共查询到20条相似文献,搜索用时 234 毫秒
1.
《Electroanalysis》2018,30(5):943-954
A simple voltammetric nanosensor was described for the highly sensitive determination of antiviral drug Tenofovir. The benzalkonium chloride and silver nanoparticles were associated to build a nanosensor on glassy carbon electrode. Surface characterictics were achieved using scanning electron microscopic technique. The voltammetric measurements were performed in pH range between 1.0 and 10.0 using cyclic, adsorptive stripping differential pulse and adsorptive stripping square wave voltammetry. The linear dependence of the peak current on the square root of scan rates and the slope value (0.770) demonstrated that the oxidation of tenofovir is a mix diffusion‐adsorption controlled process in pH 5.70 acetate buffer. The linearity range was found to be 6.0×10−8–1.0×10−6 M, and nanosensor displayed an excellent detection limit of 2.39×10−9 M by square wave adsorptive stripping voltammetry. The developed nanosensor was successfully applied for the determination of Tenofovir in pharmaceutical dosage form. Moreover, the voltammetric oxidation pathway of tenofovir was also investigated at bare glassy carbon electrode comparing with some possible model compounds (Adenine and Adefovir). 相似文献
2.
Dogan-Topal B Uslu B Ozkan SA 《Combinatorial chemistry & high throughput screening》2007,10(7):571-582
The electrochemical behavior of atorvastatin calcium at glassy carbon and boron-doped diamond electrodes has been studied using voltammetric techniques. The possible mechanism of oxidation was discussed with model compounds. The dependence of the peak current and potentials on pH, concentration, scan rate and nature of the buffer were investigated for both electrodes. The oxidation of atorvastatin was irreversible and exhibited a diffusion-controlled fashion on the diamond electrode. A linear response was obtained within the range of 9.65 x 10(-7) - 3.86 x 10(-5) M in 0.1 M H(2)SO(4) solution for both electrodes. The detection limits of a standard solution are estimated to be 2.11 x 10(-7) M with differential pulse voltammetry (DPV) and 2.05 x 10(-7)M with square wave voltammetry (SWV) for glassy carbon electrode, and 2.27 x 10(-7) M with DPV and 1.31 x 10(-7)M with SWV for diamond electrodes in 0.1 M H(2)SO(4) solution. The repeatability of the methods was found good for both electrodes. The methods were fully validated and successfully applied to the high-throughput determination of the drug in tablets, human serum and human urine with good recoveries. 相似文献
3.
The oxidative behaviour of, a hypnotic drug, zolpidem was studied at glassy carbon electrode in Britton-Robinson buffer over the pH range 2.0-11.0 using cyclic, linear sweep and differential pulse voltammetry. Oxidation of the drug was effected in a single irreversible, diffusion-controlled step. Using differential pulse voltammetry (DPV), the drug yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 8.0 at +0.889 V (vs. Ag/AgCl) on glassy carbon electrode. This process could be used to determine zolpidem concentrations in the range 5.0 x 10(-7) M to 1.0 x 10(-5) M with a detection limit of 2.0 x 10(-7) M. The method was applied, without any interference from the excipients, to the determination of the drug in a tablet dosage form. 相似文献
4.
Derya Tarinc Burcu Dogan-Topal Aysegul Golcu Sibel A. Ozkan 《Journal of Analytical Chemistry》2014,69(9):899-908
A voltammetric study of the oxidation of Ceftazidime (CEFT) has been carried out at the glassy carbon electrode by cyclic, differential pulse (DPV) and square wave (SWV) voltammetry. The oxidation of CEFT was irreversible and exhibited diffusion controlled process depending on pH. The oxidation mechanism was proposed and discussed. According to the linear relationship between the peak current and concentration, DPV and SWV voltammetric methods for CEFT assay in pharmaceutical dosage forms and human urine were developed. For analytical purposes, a well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H2SO4 at 1.00 and 1.02 V for differential pulse and square wave voltammetric techniques, respectively. The linear response was obtained within the range of 4 × 10?6?8 × 10?5 M with a detection limit of 6 × 10?7 M for differential pulse and 4 × 10?6–2 × 10?4 M with a detection limit of 1 × 10?6 M for square wave voltammetric technique. The determination of CEFT in 0.1 M H2SO4 was possible over the 2 × 10?6–1 × 10?4 M range in urine sample for both techniques. The standard addition method was used for the recovery studies. 相似文献
5.
