic substrate. Activity was slightly higher when immobilization was carried out in the presence of Ca²⁺ whereas more enzyme could be immobilized in its absence. A protocol requiring less than 3 h was devised to obtain maximal enzymatic activity with the lowest ratio of soluble trypsin to DITC-CPG particles. The resulting immobilized enzyme was found to retain an acceptable percentage (ca. 35%) of its activity after immobilization. The particles were dry-packed into a capillary to make a microscale IMER. Repeatability, reusability and digestion efficiency of the μIMER were investigated for the substrate β-casein using capillary electrophoretic-based peptide mapping. In initial tests, a single device showed reproducible peptide maps for 21 digestions lasting 2 h each, carried out over a period of 2 months. Complete digestion of β-casein could be achieved in a few minutes (86 s residence time in the μIMER followed by a wash step).     

Immobilized Fullerene C60‐Enzyme‐Based Electrochemical Glucose Sensor

A mixed‐valence cluster of cobalt(II) hexacyanoferrate and fullerene C60‐enzyme‐based electrochemical glucose sensor was developed. A water insoluble fullerene C60‐glucose oxidase (C60‐GOD) was prepared and applied as an immobilized enzyme on a glassy carbon electrode with cobalt(II) hexacyanoferrate for analysis of glucose. The glucose in 0.1 M KCl/phosphate buffer solution at pH = 6 was measured with an applied electrode potential at 0.0 mV (vs Ag/AgCl reference electrode). The C60‐GOD‐based electrochemical glucose sensor exhibited efficient electro‐catalytic activity toward the liberated hydrogen peroxide and allowed cathodic detection of glucose. The C60‐GOD electrochemical glucose sensor also showed quite good selectivity to glucose with no interference from easily oxidizable biospecies, e.g. uric acid, ascorbic acid, cysteine, tyrosine, acetaminophen and galactose. The current of H₂O₂ reduced by cobalt(II) hexacyanoferrate was found to be proportional to the concentration of glucose in aqueous solutions. The immobilized C60‐GOD enzyme‐based glucose sensor exhibited a good linear response up to 8 mM glucose with a sensitivity of 5.60 × 10² nA/mM and a quite short response time of 5 sec. The C60‐GOD‐based glucose sensor also showed a good sensitivity with a detection limit of 1.6 × 10^‐6 M and a high reproducibility with a relative standard deviation (RSD) of 4.26%. Effects of pH and temperature on the responses of the immobilized C60‐GOD/cobalt(II) hexacyanoferrate‐based electrochemical glucose sensor were also studied and discussed.     

中性红掺杂SiO2纳米粒子修饰的酶阵列传感器同时测定葡萄糖、乳酸和L-谷氨酸的研究

本文以中性红为核，二氧化硅为壳，利用反相微乳液技术，通过正硅酸四乙酯的水解制备了掺杂有中性红的二氧化硅纳米粒子，并用TEM技术进行了表征。核中性红能够催化测定葡萄糖，乳酸和L-谷氨酸的反应，而壳二氧化硅不仅克服了电活性物质中性红易流失的缺点，且具有高的生物亲和性。分别与葡萄糖氧化酶、乳酸氧化酶以及L-谷氨酸氧化酶混合后，修饰在碳阵列电极表面。最后在该酶阵列电极表面滴加一层Nafion, 防止电活性物质抗坏血酸、尿酸等的干扰。该酶阵列传感器与流动注射分析技术(FIA)相结合，可应用于同时检测大鼠血样中的葡萄糖，乳酸和L-谷氨酸浓度。该方法无需通过传统的色谱柱的分离，大大简化了实验条件，为这一领域的研究提供了有效的分析方法。