《Analytical letters》2012,45(12):1913-1931
Abstract A voltammetric study of the oxidation of fexofenadine HCl (FEXO) has been carried out at the glassy carbon electrode. The electrochemical oxidation of FEXO was investigated by cyclic, linear sweep, differential pulse (DPV), and square wave (SWV) voltammetry using glassy carbon electrode. The oxidation of FEXO was irreversible and exhibited diffusion‐controlled process depending on pH. The dependence of intensities of currents and potentials on pH, concentration, scan rate, nature of the buffer was investigated. Different parameters were tested to optimize the conditions for the determination of FEXO. For analytical purposes, a very well resolved diffusion‐controlled voltammetric peak was obtained in Britton‐Robinson buffer at pH 7.0 with 20% constant amount of methanol for DPV and SWV techniques. The linear response was obtained in supporting electrolyte in the ranges of 1.0×10?6–2.0×10?4 M with a detection limit of 6.6×10?9 M and 5.76×10?8 M and in serum samples in the ranges of 2.0×10?6–1.0×10?4 M with a detection limit of 8.08×10?8 M and 4.97×10?8 M for differential pulse and square wave voltammetric techniques, respectively. Only square wave voltammetric technique can be applied to the urine samples, and the linearity was obtained in the ranges of 2.0×10?6–1.0×10?4 M with a detection limit of 2.00×10?7 M. Based on this study, simple, rapid, selective and sensitive two voltammetric methods were developed for the determination of FEXO in dosage forms and biological fluids. For the precision and accuracy of the developed methods, recovery studies were used. The standard addition method was used for the recovery studies. No electroactive interferences were found in biological fluids from the endogenous substances and additives present in tablets. 相似文献
6.
Electrochemical study of fluvastatin sodium – analytical application to pharmaceutical dosage forms, human serum, and simulated gastric juice 总被引:3,自引:0,他引:3
The oxidation of fluvastatin sodium on a glassy carbon electrode has been studied by use of a variety of voltammetric techniques. Different conditions were investigated to optimize the determination of fluvastatin sodium. The dependence of the intensities of currents and potentials on pH, concentration, scan rate, and nature of the buffer was investigated. Oxidation of fluvastatin sodium was found to be diffusion-controlled and irreversible. The best results for the determination of fluvastatin sodium were obtained by using differential pulse and square-wave voltammetric techniques in Britton-Robinson buffer at pH 10.04. Differential pulse and square-wave voltammetry at a glassy carbon electrode resulted in linear calibration in the range 8x10(-6) to 6x10(-4) mol L(-1) and detection limits of 1.07x10(-6) and 7.99x10(-7) mol L(-1), respectively. The proposed methods were successfully applied to the determination of the drug in capsules and biological fluids. Excipients did not interfere with the determination. Statistical validation revealed that the methods were free from significant systematic errors. 相似文献
7.
Aslanoglu M Kutluay A Abbasoglu S Karabulut S 《Chemical & pharmaceutical bulletin》2008,56(3):282-286
A reliable and reproducible method for the determination of uric acid in urine samples has been developed. The method is based on the modification of a glassy carbon electrode by 3-acetylthiophene using cyclic voltammetry. The poly(3-acetylthiophene) modified glassy carbon electrode showed an excellent electrocatalytic effect towards the oxidation of uric acid in 0.1 m phosphate buffer solution (PBS) at pH 7.2. Compared with a bare glassy carbon electrode (GCE), an obvious shift of the oxidation peak potential in the cathodic direction and a marked enhancement of the anodic current response for uric acid were observed. The poly(3-acetylthiophene)/GCE was used for the determination of uric acid using square wave voltammetry. The peak current increased linearly with the concentration of uric acid in the range of 1.25 x 10(-5)-1.75 x 10(-4) M. The detection limit was 5.27 x 10(-7) M by square wave voltammetry. The poly(3-acetylthiophene)/GCE was also effective to determine uric acid and ascorbic acid in a mixture and resolved the overlapping anodic peaks of these two species into two well-defined voltammetric peaks in cyclic voltammetry at 0.030 V and 0.320 V (vs. Ag/AgCl) for ascorbic acid and uric acid, respectively. The modified electrode exhibited stable and sensitive current responses toward uric acid and ascorbic acid. The method has successfully been applied for determination of uric acid in urine samples. 相似文献
8.
The electrochemical oxidation of the antineoplastic agent etoposide was studied at carbon paste electrode in Britton-Robinson buffer solutions over the pH range 2.0-10.0 using cyclic, linear sweep and differential pulse voltammetry. Oxidation of the drug was effected in a single reversible, diffusion-controlled step within the pH range 2.0-4.0, a second oxidation process was produced above pH 4.0. Using differential pulse voltammetry (DPV), the drug yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 3.0 at 0.500 V (vs. Ag/AgCl) on carbon paste electrode. This process could be used to determine etoposide concentrations in the range 2.5 x 10(-7) to 2.5 x 10(-5) M with a detection limit of 1.0 x 10(-7) M. The method was successfully applied to the determination of the drug in spiked human serum. 相似文献
9.
Padmanabhan Santhosh Nagarajan Senthil Kumar Murugesan Renukadevi Anantha Iyengar Gopalan Thiyagarajan Vasudevan Kwang-Pill Lee 《Analytical sciences》2007,23(4):475-478
A glassy carbon electrode modified with a coating of polypyrrole (Ppy) exhibited an attractive performance for the detection and determination of a non-steroidal and non-narcotic analgesic compound, ketorolac tromethamine (KT). Cyclic voltammetry, differential pulse and square wave voltammetry were used in a combined way to identify the electrochemical characteristics and to optimize the conditions for detection. For calibrating and estimating KT, square-wave voltammetry was mainly used. The drug shows a well-defined peak at -1.40 V vs. Ag/AgCl in the acetate buffer (pH 5.5). The existence of Ppy on the surface of the electrode gives higher electrochemical active sites at the electrode for the detection of KT and preconcentrate KT by adsorption. The square-wave stripping voltammetric response depends on the excitation signal and the accumulation time. The calibration curve is linear in the range 1 x 10(-11) to 1 x 10(-7) M with a detection limit of 1.0 x 10(-12) M. Applicability to serum samples was also demonstrated. A detection limit of 1.0 ng ml for serum was observed. Square-wave voltammetry shows superior performance over UV spectroscopy and other techniques. 相似文献
10.
《Electroanalysis》2004,16(3):231-237
The electrochemical oxidation of antipsychotic drug amisulpride (AMS) has been studied in pH range 1.8–11.0 at a stationary glassy carbon electrode by cyclic, differential pulse and square‐wave voltammetry. Two oxidation processes were produced in different supporting electrolyte media. Both of the oxidation processes were irreversible and exhibited diffusion controlled. For analytical purposes, very resolved voltammetric peaks were obtained using differential pulse and square‐wave modes. The linear response was obtained in the range of 4×10?6 to 6×10?4 M for the first and second oxidation steps in Britton‐Robinson buffer at pH 7.0 and pH 3.0 (20% methanol v/v), respectively, using both techniques. These methods were used for the determination of AMS in tablets. The first oxidation process was chosen as indicative of the analysis of AMS in biological media. The methods were successfully applied to spiked human serum, urine and simulated gastric fluid samples. 相似文献
11.
Electrochemical oxidation of luteolin at a glassy carbon electrode and its application in pharmaceutical analysis 总被引:1,自引:0,他引:1
Liu A Zhang S Huang L Cao Y Yao H Chen W Lin X 《Chemical & pharmaceutical bulletin》2008,56(6):745-748
Luteolin is a flavonoid reported to occur widely in many medicinal plants. The electrochemical behavior of luteolin was studied in phosphate buffer solution (PBS) of pH 4.0 at a glassy carbon electrode (GCE) by cyclic voltammetry (CV) and differential pulse voltammetric method (DPV). The results indicated the well-defined redox peak of luteolin which was involving two electrons and two protons was observed and the electrode process is adsorption-controlled. The charge transfer coefficient (alpha) was calculated as 0.66. The relationships between oxidation peak current and the concentration of luteolin are linear in the range of 1.0 x 10(-8) - 1.0 x 10(-6) M by DPV method. The detection limit had been estimated as 5.0 x 10(-9) M. The facile and rapid method has been successfully applied to the detection of luteolin in tablets. 相似文献
12.
Vela MH Quinaz Garcia MB Montenegro MC 《Fresenius' Journal of Analytical Chemistry》2001,369(7-8):563-566
The electrochemical behaviour of sertraline at a hanging mercury drop electrode (HMDE) was described. Different voltammetric techniques, such as cyclic, linear sweep, differential pulse and square wave voltammetry, were used. Voltammograms were obtained at different pH values with a Britton-Robinson buffer solution used as supporting electrolyte. The best results were found by square wave voltammetry with electrodeposition at alkaline pH using a borate buffer with a pH = 8.2 for the samples, containing 12% (v/v) methanol. Under optimised conditions, a linear relationship between 2.33 x 10(-7) and 3.15 x 10(-6) M of sertraline with a limit of detection of 1.98 x 10(-7) M was obtained. The electrochemical method developed was applied to the determination of sertraline in pharmaceutical formulations. Recoveries were close to 100%, thus proving efficacy of the proposed method for the quantification of sertraline in commercial samples. 相似文献
13.
The electrooxidative behavior and determination of Tamsulosin HCl (TAM), one of the alpha(1)-adrenoceptor antagonist, on a glassy carbon disc electrode were investigated for the first time by using cyclic, linear sweep, differential pulse (DPV) and square wave voltammetry (SWV). TAM showed an irreversible oxidation behavior at all pH values and buffers studied. From the electrochemical response, the main oxidation step was found to be related to the methoxy group on the phenyl ring. DPV and SWV were used to generate peak current versus concentration curves for TAM. A linear response was obtained in the range comprised between 2x10(-6) and 4x10(-4) M for both techniques with detection limit of 3.34x10(-7) M for DPV and 2.45x10(-7) M for SWV. The methods were proposed for the determination of TAM in dosage forms adopting both DPV and SWV modes. The methods were extended to the in vitro determination of TAM in spiked serum samples. 相似文献
14.
The anodic behavior and determination of pefloxacin on boron-doped diamond and glassy carbon electrodes were investigated using cyclic, linear sweep, differential pulse and square wave voltammetric techniques. In cyclic voltammetry, pefloxacin shows one main irreversible oxidation peak and additional one irreversible ill-defined wave depending on pH values for both electrodes. The results indicate that the process of pefloxacin is irreversible and diffusion controlled on boron-doped diamond electrode and irreversible but adsorption controlled on glassy carbon electrode. The peak current is found to be linear over the range of concentration 2 × 10−6 to 2 × 10−4 M in 0.5 M H2SO4 at about +1.20 V (versus Ag/AgCl) for differential pulse and square wave voltammetric technique using boron-doped diamond electrode. The repeatability, reproducibility, precision and accuracy of the methods in all media were investigated. Selectivity, precision and accuracy of the developed methods were also checked by recovery studies. The procedures were successfully applied to the determination of the drug in pharmaceutical dosage forms and humans serum samples with good recovery results. No electroactive interferences from the excipients and endogenous substances were found in the pharmaceutical dosage forms and biological samples, respectively. 相似文献
15.
A new, simple and low cost voltammetric method for the determination of cefpirome in pharmaceutical preparations has been developed using multiwalled carbon nanotube modified glassy carbon electrode (MWCNT), which showed stable response with enhanced selectivity and sensitivity over the bare glassy carbon electrode. A multiwalled carbon nanotube (MWCNT) modified glassy carbon electrode (GCE) is used for the simultaneous determination of cefpirome by differential pulse voltammetry and square wave voltammetry. Results indicated that cathodic peak of cefpirome is greatly improved at MWCNT modified GC electrode as compared with the bare GC electrode showing excellent electrocatalytic activity towards cefpirome reduction. Linear calibration curves are obtained over the concentration range 100-600 μg mL(-1) in Britton Robinson buffer at pH 4.51 with limit of detection (LOD) and limit of quantification (LOQ) are 0.647 μg mL(-1) and 2.159 μg mL(-1) using SWV and 5.540 μg mL(-1) and 18.489 μg mL(-1) using DPV, respectively. The described method is rapid and can be successfully applied for the determination of cefpirome in bulk form and pharmaceutical formulations. 相似文献
16.
Burcu Dogan‐Topal Nurgul K. Bakirhan Tugba Taskin Tok Sibel A. Ozkan 《Electroanalysis》2020,32(1):37-49
A sensitive voltammetric technique has been developed for the determination of Fludarabine using amine‐functionalized multi walled carbon nanotubes modified glassy carbon electrode (NH2‐MWCNTs/GCE). Molecular dynamics simulations, an in silico technique, were employed to examine the properties including chemical differences of Fludarabine‐ functionalized MWCNT complexes. The redox behavior of Fludarabine was examined by cyclic, differential pulse and square wave voltammetry in a wide pH range. Cyclic voltammetric investigations emphasized that Fludarabine is irreversibly oxidized at the NH2‐MWCNTs/GCE. The electrochemical behavior of Fludarabine was also studied by cyclic voltammetry to evaluate both the kinetic (ks and Ea) and thermodynamic (ΔH, ΔG and ΔS) parameters on NH2‐MWCNTs/GCE at several temperatures. The mixed diffusion‐adsorption controlled electrochemical oxidation of Fludarabine revealed by studies at different scan rates. The experimental parameters, such as pulse amplitude, frequency, deposition potential optimized for square‐wave voltammetry. Under optimum conditions in phosphate buffer (pH 2.0), a linear calibration curve was obtained in the range of 2×10?7 M–4×10?6 M solution using adsorptive stripping square wave voltammetry. The limit of detection and limit of quantification were calculated 2.9×10?8 M and 9.68×10?8 M, respectively. The developed method was applied to the simple and rapid determination of Fludarabine from pharmaceutical formulations. 相似文献
17.
E. Manuela P. J. Garrido Jorge M. P. J. Garrido Mário Esteves Alice Santos‐Silva M. Paula M. Marques Fernanda Borges 《Electroanalysis》2008,20(13):1454-1462
The oxidative behavior of viloxazine was studied at a glassy carbon electrode in different buffer systems using cyclic, differential pulse and square‐wave voltammetry. The oxidation process was shown to be diffusion‐controlled and irreversible over the studied pH. The voltammetric study of the model compounds, 2‐ethoxyanisole and morpholine, associated with quantum mechanical (DFT) calculations, allowed to elucidate the oxidation mechanism of viloxazine. An analytical method was developed for the quantification of viloxazine using an acetate pH 5 buffer solution as a supporting electrolyte. A linear response was obtained in the range 7 to 45 μM, with a detection limit of 0.8 μM. Validation parameters such as sensitivity, precision and accuracy were evaluated. The proposed method was successfully applied to the determination of viloxazine in pharmaceutical formulations and in human serum. The results were statistically compared with those obtained through an established high‐performance liquid chromatography technique, no significant differences having been found between the two methods. 相似文献
18.
The differential pulse voltammetric (DPV) indirect determination of aluminium using L-dopa under alkaline conditions on a glassy carbon working electrode was studied. The proposed method relies on the linear decrease of the DPV anodic peak current of L-dopa with increase in the concentration of aluminium added. Under the optimum experimental conditions (pH 8.5, 0.08 M NH4Cl-NH3.H2O buffer solution, and 4 x 10(-4) M L-dopa), the linear range is 2-18 x 10(-7) M AlIII. The detection limit is 7.6 x 10(-8) M and the relative standard deviation for 8 x 10(-7) M AlIII is 3.5% (n = 8). A number of foreign species were examined as potential interferents. The method was applied to the determination of aluminium in drinking waters, synthetic renal dialysate, sodium chloride injection, sucrafate, hydrothorax, blood, urine and hair samples. The physiological significance is discussed. 相似文献
19.
《Analytical letters》2012,45(6):976-990
The electrochemical oxidation of riluzole was investigated using cyclic and linear sweep voltammetry. Under optimized conditions, current and concentration showed linear dependence in Britton Robinson buffer at pH 3.00 for boron doped diamond and pH 3.00 phosphate buffers for glassy carbon electrodes. Differential pulse and square wave voltammetry were used for the determination of riluzole levels in serum samples and pharmaceutical formulations. The limit of detections were found as 5.25 × 10?7 M and 8.26 × 10?8 M for glassy carbon electrode and 1.78 × 10?7 M and 8.42 × 10?8 M for boron-doped diamond electrodes, in serum samples, using differential pulse and square wave methods, respectively. 相似文献
20.
Dilek Kul 《Journal of Analytical Chemistry》2014,69(10):970-981
Tolterodine tartrate, a muscarinic receptor antagonist, was oxidized in various buffer media with different pH values using cyclic, differential pulse, and square wave voltammetric techniques on glassy carbon and boron-doped diamond electrodes. Two irreversible anodic peaks were obtained. The oxidation process of tolterodine tartrate was diffusion controlled depending on pH for both electrodes. A detailed oxidation mechanism was proposed and discussed. The dependences of the peak current and peak potentials on pH, concentration, nature of the buffer, and scan rate were investigated. A linear response between the peak current and the tolterodine tartrate concentration was obtained using differential pulse and square wave voltammetric techniques in the range of 0.4–8.0 μM for the peak at lower potential in acetate buffer at pH 5.7 and 0.4–40.0 μM for the peak at higher potential in 0.1 M H2SO4 on glassy carbon electrode and in the range of 0.4–40.0 μM in Britton-Robinson buffer at pH 11.0 on boron-doped diamond electrode. Limit of detection values varied between 0.04 and 0.13 μM for both techniques and electrodes. The repeatability, reproducibility, precision, and accuracy of the proposed methods were investigated. The recovery studies were also achieved to check selectivity, precision, and accuracy of the methods. The proposed methods were successfully applied to determine tolterodine tartrate from pharmaceutical dosage forms without any interference from inactive excipients. 相似文献